Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Development of advanced catalytic systems for the selective hydrogenolysis of biomass-derived polyols

195 p.

Multifactorial approach to non-viral gene therapy: development of an efficient system for the retina

Tese de Doutoramento, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016

Poli-líquidos iônicos e complexos solúveis de Eu3+ e Tb3+ : bioimageamento celular seletivo

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Síntese e caracterização de nanocompósitos magnéticos empregando polimerização radicalar em meios homogêneo (blk) e heterogêneo (miniemulsão)

Tese (doutorado)—Universidade de Brasília, Instituto de Química, Curso de Pós-Graduação em Química, 2016.

Síntese e caracterização do líquido iônico tetrafluoroborato de 1-metil-3-(2,6-(S)-dimetiloct-2-eno)-imidazol como eletrólito para produção de hidrogênio via eletrólise da água

Ionic liquids (ILs) are organic compounds liquid at room temperature, good electrical conductors, with the potential to form as a means for electrolyte on electrolysis of water, in which the electrodes would not be subjected to such extreme conditions demanding chemistry [1]. This paper describes the synthesis, characterization and study of the feasibility of ionic liquid ionic liquid 1-methyl-3(2,6-(S)-dimethyloct-2-ene)-imidazole tetrafluoroborate (MDI-BF4) as electrolyte to produce hydrogen through electrolysis of water. The MDI-BF4 synthesized was characterized by thermal methods of analysis (Thermogravimetric Analysis - TG and Differential Scanning Calorimetry - DSC), mid-infrared spectroscopy with Fourier transform by method of attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy of hydrogen (NMR 1H) and cyclic voltammetry (CV). Where thermal methods were used to calculate the yield of the synthesis of MDI-BF4 which was 88.84%, characterized infrared spectroscopy functional groups of the compound and the binding B-F 1053 cm-1; the NMR 1H analyzed and compared with literature data defines the structure of MDI-BF4 and the current density achieved by MDI-BF4 in the voltammogram shows that the LI can conduct electrical current indicating that the MDI-BF4 is a good electrolyte, and that their behavior does not change with the increasing concentration of water

Histopathological and molecular effects of microplastics in Eisenia andrei Bouché

The ocean has been assumed as the main sink of microplastics (MPs), however, soils may also receive MPs from different sources and through different pathways, which may affect the biota and their role in soil functions. To the best of our knowledge, only one study, until now, reported the effects of MPs on the survival and fitness of soil organisms (Lumbricus terrestris). In our study, epigeic earthworms, of the species E. andrei, were exposed to different concentrations of MPs (0, 62.5, 125, 250, 500 and 1000 mg/kg soildw) in an OECD artificial soil and tested for reproduction, survival and growth of adults, following a standard protocol. The size of the polyethylene MPs to which earthworms were exposed ranged between 250 and 1000 μm. No significant effects were recorded on survival, number of juveniles and, in the final weight of adult earthworms after 28d of exposure, to the different concentrations of MPs. Nevertheless, FTIR-ATR of earthworms and histopathological analysis of the gut provided evidences of damages and immune system responses to MPs.

A new look into the archaeological materials from the Museum of Évora, Portugal – the case study of the Zambujeiro Dolmen

This paper presents the results of a multidisciplinary and multi-analytical study of the amber beads, red pigments, lithic arrowheads and selected ceramics from the Museum of Évora’s collection of the Zambujeiro Dolmen. Amber beads were studied by Attenuated Total Reflectance Fourier Transformed Infrared Spectroscopy (ATR-FTIR) and Pyrolysis coupled to Gas Chromatography and Mass Spectrometry (Py-GC/MS) to confirm their chemical nature and provenance. The red pigments, frequently found in funerary Neolithic context of the Iberian Peninsula, were studied with micro-Raman, and Scanning Electron Microscopy coupled to Energy Dispersive X-Ray Spectroscopy (SEM-EDS) to identify their chemical nature and provenance. The lithic arrowheads were analysed by portable X-Ray Fluorescence (p-XRF), micro X-Ray Diffraction (XRD), SEM-EDS, and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). The ceramic materials were studied to infer provenance and production technology by p-XRF, XRD and SEM-EDS; ceramic contents were evaluated by GC/MS. The studies have shown that while some materials travel hundreds or thousands of kilometres to arrive to the Zambujeiro Dolmen, local materials were also used in the items selected by the communities to honour their deceased.

