Evaluating the use of IT by the third party logistics in South East Asia to achieve competitive advantage and its future trend

As the number of using 3PL providers are increasing rapidly in recent years, 3PL providers play a major role in the logistics industry. Due to customers demands are raising and changing, it has facilitated 3PL providers to invest IT systems that could meet customer requirements and create competitive advantage. The use of IT systems could assist 3PL providers to achieve supply chain visibility and enhance supply chain collaboration with business partners. In this paper, it is mainly focus on the Europe and Far East 3PL providers in terms of current and future IT systems, IT motivators and barriers, as well as the future supply chain demands that address by IT systems. The common IT system that implemented in both regions is information technology, which is mainly used to collaborate and share information with supply chain partners. Some of the common motivations and barriers were existed and 3PL providers need to be understood. Given the future demands of IT implementation and supply chain collaboration, IT systems such as RFID and integration systems would be strongly focus in the future. The suggestion about the advanced integration system such as business process management (BPM) could be the next key IT systems in the future logistics industry. © 2012 AICIT.

Comparison of software developed for FHR extraction from PCG signals

A valuable alternative to US cardiotocography, for fetal surveillance, can be offered by phonocardiography, a passive and low cost acoustic recording of fetal heart sounds. A crucial point is the exact recognizing of the fetal heart sounds, associated to each fetal heart beat, and then the estimation of FHR signal. In this work, software for FHR assessment from phonocardiographic signals was developed. To check the reliability of the software, obtained results were compared with those of simultaneously recorded cardiotocographic signals. Results seemed to be satisfying, as provided FHR series were almost all confined within FHR-CTG +/- 3 bpm, where FHR-CTG were FHR series provided by commercial US cardiotocographic devices, currently employed in clinical routine.

A micro-opto-electro-mechanical system (MOEMS) for microstructure manipulation

Microstructure manipulation is a fundamental process to the study of biology and medicine, as well as to advance micro- and nano-system applications. Manipulation of microstructures has been achieved through various microgripper devices developed recently, which lead to advances in micromachine assembly, and single cell manipulation, among others. Only two kinds of integrated feedback have been demonstrated so far, force sensing and optical binary feedback. As a result, the physical, mechanical, optical, and chemical information about the microstructure under study must be extracted from macroscopic instrumentation, such as confocal fluorescence microscopy and Raman spectroscopy. In this research work, novel Micro-Opto-Electro-Mechanical-System (MOEMS) microgrippers are presented. These devices utilize flexible optical waveguides as gripping arms, which provide the physical means for grasping a microobject, while simultaneously enabling light to be delivered and collected. This unique capability allows extensive optical characterization of the structure being held such as transmission, reflection, or fluorescence. The microgrippers require external actuation which was accomplished by two methods: initially with a micrometer screw, and later with a piezoelectric actuator. Thanks to a novel actuation mechanism, the "fishbone", the gripping facets remain parallel within 1 degree. The design, simulation, fabrication, and characterization are systematically presented. The devices mechanical operation was verified by means of 3D finite element analysis simulations. Also, the optical performance and losses were simulated by the 3D-to-2D effective index (finite difference time domain FDTD) method as well as 3D Beam Propagation Method (3D-BPM). The microgrippers were designed to manipulate structures from submicron dimensions up to approximately 100 μm. The devices were implemented in SU-8 due to its suitable optical and mechanical properties. This work demonstrates two practical applications: the manipulation of single SKOV-3 human ovarian carcinoma cells, and the detection and identification of microparts tagged with a fluorescent "barcode" implemented with quantum dots. The novel devices presented open up new possibilities in the field of micromanipulation at the microscale, scalable to the nano-domain.

Analyse de spectres FUSE d'étoiles naines blanches riches en hélium et mesure de leur abondance en carbone

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

A completely kinematostatically decoupled XY compliant parallel manipulator through new topology structure

This paper deals with a completely kinematostaticaly decoupled XY compliant parallel manipulator (CPM) composed of exactly-constrained compliant modules. A new 4-PP XY translational parallel mechanism (TPM) with a new topology structure is firstly proposed where each two P (P: prismatic) joints on the base in two non-adjacent legs are rigidly connected. A novel 4-PP XY CPM is then obtained by replacing each traditional P join on the base in the 4-PP XY TPM with a compound basic parallelogram module (CBPM) and replacing each traditional P joint on the motion stage with a basic parallelogram module (BPM). Approximate analytical model is derived with comparison to the FEA (finite element analysis) model and experiment for a case study. The proposed novel XY CPM has a compact configuration with good dynamics, and is able to well constrain the parasitic rotation and the cross-axis coupling of the motion stage. The cross-axis motion of the input stage can be completely eliminated, and the lost motion between the input stage and the motion stage is significantly reduced.

