Anthrax Lethal Factor as an Immune Target in Humans and Transgenic Mice and the Impact of HLA Polymorphism on CD4+ T Cell Immunity

Bacillus anthracis produces a binary toxin composed of protective antigen (PA) and one of two subunits, lethal factor (LF) or edema factor (EF). Most studies have concentrated on induction of toxin-specific antibodies as the correlate of protective immunity, in contrast to which understanding of cellular immunity to these toxins and its impact on infection is limited. We characterized CD4+ T cell immunity to LF in a panel of humanized HLA-DR and DQ transgenic mice and in naturally exposed patients. As the variation in antigen presentation governed by HLA polymorphism has a major impact on protective immunity to specific epitopes, we examined relative binding affinities of LF peptides to purified HLA class II molecules, identifying those regions likely to be of broad applicability to human immune studies through their ability to bind multiple alleles. Transgenics differing only in their expression of human HLA class II alleles showed a marked hierarchy of immunity to LF. Immunogenicity in HLA transgenics was primarily restricted to epitopes from domains II and IV of LF and promiscuous, dominant epitopes, common to all HLA types, were identified in domain II. The relevance of this model was further demonstrated by the fact that a number of the immunodominant epitopes identified in mice were recognized by T cells from humans previously infected with cutaneous anthrax and from vaccinated individuals. The ability of the identified epitopes to confer protective immunity was demonstrated by lethal anthrax challenge of HLA transgenic mice immunized with a peptide subunit vaccine comprising the immunodominant epitopes that we identified.

Novel Supercritical Carbon Dioxide Impregnation Technique for the Production of Amorphous Solid Drug Dispersions: A Comparison to Hot Melt Extrusion

The formulation of BCS Class II drugs as amorphous solid dispersions has been shown to provide advantages with respect to improving the aqueous solubility of these compounds. While hot melt extrusion (HME) and spray drying (SD) are among the most common methods for the production of amorphous solid dispersions (ASDs), the high temperatures often required for HME can restrict the processing of thermally labile drugs, while the use of toxic organic solvents during SD can impact on end-product toxicity. In this study, we investigated the potential of supercritical fluid impregnation (SFI) using carbon dioxide as an alternative process for ASD production of a model poorly water-soluble drug, indomethacin (INM). In doing so, we produced ASDs without the use of organic solvents and at temperatures considerably lower than those required for HME. Previous studies have concentrated on the characterization of ASDs produced using HME or SFI but have not considered both processes together. Dispersions were manufactured using two different polymers, Soluplus and polyvinylpyrrolidone K15 using both SFI and HME and characterized for drug morphology, homogeneity, presence of drug-polymer interactions, glass transition temperature, amorphous stability of the drug within the formulation, and nonsink drug release to measure the ability of each formulation to create a supersaturated drug solution. Fully amorphous dispersions were successfully produced at 50% w/w drug loading using HME and 30% w/w drug loading using SFI. For both polymers, formulations containing 50% w/w INM, manufactured via SFI, contained the drug in the γ-crystalline form. Interestingly, there were lower levels of crystallinity in PVP dispersions relative to SOL. FTIR was used to probe for the presence of drug-polymer interactions within both polymer systems. For PVP systems, the nature of these interactions depended upon processing method; however, for Soluplus formulations this was not the case. The area under the dissolution curve (AUC) was used as a measure of the time during which a supersaturated concentration could be maintained, and for all systems, SFI formulations performed better than similar HME formulations.

