FORMAÇÃO DOCENTE E ENSINO SUPERIOR A DISTÂNCIA: TRANSIÇÃO PARADIGMÁTICA E OS IMPACTOS E CONTRIBUIÇÕES DAS TECNOLOGIAS DE INFORMAÇÃO E COMUNICAÇÃO

O século XXI trouxe profundas modificações na organização das sociedades e consequentemente no mundo do trabalho no âmbito da educação. O crescimento exponencial da dinâmica da comunicação nas sociedades possibilita a multiplicação generalizada de visões de mundo, a tecnologia é um agente de mudança e as inovações tecnológicas podem resultar em uma revolucionária quebra de paradigma educacional. Diante dos impasses de um mundo globalizado, em constante mutação cultural, surgem novas possibilidades de mediações que geram diferentes perspectivas para os processos educativos com a introdução das Tecnologias de Informação e Comunicação (TICs) e da Educação a Distância (EaD). Por esta razão, a Formação Docente é pesquisada tendo como objetivo analisar os impactos e as contribuições que as tecnologias trazem para este campo, especialmente no curso de Pedagogia, considerando uma experiência em EaD e sua relação com o curso na modalidade presencial a partir dos pressupostos norteadores do Projeto Pedagógico Institucional (PPI) na instituição pesquisada. Foi relevante perceber no decorrer da pesquisa bibliográfica e do estudo de campo que as duas modalidades apóiam-se na concepção de educação que está subjacente e que orienta as escolhas teórico-metodológicas adotadas pela instituição no seu PPI. A educação a distância possibilita a construção de um ambiente de aprendizagem mediado pelas TICs e novas compreensões sobre o processo de ensinar e aprender. O estudo mostra que a formação docente nesta modalidade deve estar articulada com o processo educativo e ter como eixo a concepção de um sujeito capaz de estabelecer novas formas de expressão e conhecimentos para trabalhar em uma educação do futuro. Portanto, é necessário pensar na Intencionalidade de sua formação, de modo a capacitá-lo com visão pedagógica crítica e objetivando que seja capaz de intervir no desenvolvimento educacional como um intelectual transformador.(AU)

Interactions within heterogeneous systems of uncontrolled rectifiers for aircraft electrical power systems

There is an increase in the use of multi-pulse, rectifier-fed motor-drive equipment on board more-electric aircraft. Motor drives with feedback control appear as constant power loads to the rectifiers, which can cause instability of the DC filter capacitor voltage at the output of the rectifier. This problem can be exacerbated by interactions between rectifiers that share a common source impedance. In order that such a system can be analysed, there is a need for average, dynamic models of systems of rectifiers. In this study, an efficient, compact method for deriving the approximate, linear, large-signal, average models of two heterogeneous systems of rectifiers, which are fed from a common source impedance, is presented. The models give insight into significant interaction effects that occur between the converters, and that arise through the shared source impedance. First, a 6-pulse and doubly wound, transformer-fed, 12-pulse rectifier system is considered, followed by a 6-pulse and autotransformer-fed, 12-pulse rectifier system. The system models are validated against detailed simulations and laboratory prototypes, and key characteristics of the two system types are compared.

