769 resultados para 070302 Agronomy
Resumo:
Four of the 12 major Glycine max ancestors of all modern elite U.S.A. soybean cultivars were the grandparents of Harosoy and Clark, so a Harosoy x Clark population would include some of that genetic diversity. A mating of eight Harosoy and eight Clark plants generated eight F1 plants. The eight F1:2 families were advanced via a plant-to-row selfing method to produce 300 F6-derived RILs that were genotyped with 266 SSR, 481 SNP, and 4 classical markers. SNPs were genotyped with the Illumina 1536-SNP assay. Three linkage maps, SSR, SNP, and SSR-SNP, were constructed with a genotyping error of < 1 %. Each map was compared with the published soybean consensus map. The best subset of 94 RILs for a high-resolution framework (joint) map was selected based on the expected bin length statistic computed with MapPop. The QTLs of seven traits measured in a 2-year replicated performance trial of the 300 RILs were identified using composite interval mapping (CIM) and multiple-interval mapping (MIM). QTL x Year effects in multiple trait analysis were compared with results of multiple-interval mapping. QTL x QTL effects were identified in MIM.
Resumo:
Maize demand for food, livestock feed, and biofuel is expected to increase substantially. The Western U.S. Corn Belt accounts for 23% of U.S. maize production, and irrigated maize accounts for 43 and 58% of maize land area and total production, respectively, in this region. The most sensitive parameters (yield potential [YP], water-limited yield potential [YP-W], yield gap between actual yield and YP, and resource-use efficiency) governing performance of maize systems in the region are lacking. A simulation model was used to quantify YP under irrigated and rainfed conditions based on weather data, soil properties, and crop management at 18 locations. In a separate study, 5-year soil water data measured in central Nebraska were used to analyze soil water recharge during the non-growing season because soil water content at sowing is a critical component of water supply available for summer crops. On-farm data, including yield, irrigation, and nitrogen (N) rate for 777 field-years, was used to quantify size of yield gaps and evaluate resource-use efficiency. Simulated average YP and YP-W were 14.4 and 8.3 Mg ha-1, respectively. Geospatial variation of YP was associated with solar radiation and temperature during post-anthesis phase while variation in water-limited yield was linked to the longitudinal variation in seasonal rainfall and evaporative demand. Analysis of soil water recharge indicates that 80% of variation in soil water content at sowing can be explained by precipitation during non-growing season and residual soil water at end of previous growing season. A linear relationship between YP-W and water supply (slope: 19.3 kg ha-1 mm-1; x-intercept: 100 mm) can be used as a benchmark to diagnose and improve farmer’s water productivity (WP; kg grain per unit of water supply). Evaluation of data from farmer’s fields provides proof-of-concept and helps identify management constraints to high levels of productivity and resource-use efficiency. On average, actual yields of irrigated maize systems were 11% below YP. WP and N-fertilizer use efficiency (NUE) were high despite application of large amounts of irrigation water and N fertilizer (14 kg grain mm-1 water supply and 71 kg grain kg-1 N fertilizer). While there is limited scope for substantial increases in actual average yields, WP and NUE can be further increased by: (1) switching surface to pivot systems, (2) using conservation instead of conventional tillage systems in soybean-maize rotations, (3) implementation of irrigation schedules based on crop water requirements, and (4) better N fertilizer management.