Optimising drug solubilisation in amorphous polymer dispersions: rational selection of hot-melt extrusion processing parameters

The aim of this article was to construct a T–ϕ phase diagram for a model drug (FD) and amorphous polymer (Eudragit® EPO) and to use this information to understand the impact of how temperature–composition coordinates influenced the final properties of the extrudate. Defining process boundaries and understanding drug solubility in polymeric carriers is of utmost importance and will help in the successful manufacture of new delivery platforms for BCS class II drugs. Physically mixed felodipine (FD)–Eudragit® EPO (EPO) binary mixtures with pre-determined weight fractions were analysed using DSC to measure the endset of melting and glass transition temperature. Extrudates of 10 wt% FD–EPO were processed using temperatures (110°C, 126°C, 140°C and 150°C) selected from the temperature–composition (T–ϕ) phase diagrams and processing screw speed of 20, 100 and 200rpm. Extrudates were characterised using powder X-ray diffraction (PXRD), optical, polarised light and Raman microscopy. To ensure formation of a binary amorphous drug dispersion (ADD) at a specific composition, HME processing temperatures should at least be equal to, or exceed, the corresponding temperature value on the liquid–solid curve in a F–H T–ϕ phase diagram. If extruded between the spinodal and liquid–solid curve, the lack of thermodynamic forces to attain complete drug amorphisation may be compensated for through the use of an increased screw speed. Constructing F–H T–ϕ phase diagrams are valuable not only in the understanding drug–polymer miscibility behaviour but also in rationalising the selection of important processing parameters for HME to ensure miscibility of drug and polymer.

Cathepsin S: therapeutic, diagnostic, and prognostic potential

Cathepsin S is a member of the cysteine cathepsin protease family. It is a lysosomal protease which can promote degradation of damaged or unwanted proteins in the endo-lysosomal pathway. Additionally, it has more specific roles such as MHC class II antigen presentation, where it is important in the degradation of the invariant chain. Unsurprisingly, mis-regulation has implicated cathepsin S in a variety of pathological processes including arthritis, cancer, and cardiovascular disease, where it becomes secreted and can act on extracellular substrates. In comparison to many other cysteine cathepsin family members, cathepsin S has uniquely restricted tissue expression and is more stable at a neutral pH, which supports its involvement and importance in localised disease microenvironments. In this review, we examine the known involvement of cathepsin S in disease, particularly with respect to recent work indicating its role in mediating pain, diabetes, and cystic fibrosis. We provide an overview of current literature with regards cathepsin S as a therapeutic target, as well as its role and potential as a predictive diagnostic and/or prognostic marker in these diseases.

The Use of High Surface Area Silica and Supercritical Carbon Dioxide to Enhance Solubility of Poorly Water-Soluble Drugs

Purpose Poor water-solubility of BCS class II drugs can limit their commercialization because of reduced oral bioavailability. It has been reported that loading of drug by adsorption onto porous silica would enhance drug solubility due to the increased surface area available for solvent diffusion. In this work, solid dispersions are formed using supercritical carbon dioxide (scCO2). The aim of this research was to characterise the solid-state properties of scCO2 dispersion and to investigate the impact of altering scCO2 processing conditions on final amorphous product performance that could lead to enhancement of drug dissolution rate for BCS class II drugs. Methods Indomethacin (IND) was purchased from Sigma-Aldrich (Dorset, UK) and was used as a model drug with two grades of high surface area silica (average particle sizes 3&[micro] and 7&[micro]), which were obtained directly from Grace-Davison (Germany). Material crystallinity was evaluated using powder X-ray diffraction (PXRD, Rigaku™, miniflex II, Japan) and high-speed differential scanning calorimetry (Hyper-DSC 8000, Perkin Elmer, USA). Materials were placed in a high-pressure vessel consisting of a CO2 cylinder, a Thar™ Technologies P50 high-pressure pump and a 750 ml high-pressure vessel (Thar, USA). Physical mixtures were exposed to CO2 gas above its critical conditions. SEM imaging and elemental analysis were conducted using a Jeol 6500 FEGSEM (Advanced MicroBeam Inc., Austria). Drug release was examined using USP type II dissolution tester (Caleva™, UK). Results The two grades of silica were found to be amorphous using PXRD and Hyper-DSC. Using PXRD, it was shown that an increase in incubation time and pressure resulted in a decrease in the crystalline content. Drug release profiles from the two different silica formulations prepared under the same conditions are shown in Figure 1. It was found that there was a significant enhancement in drug release, which was influenced, by silica type and other experiment conditions such as temperature, pressure and exposure time. SEM imaging and elemental analysis showed drug deposited inside silica pores as well as on the outer surface. Conclusion This project has shown that silica carrier platforms may be used as an alternative approach to generating polymeric solid dispersions of amorphous drugs exhibiting enhanced solubility.

