Family violence: Walking the tight rope between maternal alienation and child safety

Mothers are often alienated from their children when child abuse is suspected or confirmed, whether she is the primary abuser of the child or not. An abusive or violent partner often initiates the process of maternal alienation from children as a control mechanism. When the co-occurrence of maternal and child abuse is not recognised, nurses and health professionals risk further alienating a mother from her children, which can have detrimental effects in both the short and long term. Evidence shows that when mothers are supported and have the necessary resources there is a reduction in the violence and abuse she and her children experience; this occurs even in situations where the mother is the primary abuser of her children. The family-centred care philosophy, which is widely accepted as the best approach to nursing care for children and their families, creates tension for nurses caring for children who are the victims of abuse as this care generally occurs away from the context of the family. This fragmented approach to caring for abused children can inadvertently undermine the mother-child relationship and further contribute to maternal alienation. This paper discusses the complexity of family violence for nurses negotiating the 'tight rope' between the prime concern for the safety of children and further contributing to maternal alienation, within a New Zealand context. The premise that restoration of the mother-child relationship is paramount for the long-term wellbeing of both the children and the mother provides the basis for discussing implications for nursing practice.

Congruence in QTL for adventitious rooting in Pinus elliottii X Pinus caribaea hybrids resolves between and within-species effects

Targeting between-species effects for improvement in synthetic hybrid populations derived from outcrossing parental tree species may be one way to increase the efficacy and predictability of hybrid breeding. We present a comparative analysis of the quantitative trait loci (QTL) which resolved between from within-species effects for adventitious rooting in two populations of hybrids between Pinus elliottii and P. caribaea, an outbred F-1 (n=287) and an inbred-like F-2 family (n=357). Most small to moderate effect QTL (each explaining 2-5% of phenotypic variation, PV) were congruent (3 out of 4 QTL in each family) and therefore considered within-species effects as they segregated in both families. A single large effect QTL (40% PV) was detected uniquely in the F-2 family and assumed to be due to a between-species effect, resulting from a genetic locus with contrasting alleles in each parental species. Oligogenic as opposed to polygenic architecture was supported in both families (60% and 20% PV explained by 4 QTL in the F-2 and F-1 respectively). The importance of adventitious rooting for adaptation to survive water-logged environments was thought in part to explain oligogenic architecture of what is believed to be a complex trait controlled by many hundreds of genes.

The 2.1 angstrom crystal structure of copGFP, a representative member of the copepod clade within the green fluorescent protein superfamily

The green fluorescent protein (avGFP), its variants, and the closely related GFP-like proteins are characterized structurally by a cyclic tri-peptide chromophore located centrally within a conserved beta-can fold. Traditionally, these GFP family members have been isolated from the Cnidaria although recently, distantly related GFP-like proteins from the Bilateria, a sister group of the Cnidaria have been described, although no representative structure from this phylum has been reported to date. We have determined to 2.1 angstrom resolution the crystal structure of copGFP, a representative GFP-like protein from a copepod, a member of the Bilateria. The structure of copGFP revealed that, despite sharing only 19% sequence identity with GFP, the tri-peptide chromophore (Gly57-Tyr58-Gly59) of copGFP adopted a cis coplanar conformation within the conserved beta-can fold. However, the immediate environment surrounding the chromophore of copGFP was markedly atypical when compared to other members of the GFP-superfamily, with a large network of bulky residues observed to surround the chromophore. Arg87 and Glu222 (GFP numbering 96 and 222), the only two residues conserved between copGFP, GFP and GFP-like proteins are involved in autocatalytic genesis of the chromophore. Accordingly, the copGFP structure provides an alternative platform for the development of a new suite of fluorescent protein tools. Moreover, the structure suggests that the autocatalytic genesis of the chromophore is remarkably tolerant to a high degree of sequence and structural variation within the beta-can fold of the GFP superfamily. (c) 2006 Elsevier Ltd . All rights reserved.