Resumo:
Sweet sorghum, a botanical variety of sorghum is a potential source of bioenergy because high sugar levels accumulate in its stalks. The objectives of this study were to explore the global diversity of sweet sorghum germplasm, and map the genomic regions that are associated with bioenergy traits. In assessing diversity, 142 sweet sorghum accessions were evaluated with three marker types (SSR, SRAP, and morphological markers) to determine the degree of relatedness among the accessions. The traits measured (anthesis date [AD], plant height [PH], biomass yield [BY], and moisture content [MC]) were all significantly different (P<0.05) among accessions. Morphological marker clustered the accessions into five groups based on PH, MC and AD. The three traits accounted for 92.5% of the variation. There were four and five groups based on SRAP and SSR data respectively classifying accessions mainly on their origin or breeding history. The observed difference between SSR and SRAP based clusters could be attributed to the difference in marker type. SSRs amplify any region of the genome whereas SRAP amplify the open reading frames and promoter regions. Comparing the three marker-type clusters, the markers complimented each other in grouping accessions and would be valuable in assisting breeders to select appropriate lines for crossing. In evaluating QTLs that are associated with bioenergy traits, 165 recombinant inbred lines (RILs) were planted at four environments in Nebraska. A genetic linkage map constructed spanned a length of 1541.3 cM, and generated 18 linkage groups that aligned to the 10 sorghum chromosomes. Fourteen QTLs (6 for brix, 3 for BY, 2 each for AD and MC, and 1 for PH) were mapped. QTLs for the traits that were significantly correlated, colocalized in two clusters on linkage group Sbi01b. Both parents contributed beneficial alleles for most of traits measured, supporting the transgressive segregation in this population. Additional work is needed on exploiting the usefulness of chromosome 1 in breeding sorghum for bioenergy.
Resumo:
In Maize (Zea maize L.), cost of hybrid seed production is directly related to the yield and quality of seed obtained per hectare of female parent. It is also important to consider the effects that a male parent can exert on the development of hybrid seed in the female parent. This effect is known as xenia. The objectives of this study were to evaluate xenia effects on 1) yield as 80K units, 2) germination of the hybrid seed and 3) susceptibility of the hybrid seed to mechanical damage. One female inbred and four male inbred lines were selected from a parent list of hybrids. The experiment was designed to allow individual cross pollination between each male inbred and the female inbred line. For use as a control, the female inbred was allowed to self pollinate. Experiments were conducted in Illinois and Iowa during 2008 and 2009 and in Nebraska during 2009. A significant inbred effect was detected on yield as 80k (α=0.001). The selfed female and pollination with male inbred B resulted in lower yields of hybrid seed. For germination, a significant inbred effect was detected (α=0.001), but was due to lower germination percentage of seed produced on the selfed female. All hybrid combinations resulted in higher germination percentages with no significant differences among hybrids. The inbred x mechanical damage interaction was significant (P=0.04) for effects on cold saturated soil germination tests. Use of inbred B resulted in a two-percentage-point reduction in cold germination when treated with the impact simulator. In a maize seed company, the production research group provides yield estimates for production of new hybrid combinations. Results from this study indicate that using only the female inbred yield may provide inaccurate estimates. Therefore to improve yield estimation, experiments should be designed to include male inbreds. Male inbreds can also impart a negative effect to the hybrid seed on tolerance to mechanical damage, thus lowering quality and increasing seed discard. When testing for hybrid seed germination, there is no need to consider distinct hybrid combinations. Female inbreds can be grown in open-pollinated fields to avoid loss of vigor observed with selfing. Advisor: George Graef
Resumo:
Abstract Ethanol is a biofuel that has unique capabilities to mitigate global climate change by reducing greenhouse gas emissions while simultaneously supporting rural economies and decreasing the United States’ dependence on foreign oil. Currently, the state of Nebraska depends on corn ethanol, which may be unsustainable. Cellulosic ethanol is a promising alternative but it is not without its problems, including high production costs and potential environmental damage. This thesis is an attempt to understand the benefits, downfalls, and processes of corn-based and cellulosic ethanol and the potential implications to Nebraska. This research should shed some light on the current obstacles and environmental problems involved with production, as well as evaluate the potential economic benefits to Nebraska, while pointing out issues that should be further researched before implementation.
Resumo:
ABSTRACT This long term study focuses on testing various hazelnut cultivars for yield, nut quality and disease resistance. There are various cultivars that are being tested for these desired traits but only the Grand Traverse and Skinner will be applicable for the results of this localized study. The desired traits of commercial nut production are best matched by these two cultivars. Results from previous harvests will be used to draw trends to recommend commercially functional cultivars in Eastern Nebraska.
Resumo:
The use of selective applicators is being rapidly adopted by farmers to supplement their weed control programs. A low-cost method of removing tall, escaped weeds from short stature crops, selective application is also environmentally appealing since the herbicide is applied only to the target weeds and thus only small amounts of herbicides are used. There are three basic types of applicators available: ropewicks, recirculating sprayers (RCS), and carpeted rollers. This NebGuide discusses each applicator and how it can be used on the farm.
