Memorandum of material furnished for superstructure on the line of the Port Dalhousie Thorold Railway by contract

Memorandum of material furnished for superstructure on the line of the Port Dalhousie Thorold Railway by contract. This document includes: Bills of timber, memorandums of planking, fencing, ties, track laying, masonry and bolts and spikes. There are also diagrams of culverts. One of the pages is loose and the outer pages are somewhat discoloured (32 pages, handwritten and bound with ribbon, n.d.

Letter of notification of the annual meeting of the Long Point Company sent to S.D. Woodruff from George H. Gillespie

Letter of notification of the annual meeting of the Long Point Company sent to S.D. Woodruff from George H. Gillespie. Col. Clark is to present his proposal about timber on the point, June 24, 1868.

Letter to J.P. Bradley from William Harmon of Bytown

Letter to J.P. Bradley from William Harmon of Bytown regarding money due from a timber sale, Sept. 25, 1847.

Broadside of a notice of laborers wanted

Broadside, 60 cm. x 45 cm. of a notice of laborers wanted. 300 woodsmen were required including choppers, scorers, hewers and teamsters for work on Long Point. It also states that there is a large quantity of timber for sale. Dec. 1868.

Synthesis of new zirconium complexes

L'étude suivante décrit la synthèse des ligands nacnacxylH, nacnacBnH, nacnacR,RH et nacnacCyH en utilisant une méthode générale qui implique des rendements élevés et des coûts raisonnables, la complexation de ces ligands au Zr, la caractérisation de ces complexes et l’investigation de leurs réactivités. Les complexes de zirconium ont été obtenus en utilisant deux méthodes synthétiques principales : la première consiste en traitement du sel de lithium du ligand avec le ZrCl4. La seconde est la réaction du ligand neutre avec les complexes d’alkyl-zirconium(IV) par protonation de l'alkyle coordonné. Le ligand adopte deux modes de coordination avec le Zr. Une coordination 2 est observée dans les complexes octaèdriques contenant un ou deux ligands nacnac. En présence d'un autre ligand ayant une coordonnation 5, par exemple Cp ou Ind, le ligand nacnac se trouve en coordination x avec le centre métallique de zirconium. En solution, les complexes obtenus de (nacnac)2ZrX2 montrent un comportement dynamique via un « Bailar-twist » et les paramètres d'activation de cette isomérisation ont été obtenus. Le complexe octaèdrique (nacnacBn)2ZrCl2, 2c, n'a pas montré de réactivité dans la carbozirconation et son alkylation n'était pas possible par l’échange des chlorures avec les alkyles. L’analogue dimethylé (nacnacBn)2ZrMe2, 2d, peut être préparé par alkylation du ZrCl4 avant la complexation du ligand. Ce dernier a été prouvé aussi de ne pas être réactif dans la carbozirconation.

