Migration and Wellbeing at the Lower Echelons of the Economy: A Study of Delhi Slums

This paper based on a primary survey of households (2004-05) in the slum clusters of Delhi examines whether migrants are likely to experience upward mobility in their place of destination or alternatively, if they merely transfer their poverty from rural areas to large cities. First, a simple bifurcation of population in terms of poor and non-poor sub-groups is examined along with the incidence of poverty across different categories of occupations and non-workers. Then, an explanation of the variations in per capita expenditure across households is provided, and a binomial logit model (poor/non-poor) is developed identifying the variables which raise (or reduce) the probability of being non-poor (or poor). Next, an estimate of the wellbeing (deprivation) index is derived from factor analysis of a large number of variables including demographic and economic aspects of households. Empirical findings suggest that while duration of migration and the wellbeing index do not have a definite relationship, migrant households who have been in the city for a very long time have a higher wellbeing index on average than those who migrated in the last ten years. This tends to support the view that migrants do not merely transfer rural poverty to urban areas, and further that population mobility yields improvement in the living standard, if only in the very long term. Implementation of "employment-cum-shelter" support schemes in the urban areas may contribute to their wellbeing.

Distribution System of China's Industrial Clusters: Case Study of Yiwu China Commodity City

This paper discusses the issue of upgrading industrial clusters from the perspective of external linkages. It is taken for granted that in most developing countries, due to the limited domestic market and poor traditional commercial networks, industrial clusters are able to upgrade only when they are involved in global value chains. However, the rise of China’s industrial clusters challenges this view. Historically, China has had a lot of industrial clusters with their own traditional commercial networks. This fact combined with its huge population resulted in the formation of a unique external linage to China’s industrial clusters after the socialist planning period ended. In concrete terms, since the 1980s, a traditional commercial institution . the transaction market . began to appear in most clusters. These markets within the clusters get connected to those in the cities due to interaction between traditional merchants and local governments. This has resulted in the formation of a powerful market network-based distribution system which has played a crucial role for China’s industrial clusters in responding to exploding domestic demand. This paper explains these features in detail, using Yiwu China Commodity City as a case study.

Domestic Market-based Industrial Cluster Development in Modern China

China’s huge domestic market is constantly expanding, and is low-end demand oriented and highly dispersed. The domestic market-based development of China’s industrial cluster, however, is not only a quantitative expansion, but has also been accompanied with remarkable qualitative upgrading. Specialized markets are a microcosm that clearly indicate this paradoxical phenomenon. By analyzing three typical cases of industrial clusters that have specialized markets, this paper will make the case that under modern China’s market conditions, the local public sector is the crucial driving force for upgrading industrial clusters, which organize complicated transactions, promote quality control, and stimulate the division of labor.

Local Firms in Latecomer Developing Countries amidst China's Rise -The case of Vietnam's motorcycle industry-

This paper examines the impact of China's recent rise on the development of local firms in latecomer developing countries. Based on a detailed analysis of Vietnam's motorcycle industry, the paper argues that China's impact may go beyond what a trade analysis suggests. Indeed, China's rise induced a dynamic transformation in the structure of value chains within Vietnam's motorcycle industry, bringing about far-reaching consequences on the development and upgrading trajectories of local firms. The implications of the case study for the wider "global value chain" approach is also discussed.

Clothing Export from sub-Saharan Africa : Impact on Poverty and Potential for Growth

Increases in clothing exports after 2000 signaled the first incidence of large-scale manufacturing exports from sub-Saharan Africa. Using firm-level information, this paper explores the potential of clothing exports for poverty reduction and further growth as seen in other low income countries. It shows that the garment exporting industries in Kenya and Madagascar have contributed poverty reduction in the short term by providing mass employment for female and less educated workers with wages beyond the poverty line. However, the long-term impact is not certain. High production costs and limited development of local firms weaken potential for further growth in the competitive world market. Upgrading of the market and improvement of efficiency are required to remain competitive for African industries, and governmental support for local participation are needed to facilitate technology transfer.

