Regenerated cellulose ultrafiltration membranes in the treatment of pulp and paper mill process waters

Ultrafiltration (UF) is widely applied in different separation processes in the pulp and paper industry. The growing need to protect the environment, a lack of pure water and an interest in producing high-value chemicals from compounds present in process waters will probably lead to an increase in the use of UF in the pulp and paper industry. The efficiency and cost-effectiveness of a UF process depends on the applied membrane. The membrane should have a high and stable filtration capacity, a particular selectivity and a long operational lifetime. To meet these requirements a membrane should have a low fouling tendency. In addition, it should withstand the prevailing operational and chemical conditions. This thesis evaluates the performance and applicability of the regenerated cellulose (RC) membranes 00030T and C2 in the treatment of pulp and paper mill process waters based on the requirements above. The results demonstrated that both the tested RC membranes fulfilled well the requirement of high filtration capacity. In addition, in the filtration of a paper mill clear filtrate (CF) the RC membranes were not as greatly affected by variations in the CF quality as a polysulphone membrane. Furthermore, due to their extreme hydrophilicity and weak charge the fouling tendency of the membranes can be expected to be low in pulp and paper mill filtration applications. It is, however, known that fouling cannot be totally avoided even when the membrane is chosen very carefully. This study indicated that carbohydrates influenced negatively on permeability and caused fouling in the filtration of groundwood mill circulation water. Thus, a pre-treatment effectively reducing the amount of carbohydrates might help to maintain a stable capacity. However, the results of the thesis also showed that the removal of some of the possible foulants might just increase the harmful effect of others. Multivariate examination was useful in the understanding of the complicated factors causing the unstable capacity. The thesis also revealed that the 00030T and C2 membranes can be used at high pressure (max. tested pressure 12 bar). The C2 membrane, having a sponge-like substructure, was more pressure resistant, and its performance was more stable at high pressure compared to the UCO30T membrane containing macrovoids in its substructure. Both tested membranes can, according to the results, also be used at temperatures as high as 70°C in acidic, neutral and alkaline conditions. However, the use at extreme conditions might cause faster ageing of the membranes compared to ageing in neutral conditions. The thesis proved that both the tested RC membranes are very suitable for pulp and paper mill applications and that the membranes can be utilised in processes operating in challenging conditions. Thus, they could be used in more demanding applications than supposed earlier.

North African populations carry the signature of admixture with Neandertals

One of the main findings derived from the analysis of the Neandertal genome was the evidence for admixture between Neandertals and non-African modern humans. An alternative scenario is that the ancestral population of non-Africans was closer to Neandertals than to Africans because of ancient population substructure. Thus, the study of North African populations is crucial for testing both hypotheses. We analyzed a total of 780,000 SNPs in 125 individuals representing seven different North African locations and searched for their ancestral/derived state in comparison to different human populations and Neandertals. We found that North African populations have a significant excess of derived alleles shared with Neandertals, when compared to sub-Saharan Africans. This excess is similar to that found in non-African humans, a fact that can be interpreted as a sign of Neandertal admixture. Furthermore, the Neandertal's genetic signal is higher in populations with a local, pre-Neolithic North African ancestry. Therefore, the detected ancient admixture is not due to recent Near Eastern or European migrations. Sub-Saharan populations are the only ones not affected by the admixture event with Neandertals.

Health Migration Policies and Ethical Controversies: the Case of African Nurses in the UK

The United Kingdom (UK) for last few decades has been faced with a growing need for health personnel and has therefore attracted professionals, particularly overseas nurses. The country has been characterised by a historical migration policy favourable to the recruitment of foreign health staff. However, in the context of deep shortage and high level of diseases and health system weakness, the international health professional recruitment from Sub Saharan Africa has created unprecedented ethical controversies which have pushed the UK to the centre of discussions because of its liberal policies towards international recruitment that have been considered as aggressive. While the 'brain drain' controversy is well known, less attention has been devoted to the specific international health migration controversy and the pivotal role of the UK in the diffusion of ethical code of practice. Using mainly the perspective of the policy analysis of controversy (Roe 1994) and the analysis of discourses (de Haas 2008), our paper comes back respectively to the nature of the controversy and the pivotal role of the UK. It also analyses how the implementation of UK ethical policies - Code of Practice, banned countries list of recruitment, restrictive immigration policies - have been considered as inefficient and unethical in their contents and their targets.