The identification and characterisation of alleles of sucrose phosphate synthase gene family III in sugarcane

Little is known about the extent of allelic diversity of genes in the complex polyploid, sugarcane. Using sucrose phosphate synthase (SPS) Gene (SPS) Family III as an example, we have amplified and sequenced a 400 nt region from this gene from two sugarcane lines that are parents of a mapping population. Ten single nucleotide polymorphisms (SNPs) were identified within the 400 nt region of which seven were present in both lines. In the elite commercial cultivar Q165(A), 10 sequence haplotypes were identified, with four haplotypes recovered at 9% or greater frequency. Based on SNP presence, two clusters of haplotypes were observed. In IJ76-514, a Saccharum officinarum accession, 8 haplotypes were identified with 4 haplotypes recovered at 13% or greater frequency. Again, two clusters of haplotypes were observed. The results suggest that there may be two SPS Gene Family III genes per genome in sugarcane, each with different numbers of different alleles. This suggestion is supported by sequencing results in an elite parental sorghum line, 403463-2-1, in which 4 haplotypes, corresponding to two broad types, were also identified. Primers were designed to the sugarcane SNPs and screened over bulked DNA from high and low Sucrose-containing progeny from a cross between Q165(A) and IJ76-514. The SNP frequency did not vary in the two bulked DNA samples, suggesting that these SNPs from this SPS gene family are not associated with variation in sucrose content. Using an ecotilling approach, two of the SPS Gene Family III haplotypes were mapped to two different linkage groups in homology group 1 in Q165(A). Both haplotypes mapped near QTLs for increased sucrose content but were not themselves associated with any sugar-related trait.

Global perspectives in Korean intercountry adoption

Policy and social work practice currently lack a theoretical framework that adequately explains the emergence, diffusion, and continuance of the intercountry adoption (ICA) phenomenon. Using South Korea as a case study and the application of actor network theory to the ICA phenomenon, this paper introduces a theoretical approach that allows an examination of the complex interrelationships between the global and local influences of a country's engagement in ICA. This theoretical approach provides a different way of understanding the phenomenon, which, in turn, can better inform policies and practice that affect children and families across the globe.

Towards an understanding of creativity and innovation within professional services and marketing

Greatly increased competition in the professional services and marketing sectors has reinforced the need for firms to develop an organisational culture that facilitates adaptation to changing conditions and competitive threats. More generally, competitive changes within business environments require new and creative ways of organising and managing firms. In order for marketing practitioners to be ahead of competitors in identifying and meeting customer needs, creative thought is essential. An organisational culture that supports creativity and facilitates the adoption of innovative practices, products and services, improves a firm’s ability to remain competitive within an uncertain environment. This paper presents a conceptual model of an organisational culture supporting creativity and innovation. The model posits relationships between creativity and innovation and organisational performance. The main contribution of the paper is to build a foundation for future research directed primarily towards exploring the relationships in the theoretical model of interest. Implications for marketing practitioners are also considered.

A key role for transmembrane prolines in calcitonin receptor-like receptor agonist binding and signalling:implications for family B G-protein-coupled receptors

Calcitonin receptor like-receptor is a family B G-protein coupled receptor (GPCR). It requires receptor activity modifying protein (RAMP) 1 to give a calcitonin gene-related peptide (CGRP) receptor. Little is known of how members of this receptor family function. Proline residues often form important kinks in alpha-helices. Therefore, all proline residues within the transmembrane helices of the receptor (Pro241, Pro244 in helix 4, Pro275 in helix 5, Pro321 and Pro331 in helix 6) were mutated to alanine. Pro241 Pro275, and Pro321 are highly conserved throughout all family B GPCRs. The binding of CGRP and its ability to stimulate cAMP production were investigated in mutant and wild-type receptors after transient transfection into COS-7 cells with RAMP1. The P321A mutation significantly decreased the pEC(50) for CGRP and reduced its affinity but did not change cell-surface expression. Antagonist binding [CGRP(8-37) and 1-piperidinecarboxamide N-[2-[[5amino-1-[[4-(4-pyridinyl)-1-piperazinyl]carbonyl]pentyl]amino]-1-[(3 5-dibromo-4-hydroxyphenyl)methyl]-2-oxoethyl]-4-(1,4-dihydro-2-oxo-3(2H)-quina zolinyl) (BIBN4096BS)] was little altered by the mutation. Adrenomedullin-mediated signaling was disrupted when P321A was coexpressed with RAMP1, RAMP2, or RAMP3. The P331A mutant produced a moderate reduction in CGRP binding and receptor activation. Mutation of the other residues had no effect on receptor function. Thus, Pro321 and Pro331 are required for agonist binding and receptor activation. Modeling suggested that Pro321 induces a bend in helix 6, bringing its C terminus near that of helix 3, as seen in many family A GPCRs. This is abolished in P321A. P321A-I325P predicted to restore this conformation, showed wild-type activation. Modeling can also rationalize the effects of transmembrane proline mutants previously reported for another family B GPCR, the VPAC(1) receptor.