Competitiveness of the knitwear industry in Bangladesh : a study of industrial development amid global competition

This paper assesses the technical efficiency and profitability of the knitwear industry in Bangladesh taking into account the sector’s role in poverty reduction. While stochastic frontier analysis was invoked to assess technical efficiency, three alternative measures, namely the rate of return, total factor productivity and the Solow residual, were used to gauge the extent and determinants of the profitability of the industry based on firm-level data collected in 2001. The estimation results indicate the high profitability of the knitwear firms. In Bangladesh, the dynamic development of the industry has entailed great diversity in efficiency in comparison with the garment industries of other developing countries. While there is a significant scale effect in profitability and productivity, no supporting evidence was found for the positive impact on competitiveness of industrial upgrading in terms of usage of expensive machinery and vertical integration and industrial agglomeration.

Chapter 3 Knowledge Exchanges and Innovation in Connected Firms: Evidence from Upstream-Downstream Relationships

This paper proposes evidences for linking innovation and knowledge exchanges in developing economies towards a comprehensive theory of new economic geography in the knowledge based spatial economy. Firms which dispatched engineers to customers achieved more innovations than firms which did not. Mutual sharing of knowledge also stimulates innovations. A just-in-time relationship is effective for dealing with upgrading production process. But such strong complementarities with partners are not effective for product innovation.. These evidences support the hypothesis that face-to-face communication and complementarities among production linkages have different roles in knowledge creation.

Can FDI promote export diversification and sophistication of host countries? : dynamic panel system GMM analysis

Recent trade literature highlights the importance of export diversification and upgrading in fostering faster and sustainable economic growth. This study investigates the impact of FDI inflow and stock on the level of export diversification and sophistication in host country's export baskets. By utilizing the dynamic panel data model, we find that the five-year lagged FDI inflow correlates positively with both export diversification and sophistication, and FDI stock makes the positive contribution to export sophistication. These findings provide support for the possibility of successful capabilities transfer to and building by local firms. We also find that these positive impacts of FDI exist only in developing countries.

Platforms and firm capabilities : a study of emerging global value chains

This paper discusses globalization’s impact on production and distribution systems in emerging economies. On one hand, globalization has resulted in an increasing number of multinational corporations to adopt a platform strategy for their customers in emerging markets. On the other hand, developing countries have witnessed the integration of an increasing number of traditional marketplaces into a powerful distribution system, characterized as a specialized market system. Consequently, an unique industrial organization has developed in emerging economies, regarded as emerging global value chains (EGVCs). They comprise a large number of small firms together with a small number of large platform providers and display the "market" type general governance patterns. Firms in EGVCs are more likely to realize functional upgrading and grow into strong lead firms.

The middle-income trap from the viewpoint of trade structures

In this study, we try to elucidate the middle-income trap from the viewpoint of international trade. We conduct regression analyses on the relationship between income level and net export ratios for different types of goods for trapped and non-trapped samples separately. Our findings indicate that industrial upgrading appears to occur exactly as depicted by the flying-geese model for non-trapped countries while trapped countries tend to depend on the export of primary commodities, and industrialization appears to be driven by forward linkages to processed goods and a narrow base. The results of our analyses suggest that the middle-income trap is a form of Dutch disease or a 'resource curse' in the middle-income stage.

The supply chain in East Asia

East Asia is a major tea-consuming and -producing area; however, few studies have examined the East Asian tea industry from the perspective of the supply chain. Based on field and desktop studies of the tea markets in Taiwan and China, this paper provides an overview of each market together with detailed case studies. In this analysis, the characteristics of the tea industry and the main problems in the current supply chain in terms of governance, upgrading, and food safety and quality control are identified. This paper will help fill the gap in studies of the East Asian tea industry from the perspective of the supply chain.