Headspace needle-trap analysis of priority volatile organic compounds from aqueous samples: application to the analysis of natural and waste waters

Combining headspace (HS) sampling with a needle-trap device (NTD) to determine priority volatile organic compounds (VOCs) in water samples results in improved sensitivity and efficiency when compared to conventional static HS sampling. A 22 gauge stainless steel, 51-mm needle packed with Tenax TA and Carboxen 1000 particles is used as the NTD. Three different HS-NTD sampling methodologies are evaluated and all give limits of detection for the target VOCs in the ng L−1 range. Active (purge-and-trap) HS-NTD sampling is found to give the best sensitivity but requires exhaustive control of the sampling conditions. The use of the NTD to collect the headspace gas sample results in a combined adsorption/desorption mechanism. The testing of different temperatures for the HS thermostating reveals a greater desorption effect when the sample is allowed to diffuse, whether passively or actively, through the sorbent particles. The limits of detection obtained in the simplest sampling methodology, static HS-NTD (5 mL aqueous sample in 20 mL HS vials, thermostating at 50 °C for 30 min with agitation), are sufficiently low as to permit its application to the analysis of 18 priority VOCs in natural and waste waters. In all cases compounds were detected below regulated levels

Ideal Body Size as a Mediator for the Gender-Specific Association Between Socioeconomic Status and Body Mass Index: Evidence From an Upper-Middle-Income Country in the African Region.

While obesity continues to rise globally, the associations between body size, gender, and socioeconomic status (SES) seem to vary in different populations, and little is known on the contribution of perceived ideal body size in the social disparity of obesity in African countries. We examined the gender and socioeconomic patterns of body mass index (BMI) and perceived ideal body size in the Seychelles, a middle-income small island state in the African region. We also assessed the potential role of perceived ideal body size as a mediator for the gender-specific association between SES and BMI. A population-based survey of 1,240 adults aged 25 to 64 years conducted in December 2013. Participants' BMI was calculated based on measured weight and height; ideal body size was assessed using a nine-silhouette instrument. Three SES indicators were considered: income, education, and occupation. BMI and perceived ideal body size were both higher among men of higher versus lower SES (p< .001) but lower among women of higher versus lower SES (p< .001), irrespective of the SES indicator used. Multivariate analysis showed a strong and direct association between perceived ideal body size and BMI in both men and women (p< .001) and was consistent with a potential mediating role of perceived ideal body size in the gender-specific associations between SES and BMI. Our study emphasizes the importance of gender and socioeconomic differences in BMI and ideal body size and suggests that public health interventions that promote perception of healthy weight could help mitigate SES-related disparities in BMI.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.

Occurrence of agrochemicals in surface waters of shallow soils and steep slopes cropped to tobacco

Tobacco cultivation in shallow soils and steep landscape under intense use of agrochemicals contributes to environment degradation. In this study, we assessed the concentration of agrochemicals in draw wells used for human consumption and a creek in a small catchment predominantly cropped to tobacco. Chlorpyrifos, flumetralin, and iprodione were determined by gas chromatography with electron capture detection, while imidalcloprid, atrazine, simazine, and clomazone were quantified by high-performance liquid chromatography with UV detection. Considering all sampling sites, all agrochemicals were detected at least once, except for flumetralin. The occurrence of agrochemicals in tobacco crops is a consequence of their fast transfer to surface water.