Back from the future:the second chance in the past of aller + infinitive

Typological studies (Bybee et al. 1994, Dahl 2000, Bourdin 2008 among many others) have shown a tendency for spatial elements (such as movement verbs) to grammaticalise into temporal expressions. The periphrasis made of aller + infinitive has been very productive in Romance languages. If in French, Spanish or Portuguese, it refers to future, it refers to a simple past in Catalan. fr.: je vais aller au cinéma esp.: voy a ir al cine pt. Vou ira o cine cat.: vaig anar al cine Barceló & Bres (2005:168) indicate that, In French, «vers le XVIème siècle, […] la périphrase a brièvement fonctionné comme un temps du passé (alors même que l’emploi comme temps du futur émergeait)»: (1) Sur ces propos, firent leur accord et, en regardant le lieu le plus propre pour faire cette belle œuvre, elle va dire qu’elle n’en savait point de meilleure ni plus loin de tout soupçon, qu’une petite maison qui était dedans le parc, où il y avait chambre et lit tout à propos. (Marguerite de Navarre, L’Heptaméron) The future value took over so much so that Damourette & Pichon (1911-1936 :117) claimed the past value had disappeared»: Un second tour, encore plus aberrant, n’a plus, que nous sachions, aucune position en pays d’Oui. Nous voulons parler de l’expression d’un passé au moyen de l’auxiliaire aller, suivi de l’infinitif. Ce tour a eu une grande fortune dans le provençal ancien et le catalan […] En français, on n’en trouve que des traces, notamment du XIVe au XVIe siècles . Ex.:[…] Adoncques s’arrêtèrent le conte et Raimondin soubz un grand arbre ; lors va dire le conte à Raimondin: […]. Et Raimondin va lui dire : Sire, ce qu’il vous plaira. That allegedly extinct use is nonetheless alive and kicking in Contemporary French. Larreya (2005:349)notes that it is « très courant dans les récits – en particulier dans les récits oraux» and it is also found in newspaper language as shown by this except from an obituary for Loulou Gasté (Le Monde 1995): (2) Celle-ci se déroule aux Editions Micro, où il a un bureau. Séduit par la jeune interprète, il commence à lui écrire des chansons sur mesure et leur complicité va mettre cinq ans à se transformer en amour. Au début de leur rencontre, Loulou est neurasthénique parce qu’il vient de divorcer et la future Line, exclusivement préoccupée par son métier, ne songe à rien d’autre. Line et Loulou vont rattraper le temps perdu et créer ensemble un millier de petites chansons dont la plupart sont devenues immortelles. Jusqu’à ces derniers mois, il ne va pas se passer une journée sans que Loulou s’empare de sa guitare pour créer un refrain. Would we be witnessing a linguistic resurrection? The same structure seems therefore to have grammaticalised in diverging and even diametrically opposite ways in different Romance languages. In this talk, we shall try to explain how the phrase aller + infinitive is able to function both as a future and a past. We will especially concentrate on the case of contemporary French where, while the future interpretation has obtained the status of tense as futur proche or périphrastique, a past interpretation is now commonplace. Our reflection will be supported by a personal corpus of authentic examples.

Modelling of induction motors for system faults and transient stability studies

The research carried out in this thesis was mainly concerned with the effects of large induction motors and their transient performance in power systems. Computer packages using the three phase co-ordinate frame of reference were developed to simulate the induction motor transient performance. A technique using matrix algebra was developed to allow extension of the three phase co-ordinate method to analyse asymmetrical and symmetrical faults on both sides of the three phase delta-star transformer which is usually required when connecting large induction motors to the supply system. System simulation, applying these two techniques, was used to study the transient stability of a power system. The response of a typical system, loaded with a group of large induction motors, two three-phase delta-star transformers, a synchronous generator and an infinite system was analysed. The computer software developed to study this system has the advantage that different types of fault at different locations can be studied by simple changes in input data. The research also involved investigating the possibility of using different integrating routines such as Runge-Kutta-Gill, RungeKutta-Fehlberg and the Predictor-Corrector methods. The investigation enables the reduction of computation time, which is necessary when solving the induction motor equations expressed in terms of the three phase variables. The outcome of this investigation was utilised in analysing an introductory model (containing only minimal control action) of an isolated system having a significant induction motor load compared to the size of the generator energising the system.

Simulation of power station protection equipment

Computer programs have been developed to enable the coordination of fuses and overcurrent relays for radial power systems under estimated fault current conditions. The grading curves for these protection devices can be produced on a graphics terminal and a hard copy can be obtained. Additional programs have also been developed which could be used to assess the validity of relay settings (obtained under the above conditions) when the transient effect is included. Modelling of a current transformer is included because transformer saturation may occur if the fault current is high, and hence the secondary current is distorted. Experiments were carried out to confirm that distorted currents will affect the relay operating time, and it is shown that if the relay current contains only a small percentage of harmonic distortion, the relay operating time is increased. System equations were arranged to enable the model to predict fault currents with a generator transformer incorporated in the system, and also to include the effect of circuit breaker opening, arcing resistance, and earthing resistance. A fictitious field winding was included to enable more accurate prediction of fault currents when the system is operating at both lagging and leading power factors prior to the occurrence of the fault.

