846 resultados para Architectural conception
Resumo:
In two Italian sites, multiaxis trees slightly reduced primary axis length and secondary axis length of newly grafted trees, and increased the number of secondary shoots. The total length, node production, and total dry matter gain were proportional to the number of axis. Growth of both primary and secondary shoots, and dry matter accumulation, have been found to be also well related to rootstock vigour. A great variability in axillary shoot production was recorded among different environments. Grafted trees had higher primary growth, secondary axis growth, and dry matter gain than chip budded trees. Stem water potential measured in the second year after grafting was not affected by rootstocks or number of leaders. Measurements performed in New Zealand (Hawke’s Bay) during the second year after grafting revealed that both final length and growth rate of primary and secondary axis were related to the rootstock rather than to the training system. Dwarfing rootstocks reduced the number of long vegetative shoots and increased the proportion of less vigorous shoots.
Resumo:
Obiettivo principale della ricerca è quello di aggiungere un tassello mancante, attraverso una nuova chiave di lettura, alla complessa attività artistico-teorica dell’artista futurista Enrico Prampolini (1894-1956). Questa tesi, oltre a riordinare e raccogliere tutto ciò che riguarda l’architettura e il rapporto di quest’ultima con le arti nell'opera di Prampolini, coglie l’occasione per puntualizzarne aspetti ancora poco esplorati, grazie anche all'analisi inedita dei documenti originali dell'artista conservati presso il CRDAV del Museo d’arte contemporanea di Roma. Partendo dall'analisi dei rapporti dell’artista modenese con le avanguardie straniere, la ricerca prosegue con la presa in esame dei manifesti, degli scritti e degli articoli noti e inediti legati alla teoria architettonica nella produzione dell’artista modenese. Il nucleo centrale della ricerca è costituito dagli elementi inediti emersi presso l’Archivio Prampolini consistenti in relazioni di progetti architettonici per un Piano urbanistico del Centro Alberghiero di Castel Fusano (1938) e per due alberghi nel centro di Roma (1938-1939). La seconda parte della ricerca si concentra sull'analisi del rapporto tra arte e architettura nel Futurismo e sul fondamentale contributo dato in tal senso da Prampolini, in particolare attraverso la “plastica murale”, come completamento dell’architettura futurista e fascista e la concezione dell’Arte Polimaterica. Nell'ultima parte della ricerca si affronta infine l'analisi del rapporto tra arte e architettura gestito in ambito istituzionale in Italia tra le due guerre, con l’emanazione, nel 1942, della legge detta “del 2%”. Aspetto finora inedito delle vicende legate alla “legge del 2%” è l'emergere del ruolo centrale di Prampolini nel contribuire al dibattito che portò alla sua approvazione, e non secondariamente nella ricerca di migliori condizioni economiche e maggiori occasioni di lavoro per gli artisti. La figura di Enrico Prampolini emerge dunque, da questa ricerca, come un nodo fondamentale per comprendere alcuni degli aspetti ancora inesplorati della cultura artistico-architettonica italiana degli anni Venti-Quaranta.
Resumo:
The research aims at developing a framework for semantic-based digital survey of architectural heritage. Rooted in knowledge-based modeling which extracts mathematical constraints of geometry from architectural treatises, as-built information of architecture obtained from image-based modeling is integrated with the ideal model in BIM platform. The knowledge-based modeling transforms the geometry and parametric relation of architectural components from 2D printings to 3D digital models, and create large amount variations based on shape grammar in real time thanks to parametric modeling. It also provides prior knowledge for semantically segmenting unorganized survey data. The emergence of SfM (Structure from Motion) provides access to reconstruct large complex architectural scenes with high flexibility, low cost and full automation, but low reliability of metric accuracy. We solve this problem by combing photogrammetric approaches which consists of camera configuration, image enhancement, and bundle adjustment, etc. Experiments show the accuracy of image-based modeling following our workflow is comparable to that from range-based modeling. We also demonstrate positive results of our optimized approach in digital reconstruction of portico where low-texture-vault and dramatical transition of illumination bring huge difficulties in the workflow without optimization. Once the as-built model is obtained, it is integrated with the ideal model in BIM platform which allows multiple data enrichment. In spite of its promising prospect in AEC industry, BIM is developed with limited consideration of reverse-engineering from survey data. Besides representing the architectural heritage in parallel ways (ideal model and as-built model) and comparing their difference, we concern how to create as-built model in BIM software which is still an open area to be addressed. The research is supposed to be fundamental for research of architectural history, documentation and conservation of architectural heritage, and renovation of existing buildings.