Wet oxidation of recalcitrant lignin waters: Experimental and kinetic studies

The dissertation is based on four articles dealing with recalcitrant lignin water purification. Lignin, a complicated substance and recalcitrant to most treatment technologies, inhibits seriously pulp and paper industry waste management. Therefore, lignin is studied, using WO as a process method for its degradation. A special attention is paid to the improvement in biodegradability and the reduction of lignin content, since they have special importance for any following biological treatment. In most cases wet oxidation is not used as a complete ' mineralization method but as a pre treatment in order to eliminate toxic components and to reduce the high level of organics produced. The combination of wet oxidation with a biological treatment can be a good option due to its effectiveness and its relatively low technology cost. The literature part gives an overview of Advanced Oxidation Processes (AOPs). A hot oxidation process, wet oxidation (WO), is investigated in detail and is the AOP process used in the research. The background and main principles of wet oxidation, its industrial applications, the combination of wet oxidation with other water treatment technologies, principal reactions in WO, and key aspects of modelling and reaction kinetics are presented. There is also given a wood composition and lignin characterization (chemical composition, structure and origin), lignin containing waters, lignin degradation and reuse possibilities, and purification practices for lignin containing waters. The aim of the research was to investigate the effect of the operating conditions of WO, such as temperature, partial pressure of oxygen, pH and initial concentration of wastewater, on the efficiency, and to enhance the process and estimate optimal conditions for WO of recalcitrant lignin waters. Two different waters are studied (a lignin water model solution and debarking water from paper industry) to give as appropriate conditions as possible. Due to the great importance of re using and minimizing the residues of industries, further research is carried out using residual ash of an Estonian power plant as a catalyst in wet oxidation of lignin-containing water. Developing a kinetic model that includes in the prediction such parameters as TOC gives the opportunity to estimate the amount of emerging inorganic substances (degradation rate of waste) and not only the decrease of COD and BOD. The degradation target compound, lignin is included into the model through its COD value (CODligning). Such a kinetic model can be valuable in developing WO treatment processes for lignin containing waters, or other wastewaters containing one or more target compounds. In the first article, wet oxidation of "pure" lignin water was investigated as a model case with the aim of degrading lignin and enhancing water biodegradability. The experiments were performed at various temperatures (110 -190°C), partial oxygen pressures (0.5 -1.5 MPa) and pH (5, 9 and 12). The experiments showed that increasing the temperature notably improved the processes efficiency. 75% lignin reduction was detected at the lowest temperature tested and lignin removal improved to 100% at 190°C. The effect of temperature on the COD removal rate was lower, but clearly detectable. 53% of organics were oxidized at 190°C. The effect of pH occurred mostly on lignin removal. Increasing the pH enhanced the lignin removal efficiency from 60% to nearly 100%. A good biodegradability ratio (over 0.5) was generally achieved. The aim of the second article was to develop a mathematical model for "pure" lignin wet oxidation using lumped characteristics of water (COD, BOD, TOC) and lignin concentration. The model agreed well with the experimental data (R2 = 0.93 at pH 5 and 12) and concentration changes during wet oxidation followed adequately the experimental results. The model also showed correctly the trend of biodegradability (BOD/COD) changes. In the third article, the purpose of the research was to estimate optimal conditions for wet oxidation (WO) of debarking water from the paper industry. The WO experiments were' performed at various temperatures, partial oxygen pressures and pH. The experiments showed that lignin degradation and organics removal are affected remarkably by temperature and pH. 78-97% lignin reduction was detected at different WO conditions. Initial pH 12 caused faster removal of tannins/lignin content; but initial pH 5 was more effective for removal of total organics, represented by COD and TOC. Most of the decrease in organic substances concentrations occurred in the first 60 minutes. The aim of the fourth article was to compare the behaviour of two reaction kinetic models, based on experiments of wet oxidation of industrial debarking water under different conditions. The simpler model took into account only the changes in COD, BOD and TOC; the advanced model was similar to the model used in the second article. Comparing the results of the models, the second model was found to be more suitable for describing the kinetics of wet oxidation of debarking water. The significance of the reactions involved was compared on the basis of the model: for instance, lignin degraded first to other chemically oxidizable compounds rather than directly to biodegradable products. Catalytic wet oxidation of lignin containing waters is briefly presented at the end of the dissertation. Two completely different catalysts were used: a commercial Pt catalyst and waste power plant ash. CWO showed good performance using 1 g/L of residual ash gave lignin removal of 86% and COD removal of 39% at 150°C (a lower temperature and pressure than with WO). It was noted that the ash catalyst caused a remarkable removal rate for lignin degradation already during the pre heating for `zero' time, 58% of lignin was degraded. In general, wet oxidation is not recommended for use as a complete mineralization method, but as a pre treatment phase to eliminate toxic or difficultly biodegradable components and to reduce the high level of organics. Biological treatment is an appropriate post treatment method since easily biodegradable organic matter remains after the WO process. The combination of wet oxidation with subsequent biological treatment can be an effective option for the treatment of lignin containing waters.

