Designing conformational control of human tissue transglutaminase

Understanding the mechanisms of enzymes is crucial for our understanding of their role in biology and for designing methods to perturb or harness their activities for medical treatments, industrial processes, or biological engineering. One aspect of enzymes that makes them difficult to fully understand is that they are in constant motion, and these motions and the conformations adopted throughout these transitions often play a role in their function.

Traditionally, it has been difficult to isolate a protein in a particular conformation to determine what role each form plays in the reaction or biology of that enzyme. A new technology, computational protein design, makes the isolation of various conformations possible, and therefore is an extremely powerful tool in enabling a fuller understanding of the role a protein conformation plays in various biological processes.

One such protein that undergoes large structural shifts during different activities is human type II transglutaminase (TG2). TG2 is an enzyme that exists in two dramatically different conformational states: (1) an open, extended form, which is adopted upon the binding of calcium, and (2) a closed, compact form, which is adopted upon the binding of GTP or GDP. TG2 possess two separate active sites, each with a radically different activity. This open, calcium-bound form of TG2 is believed to act as a transglutaminse, where it catalyzes the formation of an isopeptide bond between the sidechain of a peptide-bound glutamine and a primary amine. The closed, GTP-bound conformation is believed to act as a GTPase. TG2 is also implicated in a variety of biological and pathological processes.

To better understand the effects of TG2’s conformations on its activities and pathological processes, we set out to design variants of TG2 isolated in either the closed or open conformations. We were able to design open-locked and closed-biased TG2 variants, and use these designs to unseat the current understanding of the activities and their concurrent conformations of TG2 and explore each conformation’s role in celiac disease models. This work also enabled us to help explain older confusing results in regards to this enzyme and its activities. The new model for TG2 activity has immense implications for our understanding of its functional capabilities in various environments, and for our ability to understand which conformations need to be inhibited in the design of new drugs for diseases in which TG2’s activities are believed to elicit pathological effects.

Exciplexes in fluorescence quenching of aromatic hydrocarbons by tertiary aliphatic amines

Strong quenching of the fluorescence of aromatic hydrocarbons by tertiary aliphatic amines has been observed in solution at room temperature. Accompanying the fluorescence quenching of aromatic hydrocarbons, an anomalous emission is observed. This new emission is very broad, structureless and red-shifted from the original hydrocarbon fluorescence.

Kinetic studies indicate that this anomalous emission is due to an exciplex formed by an aromatic hydrocarbon molecule in its lowest excited singlet state with an amine molecule. The fluorescence quenching of the aromatic hydrocarbons is due to the depopulation of excited hydrocarbon molecules by the formation of exciplexes, with subsequent de-excitation of exciplexes by either radiative or non-radiative processes.

Analysis of rate constants shows the electron-transfer nature of the exciplex. Through the study of the effects on the frequencies of exciplex emissions of substituents on the hydrocarbons, it is concluded that partial electron transfer from the amine molecule to the aromatic hydrocarbon molecule in its lowest excited singlet state occurs in the formation of exciplex. Solvent effects on the exciplex emission frequencies further demonstrate the polar nature of the exciplex.

A model based on this electron-transfer nature of exciplex is proposed and proves satisfactory in interpreting the exciplex emission phenomenon in the fluorescence quenching of aromatic hydrocarbons by tertiary aliphatic amines.

