Percutaneous sciatic nerve block with tramadol induces analgesia and motor blockade in two animal pain models

Local anesthetic efficacy of tramadol has been reported following intradermal application. Our aim was to investigate the effect of perineural tramadol as the sole analgesic in two pain models. Male Wistar rats (280-380 g; N = 5/group) were used in these experiments. A neurostimulation-guided sciatic nerve block was performed and 2% lidocaine or tramadol (1.25 and 5 mg) was perineurally injected in two different animal pain models. In the flinching behavior test, the number of flinches was evaluated and in the plantar incision model, mechanical and heat thresholds were measured. Motor effects of lidocaine and tramadol were quantified and a motor block score elaborated. Tramadol, 1.25 mg, completely blocked the first and reduced the second phase of the flinching behavior test. In the plantar incision model, tramadol (1.25 mg) increased both paw withdrawal latency in response to radiant heat (8.3 ± 1.1, 12.7 ± 1.8, 8.4 ± 0.8, and 11.1 ± 3.3 s) and mechanical threshold in response to von Frey filaments (459 ± 82.8, 447.5 ± 91.7, 320.1 ± 120, 126.43 ± 92.8 mN) at 5, 15, 30, and 60 min, respectively. Sham block or contralateral sciatic nerve block did not differ from perineural saline injection throughout the study in either model. The effect of tramadol was not antagonized by intraperitoneal naloxone. High dose tramadol (5 mg) blocked motor function as well as 2% lidocaine. In conclusion, tramadol blocks nociception and motor function in vivo similar to local anesthetics.

Animal models of prenatal immune challenge and their contribution to the study of schizophrenia: a systematic review

Prenatal immune challenge (PIC) in pregnant rodents produces offspring with abnormalities in behavior, histology, and gene expression that are reminiscent of schizophrenia and autism. Based on this, the goal of this article was to review the main contributions of PIC models, especially the one using the viral-mimetic particle polyriboinosinic-polyribocytidylic acid (poly-I:C), to the understanding of the etiology, biological basis and treatment of schizophrenia. This systematic review consisted of a search of available web databases (PubMed, SciELO, LILACS, PsycINFO, and ISI Web of Knowledge) for original studies published in the last 10 years (May 2001 to October 2011) concerning animal models of PIC, focusing on those using poly-I:C. The results showed that the PIC model with poly-I:C is able to mimic the prodrome and both the positive and negative/cognitive dimensions of schizophrenia, depending on the specific gestation time window of the immune challenge. The model resembles the neurobiology and etiology of schizophrenia and has good predictive value. In conclusion, this model is a robust tool for the identification of novel molecular targets during prenatal life, adolescence and adulthood that might contribute to the development of preventive and/or treatment strategies (targeting specific symptoms, i.e., positive or negative/cognitive) for this devastating mental disorder, also presenting biosafety as compared to viral infection models. One limitation of this model is the incapacity to model the full spectrum of immune responses normally induced by viral exposure.

A spheroid-based 3-D culture model for pancreatic cancer drug testing, using the acid phosphatase assay

Current therapy for pancreatic cancer is multimodal, involving surgery and chemotherapy. However, development of pancreatic cancer therapies requires a thorough evaluation of drug efficacy in vitro before animal testing and subsequent clinical trials. Compared to two-dimensional culture of cell monolayer, three-dimensional (3-D) models more closely mimic native tissues, since the tumor microenvironment established in 3-D models often plays a significant role in cancer progression and cellular responses to the drugs. Accumulating evidence has highlighted the benefits of 3-D in vitro models of various cancers. In the present study, we have developed a spheroid-based, 3-D culture of pancreatic cancer cell lines MIAPaCa-2 and PANC-1 for pancreatic drug testing, using the acid phosphatase assay. Drug efficacy testing showed that spheroids had much higher drug resistance than monolayers. This model, which is characteristically reproducible and easy and offers rapid handling, is the preferred choice for filling the gap between monolayer cell cultures and in vivo models in the process of drug development and testing for pancreatic cancer.

