Development of a quality index method (QIM) sensory scheme and study of shelf-life of ice-stored blackspot seabream (Pagellus bogaraveo)

The aim of this work was to develop a quality index method (QIM) scheme for whole ice-boxed refrigerated blackspot seabream and to perform shelf-life evaluations, using sensory analysis, GR Torrymeter measurements and bacterial counts of specific spoilage organisms (SSO) during chilled storage. A QIM scheme based on a total of 30 demerit points was developed. Sensory, physical and microbiological data were integrated and used to determine the rejection point. Results indicated that the shelf-life of blackspot seabream is around 12-13 days. (C) 2011 Elsevier Ltd. All rights reserved.

Multivariate analysis of fresh-cut carambola slices stored under different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrical conductivity as an indicator of pea seed aging of stored at different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative procedure for the cold test for soybean seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Postharvest Conservation of Mature-Green and Ripe 'Paluma' Guava Stored at Two Temperatures

This work aimed to establish the importance of maturation and ripeness stages and the use of refrigeration for the conservation of 'Paluma' guavas. Fruit picked at the mature-green and ripe stages were stored at ambient conditions (21 degrees C and 85% RH) and also at 10 degrees C (85% RH). The fruit were evaluated every 2 or 3 days for weight loss, appearance, decay, color, firmness, soluble solids, titratable acidity, ascorbic acid, total polyphenols extractable content and total antioxidant activity. The fruit stored at 21 degrees C had higher weight loss than those stored at 10 degrees C. Mature-green guavas at 21 degrees C remained in good quality for 6 days, but at 10 degrees C, the preservation period increased to 15 days. Ripe fruit were preserved for 4 days at 21 degrees C, which was extended with refrigeration to 6 days. Mature-green fruit at 21 degrees C had decay in 6 days; while at 10 degrees C decay happened in 18 days. The peel color of mature-green fruits, at 21 degrees C, showed increasing values of luminosity, indicating that its color became lighter (change from green to yellow) and at 10 degrees C it showed constant values until the end of storage. Pulp firmness of mature-green fruit declined during storage as a result of ripening. In ripe fruits such reduction occurred more slowly, since they were softer. The color of the pulp became intense red for mature fruits. Soluble solids were lower in ripe fruit at 21 degrees C, while in mature fruits at 10 degrees C, it increased. The titratable acidity increased in fruits stored at 10 degrees C. The fruits kept at 21 degrees C and the mature guavas kept at 10 degrees C showed no changes in ascorbic acid content. The ripe fruit at 10 degrees C maintained their ascorbic acid levels. Mature guavas, stored at 10 degrees C, had the longest shelf life and higher contents of soluble solids and titratable acidity, with no changes in total polyphenols extractable content and total antioxidant activity.

Changes in the quality of jaboticaba fruit (Myriciaria jaboticaba (Vell) Berg. cv. Sabara) stored under different oxygen concentrations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestion of feed fractions and intake of heifers fed hydrolyzed sugarcane stored for different periods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Amadurecimento da banana-prata climatizada em diferentes dias após a colheita

O amadurecimento induzido por climatização em bananas, é um procedimento que tem sido largamente utilizado. Ele proporciona uma maturação uniforme, já que a fruta apresenta maturação desuniforme em vista da formação dos frutos em pencas com diferentes idades. No entanto, não há para todas as cultivares de banana, estudos específicos em relação ao tempo entre a colheita e a climatização que possa afetar a qualidade dos frutos. Desta forma, com o presente trabalho objetivou-se avaliar mediante as características físicas, químicas e fisiológicas a qualidade da banana - prata climatizada em diferentes dias entre a colheita e a climatização. Foram testados três diferentes dias de climatização sendo 1, 2 e 3 dias após a colheita. Ao final da climatização, os frutos foram armazenados em temperatura ambiente por um período de 5 dias. As análises realizadas foram: perda de massa, coloração da casca, respiração, firmeza, pH, sólidos solúveis, acidez titulável e amido. Frutas climatizadas 1 dia após a colheita apresentaram-se, no 1º dia de armazenamento, com menor perda de massa, mais verdes, com maior liberação de CO2, mais firmes, com menores teores de sólidos solúveis e maior porcentagem de amido, quando comparados àqueles climatizados aos 2 e 3 dias após a colheita. Essa diferença foi reduzida com o decorrer do armazenamento praticamente se igualando os tratamentos ao final do armazenamento.