Catalisadores para hidroisomerização de n-hexadecano

No processo de hidrocraqueamento para a produção de lubrificantes ocorre a formação de uma corrente rica em compostos parafínicos que possuem alto ponto de fluidez, apesar dos mesmos apresentarem excelentes desempenhos em termos de estabilidade térmica e oxidativa. A transformação das n-parafinas obtidas nestas correntes em isoparafinas e compostos naftênicos, os quais possuem menores pontos de fluidez, se faz necessária a fim de enquadrar esta propriedade. Uma das rotas catalíticas mais importantes neste sentido é a hidroisodesparafinação ou HIDW (hydroisodewaxing) que consiste na conversão de n-parafinas nas respectivas isoparafinas, onde são empregados catalisadores bifuncionais zeolíticos com a ocorrência de seletividade de forma. No caso dos catalisadores industriais, se faz necessária a dispersão da fase metálica e da zeólita em uma matriz amorfa para viabilizar sua conformação e melhorar a resistência mecânica do catalisador final. Neste cenário, o objetivo deste trabalho foi preparar e analisar o desempenho de uma série de catalisadores à base de zeólita beta inseridos numa matriz de alumina, variando-se o teor de zeólita e o tipo de precursor de Pt utilizado. Os catalisadores foram avaliados na reação de hidroisomerização de um composto modelo, no caso, n-hexadecano. Os testes realizados para avaliação da atividade e seletividade foram conduzidos em um reator de fluxo contínuo em alta pressão e fase líquida em unidade de laboratório. Os catalisadores foram testados em condições operacionais que proporcionassem uma ampla faixa de conversões do n-C16. Verificou-se que as atividades dos catalisadores foram proporcionais ao teor de zeólita no catalisador, indicando que a função ácida, neste catalisador bifuncional, é a etapa limitante do processo. Quanto à natureza do precursor de Pt, o catalisador preparado com ácido cloroplatínico foi sensivelmente mais ativo que os preparados com o complexo aminplatina. No entanto, para todos os catalisadores, a distribuição de produtos em função da conversão foi similar, independente do teor de zeólita e da natureza do precursor de platina. Foi também determinado o ponto de fluidez de uma série de produtos de reação, obtendo-se valores entre 17,5 C (n-hexadecano) e - 41 C (produto com 98% de conversão). Obteve-se uma boa correlação entre o ponto de fluidez e a composição dos produtos, considerando-se a presença de isômeros mono, di e tri-substituídos e compostos de menor peso molecular que C16

Avaliação citotóxica, mutagênica e genotóxica dos análogos do Megazol

A doença de Chagas é uma doença tropical infecciosa e negligenciada responsável por um grande número de pessoas infectadas e em risco de infecção, principalmente nas regiões pobres da América Latina. No momento, apenas duas drogas, Benzonidazol e Nifurtimox, estão disponíveis para o tratamento da doença de Chagas, mas são ineficazes por apresentarem baixa taxa de cura. O Megazol é um importante representante da classe dos nitroimidazóis e é uma alternativa promissora devido ao seu potencial tripanocida com um perfil superior de ação quando comparado ao tratamento disponível. No entanto, o Megazol não é utilizado clinicamente uma vez que possui atividade mutagênica e carcinogênica relatada. O Instituto de Tecnologia em Fármacos (Farmanguinhos) desenvolveu três análogos do Megazol: PTAL 05-02 (3-amino-5-(1-metil-5-nitro-1H-imidazol-2-il)-1H-1,2,4-triazol), PAMT 09 (2-amino-N-(1-metil-4-nitro-1H-imidazol-5-il)-5-(trifluorometil)-1H-1,2,4-triazol) e PTAL 04-09 (1-(1-metil-4-nitro-1H-imidazol-5-il)-1H-pirazol). O objetivo deste trabalho é apresentar novas moléculas análogas do Megazol com atividade tripanocida, desenvolvidas a partir de estratégias racionais de desenvolvimento de substâncias bioativas ao manter o perfil farmacodinâmico do Megazol enquanto tenta diminuir ou remover o efeito genotóxico. Testes genotóxicos na avaliação segura de novas substâncias bioativas foram utilizados, de acordo com as diretrizes da OECD. O teste da Salmonella/microssoma foi utilizado na avaliação mutagênica e citotóxica, utilizando linhagens de Salmonella enterica sorovar Typhimurium, deficientes e supercompetentes na síntese de enzimas nitroredutase e acetiltransferase. O análogo PAMT 09 não foi mutagênico em nenhuma concentração e linhagem utilizada. Os análogos PTAL 05-02 e PTAL 04-09 foram mutagênicos, na ausência de S9 mix, para a linhagem TA98/1,8-DNP6. Na avaliação de citotoxicidade, os três análogos foram citotóxicos, independente de metabolização exógena S9 mix. O teste do micronúcleo, utilizando células de macrófago de rato, foi realizado para a avaliação genotóxica dos análogos do Megazol. Os três análogos foram capazes de induzir a formação de micronúcleos e apresentaram efeito citotóxico.