Air blast freezing of fruit pulp models in commercial boxes: influence of preferential channels in the bed on freezing times estimating

The freezing times of fruit pulp models packed and conditioned in multi-layered boxes were evaluated under conditions similar to those employed commercially. Estimating the freezing time is a difficult practice due to the presence of significant voids in the boxes, whose influence may be analyzed by means of various methods. In this study, a procedure for estimating freezing time by using the models described in the literature was compared with experimental measurements by collecting time/temperature data. The following results show that the airflow through packages is a significant parameter for freezing time estimation. When the presence of preferential channels was considered, the predicted freezing time in the models could be 10% lower than the experimental values, depending on the method. The isotherms traced as a function of the location of the samples inside the boxes showed the displacement of the thermal center in relation to the geometric center of the product.

Application of mathematical models for the prediction of adsorption isotherms in solid mixture for mango powder refreshment

Solid mixtures for refreshment are already totally integrated to the Brazilian consumers' daily routine, because of their quick preparation method, yield and reasonable price - quite lower if compared to 'ready-to-drink' products or products for prompt consumption, what makes them economically more accessible to low-income populations. Within such a context, the aim of this work was to evaluate the physicochemical and mineral composition, as well as the hygroscopic behavior of four different brands of solid mixture for mango refreshment. The BET, GAB, Oswim and Henderson mathematical models were built through the adjustment of experimental data to the isotherms of adsorption. Results from the physiochemical evaluation showed that the solid mixtures for refreshments are considerable sources of ascorbic acid and reductor sugar; and regarding mineral compounds, they are significant sources of calcium, sodium and potassium. It was also verified that the solid mixtures for refreshments of the four studied brands are considered highly hygroscopic.

Computational models for and from biology : simple gene assembly and reaction systems

The advancement of science and technology makes it clear that no single perspective is any longer sufficient to describe the true nature of any phenomenon. That is why the interdisciplinary research is gaining more attention overtime. An excellent example of this type of research is natural computing which stands on the borderline between biology and computer science. The contribution of research done in natural computing is twofold: on one hand, it sheds light into how nature works and how it processes information and, on the other hand, it provides some guidelines on how to design bio-inspired technologies. The first direction in this thesis focuses on a nature-inspired process called gene assembly in ciliates. The second one studies reaction systems, as a modeling framework with its rationale built upon the biochemical interactions happening within a cell. The process of gene assembly in ciliates has attracted a lot of attention as a research topic in the past 15 years. Two main modelling frameworks have been initially proposed in the end of 1990s to capture ciliates’ gene assembly process, namely the intermolecular model and the intramolecular model. They were followed by other model proposals such as templatebased assembly and DNA rearrangement pathways recombination models. In this thesis we are interested in a variation of the intramolecular model called simple gene assembly model, which focuses on the simplest possible folds in the assembly process. We propose a new framework called directed overlap-inclusion (DOI) graphs to overcome the limitations that previously introduced models faced in capturing all the combinatorial details of the simple gene assembly process. We investigate a number of combinatorial properties of these graphs, including a necessary property in terms of forbidden induced subgraphs. We also introduce DOI graph-based rewriting rules that capture all the operations of the simple gene assembly model and prove that they are equivalent to the string-based formalization of the model. Reaction systems (RS) is another nature-inspired modeling framework that is studied in this thesis. Reaction systems’ rationale is based upon two main regulation mechanisms, facilitation and inhibition, which control the interactions between biochemical reactions. Reaction systems is a complementary modeling framework to traditional quantitative frameworks, focusing on explicit cause-effect relationships between reactions. The explicit formulation of facilitation and inhibition mechanisms behind reactions, as well as the focus on interactions between reactions (rather than dynamics of concentrations) makes their applicability potentially wide and useful beyond biological case studies. In this thesis, we construct a reaction system model corresponding to the heat shock response mechanism based on a novel concept of dominance graph that captures the competition on resources in the ODE model. We also introduce for RS various concepts inspired by biology, e.g., mass conservation, steady state, periodicity, etc., to do model checking of the reaction systems based models. We prove that the complexity of the decision problems related to these properties varies from P to NP- and coNP-complete to PSPACE-complete. We further focus on the mass conservation relation in an RS and introduce the conservation dependency graph to capture the relation between the species and also propose an algorithm to list the conserved sets of a given reaction system.

