904 resultados para yield curve


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study deals with the length increment data of 15 adult Labeo rohita (Ham.) over a period of five months by the applicatin of finite difference method at an altitude of 1496 m above mean sea level at Shilllong, Meghalaya.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The modeling of the soil plasticity was discussed and it was shown that the grain breakage is an important factor of the plastic soil behaviour. A reduction of internal coefficient of friction was observed when stress-level was increased. The yield paths of all stress path tests determined by curve fitting were presented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Preliminary estimates of growth parameters and mortality are presented for the deep-water spiny lobster Palinurus delagoae fished off Mozambique. The length-converted catch curve shows three levels of total mortality (year-1): Z=2.9 for the smaller sizes; Z=1.4 for intermediate, and Z=0.6 for the larger lobsters. These results are confirmed by a length-structured virtual population analysis. Yield-per-recruit analysis suggests that a long-term yield, at least 50% higher than the present one, could be obtained by increasing the mean size at first capture from about 6 cm (carapace length) to about 10 cm.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Analysis of the length-frequency data on Copadichromis likomae (Cichlidae) from Lake Niassa, Mozambique, suggests an asymptotic length of SL∞=14 cm associated with a K value of 0.93 yearˉ¹. Total and natural mortalities were estimated as 3.2 yearˉ¹ and 1.9 yearˉ¹, respectively. Yield-per-recruit analysis suggests that E=0.36 in this fishery.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

(GIFT) (Oreochromis niloticus) and Silver barb (Barbodes gonionotus) in rice fields and their effects on the yield of rice was carried out in nine experimental rice plots. Three treatments viz., treatment-1 with 0. niloticus (T1), treatment-2 with B. gonionotus (T2) and treatment- 3 was kept as control (T3, without fish) were used in this study. Fertilizers such as, Urea (178 kg ha-1), T.S.P (125 kg ha-1) and M.P. (67 kg ha-1) were applied in each treatment. The fishes were stocked @ 6250 ha·1 and the experiment was continued for a period of 107 days. The values of water quality parameters such as, water temperature, dissolved oxygen, pH and chlorophyll-a were found within suitable level. Between the two species, higher specific growth rate was recorded in 0. niloticus than that of B. gonionotus. But B. gonionotus showed much higher survival (72%) than that of 0. niloticus (35%). Similar to survival, higher production (244 kg ha-1) and income (Tk. 6399 ha-1) were recorded in B. gonionotus than those of 0. niloticus (142.8 kg ha'1 and Tk. 2137 ha-1). Significant differences (pyield of rice grain and straw were observed between the treatments with fish and without fish.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Effect of water depth on recovery rate, growth performance and fish yield of GIFT in the rice-fish production systems was studies in experimental plots of 123 m2 with a pond refuge of I meter deep which covered 10% of the total land area. Mortality rate of fish was very low ranging from 0.81-1.63%. However, at harvest, recovery rate ranged from 76.69-82.93% with the highest recovery at 11-15 em of water depth. Significantly the highest absolute growth (99.97) and specific growth rate (2.42%) were found at 21-25 cm water depth. The same treatment also produced significantly higher fish yield (909.76 kg/ha) although statistically similar to the fish yield (862.60 kg/ha) obtained at ll-15 em of water depth. Results also suggested that higher water depth can produce bigger fish but no significant effects of water depth was found on fish yield in the treatments 11-15 cm and 21-25 cm water depths of this experiment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The paper deals with the average yield of four spp of prawns viz. Metapenaeus dobsoni, Metapenaeus affinis, Parapenaeopsis stylifera and Penaeus indicus on conversion to peeled and deveined (PD), cooked and peeled (CP) and head less shell on (HL) forms in the different months of a year and the likely variations observed in the average yield.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Observations (76 nos) on height-length and whole weight-meat weight relations of mussels (Perna viridis), both wild and cultured were made. From the length of mussel the height can be worked out by the equations (logarithmic scale), 1. y = 0.360+0.988 x for wild; 2. y = 0.334+1.011 x for cultured, where x is the length (cm) and y is the height (cms). So also to any height the corresponding meat weight can be obtained by the regression equation. log w=-0.8178+1.9769 log H for wild variety (1) log w=-1.3049+2.8385 log H for culture-variety (2) where w is the meat weight (g) and H is the height (cm) of the mussel. Fourteen observations on size weight measurements of dams were made. The yield varied from 8.9 to 13%. The length-height relationship worked out for clams (Villorita sp) is y=0.485+1.005 x for length x and height y.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sixty one observations on length-breadth and whole weight-meat weight relations of India crab (Scylla serrata) were made. From the length of crab (cm) the whole weight (gm) can be computed by the equation: log W=-0.1708+2.3341 log L. Similarly for any given length (cm) the meat weight (gm) can be found by the relation, log w=-1.5745+3.0148 log L.