High temperature processing of fish sausage 3. - Studies on some of the storage characteristics

The proximate composition of the high temperature processed fish sausage was found to be 14.56% protein, 4.65% fat, 69.14% moisture, 2.12% ash and 8.12% carbohydrate. The quality of the product during storage was assessed on the basis of the changes observed in the physical, chemical and microbiological parameters. The results of the different tests such as pH, volatile base nitrogen (VBN), trimethyl amine nitrogen (TMA-N) and jelly strength are summarized and discussed. The total bacterial load increased gradually during storage but was not proportional to the initial load.

Effects of inlake application of glyphoste and 2, 4‐D to control shoreline water hyacinth on diversity and abundance of associated macrofauna

The purpose of inlake herbicide trials was to assess on the aquatic environment and resources, of in-lake of weeder 64 (2,4-0 amine) and Rodio (Glyphosate) water hyacinth the effects application to control water hyacinth. The experiments reported here specifically studied the effects of the herbicides on the diversity and abundance of aquatic macrofauna associated with the water weed. Results from this and similar experiments which assessed herbicide efficacy on water hyacinth; dissipation in water, impact on water quality, algal biomass and on diversity and abundance of zooplankton and macrofauna were all to be evaluated as input into the environmental impact assessment exercise required to facilitate decisions on the use of herbicides to control water hyacinth in Uganda.

噻吩胺基稀土配合物的合成、表征

本论文共合成了两种类型12个稀土金属配合物和一个硅化合物,分别对它们进行了红外、核磁等表征，对其中的9个配合物进行了晶体结构的测定。考察了配体结构和反应条件对所生成的配合物结构的影响，研究了稀土单烷基配合物的反应性，以及稀土双烷基配合物在烷基铝和有机硼盐的共同作用下对丁二烯聚合的催化活性和选择性。主要工作内容和结论如下： (1) 合成了噻吩苯胺配体(HL1)，该配体与(Lu，Y)稀土三烷基化合物反应，通过C–H活化和烷基消除反应制备了稀土(Lu，Y)单烷基配合物1和2，配体以少见的C，N模式配位，S原子并不参与配位。配体(HL1)与Sc三烷基化合物反应制备了配体分别以C, N和N, S配位的双配的Sc配合物5。 (2) 通过改变反应时间和溶剂体系，HL1与稀土钇三烷基化合物反应可得到罕见的由稀土烷基化物和胺化物两部分组成的配合物3，它们通过噻吩环上活化的C原子连接在一起。HL1和Lu(CH2SiMe3)2(THF)2LiCH2SiMe3在甲苯和正己烷溶剂中反应可得到以L12Lu(CH2SiMe3)2为阴离子，Li(THF)4为阳离子的离子对4。 (3) 研究配合物1和2的反应性。1和2与过量的PhSiH3反应得到中心金属与Si元素交换的Si化合物。 (4) 合成了噻吩苯基膦胺配体(HL2-4)和苯基膦胺配体(HL5)配体。HL2-5与稀土(Y, Lu和Sc)三烷基化合物反应制备了稀土双烷基配合物6，7，8，9，10，11和12。进一步研究了稀土金属双烷基配合物6–12对丁二烯的催化特性，发现该系列催化剂具有独特的催化性质，能够催化丁二烯高反1，4-聚合（91.3%），得到的聚合物分子量在1到2万之间，分子量分布较窄(1.4–1.6)。 (5) 研究了金属钇(Y)，镥(Lu)，钪(Sc)三种中心金属对丁二烯聚合活性和反式1，4选择性的影响，发现催化剂对丁二烯聚合活性和反1，4选择性取决于配合物的中心金属原子，其中选择性最高为钪配合物，催化活性最佳的为钇配合物。 (6) 研究了配体HL2-4的N-芳环上的取代基分别为甲基，乙基，异丙基时催化体系对丁二烯反式1，4聚合活性和选择性的影响，发现随着N-芳环上取代基空间位阻的增大，催化剂活性逐渐下降，选择性逐渐增加，但当其取代基为异丙基时，过大的空间位阻导致活性和选择性同时有明显的下降。我们通过改变噻吩基为苯基，比较了相同聚合条件下含噻吩基的稀土双烷基配合物和含苯基的稀土双烷基配合物对丁二烯聚合活性和选择性的影响，发现噻吩环的存在对催化剂的活性和选择性有较大的影响。 (7) 在相同催化剂条件下，研究了不同聚合条件(不同类型的AlR3，不同类型的Borate，Al/Ln比等)对丁二烯反1，4聚合活性和选择性的影响。 我们发现，在AlR3和Borate这两种影响因素中，以烷基铝的类型对催化剂催化活性和选择性的影响最大，而有机硼盐的影响则比较轻微，其中以烷基铝为AliBu3，Borate为[B(C6F5)4][Me2NHPh]时，反1，4选择性为最佳。Al/Ln增大并不能够显著增加催化剂的活性，对选择性的影响也并不明显，相反，随着铝比的增加，聚合过程中的链转移增加，导致分子量下降，对于该系列稀土烷基催化剂，最佳Ln/Al 为10。

