The versatility and utilization of phosphorus based compounds in classic carbon-carbon bond forming and esterification reactions

The phosphonium salt room temperature ionic liquid tetradecyltrihexylphosphonium chloride (THPC) has been employed as an efficient reusable media for the palladium catalyzed Suzuki cross-coupling reaction of aryl halides, including aryl chlorides, under mild conditions. The cross-coupling reactions were found to proceed in THPC containing small amounts ofwater and toluene (single phase) using potassium phosphate and 1% Pd2(dba)3'CHCI3. Variously substituted iodobenzenes, including electron rich derivatives, reacted efficiently in THPC with a variety of arylboronic acids and were all complete within 1 hour at 50°C. The corresponding aryl bromides also reacted under these conditions with the addition of a catalytic amount of triphenylphosphine that allowed for complete conversion and high isolated yields. The reactions involving aryl chlorides were considerably slower, although the addition of triphenylphosphine and heating at 70°C allowed high conversion of electron deficient derivatives. Addition of water and hexane to the reaction products results in a triphasic system, from which the catalyst was then recycled by removing the top (hexanes) and bottom (aqueous) layers and adding the reagents to the ionic liquid which was heated again at 50°C; resulting in complete turnover of iodobenzene. Repetition of this procedure gave the biphenyl product in 82-97% yield (repeated five times) for both the initial and recycled reaction sequences. IL ESTERIFICATIONREACTION A new class oftrialkylphosphorane has been prepared through reaction of a trialkylphosphine with 2-chlorodimethylmalonate in the presence oftriethylamine. These new reagents promote the condensation reaction of carboxylic acids with alcohols to provide esters along with trialkylphosphine oxide and dimethylmalonate. The condensation reaction of chiral secondary alcohols can be controlled to give either high levels of inversion or retention through a subtle interplay involving basicity of the reaction media, solvent, and tuning the electronic and steric nature of the carboxylic acid and stenc nature of the phosphorane employed. A coherent mechanism is postulated to explain these observations involving reaction via an initial acyloxyphosphonium ion.

Mass spectrometric studies on aryltin compounds and alkali halides /

The fragmentation behavior of aryltin compounds [(p-ThAnis)nSnPh4.n (n=l-4); (p-ThAnis)3SnX (X=C1, Br, I); (o-CH30C6H4)3SnCl; Ph3Sn(o-pyr)] have been studied comparatively under EI and FAB ionization modes. Alkali halides were run under FAB mode. For the aryltin compounds, the effect of ligand type on the spectra have been explored in both EI and FAB modes. The fragmentation mechanisms have been examined with linked scans, such as fragment ion scans (B/E) and parent ion scans (B^/E). Ab Initio molecular orbital calculations were used to determine the structures of the fragments by comparing their relative stabilities. In the EI MS studies, negative ion EI mode has also been used for some of the aryltin compounds, to examine the possible ion molecule reactions under low pressures at 70eV. In the positive ion FAB MS studies, matrix optimization experiments have been carried out. Negative ion FAB experiments of all the compounds have been done in two different ways. Finally, the comparison of the two methods, EI MS and FAB MS, have been made.For alkali halides, the studies focused on the FAB MS behavior under different conditions. The intensities of cluster ions were reported, and the anomalies in the intensity distribution was also discussed.

ESI-MS[n] of anticancer pt[iv] organoamido complexes and their interactions with DNA-model compounds /