Comparison of Composite Placement Techniques by Recently Qualified Dental Practitioners.

Objectives: To evaluate the placement of composite materials by new graduates using three alternative placement techniques.Methods: A cohort of 34 recently qualified graduates were asked to restore class II interproximal cavities in plastic teeth using three different techniques.

(i) A conventional incremental filling technique (Herculite XRV) using increments no larger than 2-mm with an initial layer on the cervical floor of the box of 1-mm.
(ii) Flowable bulk fill technique (Dentsply SDR) bulk fill placement in a 3-mm layer followed by an incremental fill of a microhybrid resin
(iii) Bulk fill (Kerr Sonicfill) which involved restorations placed in a 5-mm layer.

The operators were instructed in each technique, didactically and with a hands-on demonstration, prior to restoration placement.
All restorations were cured according to manufacturer’s recommendations. Each participant restored 3 teeth, 1 tooth per treatment technique.
The restorations were evaluated using modified USPHS criteria to assess both the marginal adaptation and the surface texture of the restorations. Blind evaluations were carried out independently by two examiners with the aid of magnification (loupes X2.5). Examiners were standardized prior to evaluation.
Results: Gaps between the tooth margins and the restoration or between the layers of the restoration were found in 13 of Group (i), 3 of Group (ii), and 4 of Group (iii)
Statistical analysis revealed a significant difference between the incrementally filled group (i) and the flowable bulk-fill group (ii) (p=0.0043) and between the incrementally filled (i) and the bulk fill groups (iii) (p=0.012) and no statistical difference (p=0.69) between the bulk filled groups Conclusions: Bulk fill techniques may result in a more satisfactory seal of the cavity margins when restoring with composite.

YSOVAR: Mid-infrared Variability Among YSOs in the Star Formation Region GGD12-15

We present an IR-monitoring survey with the Spitzer Space Telescope of the star-forming region GGD 12-15. More than 1000 objects were monitored, including about 350 objects within the central 5′, which is found to be especially dense in cluster members. The monitoring took place over 38 days and is part of the Young Stellar Object VARiability project. The region was also the subject of a contemporaneous 67 ks Chandra observation. The field includes 119 previously identified pre-main sequence star candidates. X-rays are detected from 164 objects, 90 of which are identified with cluster members. Overall, we find that about half the objects in the central 5′ are young stellar objects (YSOs) based on a combination of their spectral energy distribution, IR variability, and X-ray emission. Most of the stars with IR excess relative to a photosphere show large amplitude (>0.1 mag) mid-infrared (mid-IR) variability. There are 39 periodic sources, and all but one is found to be a cluster member. Almost half of the periodic sources do not show IR excesses. Overall, more than 85% of the Class I, flat spectrum, and Class II sources are found to vary. The amplitude of the variability is larger in more embedded YSOs. Most of the Class I/ II objects exhibit redder colors in a fainter state, which is compatible with time-variable extinction. A few become bluer when fainter, which can be explained with significant changes in the structure of the inner disk. A search for changes in the IR due to X-ray events is carried out, but the low number of flares prevented an analysis of the direct impact of X-ray flares on the IR light curves. However, we find that X-ray detected Class II sources have longer timescales for change in the MIR than a similar set of non-X-ray detected Class IIs.