Resistance of stored bean varieties to Acanthoscelides obtectus (Coleoptera : Bruchidae)

During bean seed storage, yield can be lost due to infestations of Acanthoscelides obtectus Say, the bean weevil. The use of resistant varieties has shown promising results in fighting these insects, reducing infestation levels and eliminating chemical residues from the beans. The expression of resistance to A. obtectus in bean varieties is frequently attributed to the presence of phytohemagglutinins, protease inhibitors and alpha-amylase, and especially to variants of the protein arcelin, which reduce the larval viability of these insects. To evaluate the effect of bean seed storage time on the resistance expression of bean varieties to A. obtectus, tests with seeds of three ages (freshly-harvested, 4-month-old, and 8-month-old) were conducted in the laboratory, using four commercial varieties: Carioca Pitoco, Ipa 6, Porrillo 70, Onix; four improved varieties containing arcelin protein: Are. 1, Arc.2, Arc. 3, Arc.4; and three wild varieties also containing arcelin protein: Arc. IS, Arc.3S, and Arc. 5S. The Arc.5S, Arc. IS, and Arc.2 varieties expressed high antibiosis levels against the weevil; Arc. I and Arc3S expressed the same mechanism, but at lower levels. The occurrence of oviposition non-preference was also observed in Arc.5S and Arc. IS. The Arc.3 and Arc. 4 varieties expressed low feeding non-preference levels against A. obtectus. The expression of resistance in arcelin-bearing, wild or improved varieties was affected during the storage of seeds, and was high under some parameters but low in others. The results showed that addition of chemical resistance factors such as protein arcelin via genetic breeding may be beneficial in improving the performance of bean crops.

Tratamento de materiais contaminados com bifenilas policloradas (PCBS) via extração convencional e fluído supercrítico

The decontamination of the materials has been subject of some studies. One of the factors that it increases the pollution is the lack of responsibility in the discarding of toxic trash, as for example the presence of PCB (Polychlorinated Biphenyls) in the environment. In the Brazilian regulations, the material contaminated with PCB in concentrations higher than 50 ppm must be stored in special places or destroyed, usually by incineration in plasma furnace with dual steps. Due to high cost of the procedure, new methodologies of PCBs removal has been studied. The objective of this study was to develop an experimental methodology and analytical methodology for quantification of removal of PCBs through out the processes of extractions using supercritical fluid and Soxhlet method, also technical efficiency of the two processes of extraction, in the treatment of contaminated materials with PCBs. The materials studied were soils and wood, both were simulated contamination with concentration of 6.000, 33.000 and 60.000 mg of PCB/ kg of materials. Soxhlet extractions were performed using 100 ml of hexane, and temperature of 180 ºC. Extractions by fluid supercritical were performed at conditions of 200 bar, 70°C, and supercritical CO2 flow-rate of 3 g/min for 1-3 hours. The extracts obtained were quantified using Gas chromatography-mass spectrometry (GC/MS). The conventional extractions were made according to factorial experimental planning technique 22, with aim of study the influence of two variables of process extraction for the Soxhlet method: contaminant concentration and extraction time for obtain a maximum removal of PCB in the materials. The extractions for Soxhlet method were efficient for extraction of PCBs in soil and wood in both solvent studied (hexane and ethanol). In the experimental extraction in soils, the better efficient of removal of PCBs using ethanol as solvent was 81.3% than 95% for the extraction using hexane as solvent, for equal time of extraction. The results of the extraction with wood showed statistically it that there is not difference between the extractions in both solvent studied. The supercritical fluid extraction in the conditions studied showed better efficiency in the extraction of PCBs in the wood matrix than in soil, for two hours extractions the obtain percentual of 43.9 ± 0.5 % for the total of PCBs extracted in the soils against 95.1 ± 0,5% for the total of PCBs extracted in the wood. The results demonstrated that the extractions were satisfactory for both technical studied

Multi-population genetic algorithm to solve the synchronized and integrated two-level lot sizing and scheduling problem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Treatment of PVC using an alternative low energy ion bombardment procedure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New approach to ideal inductors stored energy nature

Nonlinear load compensation required the definition of new concepts of electric power. With basis on these new concepts the nature of the stored energy stored in ideal inductors is theoreticaly characterized in this work. Computer simulation and theory agree when applied to an isolated alternator.

Efficient procedure to evaluate electromagnetic transients on three-phase transmission lines

This paper presents a hybrid way mixing time and frequency domain for transmission lines modelling. The proposed methodology handles steady fundamental signal mixed with fast and slow transients, including impulsive and oscillatory behaviour. A transmission line model is developed based on lumped elements representation and state-space techniques. The proposed methodology represents an easy and practical procedure to model a three-phase transmission line directly in time domain, without the explicit use of inverse transforms. The proposed methodology takes into account the frequency-dependent parameters of the line, considering the soil and skin effects. In order to include this effect in the state matrices, a fitting method is applied. Furthermore the accuracy of proposed the developed model is verified, in frequency domain, by a simple methodology based on line distributed parameters and transfer function related to the input/output signals of the lumped parameters representation. In addition, this article proposes the use of a fast and robust analytic integration procedure to solve the state equations, enabling transient and steady-state simulations. The results are compared with those obtained by the commercial software Microtran (EMTP), taking into account a three-phase transmission line, typical in the Brazilian transmission system.