944 resultados para 1-min average


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The slope of the distance-time relationship from maximal 200 and 400 in bouts (S(200-400)) has been increasingly employed for setting training intensities in swimming. However, physiological and mechanical responses at this speed are poorly understood. Thus, this study investigated blood lactate, heart rate (HR), stroke rate (SR), stroke length (SL) and RPE responses to an interval swimming set at S(200-400) in trained swimmers. In a 50-m pool, twelve athletes (16.5 +/- 1.2 yr, 176 +/- 7 cm, 68.4 +/- 5.4 kg, and 7.8 +/- 2.5% body fat) performed maximal 200 and 400 m crawl trials for S(200-400) determination (1.28 +/- 0.05 m/s). Thereafter, swimmers were instructed to perform 5 x 400 in at this speed with 1.5 min rest between repetitions. Three athletes Could not complete the set (exhaustion at 21.0 +/- 3.1 min). For the remaining swimmers (total set duration = 32.0 +/- 1.3 min) significant increases) (p < 0.05) in blood lactate (5.7 +/- 0.8-7.9 +/- 2.4 mmol/l), SR (29.6 +/- 3.2-32.1 +/- 4.1 cycles/min), HR (169 +/- 11-181 +/- 8 bpm) and RPE (13.3 +/- 1.6-16.3 +/- 2.6) were observed through the IS. Conversely, SL decreased significantly (p < 0.05) from the first to the fifth repetition (2.48 +/- 0.22-2.31 +/- 0.24 m/cycle). These results suggest that interval swimming at S(200-400) represents an intense physiological, mechanical and perceptual stimulus that can be sustained for a prolonged period by most athletes. (C) 2008 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Background and Objectives - A controversy exists in the literature regarding the effects of the acute administration of magnesium on the cardiovascular system of animals and humans. The purpose of this study was to evaluate the effects of hypermagnesemia on the cardiovascular hemodynamics of dogs. Methods - Sixteen mongrel dogs were anesthetized with pentobarbitone 30 mg.kg-1 and submitted to volume expansion with Ringer's solution (0.4 ml.kg-1.min-1 and mechanical ventilation with room air. In this model, the hemodynamic repercussions of the following drugs and doses were studied. pentobarbitone 5 mg.kg-1 Group 1, control - and the association of pentobarbitone and magnesium sulphate (MS), at the dose of 140 mg.kg-1 injected in 15 minutes, followed by an infusion of 80 mg.kg-1.h-1 - Group 2. The parameters studied were: heart rate, blood pressure, inferior vena cava pressure, cardiac index, systolic index and peripheral resistance index, evaluated at 5 different moments: 15(M1), 30(M2), 60(M3) and 75(M4) minutes after the first suppplementary dose of pentobarbitone and 15 minutes (M5) after the second supplementary dose. In Group 2, the moments M3, M4, M5 corresponded to 15, 30 and 60 minutes after the priming dose of magnesium sulphate. Results - Group 1 animals exhibited tachycardia since the beginning of the experiment. There was a decrease in the cardiac index, in the systolic index and an increase in the inferior vena cava pressure. Group 2 animals also exhibited tachycardia, but heart rate decreased after MS infusion. The blood pressure and the peripheral resistance index decreased. The systolic index increased and the cardiac index decreased only at the end of the experiment. Conclusions: The antiadrenergic effects of MS could have been responsible for the decrease in heart rate. The vasodilating effects of the magnesium induced the decrease in the peripheral resistance index. The systolic index increased, showing that myocardial depression did not occur.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The effects of metaraminol bitartrate on intraocular pressure (IOP) were studied in dogs anesthetized with halothane. Forty-five healthy, adult, mixed-breed dogs, of both sexes, were divided into three groups of 15 dogs each (GI, GII and GIII) and maintained under general anesthesia with halothane after tranquilization with levomepromazine and induction with thiopental. Saline (0.9%) was administered intravenously (IV) to GI through continuous infusion, at a velocity of 0.125 mL kg -1 min -1. GII and GIII received metaraminol 0.004% IV, at a dose of 5 μg kg -1 min -1, at 0.125 mL kg -1 min -1 and at a dose of 2 μg kg -1 min -1, at 0.06 mL kg -1 min -1, respectively. IOP was measured by applanation tonometry (Tono-Pen) before and during anesthesia. Results showed that IOP decreased in GI, increased in GII, and remained at basal levels in GIII. Continuous infusion of metaraminol at 2 μg kg min -1 maintained IOP at pretest levels, while infusion at 5 μg kg -1 min -1 produced an elevation of IOP.