The effect of thermochemical treatment on the fatigue properties of alloy steels

The effect of thermochemical treatment namely carburising on the fatigue behaviour of one carbon and two alloy steels has been studied in rotating and unidirectional bending. The effect of carbon profile on the unidirect¬ional bending fatigue strength of 63SA14 was assessed, and it was found that single stage carburising with a surface carbon content of 0.8% has resulted in a higher fatigue strength than other types of carbon profiles. Residual stresses and other metallurgical variables arising from different carbon profiles, were also considered. The highest compressive stresses h~e resulted from boost-diffuse-carburising. On the other hand surface decarburisation was associated with tensile residual stresses and a reduced fatigue strength. Retained austenite was found to be detrimental in unidirectional bending fatigue; however its presence in carburised 83SAIS did not seem to influence the rotating bending fatigue strength. Carbide particles in globular and/or intergranular form were detrimental to compressive residual stresses; the unidirectional bending fatigue strength is markedly lowered. The highest fatigue strength was accomplished by vacuum carburising. The absence of internal oxidation was the key factor in the increased fatigue strength; the presence of uniformly distributed fine carbide particles did not upset the superior fatigue strength of vacuum carburised pieces. The effect of mean stress on the fatigue strength of carburised 63SA14 was studied. Increasing the mean stress as would be expected resulted in a decreased fatigue strength. Carburisation showed its advantages at low mean stress, but at high mean stress it offers little advantage over the uncarburised hardened conditions. Notch effect was also studied in unidirectional bending of carburised 080MlS. The general trend showed that the fatigue strength decreases with increasing the stress concentration factor. But different carburising conditions have different effect on notch sensitivity.

Personality across working life:the longitudinal and reciprocal influences of personality on work

Summary: This paper focuses on the role of personality at different stages of people's working lives. We begin by reviewing the research in industrial, work, and organizational (IWO) psychology regarding the longitudinal and dynamic influences of personality as an independent variable at different career stages, structuring our review around a framework of people's working lives and careers over time. Next, we review recent studies in the personality and developmental psychology domain regarding the influence of changing life roles on personality. In this domain, personality also serves as a dependent variable. By blending these two domains, it becomes clear that the study of reciprocal effects of work and personality might open a new angle in IWO psychology's long-standing tradition of personality research. To this end, we outline various implications for conceptual development (e.g., trait stability) and empirical research (e.g., personality and work incongruence). Finally, we discuss some methodological and statistical considerations for research in this new research domain. In the end, our review should enrich the way that IWO psychologists understand personality at work, focusing away from its unidirectional predictivist influence on job performance toward a more complex longitudinal reciprocal interplay of personality and working life. © 2013 John Wiley & Sons, Ltd.

Analysis of foveation sequences in congenital nystagmus

Congenital nystagmus (CN) is an ocular-motor disorder that appears at birth or during the first few months of life; it is characterised by involuntary, conjugated, bilateral to and fro ocular oscillations. Pathogenesis of congenital nystagmus is still unknown. Eye movement recording allow to extract and analyse nystagmus main features such as shape, amplitude and frequency; depending on the morphology of the oscillations nystagmus can be classified in different categories (pendular, jerk, horizontal unidirectional, bidirectional). In general, CN patient show a considerable decrease of the visual acuity: image fixation on the retina is disturbed by nystagmus continuous oscillations; however, image stabilisation is still achieved during the short foveation periods in which eye velocity slows down while the target image is placed onto the fovea. Visual acuity was found to be mainly dependent on foveation periods duration, but cycle-to-cycle foveation repeatability and reduction of retinal image velocities also contribute in increasing visual acuity. This study concentrate on cycle-to-cycle image position variation onto fovea, trying to characterise the sequences of foveation positions. Eye-movement (infrared oculographic or electro oculographic) recordings, relative to different gaze positions and belonging to more than 30 CN patients, were analysed. Preliminary results suggest that sequences of foveations show a cyclic pattern with a dominant frequency (around 0.3 Hz on average) much lower than that of the nystagmus (about 3.3 Hz on average). Sequences of foveations reveals an horizontal ocular swing of more than 2 degree on average, which can explain the low visual acuity of the CN patient. Current CN therapies, pharmacological treatment or surgery of the ocular muscles, mainly aim to increase the patient's visual acuity. Hence, it is fundamental to have an objective parameter (expected visual acuity) for therapy planning. The information about sequences of foveations can improve estimation of patient visual acuity. © 2008 Springer-Verlag.