Heat Demand Forecasting Models’ Development: Use of Data Mining Tools in SQL Server Analysis Services

This thesis introduces heat demand forecasting models which are generated by using data mining algorithms. The forecast spans one full day and this forecast can be used in regulating heat consumption of buildings. For training the data mining models, two years of heat consumption data from a case building and weather measurement data from Finnish Meteorological Institute are used. The thesis utilizes Microsoft SQL Server Analysis Services data mining tools in generating the data mining models and CRISP-DM process framework to implement the research. Results show that the built models can predict heat demand at best with mean average percentage errors of 3.8% for 24-h profile and 5.9% for full day. A deployment model for integrating the generated data mining models into an existing building energy management system is also discussed.

Valuation models and Simon's bounded rationality

This paper aims at reconciling the evidence that sophisticated valuation models are increasingly used by companies in their investment appraisal with the literature of bounded rationality, according to which objective optimization is impracticable in the real world because it would demand an immense level of sophistication of the analytical and computational processes of human beings. We show how normative valuation models should rather be viewed as forms of reality representation, frameworks according to which the real world is perceived, fragmented for a better understanding, and recomposed, providing an orderly method for undertaking a task as complex as the investment decision.

Effect of iron on reactivity of vanillin in wine models /

Phenolic compounds are important components of grapes and wines. They have been found to have important roles in grape and wine systems and properties that are beneficial for human health. Vanillin (3-methoxy-4-hydroxybenzaldehyde) is a phenolic compound coming from the oxidative degradation of lignin in oak-barrels during the aging of wine. Vanillin is an important flavour component of wine and its concentration in wine influences significantly the aroma and flavour of wine. The concentration of vanillin in wine is affected by various factors including the presence of metal ions. In this work, by using HPLC, HPLC-MS, and MS technologies, iron (III) cations were found to affect the oxidation of vanillin in a model system of wine, and the product of the oxidation was identified as divanillin. The mechanism of the redox reaction between vanillin and Fe^"^ is thought to follow that of other phenol oxidations. Increasing the concentration of Fe ^ in the model system accelerates divanillin production. The best pH condition for the divanillin production in the system is the range of 3.0 ~ 3.5. Increasing temperature from 20°C to 40°C accelerates the divanillin production. Divanillin was found to exist in three commercial red wines in this work. Keeping the storage temperature cool and decreasing the contact of grapes and wines with iron are two major measures suggested by this work in order to decrease the oxidation of vanillin during the making and aging of wine.

Methods to Estimate Dynamic Stochastic General Equilibrium Models

This paper employs the one-sector Real Business Cycle model as a testing ground for four different procedures to estimate Dynamic Stochastic General Equilibrium (DSGE) models. The procedures are: 1 ) Maximum Likelihood, with and without measurement errors and incorporating Bayesian priors, 2) Generalized Method of Moments, 3) Simulated Method of Moments, and 4) Indirect Inference. Monte Carlo analysis indicates that all procedures deliver reasonably good estimates under the null hypothesis. However, there are substantial differences in statistical and computational efficiency in the small samples currently available to estimate DSGE models. GMM and SMM appear to be more robust to misspecification than the alternative procedures. The implications of the stochastic singularity of DSGE models for each estimation method are fully discussed.

The invisibility of privilege: a critique of intersectional models of identity

In this paper, I argue that intersectionality, the prevailing way of conceptualizing the relation between axes or systems of oppression (race, class, gender), illicitly imports the very model it purports to overcome: that is, the unitary model of identity. I first define “intersectionality” and distinguish between three senses that are frequently conflated. Then I subject the model to an analytic critique, revealing its hidden presuppositions about identity. Finally, I suggest that solidarity serves as a better norm for feminist practice than inclusion of “difference,” which seems to be the norm underlying many intersectional accounts.