Functional and biophysical analysis of the C-terminus of the CGRP-receptor; a family B GPCR

G-protein coupled receptors (GPCRs) typically have a functionally important C-terminus which, in the largest subfamily (family A), includes a membrane-parallel eighth helix. Mutations of this region are associated with several diseases. There are few C-terminal studies on the family B GPCRs and no data supporting the existence of a similar eighth helix in this second major subfamily, which has little or no sequence homology to family A GPCRs. Here we show that the C-terminus of a family B GPCR (CLR) has a disparate region from N400 to C436 required for CGRP-mediated internalization, and a proximal region of twelve residues (from G388 to W399), in a similar position to the family A eighth helix, required for receptor localization at the cell surface. A combination of circular and linear dichroism, fluorescence and modified waterLOGSY NMR spectroscopy (SALMON) demonstrated that a peptide mimetic of this domain readily forms a membrane-parallel helix anchored to the liposome by an interfacial tryptophan residue. The study reveals two key functions held within the C-terminus of a family B GPCR and presents support for an eighth helical region with striking topological similarity to the nonhomologous family A receptor. This helix structure appears to be found in most other family B GPCRs.

Structural properties of a family of hydrogen-bonded co-crystals formed between gemfibrozil and hydroxy derivatives of t-butylamine, determined directly from powder X-ray diffraction data

We report the formation and structural properties of co-crystals containing gemfibrozil and hydroxy derivatives of t-butylamine H2NC(CH3)3-n(CH2OH)n, with n=0, 1, 2 and 3. In each case, a 1:1 co-crystal is formed, with transfer of a proton from the carboxylic acid group of gemfibrozil to the amino group of the t-butylamine derivative. All of the co-crystal materials prepared are polycrystalline powders, and do not contain single crystals of suitable size and/or quality for single crystal X-ray diffraction studies. Structure determination of these materials has been carried out directly from powder X-ray diffraction data, using the direct-space Genetic Algorithm technique for structure solution followed by Rietveld refinement. The structural chemistry of this series of co-crystal materials reveals well-defined structural trends within the first three members of the family (n=0, 1, 2), but significantly contrasting structural properties for the member with n=3. © 2007 Elsevier Inc. All rights reserved.

The adoption of value-based management in large UK companies:a case for diffusion theory

Purpose – In the 1990s, a growing number of companies adopted value-based management (VBM) techniques in the UK. The purpose of this paper is to explore the motivations for the adoption or non-adoption of VBM for managing a business. Design/methodology/approach – An interview-based study of 37 large UK companies. Insights from diffusion theory and institutional theory are utilised to theorise these motivations. Findings – It was found that the rate of adoption of VBM in the sample companies does follow the classical S-shape. It also suggests that the supply-side of the diffusion process, most notably the role played by consultants, was an influence on many companies. This was not, however, a sufficient condition for companies to adopt the technique. The research also finds evidence of relocation diffusion, as several adopters are influenced by new officers, for example chief executive officers and finance directors, importing VBM techniques that they have used in organizations within which they have previously worked. Research limitations/implications – It is quite a small scale study and further work would be needed to develop the findings. Practical implications – Understanding and theorising the adoption of new management techniques will help understand the management of a business. Originality/value – This research adds further evidence to the value of studying management accounting, and more specifically management accounting change, in practice. It shows the developments in the adoption of a new technique and hence how a technique becomes accepted in practice.