Synthesis of new zirconium diketiminate complexes and catalytic applications

Résumé: Dans le but de préparer des complexes de Zr pour la catalyse homogène de la polymérisation des lactides et de l’hydroamination des olefines, l’elaboration et l’optimisation d’une méthode systématique et efficace de synthèse des ligands dikétimines ayant différents substituants alkyles (R) à la position N,N’ a été realisée. Des dikétimines (nacnacRH) symétriques ont été obtenus avec une pureté de plus de 95 % et un rendement de 65 % lorsque R = Me et des rendements allant de 80 à 95 % lorsque le groupe R = n-Pr, i-Pr, i-Bu, Bu, Cy et (+)-CH(Me)Ph. La synthèse des dikétimines ayant des substituants N-alkyls différents, dite asymétriques, donne toujours un mélange statistique de trois ligands: nacnacR,R’H, nacnacR,RH et nacnacR’,R’H qui n’ont pu être separés. Seuls les dikétimines asymétriques avec un substituant N-alkyl et un autre N-aryl (nacnacR,ArH) ont été obtenus avec des rendements plus élevés que celui du mélange statistique. Par la suite, la complexation de ces ligands bidentés au Zr, la caractérisation de ces complexes et l’investigation de la réactivité ont été étudiés. Les complexes de Zr de type (nacnacR)2ZrCl2 ont été obtenus par deux voies de synthèse principales: la première consiste à traiter le sel de lithium du ligand avec le ZrCl4. La seconde est la réaction du ligand avec les complexes neutres d’alkyl-zirconium(IV) par protonation de l'alkyle coordonné. En solution, les complexes obtenus de (nacnacR)2ZrX2 possèdent un comportement dynamique via un « Bailar-twist » et les paramètres d'activation de cette isomérisation ont été calculés. Le complexe octaèdrique (nacnacBn)2ZrCl2 n'est pas réactif dans la carbozirconation et son alkylation n'était pas possible par l’échange des chlorures avec les alkyles. L’analogue diméthylé (nacnacBn)2ZrMe2 peut être préparé par alkylation du ZrCl4 avant la complexation du ligand. On a également observé que ce dernier n’est pas réactif dans la carbozirconation. L‘analogue diéthoxyde (nacnacBn)2Zr(OEt)2 est obtenu par échange des diméthyles avec les éthoxydes. La polymérisation du lactide avec celui-ci en tant que précurseur est relativement lente et ne peut être effectuée que dans le monomère fondu. Par conséquent, pour résoudre les problèmes rencontrés avec les complexes de zirconium (dikétiminates non-pontés), un ligand dikétimines pontés par le diaminocyclohexane, (±)-C6H10(nacnacXylH)2, LH2, (Xyl = 2,6-diméthylphényle) a été préparé. La complexation de ce ligand tetradenté au metal a été réalisée par deux voies de synthèse; la première est la réaction du sel de lithium de ce ligand avec le ZrCl4(THF)2. La deuxième est la déprotonation du ligand neutre avec le Zr(NMe2)4 et l’élimination du diméthylamine. Des complexes du type: (±)-C6H10(nacnacXylH)2ZrX2 avec X = Cl, NMe2 ont été obtenus. Les ligands de chlorure sont dans ce cas facilement remplaçables par des éthoxydes ou des méthyles. On a observé l’activité la plus élevée jamais observée pour un complexe d’un métal du groupe 4 avec le complexe de (±)-C6H10(nacnacXylH)2Zr(OEt)2 dans la polymérisation de lactide. L'étude cinétique a montré que la loi de vitesse est du premier ordre en catalyseur et en monomère et la constante de vitesse est k = 14 (1) L mol-1 s-1. L'analyse des polymères a montré l’obtention de masses moléculaires faibles et l’abscence de stéréocontrôle. La réaction de (±)-C6H10(nacnacXylH)2ZrCl2 avec le triflate d’argent donne le (±)-C6H10(nacnacXylH)2Zr(OTf)2. Le complexe bis-triflate obtenu possède une activité catalytique elevée pour les additions du type aza-Michael. L’utilisation du R,R-C6H10(nacnacXylH)2Zr(OTf)2 énantiopur comme catalyseur, dans les additions du type aza-Michael asymétriques donne le produit desiré avec un excès énantiomérique de 19%.

Studies on sphaeroma terebrans bate of the port of Cochi

Sphaeroma terebrans Bate, one of the most destructive wood-boring isopod crustacean occurring in the Cochin harbour region was taken up for investigations on its habitat, breeding, attack on timber, salinity tolerance and respiration. The respiration of the animal under different stresses was noted using an instrument fabricated in the laboratory. Of the various hydrographic conditions of the Cochin harbour region studied, salinity is found to be the most fluctuating factor and the variations are largely influenced by the seasonal rain fall from one side and the tidal currents on the other.In spite of the great fluctuations in salinity, Sphaeroma terebrans occurs throughout the year in the Cochin harbour region, though their number varies in different months. Exposure tests show that Sphaeroma terebrans can remain for about 20 to 24 hours outside water in a damp atmosphere.

A Modeling Analysis of Changing Global Land Use as affected by Changing Demands for Wood Products