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Sugarcane-breeding programs take at least 12 years to develop new commercial cultivars. Molecular markers offer a possibility to study the genetic architecture of quantitative traits in sugarcane, and they may be used in marker-assisted selection to speed up artificial selection. Although the performance of sugarcane progenies in breeding programs are commonly evaluated across a range of locations and harvest years, many of the QTL detection methods ignore two- and three-way interactions between QTL, harvest, and location. In this work, a strategy for QTL detection in multi-harvest-location trial data, based on interval mapping and mixed models, is proposed and applied to map QTL effects on a segregating progeny from a biparental cross of pre-commercial Brazilian cultivars, evaluated at two locations and three consecutive harvest years for cane yield (tonnes per hectare), sugar yield (tonnes per hectare), fiber percent, and sucrose content. In the mixed model, we have included appropriate (co)variance structures for modeling heterogeneity and correlation of genetic effects and non-genetic residual effects. Forty-six QTLs were found: 13 QTLs for cane yield, 14 for sugar yield, 11 for fiber percent, and 8 for sucrose content. In addition, QTL by harvest, QTL by location, and QTL by harvest by location interaction effects were significant for all evaluated traits (30 QTLs showed some interaction, and 16 none). Our results contribute to a better understanding of the genetic architecture of complex traits related to biomass production and sucrose content in sugarcane.
Resumo:
Hybrids or open pollinated tomato cultivars used for sauces and ketchups production usually has determinate growth habit, while most of the genotypes used in the production to salads (in natura consumption) has indeterminate growth habit. Additionally, growth habit can have influence on culture management, productivity and total soluble solids (TSS) in fruits. The growth habit is mainly controlled by the gene SELF-PRUNING (SP), which is a component of a small gene family which is also part of the gene SINGLE FLOWER TRUSS (SFT), currently considered one of the components so sought after 'florigin'. Understanding the biochemical function and physiological effect of such genes in interaction with the environment and other genes (epistasis), allows the manipulation of parameters such as precocity and TSS. It also provides subsidies to understand the genetic basis of semideterminate growth, which combines the advantages of determinate and indeterminate habit and can be used for plant breeders to development of new cultivars.
Resumo:
The use of organic trace minerals is getting strength and is an alternative to increase production and improve other characteristics such as humoral immunity. The present study was conducted to evaluate the effect of different levels and sources of selenium (Se) on humoral immunity of broilers. A six-week research was conducted using 1440 one-day-old males broiler chickens. The experimental design was randomized with six experimental diets (A: 0.15mg kg(-1) inorganic (inorg.); B: 0.15mg kg(-1) organic; C: 0.15mg kg(-1) inorg. + organic; D: 0.45mg kg(-1) inorganic; E: 0.45mg kg(-1) organic; F: 0.45mg kg(-1) inorg. + organic) calculated to provide the described amount of Se. Each diet was replicated in six box with 40 birds. A 3x2 factorial arrangement was used and the data were analyzed by ANOVA. The immunity was evaluated by means of the reaction against vaccine of Newcastle disease, and a reaction against sheep red blood cells (SRBC). No significant effects were observed at 5% significance level in NewCastle antibody (P >0.05). However at 14 day-old the source factor had p value at 0.0580, that show a trend of inorganic source in prolong the maternal immunity. No effect was observed in the immune response against SRBC (P >0.05). The results showed a immunologic response against Newcastle vaccine and SRBC, but the treatments was not able to induce a significant difference. The source and the level of Se showed no effect on the response against Newcastle vaccine and SRBC.