Models and algorithms for the capacitated location-routing problem

Le problème de localisation-routage avec capacités (PLRC) apparaît comme un problème clé dans la conception de réseaux de distribution de marchandises. Il généralisele problème de localisation avec capacités (PLC) ainsi que le problème de tournées de véhicules à multiples dépôts (PTVMD), le premier en ajoutant des décisions liées au routage et le deuxième en ajoutant des décisions liées à la localisation des dépôts. Dans cette thèse on dévelope des outils pour résoudre le PLRC à l’aide de la programmation mathématique. Dans le chapitre 3, on introduit trois nouveaux modèles pour le PLRC basés sur des flots de véhicules et des flots de commodités, et on montre comment ceux-ci dominent, en termes de la qualité de la borne inférieure, la formulation originale à deux indices [19]. Des nouvelles inégalités valides ont été dévelopées et ajoutées aux modèles, de même que des inégalités connues. De nouveaux algorithmes de séparation ont aussi été dévelopés qui dans la plupart de cas généralisent ceux trouvés dans la litterature. Les résultats numériques montrent que ces modèles de flot sont en fait utiles pour résoudre des instances de petite à moyenne taille. Dans le chapitre 4, on présente une nouvelle méthode de génération de colonnes basée sur une formulation de partition d’ensemble. Le sous-problème consiste en un problème de plus court chemin avec capacités (PCCC). En particulier, on utilise une relaxation de ce problème dans laquelle il est possible de produire des routes avec des cycles de longueur trois ou plus. Ceci est complété par des nouvelles coupes qui permettent de réduire encore davantage le saut d’intégralité en même temps que de défavoriser l’apparition de cycles dans les routes. Ces résultats suggèrent que cette méthode fournit la meilleure méthode exacte pour le PLRC. Dans le chapitre 5, on introduit une nouvelle méthode heuristique pour le PLRC. Premièrement, on démarre une méthode randomisée de type GRASP pour trouver un premier ensemble de solutions de bonne qualité. Les solutions de cet ensemble sont alors combinées de façon à les améliorer. Finalement, on démarre une méthode de type détruir et réparer basée sur la résolution d’un nouveau modèle de localisation et réaffectation qui généralise le problème de réaffectaction [48].

Modélisation toxicocinétique du benzo(a)pyrène et 3-hydroxybenzo(a)pyrène pour l’interprétation des données de surveillance biologique de l’exposition chez les travailleurs