含空穴传输基团PPV的合成与性能研究

该论文以提高聚苯撑乙烯（PPV）类发光聚合物的空穴传输性能为主要目的,通过将具有较高空穴传输能力的芳胺类小分子基元引入发光聚合物分子链,设计并合成了一系列含芳胺基元的PPV聚合物.另外,还通过对分子结构进行设计和控制,获得了红绿蓝三基色发光.最后还利用在共轭分子主链上引入具有三维空间位阻的侧链基团,获得了高效率的绿色发光聚合物材料.

IMPROVEMENT OF STRUCTURAL INSTABILITY OF THE ION-SENSITIVE FIELD-EFFECT TRANSISTOR (ISFET)

Three causes involved in the instability of the ISFET are proposed in this study. First, it is ascertained that hydroxyl group resident at the surface of the Si3N4 film or in the electrolyte solution is most active and subject to gain or loss of electrons. This is one of the main causes for ISFET structural instability. Secondly, the stability of the pH-sensitive FET varies with deposition conditions in the fabrication process of the ISFET. This proves to be another cause of ISFET instability. Thirdly, the pH of the measured solution varies with the measuring process and time, contributing to the instability, but is not a cause of the instability of the pH-ISFET itself. We utilized the technique of readjusting and controlling the ratio of hydroxyl groups to amine groups to enhance the stability of the ISFET. Our techniques to improve stability characteristics proved to be effective in practice.