YSOVAR: Mid-infrared Variability in NGC 1333

As part of the Young Stellar Object VARiability (YSOVAR) program, wemonitored NGC 1333 for ∼35 days at 3.6 and 4.5 μm using theSpitzer Space Telescope. We report here on the mid-infrared variabilityof the point sources in the ∼10‧ × ∼20‧ areacentered on 03:29:06, +31:19:30 (J2000). Out of 701 light curves ineither channel, we find 78 variables over the YSOVAR campaign. Abouthalf of the members are variable. The variable fraction for the mostembedded spectral energy distributions (SEDs) (Class I, flat) is higherthan that for less embedded SEDs (Class II), which is in turn higherthan the star-like SEDs (Class III). A few objects have amplitudes(10–90th percentile brightness) in [3.6] or [4.5] > 0.2 mag; amore typical amplitude is 0.1–0.15 mag. The largest color changeis >0.2 mag. There are 24 periodic objects, with 40% of them beingflat SED class. This may mean that the periodic signal is primarily fromthe disk, not the photosphere, in those cases. We find 9 variableslikely to be “dippers,” where texture in the disk occultsthe central star, and 11 likely to be “bursters,” whereaccretion instabilities create brightness bursts. There are 39 objectsthat have significant trends in [3.6]–[4.5] color over thecampaign, about evenly divided between redder-when-fainter (consistentwith extinction variations) and bluer-when-fainter. About a third of the17 Class 0 and/or jet-driving sources from the literature are variableover the YSOVAR campaign, and a larger fraction (∼half) are variablebetween the YSOVAR campaign and the cryogenic-era Spitzer observations(6–7 years), perhaps because it takes time for the envelope torespond to changes in the central source. The NGC 1333 brown dwarfs donot stand out from the stellar light curves in any way except there is amuch larger fraction of periodic objects (∼60% of variable browndwarfs are periodic, compared to ∼30% of the variables overall).

Uma abordagem curricular em matemática no 3º ciclo do ensino básico: um estudo de caso em geometria

Este trabalho debruça-se sobre as práticas de Ensino de Geometria no 3º ciclo do Ensino Básico tendo como principal foco de investigação as práticas de ensino da professora investigadora. O estudo empírico foi realizado em três turmas de 9º ano, da professora investigadora, de Abril a Junho de 2005, numa Escola da região de Trás-os-Montes (designada por Escola A). O trabalho realizado pela professora investigadora com alunos dessas turmas (no 7º em 2002/03, no 8º ano em 2003/04 e no 9º ano até Abril de 2005) constituiu o contexto precursor do estudo. O planeamento, desenvolvimento e reflexão sobre as práticas desenvolvidas foram realizados de forma colaborativa entre a professora investigadora e a critical friend, professora de Matemática a leccionar Matemática a turmas de 9º ano, numa outra Escola, da mesma região de Trás-os-Montes (designada por Escola B). A gestão curricular orientada por pressupostos legais em vigor e por resultados da investigação em Educação e Didáctica da Matemática foi realizada considerando o conhecimento informal e tácito de cada aluno; visou maximizar a aprendizagem matemática de todos os alunos em cada turma mas tendo a preocupação subjacente de proporcionar experiências de aprendizagem diversificadas de forma a favorecer todo o tipo de estilos de aprendizagem. O problema de investigação foi formulado a partir da seguinte questão: Como articular os esforços realizados e desenvolvidos pelo professor na sala de aula, de forma coerente e exequível, para promover aprendizagens significativas nos alunos, nomeadamente no domínio da Geometria? Face ao problema de investigação foram abordadas e estudadas as questões de investigação seguintes: 1. Quais são as características da experiência matemática proporcionada e qual é a sua relação com o que os alunos aprenderam? 2. Quais as características da avaliação implementada enquanto processo regulador das aprendizagens? 3. Qual a relação entre as tarefas de aprendizagem planificadas e as experiências de aprendizagem matemática proporcionadas? 4. Qual o papel das conferências com a critical friend (no desenvolvimento das experiências matemáticas proporcionadas) na gestão curricular? Este trabalho seguiu uma metodologia de investigação de natureza qualitativa baseado num estudo de caso, com uma vertente de investigação-acção, a partir de uma abordagem curricular em Geometria no 3º ciclo do Ensino Básico: a da professora investigadora. A observação participante e uma grande diversidade de documentos recolhidos (tarefas iniciais e reformuladas, cópias de relatórios, diários de bordo, transcrições das gravações áudio das conferências, etc.) constituíram as principais fontes de dados. Também foram considerados dados provenientes de instrumentos mais quantitativos, como de testes e de questionários. A análise de dados tomou como base a unidade de tempo de meio bloco de aulas (45 minutos) e as fases didácticas de realização de tarefas numa escala de investigação meso de forma a respeitar o trabalho na sala de aula e a sua complexidade. A triangulação de diversas fontes de dados permitiu apresentar: i) a experiência matemática proporcionada a partir das tarefas implementadas e os diferentes papéis assumidos pelo professor, pelos pequenos grupos de alunos ou pelo grupo turma; ii) as práticas avaliativas onde foram evidenciadas as diferentes formas de avaliação formativa e o feedback distribuído; iii) o envolvimento induzido e promovido nos alunos relativamente à sua aprendizagem matemática; iv) o papel crucial da critical friend na abordagem curricular em foco. A partir dos testes de competências e do questionário acerca do ensino, da avaliação e do modo de estudar dos alunos (QEAME) foi possível identificar os ganhos e o impacte desta abordagem curricular no desenvolvimento dos três tipos de constelações de competências e as percepções dos alunos relativamente à mediação realizada pela professora investigadora relativamente ao ensino, aprendizagem e métodos de estudo, respectivamente; a Listagem Dinâmica de Perguntas permitiu aumentar a consciência acerca dos itens trabalhados em sala de aula. A principal conclusão deste estudo é de que é possível implementar um currículo que desenvolva e favoreça a aquisição e desenvolvimento de competências na Geometria (desde as mais elementares até às de nível superior – nas diferentes constelações de reprodução, de conexão e de reflexão) onde o trabalho colaborativo entre os professores é fundamental na gestão e desenvolvimento curriculares. Como implicações para a investigação educacional em matemática surge a necessidade de se fomentar estudos investigacionais descritivos e holísticos em salas de aulas normais sobre as opções e razões das práticas de ensino, das actividades de aprendizagem e das diferentes formas de avaliação.