The general solution behaviour and" the major fragmentation pathways of the anticanceractive PtIV coordination complexes, trans, trans, cis, cis-[PtCIOH{N(pFC6F4) CH2h(pY)2] (1), trans, cis, cis-[Pt(OH)2{N(p-FC6F4)CH2h(Py)2] (2), trans, cis, cis-[Pt(OH)2{N(p-HC6F4)CH2h(Py)2] (3), trans, trans, cis, cis-[PtCIOH{N(pHC6F4) CH2h(Py)2] (4), and trans, trans, cis, cis-[PtOH(OCH3){N(p-HC6F4)CH2h(PY)2] (5) (Py = pyridine) have been deduced by positive-ion tandem-in-time ESI-MS. Overall, the acquired full-scan, positive-ion ESI-MS spectra of 2, 3, and 5 were characterized by the presence of relatively low-intensity [M+Nar and [M+Kt mass spectral peaks, whereas those of 1 and 4 were dominated by extremely intense [M+Hr peaks. Complexes 2 and 3 were also noted to form [2M+Ht and [2M+Nat dilneric cations. The source of Na + and K+ ions is believed to be the sample, the solvent systems used or the transport line carrying the sample solutions into the ES ion source. Further, the fragmentation pathway of all complexes studied was found to be almost identical with concurrent loss of py and H20 molecules, loss of a {N(p-YC6F4)CH2} (Y = F, H) group and/or concomitant release of the latter group and a py ligand being the most conunon. The photochemical degradation behaviour of 1 and 2 was also investigated using either fluorescent or ultraviolet light and some products of that degradation were positively identified. Altogether, light irradiation of solutions of both complexes resulted in cation cationisation, reductive-elimination, ligand-release, ligand-exchange and ligand-addition reactions. Finally, positive- and negative-ion ESI-MSn spectra of 5' -GMP, guanosine, inosine and products of their reactions with 1, 2,3, and 4 were also recorded. On the whole, full-scan ESI-MS spectra of the pure nucleobases revealed the presence of cationic and anionic species that are highly reflective of both their solution ionic composition and their propensity t9 form polymeric clusters. Analyses of mass spectra acquired from their reaction solutions with the aforementioned platinum complexes indicated very slow kinetics. However, all complexes investigated formed, to various degrees, Pt-nucleobase adducts with guanosine and inosine, but not with 5'-GMP. The products included species having coordination numbers of III, IV, V, and VI, among which the first-time· observed, coordinatively saturated, jive-coordinate PtlI-nucleobase complexes were of most interest. The latter complexes are presumably stabilized by 7tback- donation involving the filled d orbitals of the PtII centre and the empty pz· orbital of MeCN. All products, whose peaks appeared inlull-scan ESI-MS spectra, are believed to represent solution species rather than artifacts of gas-phase processes. Finally, negativeion ESI-MSn spectra recorded in reaction solutions of 1 and 4 with guanosine and of the latter complex with inosine revealed the negative-ion-ESI-MS first-time observed, noncovalent, nucleoside-chloride adducts, with the source of chloride anion being complexes 1 and 4 theillselves. In contrast, no such adducts were observed to form with Na25'-GMP or its protonated fonn. Few suggestions are offered for the possible cause(s) behind the absence of such adduct ions.

Modifications to the Suzuki reaction and mechanistic insights on the NBS mediated cleavage of benzylidene acetals /

One of the most challenging tasks for a synthetic organic chemist today, is the development of chemo, regio, and stereoselective methodologies toward the total synthesis of macromolecules. r . The objective of my thesis was to develop methodologies towards this end. The first part of my project was to develop highly functionalized chirons from D-glucose, a cheap, chiral starting material, to be utilized in this capacity. The second part of the project dealt with modifying the carbon-carbon bond forming Suzuki reaction, which is utilized quite often as a means of combining molecular sub units in total synthesis applications. As previously stated the first area of the project was to develop high value chirons from D-glucose, but the mechanism of their formation was also investigated. The free radical initiated oxidative fragmentation of benzylidene acetals was investigated through the use of several test-case substrates in order to unravel the possible mechanistic pathways. This was performed by reacting the different acetals with N-bromosuccinimide and benzoyl peroxide in chlorobenzene at 70^C in all cases. Of the three mechanistic pathways discussed in the literature, it was determined, from the various reaction products obtained, that the fragmentation of the initial benzylic radical does not occur spontaneously but rather, oxidation proceeds to give the benzyl bromide, which then fragments via a polar pathway. It was also discovered that the regioselectivity of the fragmentation step could be altered through incorporation of an allylic system into the benzylidene acetal. This allows for the acquisition of a new set of densely functionalized. chiral, valuable synthetic intermediates in only a few steps and in high yields from a-Dglucose. The second part of the project was the utilization of the phosphonium salt room temperature ionic liquid tetradecyltrihexylphosphonium chloride (THPC) as an efficient reusable medium for the palladium catalyzed Suzuki cross-coupling reaction of aryl halides, including aryl chlorides, under mild conditions. The cross-coupling reactions were found to proceed in THPC containing small amounts of water and toluene using potassium phosphate and 1% Pd2(dba)3. Variously substituted iodobenzenes, including electron rich derivatives, reacted efficiently in THPC with a variety of arylboronic acids and afforded complete conversion within 1 hour at 50 ^C. The corresponding aryl bromides also reacted under these conditions with the addition of a catalytic amount of triphenylphosphine that allowed for complete conversion and high isolated yields. The reactions involving aryl chlorides were considerably slower, although the addition of triphenylphosphine and heating at 70 ^C allowed high conversion of electron deficient derivatives. Addition of water and hexane to the reaction products results in a triphasic system in which the top hexane phase contained the biaryl products, the palladium catalyst remained fully dissolved in the central THPC layer, while the inorganic salts were extracted into the lower aqueous phase. The catalyst was then recycled by removing the top and bottom layers and adding the reagents to the ionic liquid which was heated again at 50 ^C; resulting in complete turnover of iodobenzene. Repetition of this procedure gave the biphenyl product in 82-97% yield (repeated five times) for both the initial and recycled reaction sequences.