Analyse de spectres FUSE d'étoiles naines blanches riches en hélium et mesure de leur abondance en carbone

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

A Micro-Opto-Electro-Mechanical System (MOEMS) for Microstructure Manipulation

Microstructure manipulation is a fundamental process to the study of biology and medicine, as well as to advance micro- and nano-system applications. Manipulation of microstructures has been achieved through various microgripper devices developed recently, which lead to advances in micromachine assembly, and single cell manipulation, among others. Only two kinds of integrated feedback have been demonstrated so far, force sensing and optical binary feedback. As a result, the physical, mechanical, optical, and chemical information about the microstructure under study must be extracted from macroscopic instrumentation, such as confocal fluorescence microscopy and Raman spectroscopy. In this research work, novel Micro-Opto-Electro-Mechanical-System (MOEMS) microgrippers are presented. These devices utilize flexible optical waveguides as gripping arms, which provide the physical means for grasping a microobject, while simultaneously enabling light to be delivered and collected. This unique capability allows extensive optical characterization of the structure being held such as transmission, reflection, or fluorescence. The microgrippers require external actuation which was accomplished by two methods: initially with a micrometer screw, and later with a piezoelectric actuator. Thanks to a novel actuation mechanism, the “fishbone”, the gripping facets remain parallel within 1 degree. The design, simulation, fabrication, and characterization are systematically presented. The devices mechanical operation was verified by means of 3D finite element analysis simulations. Also, the optical performance and losses were simulated by the 3D-to-2D effective index (finite difference time domain FDTD) method as well as 3D Beam Propagation Method (3D-BPM). The microgrippers were designed to manipulate structures from submicron dimensions up to approximately 100 µm. The devices were implemented in SU-8 due to its suitable optical and mechanical properties. This work demonstrates two practical applications: the manipulation of single SKOV-3 human ovarian carcinoma cells, and the detection and identification of microparts tagged with a fluorescent “barcode” implemented with quantum dots. The novel devices presented open up new possibilities in the field of micromanipulation at the microscale, scalable to the nano-domain.

Understanding Teacher and Student Learning Situated in a School-wide Implementation of Fractions Instruction

Thesis (Ph.D.)--University of Washington, 2016-06

Analise das melhores práticas em business process management: estudo de casos em organizações hospitalares de Natal/RN

O gerenciamento dos processos organizacionais vem sendo estudado pela ciência administrativa como forma de romper com o paradigma da estrutura organizacional funcional através da Gestão por Processos. O Business Process Management ( BPM alinhado às estratégias organizacionais e suportado cada vez mais pela Tecnologia da Informação (TI), proporciona clareza nas diversas pontas do processo colaborando para sua melhoria contínua com o objetivo de gerar valor agregado ao cliente. As organizações de saúde estão entre as empresas prestadoras de serviço pouco estudadas em relação ao gerenciamento por processos. Assim, este estudo analisou por meio de um estudo empírico de natureza qualitativa, como estão sendo conduzidos os processos organizacionais hospitalares à luz das melhores práticas em BPM. A pesquisa foi realizada através do estudo de casos múltiplos realizados em duas organizações hospitalares na cidade de Natal/RN. A literatura de referência apresentou diversos fatores para um desempenho otimizado em BPM, tratados nesta pesquisa como as melhores práticas em BPM. A partir da revisão da literatura foi elaborada uma síntese das melhores práticas de BPM que serviu de base para elaboração do modelo da pesquisa utilizado para coleta e análise dos dados. Este modelo indicou onze categorias que foram utilizadas para elaboração do roteiro de estrevistas semi-estruturadas, através da técnica de análise de conteúdo, com categorização de grade fechada. As categorias foram agrupadas em duas dimensões: Elementos relacionados à gestão ( governança ; liderança , alinhamento estratégico , cultura e conhecimento ) e elementos relacionados aos processos ( desenho , responsável , executores , tecnologia da informação e indicadores ), e ainda foi identificada uma terceira categoria: escritório de processos . Para seleção dos sujeitos desta pesquisa foi adotada a estratégia em cadeia ou bola de neve . Foi possível identificar que todas as categorias apontadas no modelo de pesquisa emergem entre os fatores buscados pelas organizações hospitalares para o gerenciamento por processos com destaque para categorias: cultura ; conhecimento ; desenho ; tecnologia da informação e indicadores . Em complemento às categorias de análise, foram identificadas dificuldades relacionadas à comunicação e integração dos diversos elos do processo. Além disso, constatou-se que nos hospitais investigados há um desvio do conceito de BPM no que diz respeito a seu objetivo final: agregar valor ao cliente. A pesquisa concluiu que o gerenciamento por processos nas organizações hospitalares investigadas encontra-se em fase inicial ou em desenvolvimento, sendo necessário superar as barreiras da comunicação e edificar uma cultura organizacional orientada às necessidades dos clientes para aplicação das melhores práticas de BPM, desta forma pesquisas futuras sobre este tema em outras organizações hospitalares, podem facilitar um estudo comparativo e ampliar o conhecimento no assunto