The 21st century has brought new challenges for forest management at a time when globalization in world trade is increasing and global climate change is becoming increasingly apparent. In addition to various goods and services like food, feed, timber or biofuels being provided to humans, forest ecosystems are a large store of terrestrial carbon and account for a major part of the carbon exchange between the atmosphere and the land surface. Depending on the stage of the ecosystems and/or management regimes, forests can be either sinks, or sources of carbon. At the global scale, rapid economic development and a growing world population have raised much concern over the use of natural resources, especially forest resources. The challenging question is how can the global demands for forest commodities be satisfied in an increasingly globalised economy, and where could they potentially be produced? For this purpose, wood demand estimates need to be integrated in a framework, which is able to adequately handle the competition for land between major land-use options such as residential land or agricultural land. This thesis is organised in accordance with the requirements to integrate the simulation of forest changes based on wood extraction in an existing framework for global land-use modelling called LandSHIFT. Accordingly, the following neuralgic points for research have been identified: (1) a review of existing global-scale economic forest sector models (2) simulation of global wood production under selected scenarios (3) simulation of global vegetation carbon yields and (4) the implementation of a land-use allocation procedure to simulate the impact of wood extraction on forest land-cover. Modelling the spatial dynamics of forests on the global scale requires two important inputs: (1) simulated long-term wood demand data to determine future roundwood harvests in each country and (2) the changes in the spatial distribution of woody biomass stocks to determine how much of the resource is available to satisfy the simulated wood demands. First, three global timber market models are reviewed and compared in order to select a suitable economic model to generate wood demand scenario data for the forest sector in LandSHIFT. The comparison indicates that the ‘Global Forest Products Model’ (GFPM) is most suitable for obtaining projections on future roundwood harvests for further study with the LandSHIFT forest sector. Accordingly, the GFPM is adapted and applied to simulate wood demands for the global forestry sector conditional on selected scenarios from the Millennium Ecosystem Assessment and the Global Environmental Outlook until 2050. Secondly, the Lund-Potsdam-Jena (LPJ) dynamic global vegetation model is utilized to simulate the change in potential vegetation carbon stocks for the forested locations in LandSHIFT. The LPJ data is used in collaboration with spatially explicit forest inventory data on aboveground biomass to allocate the demands for raw forest products and identify locations of deforestation. Using the previous results as an input, a methodology to simulate the spatial dynamics of forests based on wood extraction is developed within the LandSHIFT framework. The land-use allocation procedure specified in the module translates the country level demands for forest products into woody biomass requirements for forest areas, and allocates these on a five arc minute grid. In a first version, the model assumes only actual conditions through the entire study period and does not explicitly address forest age structure. Although the module is in a very preliminary stage of development, it already captures the effects of important drivers of land-use change like cropland and urban expansion. As a first plausibility test, the module performance is tested under three forest management scenarios. The module succeeds in responding to changing inputs in an expected and consistent manner. The entire methodology is applied in an exemplary scenario analysis for India. A couple of future research priorities need to be addressed, particularly the incorporation of plantation establishments; issue of age structure dynamics; as well as the implementation of a new technology change factor in the GFPM which can allow the specification of substituting raw wood products (especially fuelwood) by other non-wood products.

Conformations of poly{G}-poly{C} π stacks with high hole mobility

Charge transfer properties of DNA depend strongly on the π stack conformation. In the present paper, we identify conformations of homogeneous poly-{G}-poly-{C} stacks that should exhibit high charge mobility. Two different computational approaches were applied. First, we calculated the electronic coupling squared, V2, between adjacent base pairs for all 1 ps snapshots extracted from 15 ns molecular dynamics trajectory of the duplex G15. The average value of the coupling squared 〈 V2 〉 is found to be 0.0065 eV2. Then we analyze the base-pair and step parameters of the configurations in which V2 is at least an order of magnitude larger than 〈 V2 〉. To obtain more consistent data, ∼65 000 configurations of the (G:C)2 stack were built using systematic screening of the step parameters shift, slide, and twist. We show that undertwisted structures (twist<20°) are of special interest, because the π stack conformations with strong electronic couplings are found for a wide range of slide and shift. Although effective hole transfer can also occur in configurations with twist=30° and 35°, large mutual displacements of neighboring base pairs are required for that. Overtwisted conformation (twist38°) seems to be of limited interest in the context of effective hole transfer. The results may be helpful in the search for DNA based elements for nanoelectronics

Movement of Juvenile Songbirds in Harvested Boreal Forest: Assessing Residency Time and Landscape Connectivity

Little is known about juvenile songbird movement in response to timber harvest, particularly in the boreal forest. If clearcut land cover facilitates movement, the availability of resources may increase. However, if clearcut land cover impedes movement, important post-fledging resources may be rendered inaccessible. Using radio telemetry, we tested the hypothesis that regenerating clearcut land cover would affect the movement of recently independent Yellow-rumped Myrtle Warblers (Dendroica coronata coronata) and Blackpoll Warblers (Dendroica striata) differently than forested land cover owing to intrinsic differences in each land-cover type or in how they are perceived. We found that both species moved extensively before migration. We also found that Blackpoll Warblers were quick to exit local areas composed of clearcut land cover and that both species were quick to exit neighborhoods composed of large proportions of clearcut land cover. However, if individuals encountered clearcut land cover when exiting the neighborhood, movement rate was slowed. Effectively, residency time decreased in clearcut neighborhoods and landscape connectivity was impeded by clearcut land cover. Our results suggest that clearcut land cover may represent low-quality habitat for both species during the post-fledging period. Further research is needed to determine if changes in movement behavior associated with landscape structure affect individual condition and higher-level ecological processes.