Reactions of steroidal epoxides with strong organic bases and an investigation into the syntheses of some labelled pregnane derivatives

Reactions of 5,6- and 4,5-epoxycholestane derivatives with strong bases were investigated. Epoxidation of 3a-acetoxycholest-5-ene also gave a new compound along with the anticipated epoxides. Interconversions of the latter were observed. Some possible mechanisms of its formation and rearrangements have been pIioposed. No reaction was observed with any of the 5,6- and 4,5-steroidal epoxides employed in the present study, using potassium tertiary butoxide under refluxing conditions. n-Butyllithium reacted only with 5,6-epoxycholestanes bearing a ketal moiety at the C3 carbon. Opening of the ketal group was observed with n-butyllithium in the case of a ~-epoxide. The reaction was also investigated in the absence of epoxide functionality. A possible mechanism for the opening of ketal group has been proposed. Lithium diethylamide (LDEA) was found effective in rearranging 5,6- and 4,5-epoxides to their ~orresponding allylic alcohols. These rearrangements presumably proceed via syn-eliminations, however the possibility of a corresponding anti-elimination has not been eliminated. A substituent effect of various functional groups (R = H, OH, OCH2CH20) at C3 has-been observed on product distribution in the LDEApromoted rearrangements of the corresponding epoxides. No reaction of these epoxides was observed with lithium diisopropylamide (LDA) • In the second part of the project, several attempts were made towards the sYRthesis of deoxycorticoste~one~17,2l,2l~d3' a compound desirable for the 2l-dehydroxylation studies of deoxycorticosterone. Several routes were investigated, and some deuterium labelled pregnane derivatives were prepared in this regard. Microbial 21-hydroxylation of progesteronel7,21,21,2l- d4 by ~ niger led to loss of deuterium from C21 of the product. An effort was made to hydroxylate progesterone microbially under neutral condtions.

Reactions of various aromatic nitro-compounds and anthraquinones with selected bases and nucleophiles

The Introducti on deals mainly with hi storical studies on aryne chemi stry and ring closure via arynes , hydride replacement from aromatic rings by nucleophi les, c l eavage of anthr aquinones in basic medium and the Leuckart reaction . This work can be divided into two main s ect i ons. Section I is concerned with the investigation of t he reaction of some aromatic ni t ro-compounds with potassamide in l iquid ammonia. 3-Amino-4- nitrobenzophenone was obtained from the reacti on of 4-nitrobenzophenone with t his reagent, toge t her with benzoic acid formed in a competing Haller-Bauer reaction. Nitrobenzene under these conditions gave a complex mixture from which 2-phenylphenol was isolated; a reaction i nvolving benzyne may be i nvo l ved. 4-Nitrodiphenyl sulfone gave 4-aminodiphenyl sulfone and 4-nitroani l ine. 4-Ethoxydiphenyl sulfone and 4-ethoxynitrobenzene were isolated when ethanol was used as a co-solvent in the reaction. Oxidative coupling reactions were observed with nitrotoluenes. 4-Nitrotoluene gave 4,4t-dinitrobibenzyl which i n a pro longed reaction gave 4,4t-dinitros t ilbene . 2-Nitrotoluene gave 2 , 2 t-dinitrobibenzyl, but not the corresponding stilbene derivative even after a longer time . A rather i nteresting result was obtained with 1-nitro-2,4,6- trimethylbenzene which gave a stilbene derivative only. Also the corresponding stilbene was obtained from bis-(4-nitrophenyl)-methane in a rather slow r eaction with this reagent . Section II deals wi th (i) the preparation of 5-chloro- 1-N-methyl aminoanthraquinone and a new synthesis of N-methyl acridones and (ii) treatment of chloro-anthraquinones with fo rmamide and a new synthesis of chloro-anthracenes . 5-Chloro-1 -N-methylaminoanthraqui none was synthesised f rom 1,5-dichloroanthraquinone by treatment with N-methylformamide. Treatment of 5-chloro-1-N-methylaminoanthraquinone with potassamide in liquid ammonia or with potassium t-butoxide i n t-butylbenzene gave N-methylacridone-1-carboxylic acid. This pleasing result, t he outcome of r i ng opening and alter native ring closure, is being extended to related ring systems.