Lichenicidin biosynthesis and search for novel antibacterial peptides

A estirpe Bacillus licheniformis I89 possui a capacidade de produzir alguns compostos com actividade antibacteriana. No presente estudo, a separação desses compostos foi realizada através da aplicação de vários procedimentos, incluindo extracção em fase sólida e cromatografia liquida de alta pressão. Dois destes compostos bioactivos constituem o lantibiótico de classe II lichenicidina e são caracterizados pela massas molecular de 3250 Da (Bliα) e 3020 Da (Bliβ). O cluster responsável pela biossíntese da lichenicidina foi heterologamente expresso em Escherichia coli, constituindo a primeira descrição da produção de um lantibiótico totalmente in vivo num hospedeiro Gram-negativo. Este sistema foi subsequentemente explorado com o objectivo de relacionar cada proteína codificada no cluster genético da lichenicidina na produção dos péptidos Bliα e Bliβ. O desenvolvimento do sistema de trans complementação possibilitou a produção de variantes destes péptidos. A análise das massas moleculares destas variantes assim como a análise dos padrões de fragmentação obtidos por MS/MS permitiu a revisão de algumas das características estruturais previamente proposta para Bliα e Bliβ. A análise dos genes hipoteticamente envolvidos na protecção da estirpe produtora contra a acção antibiótica da lichenicidina revelou, que em E. coli, a sua ausência não resulta no aumento da susceptibilidade a este composto. Verificou-se também que a presença destes genes não é essencial para a produção de lichenicidina em E. coli. Foi também confirmado experimentalmente que a membrana externa da E. coli constitui uma barreira natural para a entrada dos péptidos na célula. De facto, uma das características intrigantes da produção de lichenicidina por uma bactéria de Gram negativo reside no mecanismo de transporte dos dois péptidos através da membrana externa. Neste estudo foi demonstrado que na ausência da proteína de membrana TolC, a massa molecular de Bliα e Bliβ não foi identificada no sobrenadante de E. coli, demonstrando assim que a sua presença no ambiente extra-celular não se devia a um processo de lise bacteriana. Foi ainda avaliada a capacidade da maquinaria biossintética da lichenicidina para produzir o lantibiótico haloduracina, através do processamento de chimeras lichenicidina-haloduracina, contudo, os resultados foram negativos. Verificou-se ainda que em determinadas condições de incubação, a diferenciação da morfologia original da estirpe B. licheniformis I89 pode ocorrer. Esta dissociação implicou a transição da colónia parental e rugosa para uma colónia de aparência mais simples e suave. Desta forma, as diferenças das duas morfologias em termos de taxa de crescimento, esporulação e actividade antibiótica foram investigadas. Considerando especificamente Bliα e Bliβ verificou-se que a abundância destes péptidos nas culturas do fenótipo fino é geralmente inferior aquela identificada nas culturas do fenótipo parental. Por último, a diversidade de elementos genéticos constituintes de péptido sintetases não ribossomais (NRPS) foi investigada em lagoas no centro de Portugal e em solos provenientes de caves do sul de Portugal, revelando a presença de potenciais novas NRPS nestes ambientes.