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Backgrounds and Objectives: Both continuous venous anesthesia with propofol and inhalational anesthesia with sevoflurane propitiate fast arousal with few side effects. The aim of this study was to compare the arousal and post anesthestic recovery times in patients submitted to these two agents. Methods: Forty three patient aged 18 to 50 years, physical status I or II, submitted to gynecological laparoscopy were distributed in two groups: G1 - propofol in continuous infusion of 115 μg.kg -1.min -1 and G2 sevoflurane. All the patients were pre-medicated with 7.5 mg midazolam, sufentanil 0.5 μg.kg -1, propofol 2 mg.kg -1, atracurium 0.5 mg.kg -1, N 2O in 50% of oxygen in a no-rebreathing system. The depth of the anesthesia and arousal time were assessed by the Bispectral index (BIS). The time between end of anesthesia and eye opening, time for command response and time for orientation were also evaluated. Results: The times recorded in minutes were: G1 - eye opening 8.2 ± 2.9, command response 8.6 ± 3.1, orientation 9.8 ± 3.4, recovery 31.6 ± 3.8; G2 - eye opening 4.5 ± 3, command response 4.9 ± 3.4, orientation 6.2 ± 3.4, recovery 66 ± 8. Except the recovery time, all the values were larger in G1. Conclusions: Both intravenous propofol or inhalational sevoflurane were considered excellent anesthetic techniques as to recovery time and recovery room discharge. Sevoflurane provided an earlier arousal with a longer recovery room stay as compared to propofol.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Background and Objectives - Allopurinol is a drug which inhibits the formation of noxious renal free radicals. The aim of this study was to evaluate the protecting renal effects of allopurinol in ischemic kidneys of dogs. Methods - Sixteen dogs were anesthetized with sodium pentobarbital and submitted to extracellular volume expansion (1.4 ml.kg-1.min-1), to mechanic ventilation with air, to right nephrectomy and to left renal artery clamping. Changes which might occur in renal morphology and function after 30 min of total ischemia and posterior reperfusion were studied in Group 1 (G1), in addition to the action of allopurinol (50 mg.kg-1) on those kidneys, when administered 24 h before the experiment and 1 h before the ischemic procedure in Group 2 (G2). The following parameters: heart rate, inferior vena cava pressure, mean blood pressure, PAH clearance (PAH(c)), renal blood flow (RBF), renal vascular resistance (RVR), creatinine clearance (Cr(c)), filtration fraction, urine output, plasma and urine osmolality, osmolar clearance, free water, sodium and potassium clearance, urine and fractional sodium and potassium excretion, hematocrit, rectal temperature, and left kidney histology were evaluated in four moments: M1 control, and M2, M3, M4 obtained immediately, 15 and 30 min after unclamping of the left renal artery. In G2, M1, M2, M3 and M4 were obtained 45, 90, 105, and 120 min after the second allopurinol dose. Results - Both groups showed the highest values for PAH(c), RBF, and Cr(c), and the lowest values for RVR in M1. Animals were tachycardiac since the beginning of the experiment both in G1 and in G2. The other parameters were not changed. Left kidney histological evaluation showed alterations compatible with acute tubular necrosis in both experimental groups. Conclusions - Alterations found in renal hemodynamics were compatible with the release of vasoconstrictor substances due to renal ischemia. Allopurinol was not effective in preventing renal alterations caused by ischemia and reperfusion.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Background and Objectives - It is essential to reduce health care costs without impairing the quality of care. Propofol is associated to faster recovery and it is known that post-anesthesia care unit (PACU) costs are high. The aim of this study was to evaluate the advantages of two anesthesia regimens - propofol continuous infusion or isoflurane - taking into account the cost of both techniques on PACU stay. Methods - Forty seven patients, physical status ASA I, II and III, undergoing laparoscopic cholecystectomy were divided into 2 groups according to the anesthetic agent: G1, conventional propofol continuous infusion (100-150 μg.kg-1.min-1) and G2, isoflurane. All patients were induced with sufentanil (1 μg.kg-1) and propofol (2 mg.kg-1) and were kept in a re-inhalation circuit (2 L.min-1 of fresh gas flow) with 50% N2O in O2, sufentanil (0.01 μg.kg-1.min-1) and atracurium (0.5 mg.kg-1), or pancuronium (0.1 mg.kg-1) for asthma patients. All patients received atropine and neostigmine at the end of the surgery. Prophylactic ondansetron, dipyrone and tenoxican were administered and, when necessary, tramadol and N-butylscopolamine. Costs of anesthetic drugs (COST), total PACU stay (t-PACU), and PACU stay after extubation (t-EXT) were computed for both groups. Results - Costs were significantly lower in the isoflurane group but t-PACU was 26 minutes longer and t-EXT G1

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The susceptibility of the tick Boophilus microplus to Beauveria bassiana was evaluated by inoculating eggs, larvae and engorged females of the tick with five fungal isolates at concentrations of 106, 107 and 108 conidia/ml. Tick eggs (0.25 g) were immersed in 1 ml of a suspension of the different conidial concentrations for 1 min. Similar exposure was performed by immersion of 2000 larvae and homogeneous groups of nine engorged females in 2 and 20 ml of conidial suspension, respectively. Treated eggs, larvae and adults were placed in an incubator at 27 ± 1 °C and relative humidity above 80% for evaluation of the fungal action. All fungal isolates applied at all conidial concentrations reduced the hatching rate of larvae from treated eggs by 1.36-65.58% and increased the mortality rate of inoculated larvae by 0.8-70.49%. In the bioassay with engorged females, oviposition period was reduced by 9.69-47.80%, egg mass weight by 4.71-53.87%, estimated reproduction by 8.3-60.62%, egg production index by 5.03-54.20%, percent larval hatching by 0.27-13.96%, and the mortality rate of treated females was increased by 96.60-100%. The reduction of the estimated reproduction obtained for the treated groups ranged from 8.37 to 64.52%. The sporulation of the pathogen on dead females ranged from 3.70 to 88.88% depending on the isolate and concentration used. Isolates AM 09, CB 7 and JAB 07 were the most effective and effectiveness increased with increasing concentrations of conidia in the suspensions.