Developments and extensions of Roth's method of double Fourier series with applications to the solution of electromagnetic field problems

The first part of the thesis compares Roth's method with other methods, in particular the method of separation of variables and the finite cosine transform method, for solving certain elliptic partial differential equations arising in practice. In particular we consider the solution of steady state problems associated with insulated conductors in rectangular slots. Roth's method has two main disadvantages namely the slow rate of con­vergence of the double Fourier series and the restrictive form of the allowable boundary conditions. A combined Roth-separation of variables method is derived to remove the restrictions on the form of the boundary conditions and various Chebyshev approximations are used to try to improve the rate of convergence of the series. All the techniques are then applied to the Neumann problem arising from balanced rectangular windings in a transformer window. Roth's method is then extended to deal with problems other than those resulting from static fields. First we consider a rectangular insulated conductor in a rectangular slot when the current is varying sinusoidally with time. An approximate method is also developed and compared with the exact method.The approximation is then used to consider the problem of an insulated conductor in a slot facing an air gap. We also consider the exact method applied to the determination of the eddy-current loss produced in an isolated rectangular conductor by a transverse magnetic field varying sinusoidally with time. The results obtained using Roth's method are critically compared with those obtained by other authors using different methods. The final part of the thesis investigates further the application of Chebyshdev methods to the solution of elliptic partial differential equations; an area where Chebyshev approximations have rarely been used. A poisson equation with a polynomial term is treated first followed by a slot problem in cylindrical geometry.

Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector

Guest editorial Ali Emrouznejad is a Senior Lecturer at the Aston Business School in Birmingham, UK. His areas of research interest include performance measurement and management, efficiency and productivity analysis as well as data mining. He has published widely in various international journals. He is an Associate Editor of IMA Journal of Management Mathematics and Guest Editor to several special issues of journals including Journal of Operational Research Society, Annals of Operations Research, Journal of Medical Systems, and International Journal of Energy Management Sector. He is in the editorial board of several international journals and co-founder of Performance Improvement Management Software. William Ho is a Senior Lecturer at the Aston University Business School. Before joining Aston in 2005, he had worked as a Research Associate in the Department of Industrial and Systems Engineering at the Hong Kong Polytechnic University. His research interests include supply chain management, production and operations management, and operations research. He has published extensively in various international journals like Computers & Operations Research, Engineering Applications of Artificial Intelligence, European Journal of Operational Research, Expert Systems with Applications, International Journal of Production Economics, International Journal of Production Research, Supply Chain Management: An International Journal, and so on. His first authored book was published in 2006. He is an Editorial Board member of the International Journal of Advanced Manufacturing Technology and an Associate Editor of the OR Insight Journal. Currently, he is a Scholar of the Advanced Institute of Management Research. Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector This special issue aims to focus on holistic, applied research on performance measurement in energy sector management and for publication of relevant applied research to bridge the gap between industry and academia. After a rigorous refereeing process, seven papers were included in this special issue. The volume opens with five data envelopment analysis (DEA)-based papers. Wu et al. apply the DEA-based Malmquist index to evaluate the changes in relative efficiency and the total factor productivity of coal-fired electricity generation of 30 Chinese administrative regions from 1999 to 2007. Factors considered in the model include fuel consumption, labor, capital, sulphur dioxide emissions, and electricity generated. The authors reveal that the east provinces were relatively and technically more efficient, whereas the west provinces had the highest growth rate in the period studied. Ioannis E. Tsolas applies the DEA approach to assess the performance of Greek fossil fuel-fired power stations taking undesirable outputs into consideration, such as carbon dioxide and sulphur dioxide emissions. In addition, the bootstrapping approach is deployed to address the uncertainty surrounding DEA point estimates, and provide bias-corrected estimations and confidence intervals for the point estimates. The author revealed from the sample that the non-lignite-fired stations are on an average more efficient than the lignite-fired stations. Maethee Mekaroonreung and Andrew L. Johnson compare the relative performance of three DEA-based measures, which estimate production frontiers and evaluate the relative efficiency of 113 US petroleum refineries while considering undesirable outputs. Three inputs (capital, energy consumption, and crude oil consumption), two desirable outputs (gasoline and distillate generation), and an undesirable output (toxic release) are considered in the DEA models. The authors discover that refineries in the Rocky Mountain region performed the best, and about 60 percent of oil refineries in the sample could improve their efficiencies further. H. Omrani, A. Azadeh, S. F. Ghaderi, and S. Abdollahzadeh presented an integrated approach, combining DEA, corrected ordinary least squares (COLS), and principal component analysis (PCA) methods, to calculate the relative efficiency scores of 26 Iranian electricity distribution units from 2003 to 2006. Specifically, both DEA and COLS are used to check three internal consistency conditions, whereas PCA is used to verify and validate the final ranking results of either DEA (consistency) or DEA-COLS (non-consistency). Three inputs (network length, transformer capacity, and number of employees) and two outputs (number of customers and total electricity sales) are considered in the model. Virendra Ajodhia applied three DEA-based models to evaluate the relative performance of 20 electricity distribution firms from the UK and the Netherlands. The first model is a traditional DEA model for analyzing cost-only efficiency. The second model includes (inverse) quality by modelling total customer minutes lost as an input data. The third model is based on the idea of using total social costs, including the firm’s private costs and the interruption costs incurred by consumers, as an input. Both energy-delivered and number of consumers are treated as the outputs in the models. After five DEA papers, Stelios Grafakos, Alexandros Flamos, Vlasis Oikonomou, and D. Zevgolis presented a multiple criteria analysis weighting approach to evaluate the energy and climate policy. The proposed approach is akin to the analytic hierarchy process, which consists of pairwise comparisons, consistency verification, and criteria prioritization. In the approach, stakeholders and experts in the energy policy field are incorporated in the evaluation process by providing an interactive mean with verbal, numerical, and visual representation of their preferences. A total of 14 evaluation criteria were considered and classified into four objectives, such as climate change mitigation, energy effectiveness, socioeconomic, and competitiveness and technology. Finally, Borge Hess applied the stochastic frontier analysis approach to analyze the impact of various business strategies, including acquisition, holding structures, and joint ventures, on a firm’s efficiency within a sample of 47 natural gas transmission pipelines in the USA from 1996 to 2005. The author finds that there were no significant changes in the firm’s efficiency by an acquisition, and there is a weak evidence for efficiency improvements caused by the new shareholder. Besides, the author discovers that parent companies appear not to influence a subsidiary’s efficiency positively. In addition, the analysis shows a negative impact of a joint venture on technical efficiency of the pipeline company. To conclude, we are grateful to all the authors for their contribution, and all the reviewers for their constructive comments, which made this special issue possible. We hope that this issue would contribute significantly to performance improvement of the energy sector.