Gas chromatographic electron capture negative ionization mass spectrometric (GC/ECNI/MS) determination of unique fluorinated compounds in the sediments of Lake Ontario and the effect of high-boiling alcohols (as injection solvents) on chromatographic behaviour of polycyclic aromatic hydrocarbons in gas chromatography

Part I - Fluorinated Compounds A method has been developed for the extraction, concentration, and determination of two unique fluorinated compounds from the sediments of Lake Ontario. These compounds originated from a common industrial landfill, and have been carried to Lake Ontario by the Niagara River. Sediment samples from the Mississauga basin of Lake Ontario have been evaluated for these compounds and a depositional trend was established. The sediments were extracted by accelerated solvent extraction (ASE) and then underwent clean-up, fractionation, solvent exchange, and were concentrated by reduction under nitrogen gas. The concentrated extracts were analyzed by gas chromatography - electron capture negative ionization - mass spectrometry. The depositional profile determined here is reflective of the operation of the landfill and shows that these compounds are still found at concentrations well above background levels. These increased levels have been attributed to physical disturbances of previously deposited contaminated sediments, and probable continued leaching from the dumpsite. Part II - Polycyclic Aromatic Hydrocarbons Gas chromatography/mass spectrometry is the most common method for the determination of polycyclic aromatic hydrocarbons (PAHs) from various matrices. Mass discrimination of high-boiling compounds in gas chromatographic methods is well known. The use of high-boiling injection solvents shows substantial increase in the response of late-eluting peaks. These solvents have an increased efficiently in the transfer of solutes from the injector to the analytical column. The effect of I-butanol, I-pentanol, cyclopentanol, I-hexanol, toluene and n-octane, as injection solvents, was studied. Higher-boiling solvents yield increased response for all PAHs. I -Hexanol is the best solvent, in terms of P AH response, but in this solvent P AHs were more susceptible to chromatographic problems such as peak splitting and tailing. Toluene was found to be the most forgiving solvent in terms of peak symmetry and response. It offered the smallest discrepancies in response, and symmetry over a wide range of initial column temperatures.

Elucidation of odour-potent compounds and sensory profiles of Vidal blanc and Riesling icewines from the Niagara Peninsula : effect of harvest date and crop level

I t was hypothesized that the freeze/thaw cycles endured by icewine grapes would change their chemical composition, resulting in unique chemical fingerprint and sensory properties, and would be affected by harvest date (HD) and crop level (CL). The objectives were: 1) to identify odour-active compounds using gas chromatographic and sensory analysis; 2) to determine the effect of CL and HD on these compounds; 3) to determine the icewine sensory profiles; 4) to correlate analytical and sensory results for an overall icewine profile. CharmAnalysis™ determined the Top 15 odour-potent compounds in Vidal and Riesling icewine and table wines; 24 and 23 compounds, respectively. The majority of the compounds had the highest concentrations in the icewines compared to table wines. These compounds were used as the foundation for assessing differences in icewine chemical profiles from different HD and CL. Vidal and Riesling icewine were made from grapes picked at different HD; HI : 19 December; H2: 29 December; H3: 18 January; H4: 11 February (Vidal only). HI wines differed from H3 and H4 wines in both Vidal and Riesling for aroma compounds and sensory profiles. - Three·CL [control (fully cropped), cluster thin at fruit set to one basal cluster/shoot (TFS), and cluster thin at veraison to one basal cluster/shoot (TV)] were evaluated for Riesling and Vidal cultivars over two seasons. Vidal icewines had the highest concentration of aroma compounds in the control and TV icewines in 2003 and in TFS icewines in 2004. In Riesling, most aroma compounds had the highest concentration in the TV icewines and the lowest concentration in the TFS wine for both years. The thinned treatments were associated with almost all of the sensory attributes in both cultivars, both years. HD and CL affected the chemical variables, aroma compounds and sensory properties of Vidal and Riesling icewines and freeze/thaw events changed their sensory profile. The most odour-potent compounds were p-damascenone, cis-rose oxide, 1- octen-3-ol, 4-vinylguaiacol, ethyl octanoate, and ethyl hexanoate. The role of Pdamascenone as a marker compound for icewine requires further investigation. This research provides a strong foundation for the understanding the odour-active volatiles and sensory profiles important to icewine.