Criterios para el dimensionamiento de redes de riego robustas frente a cambios en la alternativa de cultivos

En los años 50 y 60 del siglo XX se produjo en Europa un cambio en la concepción de los sistemas de riego, en los cuales se pasó del regadío por superficie al presurizado y con ello del riego por turnos al riego a la demanda. Las ventajas de este nuevo sistema de riego dieron lugar a una gran expansión de las redes colectivas de riego a presión, especialmente en los países del arco mediterráneo y del Sur de Europa (Francia, España, Italia, Portugal y Grecia). Desde entonces el riego presurizado a la demanda ha tenido una evolución permanente, en la que han mejorado los equipos y las técnicas de aplicación del riego, siempre con una clara orientación hacía el incremento de la productividad. Esta evolución unida a los vaivenes de los mercados, al abaratamiento de los transportes y la globalización, y a las subvenciones agrícolas, ha propiciado que las alternativas de cultivos previstas hayan sufrido cambios. El cambio de la alternativa de cultivos hacia otros más exigentes desde el punto de vista de las necesidades hídricas tiene como consecuencia el aumento de los consumos, circunstancia para cual debe estar capacitada la red. Otros fenómenos como el cambio climático, de amplio interés a día de hoy, presentan algunos escenarios en lo que se prevé un incremento de las temperaturas que unido a una reducción en las precipitaciones, supondría también que se elevarían las necesidades de riego de los cultivos. Todas estas circunstancias deben ser contempladas en la redacción de los proyectos de transformación de nuevas zonas regables y en los de modernización de las existentes. Las redes de riego deben estar dimensionadas para poder atender dichos incrementos de consumo. La fortaleza de la red para atender variaciones en las demandas de agua se convierte por tanto en una premisa del proyecto. Dicha fortaleza se puede conseguir de formas diferentes y a costos distintos, puesto que en el proceso de dimensionamiento estadístico de los caudales circulantes en punta de campaña intervienen muchas variables y parámetros de riego. En la presente tesis doctoral se analiza en detalle el estado del arte en la materia, se efectúa un análisis de la función específica y la influencia en el cálculo de cada uno de los parámetros, se establece un procedimiento de actuación que optimice el dimensionamiento de la red colectiva para que ésta disponga de la robustez necesaria para hacer frente a incrementos potenciales de consumo de agua sobre la previsiones de base del proyecto y se establecen los criterios, rangos y combinaciones de parámetros que permiten dotar a la red de la fortaleza necesaria de la manera más eficiente posible. During the 1950s and 1960s the design of irrigation systems in Europe underwent change. Traditional surface irrigation was replaced by pressure irrigation, with the delivery method shifting from a scheduled type to an on-demand one. The advantages obtained with this new system led to a significant development of on-demand pressurised irrigation districts, especially in the Southern countries (France, Greece, Italy, Portugal and Spain). On-demand pressurised irrigation has since evolved in a continuous manner in which, with the purpose of gaining productivity, on-farm equipment and automation instruments have seen improvements. Such developments, along with market fluctuations, reductions in transport costs, globalisation and the influence of agricultural subsidies, have resulted in changes in the crop pattern. The farming of new crops may require more water and the consumption may become greater. In addition to this, other phenomena, such as the frequently-debated effects of climate change, reveal scenarios in which an increase in temperatures and the accompanying reductions in rainfall are expected. One consequence of this would be an increase in irrigation requirements and subsequent impact on irrigation networks. All such circumstances should be taken into account in both the design of new irrigation districts and the upgrading of the existing ones. Irrigation networks should be of a size that allows them to meet increases in consumption. The robustness of the network, defined as its capacity to absorb increments in water requirements, becomes a key point to be taken into account in the design phase. Given that there are several parameters that influence the calculus of design flows, such robustness may be obtained in different ways and at varying costs. In the context of this, the thesis reviews the state of the art, analyses the role and influence of each parameter, establishes a procedure for checking the design and robustness of on-demand irrigation networks, and sets design criteria for selecting the most effective range and combination of parameters that provide the network with such robustness.