Polarization dynamics of bound state solitons in a carbon nanotubes mode locked erbium doped fiber laser

Optical solitons are important in the modern photonics. Passively mode locked erbium doped fiber lasers provide a neat platform to study soliton dynamics. Soliton interaction dynamics is important for various applications and has quite different manifestations, including e.g. such as bound state solitons [1], soliton rains [2]. Soliton interactions have been observed with different mode locking approaches such as figure-of-eight [3] and nonlinear polarization rotation [4]. Carbon nanotubes (CNT) have recently been widely applied as an efficient saturable absorber for passively mode locked fiber lasers. We have recently studied the polarization dynamics in a CNT mode locked vector soliton erbium doped fiber laser [5]. So far, the polarization dynamics of bound state solitons have yet to be investigated. In this report, we present a wide range of polarization dynamics of bound state solitons generated in a CNT mode locked erbium doped fiber laser. The fiber laser consists of ∼ 2 m highly doped erbium fiber (Liekki Er80-8/125) as the gain medium, an optical isolator to ensure unidirectional oscillation anda 980 nm laser diode is used to pump the gain through the 1550/980 nm wavelength division multiplexer. A fused 10:90 coupler is used to couple 10 % of the light out of the laser cavity and two in-line polarization controllers (NewPort) are used to control the birefringence of the cavity and polarization of the pump light respectively. The total cavity length is ∼ 7.8 m indicating a 25.7 MHz fundamental repetition rate. © 2013 IEEE.

Practical and cost-effective high-fidelity optical carrier dissemination using coherent communication techniques

We report a unidirectional frequency dissemination scheme for high-fidelity optical carriers deployable over telecommunication networks. For the first time, a 10 Gb/s Binary Phase Shift Keying (BPSK) signal from an ultra-narrow linewidth laser was transmitted through a field-installed optical fibre with round-trip length of 124 km between Cork City and town of Clonakilty, without inline optical amplification. At the receiver, using coherent communication techniques and optical injection-locking the carrier was recovered with noise suppression. The beat signal between the original carrier at the transmitter and recovered carrier at the receiver shows a linewidth of 2.8 kHz. Long term stability measurements revealed fractional instabilities (True Allan deviation) of 3.3 × 10-14 for 1 s averaging time, prior to phase noise cancellation.

High power Q-switched thulium doped fibre laser using carbon nanotube polymer composite saturable absorber

We have proposed and demonstrated a Q-switched Thulium doped bre laser (TDFL) with a ‘Yin-Yang’ all- bre cavity scheme based on a combination of nonlinear optical loop mirror (NOLM) and nonlinear ampli ed loop mirror (NALM). Unidirectional lasing operation has been achieved without any intracavity isolator. By using a carbon nanotube polymer composite based saturable absorber (SA), we demonstrated the laser output power of ~197 mW and pulse energy of 1.7 μJ. To the best of our knowledge, this is the highest output power from a nanotube polymer composite SA based Q-switched Thulium doped bre laser.

Isolator-free switchable uni- and bidirectional hybrid mode-locked erbium-doped fiber laser

An Erbium-doped fibre ring laser hybrid mode-locked with single-wall carbon nanotubes (SWNT) and nonlinear polarisation evolution (NPE) without an optical isolator has been investigated for various cavity conditions. Precise control of the state of polarisation (SOP) in the cavity ensures different losses for counter-propagating optical fields. As the result, the laser operates in quasi-unidirectional regime in both clockwise (CW) and counter-clockwise (CCW) directions with the emission strengths difference of the directions of 22 dB. Furthermore, by adjusting the net birefringence in the cavity, the laser can operate in a bidirectional generation. In this case, a laser pumped with 75 mW power at 980 nm generates almost identical 790 and 570 fs soliton pulses with an average power of 1.17 and 1.11 mW. The operation stability and pulse quality of the soliton pulses in both unidirectional regimes are highly competitive with those generated in conventional ring fibre lasers with isolator in the cavity. Demonstrated bidirectional laser operation can find vital applications in gyroscopes or precision rotation sensing technologies.