The nature of compounds: A psychocentric perspective

Although compound words often seem to be words that themselves contain words, this paper argues that this is not the case for the vast majority of lexicalized compounds. Rather, it is claimed that as a result of acts of lexical processing, the constituents of compound words develop into new lexical representations. These representations are bound to specific morphological roles and positions (e.g., head, modifier) within a compound word. The development of these positionally bound compound constituents creates a rich network of lexical knowledge that facilitates compound processing and also creates some of the well-documented patterns in the psycholinguistic and neurolinguistic study of compounding.

Synthesis, characterization, determination of luminescent properties of tetracoordinate organoboron compounds derivatives from organic tridentate ligands, and their potential application in OLEDs.

Tesis (Doctor of Science with orientation in Materials Chemistry) UANL, 2014.

Synthèse diastéréosélective et énantiosélective de dérivés cyclopropaniques 1,2,3-substitués à l’aide de carbénoïdes gem-dizinciques

Les dérivés cyclopropaniques 1,2,3-substitutés sont des composés intéressants dans de nombreux domaines de la chimie. Au cours de cet ouvrage, nous nous sommes intéressés à la synthèse, tout d’abord diastéréosélective puis énantiosélective de ces composés. Nous nous sommes en particulier intéressés à l’utilisation de la zinciocyclopropanation pour l’obtention de ces dérivés cyclopropaniques 1,2,3-substitutés. Cette méthode consiste en l’utilisation d’un carbénoïde gem-dizincique pour effectuer une réaction de type Simmons-Smith. Cette stratégie a l’avantage d’être diastéréosélective favorisant la formation du zinciocyclopropane dont l’atome de zinc est dans une configuration cis avec le groupement directeur qu’est l’oxygène allylique basique. Lors de cette réaction, l’existence d’une réaction compétitive avec un réactif monozincique diminuait l’utilité de la zinciocyclopropanation. L’issue de la réaction s’est avérée dépendre fortement de la nature du carbénoïde utilisé, de la température réactionnelle et de la présence de ZnI2 dans le milieu. L’étude par GCMS de nombreuses conditions pour la formation des différents carbénoïdes a permis d’identifier les paramètres clés conduisant à la zinciocyclopropanation. Ces découvertes ont notamment permis d’étendre la réaction de zinciocyclopropanation aux alcools allyliques portant un seul groupement directeur (ie. non dérivé du 1,4-buténediol). Dans ces conditions, la réaction s’est avérée extrêmement diastéréosélective favorisant la formation du zinciocyclopropane dont l’atome de zinc est dans une configuration cis avec le groupement directeur. Afin de fonctionnaliser les zinciocyclopropanes ainsi obtenus, plusieurs réactions de fonctionnalisation in situ ont été développées. Chacune de ces méthodes a montré une conservation totale de la diastéréosélectivité obtenue lors de la réaction de zinciocyclopropanation. La versatilité de la zinciocyclopropanation a donc été démontrée. Avec une méthode diastéréosélective efficace pour la formation de zinciocyclopropanes à partir d’alcools allyliques ne portant qu’un seul groupement directeur, il est devenu possible d’envisager le développement énantiosélectif de la réaction. L’utilisation d’un dioxaborolane énantiopur a permis la zinciocyclopropanation avec de très bons excès énantiomères de divers alcools allyliques chiraux. La présence sur la même molécule d’un lien C–Zn nucléophile est d’un atome de bore électrophile a conduit à un échange bore-zinc in situ, formant un cyclopropylborinate énantioenrichi. La formation de ce composé bicyclique a permis d’obtenir une diastéréosélectivité parfaite. De nombreux alcools allyliques ont pu ainsi être convertis en cyclopropylborinates. Une réaction de Suzuki subséquente a permis la formation de dérivés cyclopropaniques 1,2,3-trisubstitués avec de très bons excès énantiomères et une excellente diastéréosélectivité. Les cyclopropylborinates obtenus à l’issue de la zinciocyclopropanation énantiosélective se sont avérés être des unités très versatiles puisque de nombreuses méthodes ont pu être développés pour leur fonctionnalisation.