Resumo:
This paper presents a study on the potential use of coconut fiber as material to produce particleboards, with two different densities (0.8 g/cm(3) and 1.0 g/cm3), using castor oil-based polyurethane adhesive and urea-formaldehyde. The quality of the product that can be produced by industry was evaluated according to the normative NBR 14.810:2006, where density, thickness swell (TS), absorption, modulus of elasticity (MOE), modulus of rupture (MOR) in static bending and internal bond (IB) were determined. From the results, there was a decrease in TS and increase in MOR of coconut fiber panels with polyurethane resin panels compared with coconut fiber and resin urea-formaldehyde. Scanning microscopy electronic images (SEM) indicated that castor oil-based polyurethane adhesive occupies the gaps between the particles, a factor that contributes to improved physical and mechanical properties of the panels. The assessment of durability through accelerated aging tests shows that panels protected with waterproofing material can be used in environments that have contact with moisture. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Este trabalho teve como objetivos isolar bacteriófagos de amostras de leite, soro e queijo de Coalho e avaliar a resistência de cepas de Lactobacillus paracasei, pertencentes à Coleção de Micro-organismos de Interesse para a Agroindústria Tropical da Embrapa Agroindústria Tropical, aos fagos isolados. Posteriormente, a resistência destas cepas a fagos específicos para L. paracasei, da Coleção do Instituto de Lactología Industrial - INLAIN (Santa Fe, Argentina), também foi avaliada. As amostras para isolamento dos fagos foram obtidas em quatro unidades de processamento de queijo de Coalho, sendo duas artesanais e duas industriais, localizadas no Estado do Ceará. Para o isolamento dos bacteriófagos, foi empregado o teste de lise celular (spot), enquanto que a resistência das culturas aos fagos foi avaliada pelos testes de capacidade de produção de ácido e avaliação da turbidez. As cepas avaliadas foram resistentes aos bacteriófagos provenientes das unidades de processamento de queijo de Coalho e aos bacteriófagos da Coleção do INLAIN. Os resultados obtidos indicaram que as culturas láticas testadas, resistentes aos bacteriófagos, podem ser utilizadas na composição de fermento lático destinado à elaboração de queijo de Coalho, a partir de leite pasteurizado.
Resumo:
The quality of plastic films used for horizontal silos is important to limit losses in the upper silage layer. The aim of this work was to study the effectiveness of different plastic films in reducing the top losses in maize silage. The following treatments were evaluated: (i) coextruded polyethylene/polyamide oxygen barrier film (OB), (ii) polyethylene film (PE), (iii) polyvinyl chloride film (PVC), and (iv) coextruded PE/polyvinyl alcohol film (PVOH). These treatments differed according to oxygen permeability with values of 75, 722, 982 and 289 cm(3) m(-2) per 24 hour respectively. OB and PVOH films had better temperature and fermentation profiles than the more permeable films. The OB film was effective in reducing the dry-matter (DM) losses during storage (82 g kg(-1)), and the PVOH film had an intermediate value of DM loss (101 g kg(-1)). PE and PVC films had higher losses (138 and 145 g kg(-1) respectively). Oxygen permeability of the films promoted a positive correlation with DM losses (P < 0.05; r2 = 0.945). The results indicate that O2 permeability through the plastic film is a crucial factor for maintaining silage quality in the upper layer of the silo when it is perfectly sealed.
Resumo:
The effects of foliar and soil applied phosphite on grain yield in common bean (Phaseolus vulgaris L.) grown in a weathered soil under low and adequate phosphate availability were evaluated. In the first experiment, treatments were composed of a 2 x 7 + 2 factorial scheme, with 2 soil P levels supplied as phosphate (40 e 200 mg P dm(-3) soil), 7 soil P levels supplied as phosphite (0-100 mg P dm(-3) soil), and 2 additional treatments (without P supply in soil, and all P supplied as phosphite). In the second experiment, treatments were composed of a 2 x 3 x 2 factorial scheme, with 2 soil phosphate levels (40 e 200 mg P dm(-3) soil), combined with 3 nutrient sources applied via foliar sprays (potassium phosphite, potassium phosphate, and potassium chloride as a control), and 2 foliar application numbers (single and two application). Additional treatments showed that phosphite is not P source for common bean nutrition. Phosphite supply in soil increased the P content in shoot (at full physiological maturity stage) and grains, but at the same time considerably decreased grain yield, regardless of the soil phosphate availability. Foliar sprays of phosphite decreased grain yield in plants grown under low soil phosphate availability, but no effect was observed in plants grown under adequate soil phosphate availability. In general, foliar sprays of phosphate did not satisfactorily improve grain yield of the common bean plants grown under low soil phosphate availability.