Análise microbiológica e físico-química de material proteico comestível derivado do processamento da gordura oriunda do abate de bovinos

Background: The use of all by-products of bovine slaughter is of high economic importance for the industries of products of animal origin. Among these products, fat has an important role, once fat rendering may generate several different products, such as protein material that may be used in the manufacture of meat products. However, in spite of the importance that the use of all by-products has for the economic balance of the industry, there are no reports on their use in Brazil, or studies that supply data on microbiological and physical-chemical local standards for this protein. Thus, the objective of this study was to evaluate microbiological and physical-chemical characteristics of protein material obtained from fat rendering, as well as to provide support for companies to use fat rendering to generate protein material, adding value to industrialized meat products.Materials, Methods & Results: The experimental production of edible protein obtained of fat rendering was conducted in slaughterhouse with supervision of the Brazilian Ministry of Agriculture, Livestock and Food Supply. Protein material was obtained in a continuous, humid heat system at high temperatures. Fat scraps containing protein were ground and cooked at high temperature (85 degrees C), and placed in a three phase decanter centrifuge. After centrifugation, protein material was ground again and packed. Samples were collected from 15 batches of protein material, and the following microbiological analyses were carried out: counts of aerobic mesophilic and psychrotrophic microorganisms, coliforms at 35 degrees C, Escherichia coli, sulfite-reducing Clostridium, and Staphylococcus aureus, besides presence or absence of Salmonella and Listeria monocytogens. The following physical-chemical analyses were also carried out: protein, total lipid, moisture, ash, carbohydrate, and energy content. Mean counts of mesophiles, psychrotrophs, and coliforms at 35 degrees C were 4.17; 3.69 and 1.87 (log CFU/g), respectively. Levels of protein, total lipids, moisture, ashes and carbohydrates were 27.50; 7.83; 63.88%; 0.24%; and 0.55%, respectively, and energy content was 182.63 kcal/100g.Discussion: Results of microbiological analyses demonstrated that, although low, the final product showed to be contaminated. Contamination that occurred during the second grinding procedure may be an explanation for these bacterial counts. Also, the temperature used for fat fusion was not enough to eliminate thermoduric microorganisms. However, even with the presence of indicator microorganisms in the samples, none was contaminated by E. coli, sulfite-reducing Clostridium, S. aureus, Salmonella or L. monocytogenes. Physical-chemical analyses showed that the product had adequate nutritional quality. Based on these results, it was possible to conclude that protein material obtained in fat rendering showed characteristics that enable the use of this product as raw material for processed meat products. Besides, the present study was the first one to present scientific results in relation to edible by-products obtained in fat rendering, supplying important information for slaughterhouses and meat-processing plants. The study also produced relevant data on the innocuousness of the product, which may be used to guide decision-making of health inspectors.

The effect of exogenous fibrolytic enzymes and a ferulic acid esterase-producing inoculant on the fibre degradability, chemical composition and conservation characteristics of alfalfa silage

The objective of this study was to determine the effect of applying fibrolytic enzymes at ensiling, either alone or in combination with a ferulic acid esterase-producing bacterial silage inoculant, on the silage conservation characteristics and nutritive value of alfalfa (Medicago sativa L). Second-cut alfalfa (340 g DM/kg fresh crop) was harvested, wilted, chopped and sub-sampled into 24 batches. Samples were randomly allocated in triplicate to one of four enzyme product treatments supplying endoglucanases and xylanases: none (control), EN1, EN2, EN3; applied alone or in combination with a ferulic acid esterase-producing silage inoculant (FAEI). Treatments were arranged in a 4 x 2 factorial design. All enzyme treatments were applied at 2 ml enzyme product/kg herbage DM, and inoculant was applied at 1 x 10(5) cfu/g fresh herbage. Samples were packed into laboratory-scale silos and stored for 7, 27 or 70 days, and analysed for dry matter (DM) losses, aerobic stability, chemical composition and in vitro ruminal degradability. The use of enzymes did not affect (P>0.05) ensilage DM losses or lactic or acetic acid concentrations after 70 days of ensilage, compared to the control silage. Silage produced using EN1 had lesser neutral detergent fibre (aNDF, P=0.046) and acid detergent fibre (ADF; P=0.006) concentrations than control silage. However, no difference (P>0.05) was observed between the control silage and silage produced with EN1 for aNDF or ADF degradability (NDFD, ADFD). Silages produced with FAEI had greater DM losses (P=0.017) and pH (P<0.001) and lesser NDFD (P=0.019), ADFD (P=0.010) and proportion of lactic acid in the total fermentation products (P=0.006) after 70 days of ensilage, compared to uninoculated silages. The use of fibrolytic enzymes did not have a major effect on the ensilage fermentation of alfalfa, either ensiled alone or with an inoculant. No advantage in ruminal DM or fibre degradability was observed for silages produced with fibrolytic enzymes. The use of a ferulic acid esterase-producing inoculant alone did not improve the nutritive value of alfalfa silage, and did not promote any incremental effects when applied in combination with fibrolytic enzyme products. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