Monohalogénocyclopropanations stéréosélectives à l'aide de carbénoïdes de zinc, couplages croisés de cyclopropylsilanols, cyclisations d'iodures d'alkyle catalysées par le nickel

Les cyclopropanes sont des unités qui sont très importantes en raison de leur présence dans de nombreux produits naturels, dans certaines molécules synthétiques ayant une activité biologique, ainsi que dans plusieurs intermédiaires synthétiques. Les travaux décrits dans cet ouvrage portent sur l’halogénocyclopropanation stéréosélective d’alcools allyliques en présence d’un ligand chiral stœchiométrique de type dioxaborolane et de carbénoïdes de zinc substitués dérivés de composés organozinciques et d’haloformes. Nous avons ainsi développé des conditions pour l’iodo-, la chloro- et la fluorocyclopropanation stéréosélective. Une étude mécanistique portant sur la nature des carbénoïdes alpha-chlorés et alpha-bromés a révélé qu’il y a un échange des halogènes portés par ces carbénoïdes. Lors de la chlorocyclopropanation, le carbénoïde le plus réactif (alpha-chloré) réagit de façon prédominante en vertu du principe de Curtin-Hammet. Les iodocyclopropanes énantioenrichis ont pu être fonctionnalisés via une réaction d’échange lithium-iode suivie du traitement avec des électrophiles, ou via une réaction de transmétallation au zinc suivie d’un couplage de Negishi. Ainsi, toute une gamme de cyclopropanes 1,2,3-substitués énantioenrichis a pu être synthétisée. Dans l’optique de développer de nouvelles méthodologies de fonctionnalisation des cyclopropanes, nous nous sommes par la suite tournés vers le couplage croisé de type Hiyama-Denmark des cyclopropylsilanols. Dans cette voie synthétique, le groupement silanol a deux fonctions : il sert de groupement proximal basique lors de la cyclopropanation de Simmons-Smith et il subit la transmétallation au cours du couplage croisé. Dans l’étape du couplage croisé, la nature des ligands liés à l’atome de silicium s’est avérée cruciale au bon déroulement de la réaction. Ainsi, l’échange de ligands avec le diéthyl éthérate de trifluoroborane générant le cyclopropyltrifluorosilane in situ est requis pour obtenir de bons rendements. Le dernier volet de cet ouvrage porte sur la cyclisation d’iodures d’alkyle par substitution aromatique par voie homolytique catalysée par le nickel. Une série de composés de type tétrahydronaphtalène et thiochromane ont été préparés selon cette méthode. Une étude mécanistique a confirmé la nature radicalaire de cette réaction et suggère fortement l’action catalytique du nickel. De plus, des études de spectrométrie RMN DOSY ont montré une association entre le complexe de nickel et le substrat ainsi que la base employés dans cette réaction.

Synthèse totale de la pactamycine et d’une sélection d’analogues, progrès vers la synthèse totale de la daphniglaucine C et brève étude d’une transposition allylique réductrice

Il y a plus de cinquante ans, la pactamycine a été isolée en tant qu’agent antitumoral potentiel. Il a été réalisé plus tard qu’il s’agissait en fait d’un agent antibactérien capable d’inhiber la synthèse de protéines lors du procédé de traduction. Récemment, il a même été démontré que certains de ses analogues possèdent des propriétés antiprotozoaires prometteuses. La présente thèse détaille la première synthèse totale de la pactamycine, entreprise au sein du groupe Hanessian, ainsi que la préparation d’une sélection d’analogues testés pour leurs propriétés biologiques. En outre, la daphniglaucine C appartient à une vaste famille de composés naturels isolés des feuilles du daphniphyllum au cours des dix dernières années. Bien que relativement peu d’information soit connue par rapport à l’activité biologique de la daphniglaucine C, la synthèse de celle-ci représente certainement un défi intéressant pour un chimiste organicien. Au passage, nos efforts vers la synthèse totale du composé cible auront permis d’explorer l’emploi de plusieurs méthodes en vue de la formation de centres quaternaires. De plus, un réarrangement réductif atypique, catalysé au palladium à partir d’alcools allyliques non-activés, a été étudié et employé afin de générer une sélection de pyrrolidines polysubstituées.