苯乙酮、氨甲酸酯参与的直接Mannich反应

Mannich反应是有机化学中最重要的碳-碳键形成反应，其产物是合成手性胺的通用中间体。间接Mannich反应使用不稳定的预制烯醇等当体，以未修饰的酮为给体的直接方法将增强Mannich反应的效率。针对低活性苯乙酮、氨甲酸酯参与的直接Mannich反应，研究工作将更具挑战性。 在前期实验中，我们发现Lewis酸-NbCl5可高效催化苯乙酮、芳香醛、芳香胺三组分直接Mannich反应，反应在环境温度下进行，高收率获得Mannich碱。这是以苯乙酮参与的Mannich反应中，实现催化量Lewis酸催化的首次报道。该方法高效且操作简单。但就底物而言，对易去保护、低活性的氨甲酸酯类底物收率较低。我们设想Brønst酸可解决此类底物问题。令人高兴的是，杂多酸可高效催化芳香酮、芳香醛、氨甲酸酯三组分直接Mannich反应，反应在环境温度下进行，高收率获得N-保护的β-氨基酮。该方法底物范围广泛，普适性强且催化剂便宜。 基于杂多酸在苯乙酮、氨甲酸酯为底物直接Mannich反应中的高效性，我们设想杂多酸与功能化的手性有机小分子-手性伯胺组装可解决催化剂回收问题，同时实现不对称催化。实验结果表明，非共价键固载手性伯胺不能有效催化苯乙酮为底物的直接Mannich反应，无论是对映选择性还是收率均较低。随后，我们以丙二酸酯及α-氨基砜为底物，以增强底物活性，同时绕开亚胺的不稳定性。辛可宁伯胺以氢键双活化底物，有效催化原位产生氨甲酸酯类亚胺与丙二酸酯的Mannich反应，高收率获得Mannich碱，ee值中等。 我们采用逐步解决问题的策略解决Mannich反应中的部分问题并在Lewis酸催化、Brønst酸催化、非共价键固载手性伯胺催化及手性伯胺氢键催化的直接Mannich反应中做出了有益探索。 The Mannich reactions are among the most fundamental carbon-carbon bond forming reactions in organic chemistry, and the reaction products are versatile intermediates in the synthesis of chiral amines. The indirect Mannich reaction uses preformed enolate equivalents. However the preformed enolates are unstable. Thus, a direct methodology based on unmodified ketone donors would enhance the efficiency of the Mannich reaction. Especially researches for the directed Mannich reactions of acetophenone, carbamate, which own lower activities, will be more challengeable. In the initial experiments, we found an efficient Lewis acid-NbCl5 which could catalyze three-component Mannich-type reaction of acetophenone, aromatic aldehydes and aromatic amines at ambient temperature in high yields. This is the first report that use catalytic amount of Lewis acid in the Mannich reactions of .acetophenone. The method reported is not only simple to operate but also efficient. However, as far as amines are concerned, the substrates of carbamates which can be deprotected more easily and less reactive than amines give low yields. We envisaged that Brønsted acid would resolve this problem. Pleasingly, heteropoly acids (HPA) efficiently catalyzed one-pot three-component Mannich reactions of aryl aldehydes, aryl ketones, and carbamates at ambient temperature and afforded the corresponding N-protected β-amino ketones in good to excellent yields. This method provides a novel and improved modification of three-component Mannich reactions in terms of a wide scope of aldehydes, ketones and carbamates, economic viability. Based on the high efficiency of heteropoly acids in the Mannich reaction of acetophenone and carbamates, we envisaged that if HPA were combined with functionalized chiral organocatalysts–chiral primary amines the assemblies may be able to act as recoverable asymmetric organocatalysts. The results of exprimentals showed that noncovalently supported heterogeneous chiral primary amine couldn’t effectively catalyze the Mannich reactions which own two the substrate of acetophenone regardless of enantioselectivity and yield. Then, we employed malonates and α-amido sulfones as substrates to enhance reactivity of substrates and circumvent the instability of imines. A moderately enantioselective and highly yield Mannich reaction with in situ generation of carbamate-protected imines from stable α-amido sulfones catalyzed by cinchonine primary amine catalyst was developed. It is noteworthy that cinchonine primary amine can dual activate substrates through H-bond activation and thus promote the reaction. We applied step-by-step-strategy to resolve some problems in the Mannich reactions and did some instructive explorations in Lewis acid catalysis, Brønst acid catalysis, noncovalently supported heterogeneous chiral primary amine catalysis and chiral primary amine as hydrogen-bond catalysis.