Non-invasive methodology for the identification of plastic pieces in museum environment – a novel approach

The preservation of modern and contemporary art and costume collections in museums requires a complete understanding of their constituent materials which are often synthetic or semi-synthetic polymers. An extraordinary amount of quality information can be gained from instrumental techniques, but some of them have the disadvantage of being destructive. This paper presents a new totally integrated non-invasive methodology, for the identification of polymers and their additives, on plastic artefacts in museums. NMR (nuclear magnetic resonance) and in-situ FTIR-ATR (attenuated total reflection infrared spectroscopy) combination allowed the full characterization of the structure of thesematerials and correct identification of each one. The NMR technique applied to leached surface exudates identified unequivocally a great number of additives, exceeding the Py–GC–MS analysis of micro-fragments in number and efficiency. Additionally, in-situ FTIR-ATR provided exactly the same information of the destructive μ-FTIR about the polymer structure and confirmed the presence of some additives. Eight costume pieces (cosmetic boxes and purses), dating to the beginning of the 20th century and belonging to the Portuguese National Museum of Costume and Fashion, were correctly identified with this new integrated methodology, as beingmade of plastics derived fromcellulose acetate or cellulose nitrate polymers, contradicting the initial information that these pieces were made of Bakelite. The identification of a surprisingly large number of different additives forms an added value of this methodology and opens a perspective of a quick and better characterization of plastic artefacts in museum environments.

Tortoiseshell or Polymer? Spectroscopic Analysis to Redefine a Purported Tortoiseshell Box with Gold Decorations as a Plastic Box with Brass

The study and preservation of museum collections requires complete knowledge and understanding of constituent materials that can be natural, synthetic, or semi-synthetic polymers. In former times, objects were incorporated in museum collections and classified solely by their appearance. New studies, prompted by severe degradation processes or conservation-restoration actions, help shed light on the materiality of objects that can contradict the original information or assumptions. The selected case study presented here is of a box dating from the beginning of the 20th century that belongs to the Portuguese National Ancient Art Museum. Museum curators classified it as a tortoiseshell box decorated with gold applications solely on the basis of visual inspection and the information provided by the donor. This box has visible signs of degradation with white veils, initially assumed to be the result of biological degradation of a proteinaceous matrix. This paper presents the methodological rationale behind this study and proposes a totally non-invasive methodology for the identification of polymeric materials in museum artifacts. The analysis of surface leachates using 1H and 13C nuclear magnetic resonance (NMR) complemented by in situ attenuated total reflection infrared spectroscopy (ATR FT-IR) allowed for full characterization of the object s substratum. The NMR technique unequivocally identified a great number of additives and ATR FT-IR provided information about the polymer structure and while also confirming the presence of additives. The pressure applied during ATR FT-IR spectroscopy did not cause any physical change in the structure of the material at the level of the surface (e.g., color, texture, brightness, etc.). In this study, variable pressure scanning electron microscopy (VP-SEM-EDS) was also used to obtain the elemental composition of the metallic decorations. Additionally, microbiologic and enzymatic assays were performed in order to identify the possible biofilm composition and understand the role of microorganisms in the biodeterioration process. Using these methodologies, the box was correctly identified as being made of cellulose acetate plastic with brass decorations and the white film was identified as being composed mainly of polymer exudates, namely sulphonamides and triphenyl phosphate.