Building the qualification and a skill development program within the ENEN-III European Project

The ENEN III project covers the structuring, organization, coordination and implementation of training schemes in cooperation with local, national and international training organizations, to provide training to professionals active in nuclear organizations or their contractors and sub-contractors. The training schemes provide a portfolio of courses, training sessions, seminars, and workshops for continuous learning for upgrading knowledge and developing skills. The training schemes allow individuals to acquire qualifications and skills, as required by the specific positions in the nuclear sector which will be documented in a training passport. The essence of such passport is to be recognized within the EU by the whole nuclear sector which provides mobility to the individual looking for employment and an EU wide recruitment field for the nuclear employers.

Facade typologies as a tool for selecting refurbishment measures for the Spanish residential building stock

Today, the building sector alone accounts for 40% of the total energy consumption in the European Union (EU). In most EU member states, about 70–90% of the buildings were constructed at least 20 years ago. Due to this, these buildings have a worse energy efficiency behavior than the new ones that comply with current regulations. As a consequence, acting on the existing building stock is needed, developing special methods on assessment and advice in order to reduce the total energy consumption. This article addresses a procedure allowing the classification and characterization of existing buildings facades. It can help researchers to achieve in-depth knowledge of the facades construction and therefore knowing their thermal behavior. Once knowing that, the most appropriate upgrading strategies can be established with the purpose of reducing the energy demand. Furthermore, the classified facade typologies have been verified, complying with current and future Spanish regulations and according to the results obtained, a series of upgrading strategies based on the opaque part and those in the translucent part, have been proposed. As a conclusion, this procedure helps us to select the most appropriate improvement measures for each type of facade in order to comply with current and future Spanish regulations. This proposed method has been tested in a specific neighborhood of Madrid, in a selected period of time, between 1950 and 1980, but it could be applicable to any other city.

Effect of conservation tillage on soil physical properties, in-situ rainwater harvesting, and erosion control in arid and semi-arid regions