硫手性有机小分子催化剂的设计、合成及其在不对称亚胺氢转移还原中的应用

过去十多年，世界手性药物市场需求迅速增长，手性制药工业的发展壮大，已经引起了各国政府、学术界，特别是企业界的高度重视。手性药物中含有大量的手性胺单元，因此研究高效构建手性胺结构单元的方法具有重要的意义和实用价值，而亚胺的不对称还原是合成手性胺最便捷的方法。 手性有机小分子路易斯碱催化三氯氢硅不对称还原亚胺是最近几年才发展起来的一类新的亚胺不对称还原方法。尽管在对映选择性和底物适用范围等方面已经获得了突破性的进展，但是，高性能的路易斯碱催化剂仅局限于N-甲酰氨基酸酰胺一种类型，而且其底物适用范围和催化活性仍不够理想。因此，发展新型催化剂很有必要。 手性硫氧化物作为手性诱导剂的应用已经有数十年的时间，广泛应用在不对称合成及天然产物的全合成中。理论上，硫氧结构单元也可以作为路易斯碱，对硅烷类试剂进行活化，而且硫氧键还有碳氧键难以比拟的先天优势，硫原子自带手性特征，在反应过程中，手性中心离反应位点更近，因此，从手性硫氧化合物出发，极有可能开发出新的高效手性路易斯碱催化剂。最近，Kobayashi和Khiar在亚胺的不对称烯丙基化反应中用手性亚砜活化烯丙基三氯硅烷，获得了较好的ee值，但反应中手性亚砜的用量都需要化学计量以上，因此还不能算做真正意义上的催化剂，进一步的文献调研也未见真正意义上的硫手性有机小分子催化剂。 本文首次成功将硫手性亚磺酰胺衍生物应用于催化三氯氢硅对亚胺的不对称还原，在经过对亚磺酰胺衍生物的多次结构优化，开发出了合成容易，催化活性和立体选择性都很优良，并且有着前所未有的底物普适性的新型手性路易斯碱催化剂。 我们首先尝试将商品化的20mol%叔丁基亚磺酰胺和对甲基亚磺酰胺直接用作催化剂催化三氯氢硅对亚胺的不对称还原，尽管仅获得中等的收率和很低的对映选择性，但证明我们的设计思路是可行的。在此基础上，我们以叔丁基亚磺酰胺为原料和基本骨架，设计合成了一系列的亚磺酰胺类催化剂，通过对催化剂的结构改造，发现当催化剂中存在较强酸性的酚羟基时，催化效果得到大幅提高。随着对催化剂的进一步结构优化，我们找到了一个结构简单，催化效果还不错的催化剂，经过反应条件优化以后，催化反应的收率最高能达到98%，对映选择性最高达93%，并且这个催化剂的底物适应范围比之前报道的催化剂都要广泛。针对酚羟基在催化剂中的重要作用，我们进行了仔细的机理研究后发现，在催化反应中，催化剂极有可能是通过双分子机理去活化三氯氢硅从而实现不对称催化的，而酚羟基的作用就是通过分子间氢键促进双分子催化剂与三氯氢硅的络合。受此启发，我们设计了一系列具有双齿结构的催化剂，通过对双齿催化剂的结构优化，最终筛选出了一个结构更加简单，但催化效果更好的双齿催化剂。10mol%该催化剂催化亚胺还原最高获得95%的收率和96%的ee值。这一结果也进一步验证了我们先前对催化剂机理的推测。 随后，我们还尝试将这些催化剂用于二级胺和芳香酮的直接还原胺化反应中，虽然能获得不错的收率，但对映选择性却很差，我们对反应条件进行了仔细的摸索，仍然没有获得突破。但这些实验为进一步研究二级胺和酮的不对称直接还原胺化反应奠定了良好的基础。 In the past decade, the rapid growth of the global chiral drug market and the significant development of the chiral pharmaceutical industry have attracted a great deal of attention from government, academia and enterprises. Chiral amine is an important structural motif of chiral drugs. Therefore, development of methods for the construction of this motif is of great importance. Catalytic enantioselective reduction of imines represents one of the most straightforward and efficient methods for the preparation of chiral amines. The chiral Lewis base organocatalysts promoted asymmetric reduction of imines by HSiCl3 has recently achieved significant advancements. Although big breakthroughs have been made in terms of substrate generality and enantioselectivity, the highly effective catalysts are limited to N-formyl amino acid amides, of which the efficiency and substrate scope remain unsatisfactory. Therefore, development of novel organocatalysts for this transformation is in great demand. Chiral sulfoxides have been well established as efficient and versatile stereocontrollers and have been extensively used in asymmetric synthesis and total synthesis of natural products. The S=O structural motif of sulfoxide could also behave as Lewis base activator for cholorsilane reagents, which, moreover, could be even better than caboxamide considering that the sulfur atom is chiral and thus the chirality center is closer to the reaction center. There exist great potentials that highly effective novel Lewis base organocatalysts could be developed starting from S-chiral sulfoxides. Recently, several