Analytical evaluation of paper degradation

The aim of this work was in first place to define a methodology for the use of Py-GC/MS as a characterization technique for the organic compounds present in paper samples containing foxing stains, paper have a complex structure and mostly consist with cellulose fibers. Additionally, it was intent to characterize paper samples containing foxing stains with a batch of non-destructive analytical techniques. The work intent to deepen our knowledge on foxing stains, its chemical nature and morphological aspects. For characterization of the morphology of paper samples and foxing stains was used photography under different illuminations and optical microscopy. The presence of fibers disruption was observed with scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS), and also the nature of the fillers that is present in different areas. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used for identification of the sizing agents, determination of the chemical composition of additives that were used for production of paper, and comparison between foxing stains and unfoxed areas was allowed. Micro X-ray diffraction was used to evaluate the crystalline fillers in the sample. Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS was used for chemical analysis to identify the organic components and different classes of organic compounds; Resumo: O objetivo deste trabalho foi definir, em primeiro lugar, uma metodologia para o uso de Py-GC / MS como técnica de caracterização dos compostos orgânicos presentes em amostras de papel contendo manchas de foxing, o papel tem uma estrutura complexa e consiste principalmente com fibras de celulose. Além disso, pretendia caracterizar amostras de papel contendo manchas de raposas com técnicas analíticas não destrutivas. Para a caracterização da morfologia das amostras de papel e das manchas de foxing foi usada fotografia sob diferentes iluminações e microscopia óptica. A presença de fibras de ruptura foi observada por microscopia electrónica de varrimento juntamente com espectroscopia dispersiva de energia (EDS-SEM), assim como a natureza dos materiais de enchimento que está presente em diferentes áreas. Espectroscopia de infravermelho com transformada de Fourier em modo de reflexão total atenuada (ATR-FTIR) foi utilizada na identificação dos agentes de colagem, e na determinação da composição química de aditivos usados na produção de papel, e a comparação entre foxing manchas e áreas unfoxed foi deixada. Micro difracção de raios X foi usada para avaliar o enchimentos cristalinos na amostra. Cromatografia pirólise-gasosa / espectrometria de massa (Py-GC / MS) foi utilizada para análise química para identificar os componentes orgânicos e diferentes classes de compostos orgânicos.

Exploring chalcolithic diet and mobility of humans and animals from Perdigões site

Chalcolithic diet at Perdigões (Reguengos de Monsaraz) was investigated using stable carbon and nitrogen isotope analysis of human bone collagen. Strontium isotopes of faunal dental enamel were used to establish the site local range and to distinguish the presence of non-local individuals. ATR-FTIR and EA analysis were used to determine the degree of bone diagenesis and to evaluate the reliability of the stable isotopic composition for paleodietary reconstruction. The individuals from which paleodietary results were obtained had a diet based on C3 terrestrial resources and some animal protein. Data from Perdigões site, was compared with the published data from other Iberian Chalcolithic populations. Site comparison revealed that diet through Iberian Peninsula have mainly maintained terrestrial dietary focus consistent with animal husbandry and farming on C3 plants with occasional intake of freshwater or marine resources. Strontium isotopic composition of enamel revealed that some of the individuals from Perdigões site were non-local; Resumo: A dieta de indivíduos do período Calcolítico dos Perdigões (Reguengos de Monsaraz) foi investigada através de análise de isótopos estáveis de carbono e azoto no colagénio ósseo. Isótopos de estrôncio do esmalte dentário de fauna foram utilizados para estabelecer o sinal local dos Perdigões, permitindo distinguir a presença de alguns indivíduos e fauna não-locais. A avaliação da diagénese óssea foi efectuada através de análises realizadas com analisador elementar e com ATR-FTIR, de forma a validar dos resultados isotópicos obtidos. Os indivíduos para os quais foi possivel obter resultados isotópicos de carbono e azoto apresentam uma dieta baseada em recursos terrestres, plantas C3, e alguma proteína animal. A comparação efectuada com outros sitios arqueológicos da Peninsula Ibérica revelaram que a dieta das populações é sobretudo feita à base de plantas C3, com ingestão de alguma proteina animal e ingestão ocasional de produtos marinhos ou provenientes de água doce.

