Porous tin film synthesized by electrodeposition and the electrochemical performance for lithium-ion batteries

Porous tin films as anode for lithium-ion batteries are electrodeposited on graphite paper. Homogeneous tin films with significant void space accommodate the volume change during tin lithiation/delithiation. Through adjusting the electrodeposition currents and time, the morphologies and void space of tin films on graphite paper are controllable. At fixed electrodeposition current densities, the prolonged electrodeposition time plays the role in growing big tin particles and resulting the disappearance of void space among tin particles. The increased electrodeposition current plays the role to increase the quantity of tin seeds in thickness of tin film, and the void space among tin particles remains but the thick film limits its electrochemical performance. The tin films electrodeposited at an optimized current densities and for an optimized electrodeposition time, present the best electrochemical performance, because the tin nanoparticles are well dispersed on graphite substrate including void space. The tin film electrodeposited at 0.2 A cm-2 for 2 min shows the capacity of 1.0 mAh cm-2 after 50 charge/discharge cycles. The void space of tin film is very important for the best capacity and cyclic ability. The metallic tin film produced at 0.4 A cm-2 for 3 min remains the uniform and microporous structure after charge/discharge for 50 cycles.

Genesis and character of thin-bedded turbidites associated with submarine channels

Acknowledgements We acknowledge the support of the PRACSS Joint Industry Project at University of Aberdeen, funded by BG Group, BP, DONG, RWE Dea, Petrochina, Statoil and Tullow Oil. We also acknowledge the entire crew of the Urania Research vessel which was used to acquire the CHIRP lines, bathymetric data and gravity cores from the Tyrrhenian Sea, Italy. Our colleagues Michal Janocko and Mike Mayall are thanked for the discussions and comments. Our colleagues Pan Li, Amanda Santa Catharina, Guilherme Bozetti and Matheus Silveira Sobiesiak are thanked for their assistance during field work where some of the ideas in this paper were synthesized. Finally we thank one anonymous reviewer and Brian Romans for their invaluable feedback which made some of the ideas introduced in this review much more succinct.

Irrigation regime affected SOC content rather than plow layer thickness of rice paddies : A county level survey from a river basin in lower Yangtze valley, China

Acknowledgements This work was funded by Natural Science Foundation of China under grant numbers of 41071337 and 40830528 and jointly by the Priority Academic Program Development of Jiangsu Higher Education Institutions, China.

Producer Jerry Weintraub and reporter for the NY Daily News Pete Hamil on the set of "Cruising" film

General note: Title and date provided by Bettye Lane.

Colonialism, political unconscious and cognitive mapping in the space of the film "Captain Phillips"

The purpose of this article has been made through a Marxist analysis of the US film "Captain Phillips" (PaulGreengrass, 2013), based on a true story. I have found how the evolution of capitalism in the West continuesto consolidate the belief reified in a historical and geographical superiority of the political and socioeconomicwestern models regarding Africa and Asia lowers models. At the same time, through categories like dialecticalmaterialism, criticism of diffusionist theory and application of cognitive mapping to large geopoliticalspaces located in most poor areas of the world, I have realized a remark about currently being articulatingthe political unconscious of working class in rich countries and the poor in poor countries, establishing arelationship between the ideological representation that takes an individual from his historical reality (ona scale that moves from local to global), and how he has developed a mental ability to escape of the responsibilityto make a critical review of what's happening around him in all areas. Finally, through physicalspace captured in the film, I have realized a materialist critique of globalized business process that takesplace through the carriage of goods, outlining spatial and cognitively limits of the mentality of our time, bothamong "winners"as among the "losers", based on the spatial movement of capital.

Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear

An investigation was carried out on CLT panels made from Sitka spruce in order to establish the effect of the thickness of CLT panels on the bending stiffness and strength and the rolling shear. Bending and shear tests on 3-layer and 5-layer panels were performed with loading in the out-of-plane and in-plane directions. ‘Global’ stiffness measurements were found to correlate well with theoretical values. Based on the results, there was a general tendency that both the bending strength and rolling shear decreased with panel thickness. Mean values for rolling shear ranged from 1.0 N/mm2 to 2.0 N/mm2 .

Finite element modeling of straightening of thin-walled seamless tubes of austenitic stainless steel

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Design and Fabrication of Perovskite Micro-Cavity Lasers

Thesis (Master's)--University of Washington, 2016-08

Development of a whole cell biochip for toxicant detection.

In the development of biosensors for ecotoxicity testing it is desirable to produce a small, portable system that can be used in the field. Toxicity testing using bioluminescence is widely used in the laboratory utilising natural and genetically modified (lux/ luc-marked) bacteria and other microorganisms. It is currently not possible to use genetically manipulated microorganisms in field testing and a biosensor, therefore, that incorporates naturally luminescent organisms may be preferred. In the development of a biosensor it is aimed to use the naturally luminescent bacterium Vibrio fischeri as a toxicity detection system on a chip. The bacterium will be immobilised in a polymeric matrix. Current work deals with the optimisation of light output and light preservation within the bacterium prior to immobilisation in polyvinyl alcohol. An examination of a range of physicochemical conditions within the polymer will be made, including cell density, thickness of polymer film, growth and light induction environment, and, preservation conditions, in order to develop a testing system giving consistent results over the lifetime of the biosensor. Data will be presented on light production using different culture media for the growth of V. fischeri and retention of light under immobilised conditions. .