LEVANTAMENTO DAS CARACTERÍSTICAS MICROBIOLÓGICAS DA ÁGUA POTÁVEL CONSUMIDA NA CIDADE DE POTIRENDABA - SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crescimento inicial e absorção de zinco pelo milho em função do modo de aplicação e fontes do nutriente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho e consumo de nutrientes em cordeiros alimentados com cana-de-açúcar hidrolizada sob diferentes condições

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A simulação de Monte Carlo como instrumento fundamental para a análise de viabilidade econômica: a implementação de uma fundição de ferro em uma empresa metalúrgica

In uncertainly economic scenarios, an economic feasibility analysis must be done to accept a project based on investment criteria, such as NPV and IRR, mainly because the shareholders tend to invest their budget in a project if it has a great chance to return their investments. The studied company outsources all of its foundry services, what makes it very dependent of its suppliers, because the products have a lower quality level, long delivery periods and high prices. Therefore, this work will analyze the project of building an iron-casting foundry to decrease the dependence of its suppliers. In order to develop this research, all needed data related to the construction of the foundry and sales were collected to create deterministic and probabilistic (Monte Carlo Simulation) cash flows using MsExcel® and Oracle's Crystal Ball® software. As a result, the project was found to be risky by the NPV and IRR in the case of this new production line supplying only the internal needs. However, when the company offers its services to the foundry market, the project turns to be feasible

Planejamento ambiental da bacia hidrográfica do córrego Embirí – UGRHI Pontal do Paranapanema – São Paulo: inventário e diagnóstico

This study aimed to contribute to the environmental planning of the watershed Embirí stream - UGRHI Pontal Paranapanema (belonging to the Paranapanema Management unit) in the cities of Presidente Prudente and Regente Feijó, São Paulo. This basin is located in the area of the Santo Anastácio river source, responsible for supplying water to about 30% of the population of Presidente Prudente. The methodological procedures based on Leal (1995) and Rodriguez et al. (2004), and the steps include inventory and diagnosis of the basin. We conducted extensive literature review, cartographic and documentary on the subject area of research, field work, preparation of thematic maps and summary chart of physical units and environmental use and land cover, participatory mapping of environmental risks, quality analysis of water. Most of the basin of the stream of twine had a high environmental fragility and the main problems found were lack of riparian vegetation, erosion, siltation of water bodies, irregular disposal of debris and the dumping of sewage. The results were summarized in the diagnosis and can identify the most important environmental impacts, environmental and spatial weaknesses of the legislation, and thus draw up proposals for action to the area that is substantially degraded

Conexão cultura: um projeto de revitalização e reestruturação da estação ferroviária de Guaratinguetá

This work presents an intervention at the Guaratinguetá Railway Station and its surroundings, including this area in the urban context, at this moment isolated of the activities and citizen attentions, offering new activities on this commercial area. The selected area finds itself in a state of neglect and forgetfulness from the urban relations. Located between the periphery of the commercial center and the Paraiba do Sul River, the correlation is tension between the advancement of shops, the railway line, and the natural barrier of the Paraiba River. On the context of these limits, the railroad and the river stand as barriers for the center expansion and the flows that connect the old part of the town with the new part, which is growing and is called “post-city river”. These barriers have relegating properties around them to isolation, despite being located in the center. The area choice and this intervention seeks to break this isolation and the barrier flow, linking areas of opposite sides to form a leak through the barrier of the railway line. The pedestrian flow is prioritized in the project, this flow will be attracted by the program offered and by the new created areas, increasing the space utilization by users and breaking the isolation of urban activities. And entering the area in the context of life of city residents. The attraction of these new flows will be through the implementation of a Cultural Center, supplying a lack of city by spaces that offer this type of activity. Its implementation aims to attract and modify the activities of these spaces and the surrounding areas, one side facing the commercial center, and another facing the river, linking this two sides at the same time that this link provides the expansion of distance traveled and known