Aerodynamic load characteristics evaluation and tri-axial performance testing on fiber reinforced polymer connections and metal fasteners to promote hurricane damage mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. ^ The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated triaxial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. ^ The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing. ^

Parental and cultural influences on Hispanic college women's verbal intimate partner violence victimization: An examination of within group differences

Prior research has shown that college women in the United States are experiencing significantly high rates of verbal intimate partner violence (IPV); estimates indicate that approximately 20-30% of college women experience verbal IPV victimization (e.g., Hines, 2007; Muñoz-Rivas, Graña, O'Leary, & González, 2009). Verbal IPV is associated with physical consequences, such as chronic pain and migraine headaches, and psychological implications, including anxiety, depression, suicidal ideation, and substance use (Coker et al., 2002). However, few studies have examined verbal IPV in college populations, and none have focused on Hispanic college women who are members of the largest minority population on college campuses today (Pew Research Center, 2013), and experience higher rates of IPV victimization (Ingram, 2007). The current dissertation sought to address these gaps by examining the influence of familial conflict strategies on Hispanic college women's verbal IPV victimization. Further, within group differences were explored, with specific attention paid to the role of acculturation and gender role beliefs. A total of 906 from two Hispanic Serving Institutions (HSI) in the southeastern (N=502) and southwestern (N=404) United States participated in the three part study. Study one examined the influence of parental conflict strategies on Hispanic women's verbal IPV victimization in current romantic relationships. Consistent with previous research, results indicated that parental use of verbal violence influenced verbal IPV victimization in the current romantic relationship. A unidirectional effect of paternal use of verbal aggression towards the participant on maternal verbal aggression towards the participant was also found. Study two examined the influence of parental conflict strategies, acculturation, and gender role beliefs on victimization. Acculturation and gender role beliefs were found to not have an influence on participants' verbal IPV victimization. Study three examined within-group differences using Study two's model. Differences were found between the southeastern and southwestern participants; gender role beliefs increased rates of verbal IPV victimization in the southeastern population. The current dissertation fills a gap in the literature on IPV experiences in Hispanic college populations, the importance of examining verbal IPV trends, and highlights importance differing cultural influences within populations traditionally viewed as homogenous. The implications for future research are discussed.^

Aerodynamic Load Characteristics Evaluation and Tri-Axial Performance Testing on Fiber Reinforced Polymer Connections and Metal Fasteners to Promote Hurricane Damage Mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated tri-axial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing.

Predictors of Independent Living Outcomes Among Older Women Receiving Informal Care

This study examined the predictors of independent living outcomes among community–living older women who received informal care. The central hypothesis was that older women’s level of functioning is influenced by their relationship with their informal caregiver. The study attempted to understand the independence of older women through the perspective of both informal caregivers and the older women themselves. The following eight variables were measured: 1) the older women’s independence (dependent variable); 2) the relationship between older women and their informal caregivers (independent variable); 3) roles of both the informal caregiver and older women (independent variable); 4) the older women’s attitudes toward aging (independent variable); 5) the older women’s age identity (independent variable); 6) the older women’s health (control variable); 7) the older women’s level of social support (control variable); and 8) the older women’s level of depression (control variable). The variables were measured from the perspective of the older woman herself and her informal caregiver. This study used an ecological and developmental framework along with role theory to understand the interaction among the aforementioned variables through a cross-sectional design. The recruited older women participants of this study were receiving ongoing care and personal assistance from two large home care agencies located in Miami, FL. An analysis was conducted through a mixed-methods incorporated into the study design. The present study aimed to contribute to the understanding of how the relationship between older women and their informal caregivers influences older women’s ability to maintain independent outcomes. The primary finding of this study was that there were both positive and negative experiences within the relationship dynamic of older women and their informal caregivers and that this relationship was either unidirectional or bi-directional.