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Purpose: To evaluate the effects of removing dentin collagen exposed by acid etching on the microleakage of bonded restorations with and without flowable composite application and submitted to thermocycling and long-term water storage. Materials and Methods: Standardized Class V cavities were prepared in 180 bovine incisors. They were randomly assigned to three groups according to the adhesive technique used. Conventional group (C): Single Bond was applied according to the manufacturer's instructions and Z250 composite was placed. Hypochlorite group (H): After acid etching a 10% NaOCl aqueous solution was applied for 1 min, then Single Bond and Z250 were applied. Hypochlorite and Flowable group (HF): Similar to group H, but following adhesive application, a thin layer of Natural Flow flowable composite was applied before the Z250. Each group was divided into three subgroups (0, 6, 12), which remained immersed in distilled water for 24 h or 6 or 12 months and underwent 500, 1500 or 2500 thermal cycles, respectively. At the end of each storage time, the specimes were stained with silver nitrate, decalcified, immersed in methyl salicylate for clearing and observed under a stereomicroscope to determine microleakage (scores 0 to 4). The data were analyzed using the Kruskal-Wallis and the Multiple Comparison Tests (α = 0.05). Results: After 12 months, every group showed significant increases in microleakage. There was no significant difference between Groups H and HF for the three different periods of time, but they showed statistically less microleakage than Group C. Conclusion: The removal of dentinal collagen reduced the marginal microleakage when compared to the conventional technique. The use of the flowable composite did not produce significant effects. No technique was completely effective in preventing microleakage.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Purpose: The objective of this study was to test the following hypothesis: the silica coating on ceramic surface increases the bond strength of resin cement to a ceramic. Materials and Methods: In-Ceram Alumina blocks were made and the ceramic surface was treated: G1 - sandblasting with 110-μm aluminum oxide particles; G2 - Rocatec System: tribochemicai silica coating (Rocatec-Pre powder + Rocatec-Plus powder + Rocatec-Sil); G3 - CoJet System: silica coating (CoJet-Sand) + ESPE-Sil. The ceramic blocks were cemented to composite blocks with Panavia F resin cement (under a load of 750 g/1 min). The cemented blocks were stored in distilled water at 37°C for 7 days and sectioned along the x and y axes with a diamond disk. Samples with an adhesive area of ca 0.8 mm 2 (n = 45) were obtained. The samples were attached to an adapted device for the microtensile test, which was performed in a universal testing machine (EMIC) at a crosshead speed of 1 mm/min. Results: The obtained results were submitted to ANOVA and Tukey's test. Mean values of tensile strength (MPa) and standard deviation values were: (G1) 16.8 ± 3.2; (G2) 30.6 ± 4.5; (G3) 33.0 ± 5.0. G2 and 63 presented greater tensile strength than G1. There was no significant difference between G2 and G3. All the failures took place at the ceramic/resin cement interface. Conclusion: The silica coating (Rocatec or CoJet systems) of the ceramic surface increased the bond strength between the Panavia F resin cement and alumina-based ceramic.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Purpose: The objective of this study was to verify the effect of cyclic compressive loading on the shear bond strength of an adhesive system following collagen removal. Materials and Methods: Sixty bovine teeth were divided into 4 groups based on the adhesive procedure used: groups 1 and 2 - etching with 35% phosphoric acid and application of the Single Bond adhesive system; groups 3 and 4 - after etching, a 10% sodium hypochlorite solution was applied for 1 min before the application of the adhesive. In all the specimens, a Z100 resin cylinder was built up over the bond area. Groups 2 and 4 were submitted to 500,000 cycles with a load of 100 N. Results: The mean values for the shear bond test (MPa) were: group 1: 7.37 ± 1.15; group 2: 5.72 ± 1.66; group 3: 5.95 ± 1.21; group 4: 3.66 ± 1.12. There was no difference between groups 1 and 2 (p > 0.01). Between groups 1 and 3, 2 and 4, and 3 and 4 there was a significant difference (p < 0.01). The majority of the specimens demonstrated an adhesive failure. Conclusion: The application of sodium hypochlorite on dentin decreased the values of shear bond strength, as did the load cycling in the group treated with sodium hypochlorite.