Resumo:
La ricerca è volta a presentare un nuovo approccio integrato, a supporto di operatori e progettisti, per la gestione dell’intero processo progettuale di interventi di riqualificazione energetica e architettonica del patrimonio edilizio recente, mediante l’impiego di soluzioni tecnologiche innovative di involucro edilizio. Lo studio richiede necessariamente l’acquisizione di un repertorio selezionato di sistemi costruttivi di involucro, come base di partenza per l’elaborazione di soluzioni progettuali di recupero delle scuole appartenenti al secondo dopoguerra, in conglomerato cementizio armato, prevalentemente prefabbricate. Il progetto individua procedimenti costruttivi ecocompatibili per la progettazione di componenti prefabbricati di involucro “attivo”, adattabile ed efficiente, da assemblare a secco, nel rispetto dei requisiti prestazionali richiesti dalle attuali normative. La ricerca è finalizzata alla gestione dell’intero processo, supportato da sistemi di rilevazione geometrica, collegati a software di programmazione parametrica per la modellazione di superfici adattabili alla morfologia dei fabbricati oggetto di intervento. Tali strumenti informatizzati CAD-CAM sono connessi a macchine a controllo numerico CNC per la produzione industrializzata degli elementi costruttivi “su misura”. A titolo esemplificativo dell’approccio innovativo proposto, si formulano due possibili soluzioni di involucro in linea con i paradigmi della ricerca, nel rispetto dei principi di sostenibilità, intesa come modularità, rapidità di posa, reversibilità, recupero e riciclo di materiali. In particolare, le soluzioni innovative sono accomunate dall’applicazione di una tecnica basata sull’assemblaggio di elementi prefabbricati, dall’adozione di una trama esagonale per la tassellazione della nuova superficie di facciata, e dall’utilizzo del medesimo materiale termico isolante, plastico e inorganico, riciclato ed ecosostenibile, a basso impatto ambientale (AAM - Alkali Activated Materials). Le soluzioni progettuali proposte, sviluppate presso le due sedi coinvolte nella cotutela (Università di Bologna, Université Paris-Est) sono affrontate secondo un protocollo scientifico che prevede: progettazione del sistema costruttivo, analisi meccanica e termica, sperimentazione costruttiva, verifica delle tecniche di messa in opera e dei requisiti prestazionali.
Resumo:
Theoretical studies of the problems of the securities markets in the Russian Federation incline to one or other of the two traditional approaches. The first consists of comparing the definition of "valuable paper" set forth in the current legislation of the Russian Federation, with the theoretical model of "Wertpapiere" elaborated by German scholars more than 90 years ago. The problem with this approach is, in Mr. Pentsov's opinion, that any new features of the definition of "security" that do not coincide with the theoretical model of "Wertpapiere" (such as valuable papers existing in non-material, electronic form) are claimed to be incorrect and removed from the current legislation of the Russian Federation. The second approach works on the basis of the differentiation between the Common Law concept of "security" and the Civil Law concept of "valuable paper". Mr. Pentsov's research, presented in an article written in English, uses both methodological tools and involves, firstly, a historical study of the origin and development of certain legal phenomena (securities) as they evolved in different countries, and secondly, a comparative, synchronic study of equivalent legal phenomena as they exist in different countries today. Employing the first method, Mr. Pentsov divided the historical development of the conception of "valuable paper" in Russia into five major stages. He found that, despite the existence of a relatively wide circulation of valuable papers, especially in the second half of the 19th century, Russian legislation before 1917 (the first stage) did not have a unified definition of valuable paper. The term was used, in both theoretical studies and legislation, but it covered a broad range of financial instruments such as stocks, bonds, government bonds, promissory notes, bills of exchange, etc. During the second stage, also, the legislation of the USSR did not have a unified definition of "valuable paper". After the end of the "new economic policy" (1922 - 1930) the stock exchanges and the securities markets in the USSR, with a very few exceptions, were abolished. And thus during the third stage (up to 1985), the use of valuable papers in practice was reduced to foreign economic relations (bills of exchange, stocks in enterprises outside the USSR) and to state bonds. Not surprisingly, there was still no unified definition of "valuable paper". After the beginning of Gorbachev's perestroika, a securities market began to re-appear in the USSR. However, the successful development of securities markets in the USSR was retarded by the absence of an appropriate regulatory framework. The first effort to improve the situation was the adoption of the Regulations on Valuable Papers, approved by resolution No. 590 of the Council of Ministers of the USSR, dated June 19, 1990. Section 1 of the Regulation contained the first statutory definition of "valuable paper" in the history of Russia. At the very beginning of the period of transition to a market economy, a number of acts contained different definitions of "valuable paper". This diversity clearly undermined the stability of the Russian securities market and did not achieve the goal of protecting the investor. The lack of unified criteria for the consideration of such non-standard financial instruments as "valuable papers" significantly contributed to the appearance of numerous fraudulent "pyramid" schemes that were outside of the regulatory scheme of Russia legislation. The situation was substantially improved by the adoption of the new