Separation of Gas Bubbles from Circulation Waters and Pulp Suspensions in Open Channel Flow

The objective of this thesis was to study the removal of gases from paper mill circulation waters experimentally and to provide data for CFD modeling. Flow and bubble size measurements were carried out in a laboratory scale open gas separation channel. Particle Image Velocimetry (PIV) technique was used to measure the gas and liquid flow fields, while bubble size measurements were conducted using digital imaging technique with back light illumination. Samples of paper machine waters as well as a model solution were used for the experiments. The PIV results show that the gas bubbles near the feed position have the tendency to escape from the circulation channel at a faster rate than those bubbles which are further away from the feed position. This was due to an increased rate of bubble coalescence as a result of the relatively larger bubbles near the feed position. Moreover, a close similarity between the measured slip velocities of the paper mill waters and that of literature values was obtained. It was found that due to dilution of paper mill waters, the observed average bubble size was considerably large as compared to the average bubble sizes in real industrial pulp suspension and circulation waters. Among the studied solutions, the model solution has the highest average drag coefficient value due to its relatively high viscosity. The results were compared to a 2D steady sate CFD simulation model. A standard Euler-Euler k-ε turbulence model was used in the simulations. The channel free surface was modeled as a degassing boundary. From the drag models used in the simulations, the Grace drag model gave velocity fields closest to the experimental values. In general, the results obtained from experiments and CFD simulations are in good qualitative agreement.

Exploring potentialities of the HR-CS FAAS technique in the determination of Ni and Pb in mineral waters

National Health Surveillance Agency (ANVISA) established in the decree number 54 maximum allowed levels for Ni and Pb in mineral and natural waters at 20 µg L-1 and 10 µg L-1, respectively. For screening analysis purposes, the high-resolution continuum source flame atomic absorption spectrometry technique (HR-CS FAAS) was evaluated for the fast-sequential determination of nickel and lead in mineral waters.Two atomic lines for Ni (232.003 nm - main and 341.477 nm - secondary) and Pb (217.0005 nm - main and 283.306 nm - secondary) at different wavelength integrated absorbance (number of pixels) were evaluated. Sensitivity enhanced with the increase of the number of pixels and with the summation of the atomic lines absorbances. The main figures of merit associated to the HR-CS FAAS technique were compared with that obtained by line-source flame atomic absorption spectrometry (LS FAAS). Water samples were pre-concentrated about 5-fold by evaporation before analysis. Recoveries of Pb significantly varied with increased wavelength integrated absorbance. Better recoveries (92-93%) were observed for higher number of pixels at the main line or summating the atomic lines (90-92%). This influence was irrelevant for Ni, and recoveries in the 92-104% range were obtained in all situations.

Flow injection visible diffuse reflectance quantitative analysis of total sulfur in biodiesel, in plant leaves and in natural waters

Flow injection (FI) methodology, using diffuse reflectance in the visible region of the spectrum, for the analysis of total sulfur in the form of sulfate, precipitated in the form of barium sulfate, is presented. The method was applied to biodiesel, to plant leaves and to natural waters analysis. The analytical signal (S) correlates linearly with sulfate concentration (C) between 20 and 120 ppm, through the equation S=-1.138+0.0934 C (r = 0.9993). The experimentally observed limit of detection is about 10 ppm. The mean R.S.D. is about 3.0 %. Real samples containing sulfate were analyzed and the results obtained by the FI and by the reference batch turbidimetric method using the statistical Student's t-test and F-test were compared.