La escasez del agua en las regiones áridas y semiáridas se debe a la escasez de precipitaciones y la distribución desigual en toda la temporada, lo que hace de la agricultura de secano una empresa precaria. Un enfoque para mejorar y estabilizar el agua disponible para la producción de cultivos en estas regiones es el uso de tecnologías de captación de agua de lluvia in situ y su conservación. La adopción de los sistemas de conservación de la humedad del suelo in situ, tales como la labranza de conservación, es una de las estrategias para mejorar la gestión de la agricultura en zonas áridas y semiáridas. El objetivo general de esta tesis ha sido desarrollar una metodología de aplicación de labranza de depósito e investigar los efectos a corto plazo sobre las propiedades físicas del suelo de las diferentes prácticas de cultivo que incluyen labranza de depósito: (reservoir tillage, RT), la laboreo mínimo: (minimum tillage, MT), la no laboreo: (zero tillage, ZT) y laboreo convencional: (conventional tillage, CT) Así como, la retención de agua del suelo y el control de la erosión del suelo en las zonas áridas y semiáridas. Como una primera aproximación, se ha realizado una revisión profunda del estado de la técnica, después de la cual, se encontró que la labranza de depósito es un sistema eficaz de cosecha del agua de lluvia y conservación del suelo, pero que no ha sido evaluada científicamente tanto como otros sistemas de labranza. Los trabajos experimentales cubrieron tres condiciones diferentes: experimentos en laboratorio, experimentos de campo en una región árida, y experimentos de campo en una región semiárida. Para investigar y cuantificar el almacenamiento de agua a temperatura ambiente y la forma en que podría adaptarse para mejorar la infiltración del agua de lluvia recolectada y reducir la erosión del suelo, se ha desarrollado un simulador de lluvia a escala de laboratorio. Las características de las lluvias, entre ellas la intensidad de las precipitaciones, la uniformidad espacial y tamaño de la gota de lluvia, confirmaron que las condiciones naturales de precipitación son simuladas con suficiente precisión. El simulador fue controlado automáticamente mediante una válvula de solenoide y tres boquillas de presión que se usaron para rociar agua correspondiente a diferentes intensidades de lluvia. Con el fin de evaluar el método de RT bajo diferentes pendientes de superficie, se utilizaron diferentes dispositivos de pala de suelo para sacar un volumen idéntico para hacer depresiones. Estas depresiones se compararon con una superficie de suelo control sin depresión, y los resultados mostraron que la RT fue capaz de reducir la erosión del suelo y la escorrentía superficial y aumentar significativamente la infiltración. Luego, basándonos en estos resultados, y después de identificar la forma adecuada de las depresiones, se ha diseñado una herramienta combinada (sistema integrado de labranza de depósito (RT)) compuesto por un arado de una sola línea de chisel, una sola línea de grada en diente de pico, sembradora modificada, y rodillo de púas. El equipo fue construido y se utiliza para comparación con MT y CT en un ambiente árido en Egipto. El estudio se realizó para evaluar el impacto de diferentes prácticas de labranza y sus parámetros de funcionamiento a diferentes profundidades de labranza y con distintas velocidades de avance sobre las propiedades físicas del suelo, así como, la pérdida de suelo, régimen de humedad, la eficiencia de recolección de agua, y la productividad de trigo de invierno. Los resultados indicaron que la RT aumentó drásticamente la infiltración, produciendo una tasa que era 47.51% más alta que MT y 64.56% mayor que la CT. Además, los resultados mostraron que los valores más bajos de la escorrentía y pérdidas de suelos 4.91 mm y 0.65 t ha-1, respectivamente, se registraron en la RT, mientras que los valores más altos, 11.36 mm y 1.66 t ha-1, respectivamente, se produjeron en el marco del CT. Además, otros dos experimentos de campo se llevaron a cabo en ambiente semiárido en Madrid con la cebada y el maíz como los principales cultivos. También ha sido estudiado el potencial de la tecnología inalámbrica de sensores para monitorizar el potencial de agua del suelo. Para el experimento en el que se cultivaba la cebada en secano, se realizaron dos prácticas de labranza (RT y MT). Los resultados mostraron que el potencial del agua del suelo aumentó de forma constante y fue consistentemente mayor en MT. Además, con independencia de todo el período de observación, RT redujo el potencial hídrico del suelo en un 43.6, 5.7 y 82.3% respectivamente en comparación con el MT a profundidades de suelo (10, 20 y 30 cm, respectivamente). También se observaron diferencias claras en los componentes del rendimiento de los cultivos y de rendimiento entre los dos sistemas de labranza, el rendimiento de grano (hasta 14%) y la producción de biomasa (hasta 8.8%) se incrementaron en RT. En el experimento donde se cultivó el maíz en regadío, se realizaron cuatro prácticas de labranza (RT, MT, ZT y CT). Los resultados revelaron que ZT y RT tenían el potencial de agua y temperatura del suelo más bajas. En comparación con el tratamiento con CT, ZT y RT disminuyó el potencial hídrico del suelo en un 72 y 23%, respectivamente, a la profundidad del suelo de 40 cm, y provocó la disminución de la temperatura del suelo en 1.1 y un 0.8 0C respectivamente, en la profundidad del suelo de 5 cm y, por otro lado, el ZT tenía la densidad aparente del suelo y resistencia a la penetración más altas, la cual retrasó el crecimiento del maíz y disminuyó el rendimiento de grano que fue del 15.4% menor que el tratamiento con CT. RT aumenta el