De nombreux travailleurs sont exposés aux hydrocarbures aromatiques polycycliques (HAP). Le benzo(a)pyrène (BaP) fait partie de ce groupe de polluants. Cette substance a été classée cancérogène reconnu chez l’humain. Pour évaluer l'exposition aux HAP cancérogènes, plusieurs chercheurs ont proposé d’utiliser la mesure du 3-hydroxybenzo(a)pyrène (3-OHBaP) dans l’urine des travailleurs exposés. Dans le cadre du présent projet, deux approches de modélisation ont été développées et appliquées pour permettre une meilleure compréhension de la toxicocinétique du BaP et son biomarqueur d’intérêt actuel, le 3-OHBaP, et pour aider à interpréter les résultats de surveillance biologique. Un modèle toxicocinétique à plusieurs compartiments a été développé sur la base des données préalablement obtenues sur le rat par notre groupe. Selon le modèle, le BaP injecté par voie intraveineuse est rapidement distribué du sang vers les tissus (t½ ≈ 4 h), avec une affinité particulière pour les poumons et les composantes lipidiques des tissus. Le BaP est ensuite distribué vers la peau et le foie. Au foie, le BaP est promptement métabolisé et le 3-OHBaP est formé avec une demi-vie de ≈ 3 h. Le métabolisme pulmonaire du BaP a également été pris en compte, mais sa contribution à la cinétique globale du BaP a été jugée négligeable. Une fois formé, le 3-OHBaP est distribué vers les différents organes presque aussi rapidement que la molécule mère (t½ ≈ 2 h). Le profil temporel du 3-OHBaP dans le rein montre une accumulation transitoire en raison de la différence observée entre le taux d’entrée (t½ = 28 min) et le taux de sortie (t½ = 4,5 h). La clairance totale de 3-OHBaP du corps est principalement gouvernée par le taux de transfert de la bile vers le tractus gastro-intestinal (t½ ≈ 4 h). Le modèle toxicocinétique à plusieurs compartiments a réussi à simuler un ensemble indépendant de profils urinaires publiés sur le 3-OHBaP. Ce modèle toxicocinétique à compartiments s'est avéré utile pour la determination des facteurs biologiques déterminants de la cinétique du BaP et du 3-OHBaP. Par la suite, un modèle pharmacocinétique à base physiologique (PCBP) reproduisant le devenir du BaP et du 3-OHBaP chez le rat a été construit. Les organes (ou tissus) représentés comme des compartiments ont été choisis en fonction de données expérimentales obtenues in vivo chez le rat. Les coefficients de partition, les coefficients de perméabilité, les taux de métabolisation, les paramètres d'excrétion, les fractions absorbées et les taux d'absorption pour différentes voies d’exposition ont été obtenus directement à partir des profils sanguins, tissulaires, urinaires et fécaux du BaP et du 3-OHBaP. Les valeurs de ces derniers paramètres ont été calculées par des procédures Monte-Carlo. Des analyses de sensibilité ont ensuite été réalisées pour s’assurer de la stabilité du modèle et pour établir les paramètres les plus sensibles de la cinétique globale. Cette modélisation a permis d’identifier les facteurs déterminants de la cinétique: 1) la sensibilité élevée des paramètres de la métabolisation hépatique du BaP et du 3-OHBaP ainsi que du taux d'élimination; 2) la forte distribution du BaP dans les poumons par rapport à d'autres tissus; 3) la distribution considérable du BaP dans les tissus adipeux et le foie; 4) la forte distribution du 3-OHBaP dans les reins; 5) le transfert limité du BaP par la diffusion tissulaire dans les poumons; 6) le transfert limité du 3-OHBaP par la diffusion tissulaire dans les poumons, les tissus adipeux et les reins; 7) la recirculation entéro-hépatique significative du 3-OHBaP. Suite à des analyses de qualité des ajustements des équations du modèle aux données observées, les probabilités que les simulations reproduisent les données expérimentales par pur hasard se sont avérées toujours inférieures à 10% pour les quatre voies d’exposition : intraveineuse, orale, cutanée et respiratoire. Nous avons extrapolé les modèles cinétiques du rat à l’humain afin de se doter d’un outil permettant de reconstituer les doses absorbées chez des travailleurs exposés dans diverses industries à partir de mesures de l'évolution temporelle du 3-OHBaP dans leur urine. Les résultats de ces modélisations ont ensuite été comparés à ceux de simulations obtenues avec un modèle toxicocinétique à compartiment unique pour vérifier l’utilité comparative d’un modèle simple et complexe. Les deux types de modèle ont ainsi été construits à partir de profils sanguins, tissulaires, urinaires et fécaux du BaP et du 3-OHBaP sur des rats exposés. Ces données ont été obtenues in vivo par voie intraveineuse, cutanée, respiratoire et orale. Ensuite, les modèles ont été extrapolés à l’humain en tenant compte des déterminants biologiques essentiels des différences cinétiques entre le rat et l’humain. Les résultats ont montré que l'inhalation n'était pas la principale voie d'exposition pour plusieurs travailleurs étudiés. Les valeurs de concentrations de BaP dans l’air utilisées afin de simuler les profils d’excrétion urinaire chez les travailleurs étaient différentes des valeurs de concentrations de BaP mesurées dans l’air. Une exposition au BaP par voie cutanée semblait mieux prédire les profils temporels observés. Finalement, les deux types de modélisation se sont avérés utiles pour reproduire et pour interpréter les données disponibles chez des travailleurs.