Maturation curves of sweet sorghum genotypes.

O sorgo sacarino [Sorghum bicolor (L.) Moench] se destaca como cultura complementar à cana-de-açúcar Saccharum spp. na produção de etanol, uma vez que este possui colmos suculentos com presença de açúcares diretamente fermentescíveis. Em decorrência deste fato, existe a necessidade de se analisar as propriedades do sorgo, a fim de atender às demandas da agroindústria. No presente trabalho, buscou-se desenvolver e estudar as curvas de maturação de sete cultivares de sorgo sacarino em dez épocas de colheita. Os resultados mostram que houve diferença significativa para cultivares e épocas de colheita para todos os parâmetros (p≤0,01). Quanto aos teores de açúcares, as cultivares BRS508, XBWS80147 e CMSXS629 apresentaram as maiores médias para as variáveis açúcares redutores totais (ART) e açúcares totais recuperáveis (ATR). Em relação à produção de etanol por tonelada de biomassa, as cultivares BRS 508 e a CMSXS629 apresentaram os melhores resultados.

Produtividade e qualidade de variedades de cana-de-açúcar de terceira soca sob regime hídrico variável.

O presente trabalho teve como objetivo determinar a produtividade agrícola e a qualidade tecnológica do caldo das variedades da cana-de-açúcar, submetidas a diferentes regimes hídricos. O delineamento experimental foi em blocos ao acaso com três repetições em parcelas subdivididas, com três variedades RB855156, RB835486 e RB867515 (parcela), e sete regimes hídricos correspondendo a 0, 7, 17, 36, 46, 75 e 100% da ETc (subparcela). Foram avaliadas as características de produção: comprimento do entrenó (CE), peso do colmo (PC), número de perfilhos por hectare e produtividade; e tecnológicos do caldo: ºBrix do caldo, Pol do caldo (Teor de sacarose), pureza (PZA), AR (teor de açúcares redutores do caldo), ARC (açúcares redutores da cana), fibras, Pol da cana (PCC), açúcares totais recuperáveis (ATR) e o valor da megagrama da cana (VMgC). O máximo de produtividade da cana-de-açúcar foi de 182,31 Mg ha-1 registrado com irrigação equivalente a 69,01% da ETc; A cana-de-açúcar cultivada com irrigação equivalente a 75% da ETc não proporcionou diferença significativa para a qualidade industrial das variedades testadas em relação ao cultivo em sequeiro (0% da ETc). Não houve diferença significativa para os valores do teor de açúcares redutores (AR), açúcares redutores da cana (ARC) e a pureza do caldo (PZA) entre as variedades. ABSTRACT: This work aimed to determine the agricultural productivity and the technological quality of the juice of the sugarcane varieties, which were submitted to different hydrological regimes. The experimental design was made in randomized blocks with three repetitions in subdivided plots, with three varieties: RB855156, RB835486 and RB867515 (plot), and seven hydrological regimes corresponding to 0, 7, 17, 36, 46, 75 and 100% of ETc (subplot). The following production characteristics were evaluated: length of internode (LI), stem weight (SW), number of tillers per hectare and productivity; and technological components of the juice: ºBrix of the juice, Pol of the juice (sucrose levels), purity (PTY), RS (amount of reducing sugars of the juice), RSC (reducing sugars of the sugarcane plant), fibers, Pol of the sugarcane plant (CPP), total retrievable sugars (TRS) and the value of the sugarcane megagram (Mg). The maximum productivity of sugarcane was 182.31 Mg ha-1, which was registered with irrigation equivalent to 69.01% of ETc. The sugarcane cultivated with irrigation equivalent to 75% of ETc did not provide significant difference for the industrial quality of varieties tested in relation to the non-irrigated cultivation (0% of ETc). There was no significant difference for the values of reducing sugars (RS), the reducing sugars of the sugarcane plant (RSC) and the juice purity (PTY) among varieties.