Civil Code of the Russian Federation. According to Section 1 of Article 142 of the Civil Code, a valuable paper is a document that confirms, in compliance with an established form and mandatory requisites, certain material rights whose realisation or transfer are possible only in the process of its presentation. Finally, the recent Federal law No. 39 - FZ "On the Valuable Papers Market", dated April 22 1996, has also introduced the term "emission valuable papers". According to Article 2 of this Law, an "emission valuable paper" is any valuable paper, including non-documentary, that simultaneously has the following features: it fixes the composition of material and non-material rights that are subject to confirmation, cession and unconditional realisation in compliance with the form and procedure established by this federal law; it is placed by issues; and it has equal amount and time of realisation of rights within the same issue regardless of when the valuable paper was purchased. Thus the introduction of the conception of "emission valuable paper" became the starting point in the Russian federation's legislation for the differentiation between the legal regimes of "commercial papers" and "investment papers" similar to the Common Law approach. Moving now to the synchronic, comparative method of research, Mr. Pentsov notes that there are currently three major conceptions of "security" and, correspondingly, three approaches to its legal definition: the Common Law concept, the continental law concept, and the concept employed by Japanese Law. Mr. Pentsov proceeds to analyse the differences and similarities of all three, concluding that though the concept of "security" in the Common Law system substantially differs from that of "valuable paper" in the Continental Law system, nevertheless the two concepts are developing in similar directions. He predicts that in the foreseeable future the existing differences between these two concepts will become less and less significant. On the basis of his research, Mr. Pentsov arrived at the conclusion that the concept of "security" (and its equivalents) is not a static one. On the contrary, it is in the process of permanent evolution that reflects the introduction of new financial instruments onto the capital markets. He believes that the scope of the statutory definition of "security" plays an extremely important role in the protection of investors. While passing the Securities Act of 1933, the United States Congress determined that the best way to achieve the goal of protecting investors was to define the term "security" in sufficiently broad and general terms so as to include within the definition the many types of instruments that in the commercial world fall within the ordinary concept of "security' and to cover the countless and various devices used by those who seek to use the money of others on the promise of profits. On the other hand, the very limited scope of the current definition of "emission valuable paper" in the Federal Law of the Russian Federation entitled "On the Valuable Papers Market" does not allow the anti-fraud provisions of this law to be implemented in an efficient way. Consequently, there is no basis for the protection of investors. Mr. Pentsov proposes amendments which he believes would enable the Russian markets to become more efficient and attractive for both foreign and domestic investors.
Resumo:
Comments on an article by Kashima et al. (see record 2007-10111-001). In their target article Kashima and colleagues try to show how a connectionist model conceptualization of the self is best suited to capture the self's temporal and socio-culturally contextualized nature. They propose a new model and to support this model, the authors conduct computer simulations of psychological phenomena whose importance for the self has long been clear, even if not formally modeled, such as imitation, and learning of sequence and narrative. As explicated when we advocated connectionist models as a metaphor for self in Mischel and Morf (2003), we fully endorse the utility of such a metaphor, as these models have some of the processing characteristics necessary for capturing key aspects and functions of a dynamic cognitive-affective self-system. As elaborated in that chapter, we see as their principal strength that connectionist models can take account of multiple simultaneous processes without invoking a single central control. All outputs reflect a distributed pattern of activation across a large number of simple processing units, the nature of which depends on (and changes with) the connection weights between the links and the satisfaction of mutual constraints across these links (Rummelhart & McClelland, 1986). This allows a simple account for why certain input features will at times predominate, while others take over on other occasions. (PsycINFO Database Record (c) 2008 APA, all rights reserved)
Resumo:
Projects in the area of architectural design and urban planning typically engage several architects as well as experts from other professions. While the design and review meetings thus often involve a large number of cooperating participants, the actual design is still done by the individuals in the time in between those meetings using desktop PCs and CAD applications. A real collaborative approach to architectural design and urban planning is often limited to early paper-based sketches.In order to overcome these limitations, we designed and realized the ARTHUR system, an Augmented Reality (AR) enhanced round table to support complex design and planning decisions for architects. WhileAR has been applied to this area earlier, our approach does not try to replace the use of CAD systems but rather integrates them seamlessly into the collaborative AR environment. The approach is enhanced by intuitiveinteraction mechanisms that can be easily con-figured for different application scenarios.