VSC topology comparison for STATCOM application under unbalanced conditions

This paper compares the performance of four different power electronic converter topologies, which have been proposed for STATCOM applications. Two of the topologies are Modular Multilevel Cascaded Converters (MMCC), whilst the remaining circuits utilize magnetic elements and an open-winding transformer configuration to combine individual power modules. It is assumed that the STATCOM has to work under unbalanced conditions, so that it delivers both positive and negative sequence currents. Simulation studies for the four topologies have been carried out using the simulation tool Saber. © 2013 IEEE.

A high-power-factor, three-phase isolated AC-DC converter using high-frequency current injection

A single-stage, three-phase AC-to-DC converter topology is proposed for high-frequency power supply applications. The principal features of the circuit include continuous current operation of the three AC input inductors, inherent shaping of the input currents, resulting in high power factor, a transformer isolated output, and only two active devices are required, both soft-switched. Resonant conversion techniques are used, and a high power factor is achieved by injecting high-frequency currents into the three-phase rectifier, producing a high frequency modulation of the rectifier input voltages. The current injection principle is explained and the system operation is confirmed by a combination of simulation and experimental results.

Application of the Artificial Intelligence Algorithms for System Analysis of Multi Dimension Physiological Data for Developing Polyparametric Information System of Public Health Diagnostics

The polyparametric intelligence information system for diagnostics human functional state in medicine and public health is developed. The essence of the system consists in polyparametric describing of human functional state with the unified set of physiological parameters and using the polyparametric cognitive model developed as the tool for a system analysis of multitude data and diagnostics of a human functional state. The model is developed on the basis of general principles geometry and symmetry by algorithms of artificial intelligence systems. The architecture of the system is represented. The model allows analyzing traditional signs - absolute values of electrophysiological parameters and new signs generated by the model – relationships of ones. The classification of physiological multidimensional data is made with a transformer of the model. The results are presented to a physician in a form of visual graph – a pattern individual functional state. This graph allows performing clinical syndrome analysis. A level of human functional state is defined in the case of the developed standard (“ideal”) functional state. The complete formalization of results makes it possible to accumulate physiological data and to analyze them by mathematics methods.

Dynamical Systems in Description of Nonlinear Recursive Regression Transformers

The task of approximation-forecasting for a function, represented by empirical data was investigated. Certain class of the functions as forecasting tools: so called RFT-transformers, – was proposed. Least Square Method and superposition are the principal composing means for the function generating. Besides, the special classes of beam dynamics with delay were introduced and investigated to get classical results regarding gradients. These results were applied to optimize the RFT-transformers. The effectiveness of the forecast was demonstrated on the empirical data from the Forex market.