S-chiral sulfoxides were reported by Kobayashi and Khiar to be used as Lewis base catalyst to activate allyltrichlorosilanes in asymmetric allylations and good enantioselectivities were obtained. However, these S-chiral sulfoxides were all used at a more than stoichiometric amount and were thus not authentically catalytic. A careful literature survey further revealed that there has been so far no S-chiral organocatalyst available. In this study, we, for the first time, successfully used S-chiral sulfinamides as Lewis base organocatalysts for the asymmetric reduction of ketimines by HSiCl3. After several rounds of structural optimization, we developed the first example of highly effective S-chiral organocatalysts, which promoted the asymmetric reduction of ketimines with trichlorosilane in high yield and excellent enantioselectivity with unprecedented substrate spectrum. In our initial practice, we examined 20mol% of the commercially available (R)-tert-butanesulfinamide and (S)-toluenesulfinamide as the catalyst in the hydrosilylation of ketimine. Although the product was only furnished in moderate yield and low ee, these results demonstrated that our strategy of catalyst design is on the right way. Next, starting from chiral tert-butanesulfinamide, we prepared a series of tert-butanesulfinamide derivatives via simple reductive amination and examined their catalytic efficiencies in the reduction of ketimine. We found that the catalyst bearing a phenolic hydroxyl group exhibited good reactivity and enantioselectivity. On the basis of which, we obtained a structurally simple and highly effective novel organocatalyst, affording the product in 98% yield and 93% ee under optimal reaction conditions. After careful exploration on the role of phenolic hydroxyl group in the catalyst, we speculated that two molecules of the catalyst be involved in the course of reaction, of which the assembly around the silicon center is facilitated by the intermolecular hydrogen bonding through the phenolic hydroxyl groups. Thus, we incorporated two units of sulfonamide into one molecular and prepared a new type of bissulfinamides organocatalysts and examined their catalytic efficiencies in the reduction of ketimine. After optimizing the structure of these catalysts, we finally obtained a novel organocatalyst which has even simpler molecular structure but showed better efficacies, 10mol% of which afforded up to 97% yield and 96% ee under optimal reaction conditions. These results further proved our speculation about the catalytic mechanism. We also examined the newly developed S-chiral organocatalysts in direct asymmetric reductive amination of secondary amines with aromatic ketone. The product was furnished in good yield but in low ee. No better results could be obtained despite our intense opimization efforts. Nevertheless, these experiments laid excellent foundations for eventual success.