A MODEL FOR EVALUATING IMPACT OF BUSINESS PROCESS MANAGEMENT IN ORGANIZATIONAL PERFORMANCE

Business Process Management (BPM) is able to organize and frame a company focusing in the improvement or assurance of performance in order to gain competitive advantage. Although it is believed that BPM improves various aspects of organizational performance, there has been a lack of empirical evidence about this. The present study has the purpose to develop a model to show the impact of business process management in organizational performance. To accomplish that, the theoretical basis required to know the elements that configurate BPM and the measures that can evaluate the BPM success on organizational performance is built through a systematic literature review (SLR). Then, a research model is proposed according to SLR results. Empirical data will be collected from a survey of  larg and mid-sized industrial and service companies headquartered in Brazil. A quantitative analysis will be performed using structural equation modeling (SEM) to show if the direct effects among BPM and organizational performance can be considered statistically significant. At the end will discuss these results and their managerial and cientific implications.Keywords: Business process management (BPM). Organizational performance. Firm performance. Business models. Structural Equation Modeling. Systematic Literature Review.

Agro industrialización y comercialización de frijol rojo y negro en Unión de Cooperativas Agropecuarias Augusto César Sandino, San Ramón - Matagalpa: Informe de pasantías 2014

Como forma de culminación de estudios de la carrera de Licenciatura en Desarrollo Rural, se realizó pasantías en la Unión de Cooperativas Augusto César Sandino (UCA, San Ramón). En el proyecto tiene como nombre: Apoyo al desarrollo productivo y agroindustrial del Frijol en organizaciones cooperativas de pequeños productores y productoras de Matagalpa en el período de Abril a Octubre del 2014. La UCA San Ramón es una cooperativa comprometida con el desarrollo económico-social de sus asociados, apoyándoles en la formación de capacidades, promueve la equidad de género, protección del medio ambiente flora y fauna ,aplicación de las buenas prácticas agrícolas (BPM), Promoción del turismo rural sostenible, apoyo al sector agrícola en los diferentes rubros(Café, Granos Básicos, Ganado).La UCA San Ramón, también otorga becas a estudiantes hijos de socios para que culminen sus estudios y que retornen a trabajar en la institución con el propósito de mejorar el relevo generacional. El trabajo del pasante estuvo enfocado en el área de planificación y proyectos que se desarrollan dentro de la institución misma, los cuales están dirigidos a promover la formulación, gestión, evaluación y gerencia de proyectos sociales, para los socios, llevando a cabo la siguiente funcione: Elaboración de plan de Negocios, para el cual es el pasante desarrollo las siguientes funciones: Análisis de información primaria y secundaria; Sondeos para analizar la competencia en presentaciones de frijol (Crudos, molidos, cocidos)en supermercados, Capacitaciones en uso de maquinaria de planta procesadora de frijol; Registros y control de actividades de la planta. El plan de negocios que se diseñó dio como resultado la demostración de una factibilidad sobre la comercialización de frijol procesado en diferentes presentaciones conforme a las demandas de los consumidores, el análisis de información primaria permitió conocer la demanda sobre gustos y preferencias de los consumidores, según los sondeos realizados demuestran que el frijol crudo tiene mayor demanda, los registros y controles en la planta complementan los documentos realizados dentro de la institución misma, la realización de esta pasantía fue de gran importancia y lección aprendida ya que el pasante debe estar accesible a adquirir conocimientos novedosos que complementan su trabajo como profesional, el espíritu de responsabilidad y confianza es muy valioso al momento de llegar formalizar un acuerdo permite evitar conflictos en un futuro. Como conclusión se puede decir que a medida que se va ejecutando las pasantías hace familiar la labor y se va obteniendo nuevos conocimientos amplios sobre la misma; tratándose de un periodo de nuevas enseñanzas y experiencias que se basan en los conocimientos adquiridos en el aula de clase y para alcanzar mejores oportunidades en el campo laboral. Como una recomendación enfocada a la Universidad, es dar mejor seguimiento para los pasantes durante el periodo de pasantías constando en supervisión a este.