Effect of sialic acid loss on dendritic cell maturation

Sialic acids are key structural determinants and contribute to the functionality of a number of immune cell receptors. Previously, we demonstrated that differentiation of human dendritic cells (DCs) is accompanied by an increased expression of sialylated cell surface structures, putatively through the activity of the ST3Gal.I and ST6Gal.I sialyltransferases. Furthermore, DC endocytosis was reduced upon removal of the cell surface sialic acid residues by neuraminidase. In the present work, we evaluate the contribution of the sialic acid modifications in DC maturation. We demonstrate that neuraminidase-treated human DCs have increased expression of major histocompatibility complex (MHC) and costimulatory molecules, increased gene expression of specific cytokines and induce a higher proliferative response of T lymphocytes. Together, the data suggest that clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. This postulate is supported by mouse models, where elevated MHC class II and increased maturation of specific DC subsets were observed in DCs harvested from ST3Gal.I(-/-) and ST6Gal.I(-/-) mice. Moreover, important qualitative differences, particularly in the extent of reduced endocytosis and in the peripheral distribution of DC subsets, existed between the ST3Gal.I(-/-) and ST6Gal.I(-/-) strains. Together, the data strongly suggest not only a role of cell surface sialic acid modifications in maturation and functionality of DCs, but also that the sialic acid linkages created by different sialyltransferases are functionally distinct. Consequently, with particular relevance to DC-based therapies, cell surface sialylation, mediated by individual sialyltransferases, can influence the immunogenicity of DCs upon antigen loading.

Time to Left Ventricular Reverse Remodeling after Cardiac Resynchronization Therapy: Better Late than Never

INTRODUCTION: Left ventricular reverse remodeling (LVRR), defined as reduction of end-diastolic and end-systolic dimensions and improvement of ejection fraction, is associated with the prognostic implications of cardiac resynchronization therapy (CRT). The time course of LVRR remains poorly characterized. Nevertheless, it has been suggested that it occurs ≤6 months after CRT. OBJECTIVE: To characterize the long-term echocardiographic and clinical evolution of patients with LVRR occurring >6 months after CRT and to identify predictors of a delayed LVRR response. METHODS: A total of 127 consecutive patients after successful CRT implantation were divided into three groups according to LVRR response: Group A, 19 patients (15%) with LVRR after >6 months (late LVRR); Group B, 58 patients (46%) with LVRR before 6 months (early LVRR); and Group C, 50 patients (39%) without LVRR during follow-up (no LVRR). RESULTS: The late LVRR group was older, more often had ischemic etiology and fewer patients were in NYHA class ≤II. Overall, group A presented LVRR between group B and C. This was also the case with the percentage of clinical response (68.4% vs. 94.8% vs. 38.3%, respectively, p<0.001), and hospital readmissions due to decompensated heart failure (31.6% vs. 12.1% vs. 57.1%, respectively, p<0.001). Ischemic etiology (OR 0.044; p=0.013) and NYHA functional class <III (OR 0.056; p=0.063) were the variables with the highest predictive value for late LVRR. CONCLUSIONS: Late LVRR has better clinical and echocardiographic outcomes than no LVRR, although with a suboptimal response compared to the early LVRR population. Ischemic etiology and NYHA functional class <III are predictors of late LVRR.