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The findings are presented of a study conducted to determine a method for the calculation of the yield of dried air bladders of eel from the weight of the whole fish.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The study was conducted at the Central Experimental Station, Philippine Rice Research Institute, Maligaya, Science City of Munoz, Nueva Ecija, Philippines during the wet season to determine the suitable stocking density(s) for better growth and yield of fish under rice-fish production systems. Recovery rate of GIFT tilapia in different stocking densities ranged from 75.74 to 83.47%. Among different treatments, rice +5,000 fingerlings/ha and rice +10,000 fingerlings/ha resulted in the highest recovery rate of 83.33% and 83.47%, respectively. The lowest recovery rate of 75.75% was obtained from rice +20,000 fingerlings/ha, but similar to that was obtained (78.56%) from rice +15,000 fingerlings/ha. Significantly higher rate of gain in body weight and that of specific growth rate were recorded in the treatment from rice +5,000 fingerlings/ha, while other treatments resulted in similar absolute and specific growth rate. Fish yield increased significantly with relatively higher stocking densities, but higher densities produced maximum number of smaller fishes and also lower recovery rate.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Limnological factors of a sub-tropical lake Manchar were studied on seasonal basis. The mean values of various parameters were: transparency, (secchi disc reading): 90.5 cm, Orthophosphate: 0.257 mg/l, TDS: 3310,5 mg/l, Conductivity: 5232 µs/l, Total Chlorophyll (Planktonic): 31.3 µg/l Planktonic biomass: 5466 µg/l. Trophic state index (TSI) was calculated by using Carlson's (1977) equations. Mean TSI for transparency was 61, while for orthophosphate and chlorophyll, it was 82 and 64 respectively. TSI values indicate advanced eutrophic state of Manchar Lake. Morphoedaphic index (MEI) was also calculated on seasonal basis. The mean values were, TDS: 1103, conductivity: 1744, alkalinity: 60, transparency: 29 and biomass (plankton dry weight): 1746. Fish yield prediction for Manchar Lake (Z =3m, mean area=100 km²) was calculated by using MEI values. The results were quite different among various parameters. Conductivity (89.1mt/y), biomass (67.6 mt/y) and TDS (44.6 mt/y) were found to be good predictors of fish yield. Chlorophyll, transparency and alkalinity values gave very low estimate.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An experiment was conducted with five treatments i.e. rice combined with fish having regular urea fertilization (T1), rice combined with prawn having regular urea fertilization (T2), rice combined with fish with supplementary feeding (T3), rice combined with prawn with supplementary feeding (T4) and without fish and prawn (T5) was kept as control. The dissolved oxygen values obtained in treatments with fish both in morning and afternoon were lower than the values of prawn containing treatments and control. The values of nitrate-N, ammonia-N, phosphate-P and chlorophyll-a were higher in fish containing treatments than the prawn containing treatments and control. Between the two fish containing treatments the higher gross (539.44 kg/ha) and net (440.14 kg/ha) yield were obtained in T3 with supplementary feeding and the lower gross (424.88 kg/ha) and net (314.32 kg/ha) yield were recorded in T1 without supplementary feeding. Again, between two prawn containing treatments the higher gross (108.69 kg/ha) and net (81.92 kg/ha) yield were obtained in T4 with supplementary feeding and lower gross (64.32 kg/ha) and net (30.98 kg/ha) yield were recorded in T2 without supplementary feeding. The highest yield of rice grain (3.45 mt/ha) and straw (6.37 mt/ha) were obtained in T1 with fish having urea fertilization without feeding.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Populations of kilka in the Caspian Sea have important role in the food chain. This study was conducted to determine population parameters of three species of kilka in the south of the Caspian Sea, during 2006-2007. Mean length was 102.4±9.7 mm for common kilka, 117.8±6.9 mm for anchovy and 119.5±10.9 mm for bigeye. The relationship between length and weight indicated the negative allometric growth in the all three species. Mean age for common kilka, anchovy and bigeye were 3.6, 4.6 and 4.6 years, respectively. Sex ratio (M:F) were 0.52:1 for anchovy, 0.60:1 for common kilka and 1.60:1 for bigeye. The value of growth coefficient (K) was the highest (0.321) for the common kilka, (0.267) for the bigeye, and the lowest for the anchovy kilka (0.245). Total mortality estimated from the descending of the catch curve using the age structure, Z=1.280 yr-1 for common kilka, Z=1.067 yr-1 for anchovy, and Z=1.015 yr-1 for bigeye. Natural mortality (M) were estimated using Pauly formula as M=0.622, M=0.537 and M=0.503 per year for common kilka, bigeye and anchovy, respectively. Value of fishing mortality (F) were estimated from Z and M, as F=0.658 for common kilka, F=0.564 for anchovy and F=0.478 for bigeye. The exploitation rate (E) were estimated E=0.514 for common kilka, E=0.528 for anchovy and E= 0.471 for bigeye. The estimate of MCY (Maximum Constant Yield) was calculated using the more reliable time series of commercial catch data from 2001-2007, which resulted in an estimate of MCY for the kilka fishery of 14100 tonnes.