Determination of Alkalinity and dissociation constants of high salinity waters: use of F5BC titration function

Measurements of parameters expressed in terms of carbonic species such as Alkalinity and Acidity of saline waters do not analyze the influence of external parameters to the titration such as Total free and associated Carbonic Species Concentration, activity coefficient, ion pairing formation and Residual Liquid Junction Potential in pH measurements. This paper shows the development of F5BC titration function based on the titrations developed by Gran (1952) for the carbonate system of natural waters. For practical use, samples of saline waters from Pocinhos reservoir in Paraiba were submitted to titration and linear regression analysis. Results showed that F5BC involves F1x and F2x Gran functions determination, respectively, for Alkalinity and Acidity calculations without knowing "a priori" the endpoint of the titration. F5BC also allows the determination of the First and Second Apparent Dissociation Constant of the carbonate system of saline and high ionic strength waters.

The Peace and Security Council of the African Union : its relationship with the United Nations, African Union and sub-regional mechanisms

Avhandlingen undersöker den Afrikanska Unionens freds- och säkerhetsråd och dess roll i framhävandet och upprätthållandet av fred, säkerhet och stabilitet i Afrika. Detta freds- och säkerhetsråd etablerades formellt 2004 och opererar under den Afrikanska Unionen (AU) som å sin sida upprättades 2002. Den Afrikanska Unionens freds- och säkerhetsråds roll i framhävandet av fred, säkerhet och stabilitet gör rådet till en hörnsten inom ramen för konfliktförebyggande och -hantering, samt konfliktlösning på den afrikanska kontinenten. Den Afrikanska Unionens freds- och säkerhetsråd spelar också en högst viktig roll i implementeringen av ansvaret att beskydda civilbefolkningen i konfliktsituationer. För uppfyllandet av sitt mandat att framhäva och upprätthålla fred, säkerhet och stabilitet i Afrika krävs det att freds- och säkerhetsrådet samarbetar med andra institutioner och mekanismer som handhar internationella och regionala freds- och säkerhetsärenden. Avhandlingen analyserar tre dimensioner av denna typ av relationer som freds- och säkerhetsrådet bör etablera med dessa organ och mekanismer för att kunna utföra sitt mandat effektivt. Först analyseras relationen mellan Afrikanska Unionens freds- och säkerhetsråd och Förenta Nationernas säkerhetsråd som också beskrivs i artikel 17 (1) i protokollet som förde till etablerandet av AU:s freds- och säkerhetsråd. Analysen understryker FN:s säkerhetsråd som det organ som bär det primära ansvaret i förhållande till fred och säkerhet, medan AU:s freds- och säkerhetsråd fungerar som en kompletterande komponent i sin roll som ett regionalt organ. Avhandlingen fortsätter med att analysera förhållandet mellan AU:s freds- och säkerhetsråd och andra organ inom AU, samt andra relevanta institutioner som framgår av artikel 10, 18 (1), 19 och 20 i protokollet för rådets etablerande. Avhandlingen diskuterar i detalj hur samarbetet mellan AU:s freds- och säkerhetsråd och dessa institutioner och organ kunde förstärkas till fördel för effektivt framhävande och upprätthållande av fred och säkerhet i Afrika. Slutligen analyserar avhandlingen samarbetet mellan AU:s freds- och säkerhetsråd och sub-regionala mekanismer etablerade under regionala ekonomiska gemenskaper som beskrivs i artikel 16 i protokollet för etablerandet av rådet. Avhandlingen diskuterar i detalj rollen för de sub-regionala mekanismerna i den afrikanska freds- och säkerhetsarkitekturen. Avhandlingen diskuterar vidare förhållandet mellan de sub-regionala mekanismerna och den afrikanska stand-by styrkan ASF och förutsättningarna för detta arrangemang att bemöta afrikanska konflikter. Avhandlingen fokuserar också på en harmoniserings- och samarbetsprocess i förhållande till de sub-regionala mekanismerna, de regionala ekonomiska gemenskaperna och den Afrikanska Unionens freds- och säkerhetsråd. Kort sagt beskriver avhandlingen hur förhållandet mellan AU:s freds- och säkerhetsråd och de ovan nämnda organ och mekanismer har en faktisk och potentiell möjlighet att effektivt bidra till fred, säkerhet och stabilitet i Afrika. Avhandlingen identifierar utmaningarna kring att göra detta till ett fungerande förhållande samtidigt som den genererar både generella och specifika rekommendationer om hur dessa utmaningar bäst kan bemötas. Några av dessa utmaningar utgörs av följande aspekter: konflikten mellan AU:s och FN:s reglemang i bemötandet av freds- och säkerhetsutmaningar; de olika metoderna i FN och AU vid implementeringen av principen av universell jurisdiktion; konflikten mellan de olika mandaten som AU:s freds- och säkerhetsråd och FN:s säkerhetsråd har i förhållande till implementeringen av principen om intervention; och konflikten mellan lagarna och metoderna i förhållande till AU:s freds- och säkerhetsråd och de regionala mekanismerna. En av de huvudsakliga rekommendationerna i avhandlingen i bemötandet av de ovan nämnda utmaningarna är att harmonisera de olika systemen för att försäkra att det föreligger ett samordnat bemötande av konflikter i Afrika. Efter att ha identifierat luckorna i AU:s freds- och säkerhetsprotokoll med speciell fokus på förhållandet mellan rådet och de relevanta organen och mekanismerna rekommenderar avhandlingen ett antal tillägg och modifieringar till instrumentet ifråga för att effektivera, stärka och upprätthålla detta förhållande. Avhandlingen föreslår att dessa tillägg och modifieringar skulle företas under 2014 då detta år markerar 10 år efter att AU:s freds- och säkerhetsråd etablerades. Idén bakom detta företagandet ligger i att 10 år torde vara en tillfredställande tidsperiod för att mäta hur freds- och säkerhetsrådet har fungerat och hur dess förhållande med de relevanta institutionerna och mekanismerna kunde förbättras. Avhandlingen representerar den bredaste och nyaste studien inom ramen för artikel 16, 17, 18, 19 och 20 i protokollet för AU:s freds- och säkerhetsråd och introducerar ett innovativt bemötande av utmaningar till fred, säkerhet och stabilitet på den afrikanska kontinenten. Avhandlingen bidrar till teorin och praxisen i AU:s freds- och säkerhetsråd vilket kan vara av intresse för både forskare och praktiker i folkrätt såväl som i internationella freds- och säkerhetsstudier, speciellt i Afrika.