Numerical Response of Breeding Birds Following Experimental Selection Harvesting in Northern Hardwood Forests

Silvicultural treatments have been shown to alter the composition of species assemblages in numerous taxa. However, the intensity and persistence of these effects have rarely been documented. We used a before-after, control-impact (BACI) paired design, i.e., five pairs of 25-ha study plots, 1-control and 1-treated plot, to quantify changes in the density of eight forest bird species in response to selection harvesting over six breeding seasons, one year pre- and five years postharvest. Focal species included mature forest associates, i.e., Northern Parula (Setophaga americana) and Black-throated Green Warbler (Setophaga virens), forest generalists, i.e., Yellow-bellied Sapsucker (Sphyrapicus varius) and Swainson’s Thrush (Catharus ustulatus), early-seral specialists, i.e., Mourning Warbler (Geothlypis philadelphia) and Chestnut-sided Warbler (Setophaga pensylvanica), species associated with shrubby forest gaps, i.e., Black-throated Blue Warbler (Setophaga caerulescens), and mid-seral species, i.e., American Redstart (Setophaga ruticilla). As predicted, we found a negative numerical response to the treatment in the Black-throated Green Warbler, no treatment effect in the Yellow-bellied Sapsucker, and a positive treatment effect in early-seral specialists. We only detected a year effect in the Northern Parula and the American Redstart. There was evidence for a positive treatment effect on the Swainson’s Thrush when the regeneration started to reach the pole stage, i.e., fifth year postharvest. These findings suggest that selection harvesting has the potential to maintain diverse avian assemblages while allowing sustainable management of timber supply, but future studies should determine whether mature-forest associates can sustain second- and third-entry selection harvest treatments.

Stand and within-stand factors influencing Golden-winged Warbler use of regenerating stands in the central Appalachian Mountains

The Golden-winged Warbler (Vermivora chrysoptera) is currently being considered for protected status under the U.S. Endangered Species Act. The creation of breeding habitat in the Appalachian Mountains is considered a conservation priority for this songbird, which is dependent on extensively forested landscapes with adequate availability of young forest. We modeled abundance of Golden-winged Warbler males in regenerating harvested forest stands that were 0-17 years postharvest at both mid-Appalachian and northeast Pennsylvania regional scales using stand and within-stand characteristics of 222 regenerating stands, 2010-2011. Variables that were most influential at the mid-Appalachian scale were different than those in the northeast region. Across the mid-Appalachian ecoregion, the proportion of young forest cover, i.e., shrub/scrub cover, within 1 km of regenerating stands best explained abundance of Golden-winged Warblers. Golden-winged Warbler response was best explained by a concave quadratic relationship in which abundance was highest with 5-15% land in young forest cover. We also found evidence that the amount of herbaceous cover, i.e., the amount of grasses and forbs, within a regenerating stand positively influenced abundance of Golden-winged Warblers. In northeastern Pennsylvania, where young forest cover is found in high proportions, the distance to the nearest regenerating stand best explained variation in abundance of Golden-winged Warblers. Abundance of Golden-winged Warblers was <1 male per survey when another regenerating stand was >1500 m away. When modeling within-stand features in the northeast region, many of the models were closely ranked, indicating that multiple variables likely explained Golden-winged Warbler response to within-stand conditions. Based on our findings, we have proposed several management guidelines for land managers interested in creating breeding habitat for Golden-winged Warblers using commercial timber operations. For example, we recommend when managing for Golden-winged Warblers in the central Appalachian Mountains that managers should strive for 15% young forest in a heavily forested landscape (>70% forest cover) and cluster stands within 1-2 km of other young forest habitats.

Croft Moraig and the chronology of stone circles

The Perthshire stone circle of Croft Moraig was excavated 40 years ago and is usually taken to illustrate the classic sequence at such monuments in Britain. A timber setting, accompanied by a shallow ditch, was replaced by two successive stone settings. The pottery associated with the earliest construction was dated to the Neolithic period. A new analysis of the excavated material suggests that, in fact, the ceramics are Middle or Late Bronze Age. They provide a terminus post quem for at least one of the stone settings on the site. Further study of the evidence suggests an alternative sequence of construction at Croft Moraig, involving a change in the axis of the monument. It seems possible that other stone and timber circles were equally late in date and that their period of use in Britain and Ireland may have been longer than is generally supposed.

A critical assessment of unbalanced surface stresses: Some complementary considerations

The wide-ranging survey of twisted growth in polymers by Lotz and Cheng cites extensive evidence consistent with the relief of surface stress being the underlying cause. This complementary note contributes to the discussion by making three main points. First, it is necessary to go further and explain the key issue of how a consistent twist is maintained when, as commonly, this habit has a lower symmetry than the crystallographic lattice. Detailed study has shown that, in polyethylene, this occurs by reorganization of the initial fold surfaces. Second, the suggested explanation by Keith and Padden that. in polyethylene, the asymmetric habit derives from molecules adding to lamellae with inclined fold surfaces is invalid being doubly inconsistent with observation. Third, twisting has now been linked to faster growth by study of row structures in polyethylene. This produces inherently rough fold surfaces in Regime II whose internal stresses drive reorganization and twisting. For slower (Regime I) growth, fold surfaces form with and maintain ordered packing so providing no basis for twisting. These new insights radically alter the context of twisted growth and provide a firm factual basis for further work. (c) 2005 Elsevier Ltd. All rights reserved.