Diverse functional motifs within the three intracellular loops of the CGRP1 receptor

The CGRP1 receptor exists as a heterodimeric complex between a single-pass transmembrane accessory protein (RAMP1) and a family B G-protein-coupled receptor (GPCR) called the calcitonin receptor-like receptor (CLR). This study investigated the structural motifs found in the intracellular loops (ICLs) of this receptor. Molecular modeling was used to predict active and inactive conformations of each ICL. Conserved residues were altered to alanine by site-directed mutagenesis. cAMP accumulation, cell-surface expression, agonist affinity, and CGRP-stimulated receptor internalization were characterized. Within ICL1, L147 and particularly R151 were important for coupling to Gs. R151 may interact directly with the G-protein, accessing it following conformational changes involving ICL2 and ICL3. At the proximal end of ICL3, I290 and L294, probably lying on the same face of an α helix, formed a G-protein coupling motif. The largest effects on coupling were observed with I290A; additionally, it reduced CGRP affinity and impaired internalization. 1290 may interact with TM6 to stabilize the conformation of ICL3, but it could also interact directly with Gs. R314, at the distal end of ICL3, impaired G-protein coupling and to a lesser extent reduced CGRP affinity; it may stabilize the TM6-ICL3 junction by interacting with the polar headgroups of membrane phospholipids. Y215 and L214 in ICL2 are required for cell-surface expression; they form a microdomain with H216 which has the same function. This study reveals similarities between the activation of CLR and other GPCRs in the role of TM6 and ICL3 but shows that other conserved motifs differ in their function. © 2006 American Chemical Society.

Motivational state and process within the sociolinguistic context : an Anglo-French comparative study of school pupils learning foreign languages

The aim of this study was to investigate the effect of the socio-cultural environment upon the motivation school children have to learn foreign languages. Motivation was therefore considered from a sociolinguistic, rather than from a psycholinguistic perspective, giving primary importance to contextual, as opposed to personal factors. In order to examine the degree of relationship between motivational intensity and the contextual factors of parental attitudes, amount of foreign language exposure and the employment related value of foreign language learning (FLL), data obtained from school children living in two distinct sociolinguistic environments (Mulhouse, France and Walsall, England) were compared and contrasted. A structured sample drawn from pupils attending schools in Mulhouse and Walsall supplied the data base for this research. The main thrust of the study was quantitative in approach, involving the distribution of almost 1000 questionnaires to pupils in both towns. This was followed up by the use of qualitative methods, in the form of in-depth interviews with an individually matched sample of over 50 French/English pupils. The findings of the study indicate that FLL orientations, attitudes and motivation vary considerably between the two sociolinguistic environments. Levels of motivation were generally higher in the French sample than in the English one. Desire to learn foreign languages and a commitment to expend effort in order to fulfil this desire were key components of this motivation. The study also found evidence to suggest that the importance accorded to FLL by the socio-cultural context, communicated to the child through the socialisation agents of the family, the mass media and prospective employers, is of key importance in FLL motivation.

The role of the extracellular loops of the CGRP receptor, a family B GPCR

The CGRP (calcitonin gene-related peptide) receptor is a family B GPCR (G-protein-coupled receptor). It consists of a GPCR, CLR (calcitonin receptor-like receptor) and an accessory protein, RAMP1 (receptor activity-modifying protein 1). RAMP1 is needed for CGRP binding and also cell-surface expression of CLR. There have been few systematic studies of the ECLs (extracellular loops) of family B GPCRs. However, they are likely to be especially important for the interaction of the N-termini of the peptide agonists that are the natural agonists for these receptors. We have carried out alanine scans on all three ECLs of CLR, as well as their associated juxtamembrane regions. Residues within all three loops influence CGRP binding and receptor activation. Mutation of Ala203 and Ala206 on ECL1 to leucine increased the affinity of CGRP. Residues at the top of TM (transmembrane) helices 2 and 3 influenced CGRP binding and receptor activation. L351A and E357A in TM6/ECL3 reduced receptor expression and may be needed for CLR association with RAMP1. ECL2 seems especially important for CLR function; of the 16 residues so far examined in this loop, eight residues reduce the potency of CGRP at stimulating cAMP production when mutated to alanine.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

Strategic positioning of manufacturing operations within global supply chains

In global environment, a company has to make many decisions that impact upon its position in global supply chain networks such as outsourcing, offshoring, joint venture, vertical/horizontal integration, etc. All these decisions impact on the company’s strategic position, and hence on competitive space and performance. Therefore, it is important for a company to carefully manage strategic positioning by making careful decisions about the adoption of alternative manufacturing and supply chain activities. Unfortunately, there is no complete process studied in strategic positioning of manufacturing operations within global supply chain. Therefore, the work presented in this paper has investigated leading research and industrial practices to create a formal and rational decision process. An analysis of previous literature, industrial practices, and the resulting decision process are all presented in this paper.