Design of a modular, high step-up ratio DC–DC converter for HVDC applications integrating offshore wind power

High-power and high-voltage gain dc-dc converters are key to high-voltage direct current (HVDC) power transmission for offshore wind power. This paper presents an isolated ultra-high step-up dc-dc converter in matrix transformer configuration. A flyback-forward converter is adopted as the power cell and the secondary side matrix connection is introduced to increase the power level and to improve fault tolerance. Because of the modular structure of the converter, the stress on the switching devices is decreased and so is the transformer size. The proposed topology can be operated in column interleaved modes, row interleaved modes, and hybrid working modes in order to deal with the varying energy from the wind farm. Furthermore, fault-tolerant operation is also realized in several fault scenarios. A 400-W dc-dc converter with four cells is developed and experimentally tested to validate the proposed technique, which can be applied to high-power high-voltage dc power transmission.

Multipurpose portable system for environmental, industrial, and medical applications

This dissertation is about the research carried on developing an MPS (Multipurpose Portable System) which consists of an instrument and many accessories. The instrument is portable, hand-held, and rechargeable battery operated, and it measures temperature, absorbance, and concentration of samples by using optical principles. The system also performs auxiliary functions like incubation and mixing. This system can be used in environmental, industrial, and medical applications. ^ Research emphasis is on system modularity, easy configuration, accuracy of measurements, power management schemes, reliability, low cost, computer interface, and networking. The instrument can send the data to a computer for data analysis and presentation, or to a printer. ^ This dissertation includes the presentation of a full working system. This involved integration of hardware and firmware for the micro-controller in assembly language, software in C and other application modules. ^ The instrument contains the Optics, Transimpedance Amplifiers, Voltage-to-Frequency Converters, LCD display, Lamp Driver, Battery Charger, Battery Manager, Timer, Interface Port, and Micro-controller. ^ The accessories are a Printer, Data Acquisition Adapter (to transfer the measurements to a computer via the Printer Port and expand the Analog/Digital conversion capability), Car Plug Adapter, and AC Transformer. This system has been fully evaluated for fault tolerance and the schemes will also be presented. ^

Proteção diferencial de transformadores de potência utilizando a transformada Wavelet

About 10% of faults involving the electrical system occurs in power transformers. Therefore, the protection applied to the power transformers is essential to ensure the continuous operation of this device and the efficiency of the electrical system. Among the protection functions applied to power transformers, the differential protection appears as one of the main schemes, presenting reliable discrimination between internal faults and external faults or inrush currents. However, when using the low frequency components of the differential currents flowing through the transformer, the main difficulty of the conventional methods of differential protection is the delay for detection of the events. However, internal faults, external faults and other disturbances related to the transformer operation present transient and can be appropriately detected by the wavelet transform. In this paper is proposed the development of a wavelet-based differential protection for detection and identification of external faults to the transformer, internal faults, and transformer energizing by using the wavelet coefficient energy of the differential currents. The obtained results reveal the advantages of using of the wavelet transform in the differential protection compared to conventional protection, since it provides reliability and speed in detection of these events.

A argamassa da casa e do conflito: os usos políticos da construção da cidade da esperança feitos pelo grupo aluizista (1964-1966)

Nous nous proposons à analyser les usages politiques que le groupe lié au gouvernement Aluízio Alves a fait d’un complexe d’habitation s’appelé Cidade da Esperança, qui a été construit en Natal dans les années 1960. Ce nouvel espace a été utilisé pour solutionner la crise d’habitation dans la capital, dont le número de personne augmentait fortement. Cette élévation, néanmoins, n’a été pas accompagné pari passu pour l’expansion de l’offre des maisons pour le marché et ce pénurie se transformer dans un problème social e politique. La Cidade da Esperança, alors, a été une réponse de l’État à la population et entre ces dynamiques, le groupe du gouvernement Aluízio Alves a su explorer la question parce qu’il a utilisé l’espace pour négocier avec differents agentes sociaux et il aussi a réussi élire Agnelo Alves, le diretor de la construction, à maire de Natal. Par la construction de cette analyse nous utilisons le journal gouvernamental Tribuna do Norte et le journal catholique A Ordem. Ils ont représenté dans ces pages les problèmes de pénurie des maisons et aussi les appropriations de la Cidade da Esperança. Pour ça nous pouvons reconstruire ces processus historiques. Pour les journaux est possible connaître du quotidien des travaux, les actions des sujets réponsable et les tensions politiques du groupe aluizista avec l’autre lié à Dinarte Mariz. Ainsi, ils possibilites l’étude de l’utilisation de la Cidade da Esperança dans l’intérieur d’une réseau des tensions et l’examen de la recherche pour legitimité dans un champ politique très poralisé.