rendimiento de grano de maíz cerca de 12.8% en comparación con la ZT. Por otra parte, no hubo diferencias significativas entre (RT, MT y CT) sobre el rendimiento del maíz. En resumen, según los resultados de estos experimentos, se puede decir que mediante el uso de la labranza de depósito, consistente en realizar depresiones después de la siembra, las superficies internas de estas depresiones se consolidan de tal manera que el agua se mantiene para filtrarse en el suelo y por lo tanto dan tiempo para aportar humedad a la zona de enraizamiento de las plantas durante un período prolongado de tiempo. La labranza del depósito podría ser utilizada como un método alternativo en regiones áridas y semiáridas dado que retiene la humedad in situ, a través de estructuras que reducen la escorrentía y por lo tanto puede resultar en la mejora de rendimiento de los cultivos. ABSTRACT Water shortage in arid and semi-arid regions stems from low rainfall and uneven distribution throughout the season, which makes rainfed agriculture a precarious enterprise. One approach to enhance and stabilize the water available for crop production in these regions is to use in-situ rainwater harvesting and conservation technologies. Adoption of in-situ soil moisture conservation systems, such as conservation tillage, is one of the strategies for upgrading agriculture management in arid and semi-arid environments. The general aim of this thesis is to develop a methodology to apply reservoir tillage to investigate the short-term effects of different tillage practices including reservoir tillage (RT), minimum tillage (MT), zero tillage (ZT), and conventional tillage (CT) on soil physical properties, as well as, soil water retention, and soil erosion control in arid and semi-arid areas. As a first approach, a review of the state of the art has been done. We found that reservoir tillage is an effective system of harvesting rainwater and conserving soil, but it has not been scientifically evaluated like other tillage systems. Experimental works covered three different conditions: laboratory experiments, field experiments in an arid region, and field experiments in a semi-arid region. To investigate and quantify water storage from RT and how it could be adapted to improve infiltration of harvested rainwater and reduce soil erosion, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to different rainfall intensities. In order to assess the RT method under different surface slopes, different soil scooping devices with identical volume were used to create depressions. The performance of the soil with these depressions was compared to a control soil surface (with no depression). Results show that RT was able to reduce soil erosion and surface runoff and significantly increase infiltration. Then, based on these results and after selecting the proper shape of depressions, a combination implement integrated reservoir tillage system (integrated RT) comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and used to compared to MT and CT in an arid environment in Egypt. The field experiments were conducted to evaluate the impact of different tillage practices and their operating parameters at different tillage depths and different forward speeds on the soil physical properties, as well as on runoff, soil losses, moisture regime, water harvesting efficiency, and winter wheat productivity. Results indicated that the integrated RT drastically increased infiltration, producing a rate that was 47.51% higher than MT and 64.56% higher than CT. In addition, results showed that the lowest values of runoff and soil losses, 4.91 mm and 0.65 t ha-1 respectively, were recorded under the integrated RT, while the highest values, 11.36 mm and 1.66 t ha -1 respectively, occurred under the CT. In addition, two field experiments were carried out in semi-arid environment in Madrid with barley and maize as the main crops. For the rainfed barley experiment, two tillage practices (RT, and MT) were performed. Results showed that soil water potential increased quite steadily and were consistently greater in MT and, irrespective of the entire observation period, RT decreased soil water potential by 43.6, 5.7, and 82.3% compared to MT at soil depths (10, 20, and 30 cm, respectively). In addition, clear differences in crop yield and yield components were observed between the two tillage systems, grain yield (up to 14%) and biomass yield (up to 8.8%) were increased by RT. For the irrigated maize experiment, four tillage practices (RT, MT, ZT, and CT) were performed. Results showed that ZT and RT had the lowest soil water potential and soil temperature. Compared to CT treatment, ZT and RT decreased soil water potential by 72 and 23% respectively, at soil depth of 40 cm, and decreased soil temperature by 1.1 and 0.8 0C respectively, at soil depth of 5 cm. Also, ZT had the highest soil bulk density and penetration resistance, which delayed the maize growth and decreased the grain yield that was 15.4% lower than CT treatment. RT increased maize grain yield about 12.8% compared to ZT. On the other hand, no significant differences among (RT, MT, and CT) on maize yield were found. In summary, according to the results from these experiments using reservoir tillage to make depressions after seeding, these depression’s internal surfaces are consolidated in such a way that the water is held to percolate into the soil and thus allowing time to offer moisture to the plant rooting zone over an extended period of time. Reservoir tillage could be used as an alternative method in arid and semi-arid regions and it retains moisture in-situ, through structures that reduce runoff and thus can result in improved crop yields.