Synthèse stéréosélective de pipéridines et activation électrophile chimiosélective d’amides en présence de dérivés de la pyridine

L’importance des produits naturels dans le développement de nouveaux médicaments est indéniable. Malheureusement, l’isolation et la purification de ces produits de leurs sources naturelles procure normalement de très faibles quantités de molécules biologiquement actives. Ce problème a grandement limité l’accès à des études biologiques approfondies et/ou à une distribution sur une grande échelle du composé actif. Par exemple, la famille des pipéridines contient plusieurs composés bioactifs isolés de sources naturelles en très faible quantité (de l’ordre du milligramme). Pour pallier à ce problème, nous avons développé trois nouvelles approches synthétiques divergentes vers des pipéridines polysubstituées contenant une séquence d’activation/désaromatisation d’un sel de pyridinium chiral et énantioenrichi. La première approche vise la synthèse de pipéridines 2,5-disubstituées par l’utilisation d’une réaction d’arylation intermoléculaire sur des 1,2,3,4-tétrahydropyridines 2-substituées. Nous avons ensuite développé une méthode de synthèse d’indolizidines et de quinolizidines par l’utilisation d’amides secondaires. Cette deuxième approche permet ainsi la synthèse formelle d’alcaloïdes non-naturels à la suite d’une addition/cyclisation diastéréosélective et régiosélective sur un intermédiaire pyridinium commun. Finalement, nous avons développé une nouvelle approche pour la synthèse de pipéridines 2,6-disubstituées par l’utilisation d’une réaction de lithiation dirigée suivie d’un couplage croisé de Negishi ou d’un parachèvement avec un réactif électrophile. Le développement de transformations chimiosélectives et versatiles est un enjeu crucial et actuel pour les chimistes organiciens. Nous avons émis l’hypothèse qu’il serait possible d’appliquer le concept de chimiosélectivité à la fonctionnalisation d’amides, un des groupements le plus souvent rencontrés dans la structure des molécules naturelles. Dans le cadre précis de cette thèse, des transformations chimiosélectives ont été réalisées sur des amides secondaires fonctionnalisés. La méthode repose sur l’activation de la fonction carbonyle par l’anhydride triflique en présence d’une base faible. Dans un premier temps, l’amide ainsi activé a été réduit sélectivement en fonction imine, aldéhyde ou amine en présence d’hydrures peu nucléophiles. Alternativement, un nucléophile carboné a été employé afin de permettre la synthèse de cétones ou des cétimines. D’autre part, en combinant un amide et un dérivé de pyridine, une réaction de cyclisation/déshydratation permet d’obtenir les d’imidazo[1,5-a]pyridines polysubstituées. De plus, nous avons brièvement appliqué ces conditions d’activation au réarrangement interrompu de type Beckmann sur des cétoximes. Une nouvelle voie synthétique pour la synthèse d’iodures d’alcyne a finalement été développée en utilisant une réaction d’homologation/élimination en un seul pot à partir de bromures benzyliques et allyliques commercialement disponibles. La présente méthode se distincte des autres méthodes disponibles dans la littérature par la simplicité des procédures réactionnelles qui ont été optimisées afin d’être applicable sur grande échelle.

Preparation, Characterisation And Microwave Dielectric Properties Of Anbn-1o3n (N=5,6,8) Type Perovskite Compounds

The present study on the preparation , characterization and microwave dielectric properties of AnBn-1O3n (N=5,6,8) type perovskite compounds. The explored ceramics show dielectric constant between 11 and 54,quality factor in the range 2400 to 88900 GHz and Tf in the range -73 to +231ppm/0C.Most of the investigated cation deficient hexagonal perovskites show intermediate dielectric constant with high quality factors. This study gives a general introduction about material, scientific and technological aspects of DRs.Three important ,€r ,Q and Tf, used for the DR characterization are described. The relationship of the above parameters with the fundamental material characteristics is discussed. Different modes are excited when a DR is excited with suitable microwave spectrum of frequencies .A description of analytical determination of frequencies and construction of mode charts used for sample design and mode identification are also discussed. In this study several ceramics are developed for DR purposes, very little attention has been paid to grow the single crystals. It might be due to the fact that the difficulties and time involved in the growth of single crystals, big enough to function as microwave resonators make them expensive .However single crystals of these materials may have very high Q values. It is also possible that a better understanding of the dielectric properties in relation to the structure can be arrived using single crystals. Hence one of the future directions of dielectric resonator research should be to grow good quality single crystals of the above materials.