Soil salinization and maize and cowpea yield in the crop rotation system using saline waters

The use of saline water and the reuse of drainage water for irrigation depend on long-term strategies that ensure the sustainability of socio-economic and environmental impacts of agricultural systems. In this study, it was evaluated the effects of irrigation with saline water in the dry season and fresh water in the rainy season on the soil salt accumulation yield of maize and cowpea, in a crop rotation system. The experiment was conducted in the field, using a randomized complete block design, with five replications. The first crop was installed during the dry season of 2007, with maize irrigated with water of different salinities (0.8, 2.2, 3.6 and 5.0 dS m-1). The maize plants were harvested at 90 days after sowing (DAS), and vegetative growth, dry mass of 1000 seeds and grain yield were evaluated. The same plots were utilized for the cultivation of cowpea, during the rainy season of 2008. At the end of the crop, cycle plants of this species were harvested, being evaluated the vegetative growth and plant yield. Soil samples were collected before and after maize and cowpea cultivation. The salinity of irrigation water above 2.2 dS m-1 reduced the yield of maize during the dry season. The high total rainfall during the rainy season resulted in leaching of salts accumulated during cultivation in the dry season, and eliminated the possible negative effects of salinity on cowpea plants. However, this crop showed atypical behavior with a significant proportion of vegetative mass and low pod production, which reduced the efficiency of this strategy of crop rotation under the conditions of this study.