Cultured human fetal astrocytes can be induced by interferon-gamma to express HLA-DR.

Interferon-gamma (IFN-gamma) modulates the expression of Class II major histocompatibility antigens (MHC), thus providing a potential regulatory mechanism for local immune reactivity in the context of MHC-restricted antigen presentation. Within the central nervous system (CNS), the expression of MHC Class II antigens has been demonstrated on human reactive astrocytes and glioma cells. In order to investigate the modulation of HLA-DR on normal astrocytes, two cell lines were grown from a 20-week-old fetal brain. In situ none of the fetal brain cells expressed HLA-DR as determined by immunohistology on frozen tissue sections. The two cell lines, FB I and FB II, expressed GFAP indicating their astrocytic origin. FB I was HLA-DR negative at the first tissue culture passages, but could be induced to express HLA-DR when treated with 500 U/ml IFN-gamma. FB II was spontaneously HLA-DR positive in the early passages, lost the expression of this antigen after 11 passages and could also be induced to express HLA-DR by IFN-gamma. The induction of HLA-DR expression was demonstrated both by a binding RIA and by immunoprecipitation using a monoclonal antibody (MAB) directed against a monomorphic determinant of HLA-DR. The HLA-DR alloantigens were determined on FB II cells after IFN-gamma treatment, by immunofluorescence and by cytotoxicity assays, and were shown to be DR4, DR6, Drw52, DRw53 and DQwl. These results show that human fetal astrocytes can be induced to express HLA-DR by IFN-gamma in vitro and support the concept that astrocytes may function as antigen-presenting cells.