Understanding the role of Dimethylsulfoniopropionate as a Potential Chemotactic Cue for Coral-Associated Bacteria

Most reef-building corals are known to engage in symbiosis not only with unicellular dinoflagellates from the genus, Symbiodinium, but they also sustain highly complex symbiotic associations with other microscopic organisms such as bacteria, fungi, and viruses. The details of these non-pathogenic interactions remain largely unclear. The impetus of this study is to gain a better understanding of the symbiotic interaction between marine bacteria and a variety of coral species representative of differing morphologies. Studies have shown that certain bacterial orders associate specifically with certain coral species, thus making the symbiotic synergy a non-random consortium. Consequently both corals and bacteria may be capable of emitting chemical cues that enables both parties to find one another and thus creating the symbiosis. One potential chemical cue could be the compound DMSP (Dimethylsulfoniopropionate) and its sulphur derivatives. Reef-building corals are believed to be the major producers of the DMSP and its derivatives during times of stress. As a result corals could potentially attract their bacterial consortium depending on their DMSP production. Corals may be able to adapt to fluctuating environmental conditions by changing their bacterial communities to that which may aid in survival. The cause of this attraction may stem from the capability of a variety of marine bacteria to catabolize DMSP into different metabolically significant pathways, which may be necessary for the survival of these mutualistic interactions. To test the hypothesis that coral-produced DMSP play a role in attracting symbiotic bacteria, this study utilized the advent of high-through sequencing paired with bacterial isolation techniques to properly characterize the microbial community in the stony coral Porites astreoides. We conducted DMSP swarming and chemotaxis assays to determine the response of these coral-associated bacterial isolates towards the DMSP compound at differing concentrations. Preliminary data from this study suggests that six out of the ten bacterial isolates are capable of conducting unidirectional motility; these six isolates are also capable of conducting swarming motility in the direction of an increasing DMSP concentration gradient. This would indicate that there is a form of positive chemotaxis on behalf of the bacteria towards the DMSP compound. By obtaining a better understanding of the dynamics that drive the associations between bacterial communities and corals, we can further aid in the protection and conservation processes for corals. Also this study would further elucidate the significance of the DMSP compound in the survival of corals under times of stress.

Understanding the role of Dimethylsulfoniopropionate as a Potential Chemotactic Cue for Coral-Associated Bacteria

Most reef-building corals are known to engage in symbiosis not only with unicellular dinoflagellates from the genus, Symbiodinium, but they also sustain highly complex symbiotic associations with other microscopic organisms such as bacteria, fungi, and viruses. The details of these non-pathogenic interactions remain largely unclear. The impetus of this study is to gain a better understanding of the symbiotic interaction between marine bacteria and a variety of coral species representative of differing morphologies. Studies have shown that certain bacterial orders associate specifically with certain coral species, thus making the symbiotic synergy a non-random consortium. Consequently both corals and bacteria may be capable of emitting chemical cues that enables both parties to find one another and thus creating the symbiosis. One potential chemical cue could be the compound DMSP (Dimethylsulfoniopropionate) and its sulphur derivatives. Reef-building corals are believed to be the major producers of the DMSP and its derivatives during times of stress. As a result corals could potentially attract their bacterial consortium depending on their DMSP production. Corals may be able to adapt to fluctuating environmental conditions by changing their bacterial communities to that which may aid in survival. The cause of this attraction may stem from the capability of a variety of marine bacteria to catabolize DMSP into different metabolically significant pathways, which may be necessary for the survival of these mutualistic interactions. To test the hypothesis that coral-produced DMSP play a role in attracting symbiotic bacteria, this study utilized the advent of high-through sequencing paired with bacterial isolation techniques to properly characterize the microbial community in the stony coral Porites astreoides. We conducted DMSP swarming and chemotaxis assays to determine the response of these coral-associated bacterial isolates towards the DMSP compound at differing concentrations. Preliminary data from this study suggests that six out of the ten bacterial isolates are capable of conducting unidirectional motility; these six isolates are also capable of conducting swarming motility in the direction of an increasing DMSP concentration gradient. This would indicate that there is a form of positive chemotaxis on behalf of the bacteria towards the DMSP compound. By obtaining a better understanding of the dynamics that drive the associations between bacterial communities and corals, we can further aid in the protection and conservation processes for corals. Also this study would further elucidate the significance of the DMSP compound in the survival of corals under times of stress.