吲哚生物碱Desbromoarborescidine A 的全合成及烯胺C-亚磺酰化反应研究

从新几内亚核桃木的树皮中分离得到的吲哚类喹诺里西定生物碱10-Desbromoarborescidine A，因发现其具有阻滞钙离子通道的活性而倍受关注。10-Desbromoarborescidine A由A、B、C、D四个环组成，只有一个手性中心，是吲哚生物碱中结构较简单的一种，常作为此类生物碱全合成方法的模型化合物。但迄今为止，能高效而简便的实现手性10-Desbromoarborescidine A不对称全合成方法线路不多，大多数以不对称诱导的方式建立其手性中心，手性催化的方式仅有一例金属催化。从逆合成分析可知，Desbromoarborescidine A的全合成可以通过亚胺不对称催化还原进行关键的手性中心构建，而本课题组在之前的研究中通过手性有机小分子催化剂的发展，已将三氯硅烷氢转移还原亚胺发展成了一类简便实用、高效、高对映选择性并具有优良底物适应范围的不对称催化反应，我们希望以这一反应作为关键手段，发展一条Desbromoarborescidine A及其类似物不对称合成新路线。 根据我们设计的新路线，首先成功合成了其关键中间体，然后我们进行了关键的不对称催化尝试。用本实验室已有的高性能有机小分子催化剂虽得到了较好的对应选择性，但是产率很低。同时，为了验证整条线路的可行性，我们也用消旋的中间体进行拉通线路的尝试。但不幸的是，在脱除保护基时遇到了很大困难。尝试换不同的保护基，或改变脱保护基的顺序，都未能成功合成目标产物。究其原因可能是由于吲哚的特殊性造成的，吲哚类亚胺与常规的芳香亚胺有较大的差异，其NH基团无论保护还是不保护，对与其2位相联接的C=N双键均有很大的影响，导致其不对称催化还原难以进行。另外，由于所设计的还原产物含有处在吲哚苄位的胺基，稳定性较差，造成保护基脱除困难。 烯胺C-亚磺酰化反应是本课题组最近发现的一个新反应，之前未见文献报道。本研究对该反应进行了反应条件优化和底物扩展，发现带Cbz，Ac，COt-Bu，CO2Et，Bz等保护基的一系列环状和非环状烯胺在亚磺酸钠、DMAc和MeSiCl3的共同作用下能高效高产率生成β-胺基烯基亚砜类新化合物，为合成多官能团化的烯基亚砜新化合物提供了一条简便实用的途径。 The main constituent of Dracontomelum mangiferum B1, indoloquinolizidine alkaloid 10-Desbromoarborescidine A, has drawn great attention due to its calcium channel blocking activity. Its molecular structure is relatively simple compared with the other alkaloids of the same type, which has only one chiral center, albeit with four cycles A, B, C, and D. This compound is often used as a model target for exploring different strategies for the total synthesis of indole alkaloids. Nevertheless, so far there still lack practical and highly efficient methods for the asymmetric total synthesis of 10-Desbromoarborescidine A. Most of the current available methods rely on stoichiometric asymmetric synthesis for the construction of the chiral center. There is only one example reporting utilization of asymmetric catalysis, but with transition metal complex as the catalyst. Our retrosynthetic analysis shows that catalytic asymmetric reduction of imine could be used as the key step for the construction of the chiral center of Desbromoarborescidine A. Since in the previous studies our group has developed the asymmetric reduction of imines by trichlorosilane into a practical and highly efficient and enantioselective method using newly designed chiral organocatalysts, we hope to apply this method to develop a novel synthetic route for the total synthesis of Desbromoarborescidine A and its analogues in this study. According to the newly designed synthetic route, we first accomplished the synthesis of the key intermediates which was then examined for the critical asymmetric catalysis. The asymmetric reduction using the highly efficient organocatalysts, developed in our lab afforded high ee but poor yield. We tried different reaction conditions to improve the yield, but failed to get any good results. Simultaneously, to vertify the feasibility of the synthetic route we designed, we also tired to go through the route toward the racemic synthesis of Desbromoarborescidine A. But unfortunately, protection and deprotection proved to be big hurdles. All the different protection groups and different sequences of protection and deprotection we tried failed to get us through the designed synthetic sequence and furnish the final product. Most likely, the indole part is the culprit behind the failures.The NH group of the indole, no matter protected or not, may impact the catalytic asymmetric reduction of C-N double bond connected with 2-C. Additionally, the reduction product we designed contains an amino group in the β-position of the indole, which may cause problems due to its instability. C-sulfenylation of enamines is a novel reaction discovered recently by our group, which has not been seen before in the literature. In this study, optimization of the reaction conditions and exploration of the substrate scope were further undertaken for this reaction, which reveal that a series of enamines with N-Cbz, Ac, COt-Bu, CO2Et protection groups could all undergo smooth C-sulfinylations with the comined use of sodium benzene sulphinate, DAMc and MeSiCl3, efficiently furnishing the β-amino vinylsulfoxide products in high yield, affording a practical and highly efficient methods for synthesis of functional vinylsulfoxides.

Liquid-liquid extraction of Pa-233(V) with Aliquat 336

The extraction of protactinium with Aliquat 336 (methyl-tri-caprylyl ammonium chloride) in toluene, cyclohexane and chloroform from HCl, HNO3, H2SO4, HClO4, HF and mixed HCl-HF media was investigated by radioactive tracer technique. Distribution ratios of protactinium between the aqueous solution and the organic phase were determined as a function of shaking time, concentrations of acid in aqueous solution phase, extractant concentration and type of diluents in the organic phase. Aliquat 336 can almost quantitatively extract protactinium from strong HCl solution. At the same time, small amounts of HF in HCl solutions have a strong effect on Pa distribution.

Solvent extraction study of protactinium(V) with methyl-iso-butyl carbinol and methyl-iso-butyl ketone

In order to study the extraction pattern of protactinium in different types of extracting agents and compare the similarity of patterns of extraction with dubnium and thereby unraveling its chemistry, solvent extraction of protactinium(V) with methyl-iso-butyl carbinol (MIBC) and methyl-iso-butyl ketone (MIBK) was studied using Pa-233 as a radiotracer. The extraction efficiencies of Pa were determined as a function of shaking time, concentrations of mineral acids, and extractant concentrations using the two extractants. The results show that MIBK is more suitable for the extraction of protactinium than MIBC in benzene. Furthermore, the effect of the F anion is also discussed.