Role of cytokines in secondary lymphoid organ development

Summary Secondary lymphoid organs are sites of antigen presentation, clonal expansion of B and lymphocytes, and affinity maturation of B lymphocytes. In the intestine, these immune functions occur mainly in Peyer's patches (PP). PP develop through the interplay of two main cell types, haematopoietic cells and meserichyrnal cells. One particular haematopoietic cell type was identified as the inductive cell type in the formation of both PP and lymph nodes and was therefore designated as lymphoid tissue inducer cell. For a successful PP organogenesis, the crucial molecular components involved in the crosstalk of inducer cells and their mesenchymal target cells are adhesion molecules, lymphotoxin (LT) family members, and cytokines. In particular, the interleukin 7 receptor (IL-7R) expressed on inducer cells is absolutely required. To investigate the contribution of the ligand for the IL-7R. the cytokine IL-7, in the process of PP formation, we analyzed double transgenic (TG) mice. These mice resulted from an interbreeding of an IL-7TG mouse strain where the transgene is under the control of the MHC class II promoter with a second transgenic mouse strain, which overexpresses a transactivator for MHC class II genes. Double TG offsprings revealed higher levels of IL-7 mRNA occuring earlier in embryogenesis. Consequently, double TG mice showed a striking phenotype with a 3- to 5-fold increase in PP numbers compared to single IL-7TG or control littermates. Analysis of embryonic double TG intestines demonstrated that the process of PP development was already elevated during development as early as the embryonic day 16.5. Importantly, inducer cells were significantly increased in numbers in these embryonic intestines. Furthermore, the expression of LT? mRNA, which at this early time point is exclusively expressed by inducer cells, was also increased in double TG animals. These data clearly indicate a direct influence of IL-7 on the expansion of lymphoid tissue inducer cells and on the availability of LT? leading to a higher frequency of developing PP in fetal life. Interestingly, in addition to an enhanced frequency of PP development, in double TG mice, three additional phenotypic differences were observed. i) Lymphocyte infiltration in various non-lymphoid organs, such as stomach, salivary gland, and liver. Subsequent analysis demonstrated that B lymphocytes were predominant within these tertiary lymphoid structures. ii) Ectopic lymph node-like structures containing both B and T lymphocytes were found near the inguinal lymph node. iii) Double TG mice had a severe bone resorption syndrome most likely as a consequence of the pro-osteoclastic effect of IL-7. Taken together, these results show that IL-7 plays a key role in the homeostasis of inducer cells, in the generation of PP in the gut, in the formation of ectopic lymphoid tissue, and in bone resorption. Résumé Les organes lymphoïdes secondaires sont les lieux de présentation des antigènes aux lymphocytes, permettant l'expansion des lymphocytes B et T et la maturation d'affinité des lymphocytes B. Dans l'intestin, ces fonctions immunitaires se déroulent dans les plaques de Peyer (PP). Ces plaques se développent grâce à l'interaction des cellules hématopoïétiques avec des cellules mésenchymales. Un type particulier de cellules hématopoïétiques a été identifié comme cellule inductrice dans la formation des PP et des ganglions lymphatiques et de ce fait a été désigné cellule inductrice des tissus lymphoïdes. Durant l'organogénèse des PP, les composants moléculaires cruciaux impliqués dans l'interaction des cellules inductrices et des cellules mésenchymales sont les molécules d'adhésion, les membres de la famille des lymphotoxines (LT) et les cytokines. En particulier, le récepteur de l'interleukine 7 (IL-7R) exprimé par les cellules inductrices est absolument nécessaire. Pour étudier le rôle du ligand de l'IL-7R, l'interleukine IL-7, dans la formation des PP, nous avons croisé une lignée de souris transgénique (TG) surexprimant IL-7 sous contrôle du promoteur MHC class Il avec une lignée de souris transgénique surexprimant un transactivateur des genes MHC class II. Les souris doubles TG présentent une concentration élevée d'ARNm de l'IL-7 durant l'embryogénèse, ce qui résulte en une augmentation du nombre de PP de 3 à 5 fois en comparaison aux souris ayant seul le transgène IL-7 et aux souris contrôles. L'analyse des intestins des souris doubles TG démontre que le processus de développement des PP était élevé dès le jour 16.5 du développement embryonnaire. L'augmentation du nombre des cellules inductrices dans ces intestins embryonnaires est signilicative. De plus l'expression de l'ARNm LT?, qui à ce stade précoce est exclusivement exprimé dans les cellules inductrices, est également augmenté dans les doubles TG. Ces résultats indiquent clairement une influence directe d'IL-7 sur l'expansion des cellules inductrices des tissues lymphoïdes et sur la synthèse de LT? induisant une augmentation des PP se développant durant la vie foetale. En plus du développement accru des PP dans les souris doubles TG, trois différences phénotypiques ont été observées. i) L'infiltration lymphocytaire dans différents organes non-lymphoïdes, comme l'estomac, les glandes salivaires et le foie. Des analyses complémentaires ont demontré que les lymphocytes B étaient prédominants dans ces structures lymphoïdes tertiaires. ii) Des structures de ganglions lymphatiques ectopiques contenant des lymphocytes B et T ont été trouvées près des ganglions lymphatiques inguinaux. iii) Les souris doubles TG présentent un syndrome de résorption osseuse sévère probablement dû à l'effet pro-osteoclaste d'IL-7. Globalement, ces résultats montrent que IL-7 joue un rôle clé dans l'homéostasie des cellules inductrices dans la génèse de PP de l'intestin, dans la formation des tissus lymphoïdes ectopiques et dans la résorption osseuse.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.