Effect of selenization conditions on the growth and properties of Cu2ZnSn(S,Se)4 thin films

The opto-electronic properties of copper zinc tin sulfide can be tuned to achieve better cell efficiencies by controlled incorporation of selenium. In this paper we report the growth of Cu2ZnSn(S,Se)4 (CZTSSe) using a hybrid process involving the sequential evaporation of Zn and sputtering of the sulfide precursors of Cu and Sn, followed by a selenization step. Two approaches for selenization were followed, one using a tubular furnace and the other using a rapid thermal processor. The effects of annealing conditions on the morphological and structural properties of the films were investigated. Scanning electron microscopy and energy dispersive spectroscopy were employed to investigate the morphology and composition of the films. Structural analyses were done using X-ray diffraction (XRD) and Raman spectroscopy. Structural analyses revealed the formation of CZTSSe. This study shows that regardless of the selenization method a temperature above 450 °C is required for conversion of precursors to a compact CZTSSe layer. XRD and Raman analysis suggests that the films selenized in the tubular furnace are selenium rich whereas the samples selenized in the rapid thermal processor have higher sulfur content.

Avaliação de estado de uma escultura de bronze: “Jean d’Aire” de Auguste Rodin

Dissertação para a obtenção do Grau de Mestre em Conservação e Restauro, Especialização em Metais

Produção de biodiesel por transesterificação de óleos vegetais sobre guanidinas ancoradas em suportes sólidos

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Transmissão do Citomegalovírus no Leite Materno nos Recém-Nascidos Pré-Termos ou Muito Baixo Peso

A infecção pós-natal a citomegalovírus (CMV) nos recém-nascidos pré termos (RNPT) ou muito baixo peso (MBP) pode cursar com doença grave. Para avaliar a transmissão do CMV no leite materno, no RNPT ou MBP, a infecção e o prognóstico a longo prazo, efectuamos uma pesquisa online no motor de busca OVID (consultando a Pubmed, Medline e a Medscape) de Janeiro de 1982 a Agosto de 2011. Os estudos que incluíam a infecção congénita foram excluídos. Incluímos cerca de 30 estudos para análise. A taxa de infecção materna assintomática é elevada (média 81%) e a transmissão do CMV no LM varia entre 66-97,2% das mães CMV-IgC positivas com subsequente positividade nos RN entre 5.7 – 58.6%. Sendo as taxas de infecção sintomática (0-34,5%) e/ou de doença grave (0-13,8%) muito variáveis de estudo para estudo. A longo prazo pode cursar com perturbações do neurodesenvolvimento e morbilidade importantes, sem compromisso auditivo. Em relação à inactivação do CMV pode-se optar por pasteurizar ou congelar o LM, com eficácia/benefício/custo variável. As recomendações actuais são variáveis e pouco directivas, deixando nalguns casos ao critério individual.

Monitorização e otimização da deposição de filmes de óxidos mistos por RF-sputtering

Dissertação para obtenção do Grau de Mestre em Engenharia Física

Lime-metakaolin mortars for historical buildings repair: study of the hardening reaction

International Conference Durable Structures: from construction to rehabilitation. Lisbon, LNEC, 31 May-1 June 2012

Caracterização de caldas de cal hidráulica natural com metacaulino para consolidação de alvenarias antigas

Dissertação para obtenção do grau Mestre em Engenharia Civil – Perfil de Construção

Development of chitosan-based microparticles for pulmonary drug delivery

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Preparação e caracterização de VPO’s e sua aplicação na reacção de desidrogenação oxidativa do propano

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Influence of curing conditions in lime-metakaolin blended mortars – A mineralogical and mechanical study

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland

Physical and chemical assessment of lime–metakaolin mortars: Influence of binder:aggregate ratio

Cement & Concrete Composites 45 (2014) 264–271

Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions

Construction and Building Materials 51 (2014) 287–294

Introducing Mobile Money in Rural Mozambique: Evidence from a Field Experiment*

The limitations of access to finance in Africa, together with the recent boom in cell phone use in that continent, created high expectations regarding the introduction of mobile money in many African countries. The success story of M-PESA in Kenya raised the bar further. We designed and conducted a field experiment to assess the impact of randomized mobile money dissemination in rural Mozambique. For this purpose we benefit from the fact that mobile money was only recently launched in the country, allowing for the identification of a pure control group. This paper reports on the first results of this ongoing project after the first wave of dissemination efforts in rural locations, which included the recruitment and training of mobile money agents, community meetings and theaters, as well as individual rural campaigning. Administrative and behavioral data both show clear adherence to the services in the treatment group. Financial literacy and trust outcomes are also positively affected by the treatment. We present behavioral evidence that the marginal willingness to remit was increased by the availability of mobile money. Finally, we observe a tendency for mobile money to substitute traditional alternatives for both savings and remittances.

Directed Giving: Evidence from an Inter-Household Transfer Experiment*

We investigate the determinants of giving in a lab-in-the-field experiment with large stakes. Study participants in urban Mozambique play dictator games where their counterpart is the closest person to them outside their household. Dictators share more with counterparts when they have the option of giving in kind (in the form of goods), compared to giving that must be in cash. Qualitative post-experiment responses suggest that this effect is driven by a desire to control how recipients use gifted resources. Standard economic determinants such as the rate of return to giving and the size of the endowment also affect giving, but the effects of even large changes in these determinants are significantly smaller than the effect of the in-kind option. Our results support theories of giving where the utility of givers depends on the composition (not just the level) of gift-recipient expenditures, and givers thus seek control over transferred resources.

Development of composite particles for pulmonary delivery

In this work, biocompatible and biodegradable poly(D-L-lactide-co-glycolide) (PLGA) microparticles with the potential for use as a controlled release system of vaccines and other drugs to the lung were manufactured using supercritical CO2, through the Supercritical Assisted Atomization (SAA) technique. After performing a controlled variance in production parameters (temperature, pressure, CO2/solution flow ratio) PLGA microparticles were characterized and later used to encapsulate active pharmaceutical ingredients (API). Bovine serum albumin (BSA) was chosen as model protein and vaccine, while sildenafil was the chosen drug to treat pulmonary artery hypertension and their effect on the particles characteristics was evaluated. All the produced formulations were characterized in relation to their morphology (Morphologi G3 and scanning electronic microscopy (SEM)), to their physical-chemical properties (X-ray diffraction (XRD, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR)) and aerodynamic performance using an in vitro aerosolization study – Andersen cascade impactor (ACI) - to obtain data such as the fine particle fraction (FPF) and the mass median aerodynamic diameter (MMAD). Furthermore, pharmacokinetic, biodegradability and biocompatibility tests were performed in order to verify the particle suitability for inhalation. The resulting particles showed aerodynamic diameters between the 3 and 5 μm, yields up to 58% and FPF percentages rounding the 30%. Taken as a whole, the produced microparticles do present the necessary requests to make them appropriate for pulmonary delivery.