Influência do retardante de chamas nas propriedades mecânicas e flamabilidade em compósitos poliméricos de epóxi/fibra de curauá

Currently, there is a great search for materials derived from renewable sources. The vegetable fibers as reinforcement for polymer matrixes, has been used as an alternative to replace synthetic fibres, being biodegradable and of low cost. The present work aims to develop a composite material with epoxy resin reinforced with curauá fibre with the addition of alumina trihydrate (aluminum hydroxide, Al(OH)3) as a flame retardant, which was used in proportions of 10 %, 20% and 30% of the total volume of the composite. The curauá fibers have gone through a cleaning process with an alkaline bath of sodium hydroxide (NaOH ), parallelized by hand and cut carding according to the default length . They were molded composites with fibers 30cm. Composites were molded in a Lossy Mold with unidirectional fibres in the proportion of 20% of the total volume of the composite. The composites were prepared in the Chemical Processing Laboratory of the Textile Engineering Department at UFRN. To measure the performance of the material, tests for the resistance to traction and flexion were carried out. with samples that were later analyzed in the Electronic Microscopy Apparatus (SEM ). The composites showed good mechanical properties by the addition of flame retardant and in some cases, leaving the composite more vulnerable to breakage. These mechanical results were analyzed by chi-square statistical test at the 5% significance level to check for possible differences between the composite groups. Flammability testing was conducted based on the standard Underwriters Laboratory 94 and the material showed a satisfactory result taking their average burn rate (mm / min) decreasing with increasing addition of the flame retardant composite.

O BOCA A BOCA ON-LINE: AS IMPLICAÇÕES DA VOZ DO CONSUMIDOR NA COMUNICAÇÃO DE MERCADO

O consumidor contemporâneo, inserido em um novo ambiente de comunicação, potencializa suas expressões, capaz de avaliar uma marca ou produto e transmitir sua opinião pelas redes sociais, ou seja, o consumidor expressa suas opiniões e desejos dialogando com seus pares de forma espontânea nas redes sociais on-line. É neste ambiente de participação e interação (ciberespaço) que está nosso objeto de estudo, o boca a boca on-line – a voz do consumidor contemporâneo, também conhecido como uma manifestação informativa pessoal ou uma conversa, a opinion sharing. Proporcionado pelos consumidores nas redes sociais on-line, o boca a boca se fortalece em função das possibilidades de interação, característica da sociedade em rede. Nesse cenário, oobjetivo desta pesquisa é caracterizar o boca a boca on-line como um novo fluxo comunicacional entre consumidores, hoje potencializado pelas novas tecnologias da comunicação, capazes de alterar a percepção da marca e demonstrar o uso, pelas marcas, das redes sociais on-line ainda como um ambiente de comunicação unidirecional. Mediante três casos selecionados por conveniência (dois casos nacionais e um internacional), o corpus de análise de nossa pesquisa se limitou aos 5.084 comentários disponibilizados após publicação de matérias jornalísticas no Portal G1 e nas fanpages (Facebook), ambos relativos aos casos selecionados. Com a Análise de Conteúdo dos posts, identificamos e categorizamos a fala do consumidor contemporâneo, sendo assim possível comprovar que as organizações/marcas se valem da cultura do massivo, não dialogando com seus consumidores, pois utilizam as redes sociais on-line ainda de forma unidirecional, além de não darem a devida atenção ao atual fluxo onde se evidencia a opinião compartilhada dos consumidores da sociedade em rede.