Estudo sobre eficiência energética em uma indústria de injeção plástica

The reason of this work is perform a study about using of electrical energy to identify the opportunities through rational use of electrical energy. For that it was necessary perform an analysis of hired energy against consumption. Based in a guide of energy analysis were found the main consumers and verified the main problems, which generate excessive use of electrical energy in a plastic injection factory. It was also analyzed the painting line because there are some thermal equipment that use electrical energy. Based on the data obtained will be proposed ways to reduce the needless consumption and energy use of rationally and efficiently, in addition to re-evaluate the contracted demand based on the new policy of supplying and charging.It were also proposed thermodynamics solutions to reduce the energy consumed in thermal process

Chaveamento de cargas intermitentes usando sensor de corrente

Due to concerns about rational use of energy, several alternative technologies of power generation appeared, including the conversion of solar energy into electrical energy by photovoltaic panels. In low-income households, the refrigerator represents considerable impact on the electric bill, since it requires constant power given its use in food preservation. It is possible to reduce this share, with the use of an alternative energy source. This work presents a timed switching electronic system, which allows commercial equipment that is not affected by short interruptions in the power supply to use a photovoltaic panel as a source of alternative energy, which usually do not provide energy continuously. Switching is made automatically in case of low incidence of sunlight, and without any form of energy storage. Between each switching, there is a dead time without power supply, therefore preventing the use of synchronizers circuits between the photovoltaic panel and the public power grid. A circuit containing a 80C31 microcontroller is used to control the system’s switching. The photovoltaic panel’s voltage inverter is in H bridge configuration, and is also controlled by the microcontroller through Pulse Width Modulation, which makes use of preprogrammed tables to generate the control signals of the power transistors. Through the use of software simulations, the proposed system was tested, which is capable of supplying intermittent single-phase loads. The simulations indicates that the project developed in this paper can be assembled into a prototype and be tested under real operating conditions, as long as the scaling of components, the characteristics of the photovoltaic panel to be used, and the project involved load are taken into account

Efeito das frequências de alimentação sobre o desempenho, características de carcaça e saúde ruminal de bovinos nelore confinados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ocorrência de nitrato nas águas subterrâneas do Sistema Aquífero Bauru em áreas rurais

Pós-graduação em Geociências e Meio Ambiente - IGCE

Desenvolvimento de conexões hidráulicas: aplicação em sistemas de basculamento de cabines de caminhões no mercado brasileiro

The main goal of this thesis is to describe in details the development and manufacturing of hydraulic fittings for application in truck's cabin tilting lines, covering all of the pre-project, drawing, quotation and supplying processes. This development was planned due to Eaton Corporation - Hydraulics Group's interest in competing on this market with this kind of application. Company's standard procedures were executed until the final supplying stage could be reached. Moreover, the year in which this project was conducted was ruled by a crisis in the automotive segment and new opportunities had to be pursued and developed. Eaton's USA, India and China (facilities located in Aurora, Pune and Shanghai, respectively) engineering team offered all the support in order for this project to come true. As a result there are new part numbers in the company's portfolio, which now offers new fittings and a new type of adapter that was unknown prior to the project. This way Eaton has conquered even more space with this cabin tilting application and the customers (OEMs) have an alternative and homologated supplier to purchase from. Financially speaking, the project's sales income may vary from US$800,000.00 to US$1,300,000.00 worth during the following supplying years

Produção e posterior semeadura de sementes de soja enriquecida com molibdênio: qualidade fisiológica, alterações químicas e nutricionais, métodos e épocas de aplicação

Pós-graduação em Agronomia - FEIS

Algoritmo tabu search especializado para o problema de planejamento da expansao de sistemas de transmissão

Pós-graduação em Engenharia Elétrica - FEIS