Morphological characterization of the Azikheli buffalo in Pakistan

This study aims to characterize Azikheli, an undocumented buffalo breed, in its home tract (Khwazakhela, Swat, Pakistan) under traditional farming conditions. For this purpose, 108 buffalo cows and 27 bulls were randomly selected. Mean, standard error, Student's t test and Chi-square test were used for various comparisons. The results show that the majority of animals have a brown coat colour. Cows have significantly higher heart girths, longer horns, longer necks and wider faces at the level of the eyes than bulls, whereas bulls have significantly longer bodies, longer ears, thicker horns, thicker necks and larger hooves than cows. Horns are flat laterally, directed backwards and then slightly upwards without twisting, leading to a sickle to semi-sickle appearance. Owing to its small body size and brown coat colour, the breed is well adapted to mountain slope grazing and thrives well away from swamps. Its adaptation to mountainous ecosystems warrants its in situ conservation.

A chrysophyte-based quantitative reconstruction of winter severity from varved lake sediments in NE Poland during the past millennium and its relationship to natural climate variability

Chrysophyte cysts are recognized as powerful proxies of cold-season temperatures. In this paper we use the relationship between chrysophyte assemblages and the number of days below 4 °C (DB4 °C) in the epilimnion of a lake in northern Poland to develop a transfer function and to reconstruct winter severity in Poland for the last millennium. DB4 °C is a climate variable related to the length of the winter. Multivariate ordination techniques were used to study the distribution of chrysophytes from sediment traps of 37 low-land lakes distributed along a variety of environmental and climatic gradients in northern Poland. Of all the environmental variables measured, stepwise variable selection and individual Redundancy analyses (RDA) identified DB4 °C as the most important variable for chrysophytes, explaining a portion of variance independent of variables related to water chemistry (conductivity, chlorides, K, sulfates), which were also important. A quantitative transfer function was created to estimate DB4 °C from sedimentary assemblages using partial least square regression (PLS). The two-component model (PLS-2) had a coefficient of determination of View the MathML sourceRcross2 = 0.58, with root mean squared error of prediction (RMSEP, based on leave-one-out) of 3.41 days. The resulting transfer function was applied to an annually-varved sediment core from Lake Żabińskie, providing a new sub-decadal quantitative reconstruction of DB4 °C with high chronological accuracy for the period AD 1000–2010. During Medieval Times (AD 1180–1440) winters were generally shorter (warmer) except for a decade with very long and severe winters around AD 1260–1270 (following the AD 1258 volcanic eruption). The 16th and 17th centuries and the beginning of the 19th century experienced very long severe winters. Comparison with other European cold-season reconstructions and atmospheric indices for this region indicates that large parts of the winter variability (reconstructed DB4 °C) is due to the interplay between the oscillations of the zonal flow controlled by the North Atlantic Oscillation (NAO) and the influence of continental anticyclonic systems (Siberian High, East Atlantic/Western Russia pattern). Differences with other European records are attributed to geographic climatological differences between Poland and Western Europe (Low Countries, Alps). Striking correspondence between the combined volcanic and solar forcing and the DB4 °C reconstruction prior to the 20th century suggests that winter climate in Poland responds mostly to natural forced variability (volcanic and solar) and the influence of unforced variability is low.

Gas transport in firn: multiple-tracer characterisation and model intercomparison for NEEM, Northern Greenland

Air was sampled from the porous firn layer at the NEEM site in Northern Greenland. We use an ensemble of ten reference tracers of known atmospheric history to characterise the transport properties of the site. By analysing uncertainties in both data and the reference gas atmospheric histories, we can objectively assign weights to each of the gases used for the depth-diffusivity reconstruction. We define an objective root mean square criterion that is minimised in the model tuning procedure. Each tracer constrains the firn profile differently through its unique atmospheric history and free air diffusivity, making our multiple-tracer characterisation method a clear improvement over the commonly used single-tracer tuning. Six firn air transport models are tuned to the NEEM site; all models successfully reproduce the data within a 1σ Gaussian distribution. A comparison between two replicate boreholes drilled 64 m apart shows differences in measured mixing ratio profiles that exceed the experimental error. We find evidence that diffusivity does not vanish completely in the lock-in zone, as is commonly assumed. The ice age- gas age difference (1 age) at the firn-ice transition is calculated to be 182+3−9 yr. We further present the first intercomparison study of firn air models, where we introduce diagnostic scenarios designed to probe specific aspects of the model physics. Our results show that there are major differences in the way the models handle advective transport. Furthermore, diffusive fractionation of isotopes in the firn is poorly constrained by the models, which has consequences for attempts to reconstruct the isotopic composition of trace gases back in time using firn air and ice core records.

Fourier Series by Least Square Minimization

An introduction to Fourier Series based on the minimization of the least square error between an approximate series representation and the exact function.

DISTRIBUTION FUNCTIONS, MEAN SQUARED ERRORS, AND CONFIDENCE LIMITS FOR RIDGE REGRESSION ESTIMATORS

A large number of ridge regression estimators have been proposed and used with little knowledge of their true distributions. Because of this lack of knowledge, these estimators cannot be used to test hypotheses or to form confidence intervals.^ This paper presents a basic technique for deriving the exact distribution functions for a class of generalized ridge estimators. The technique is applied to five prominent generalized ridge estimators. Graphs of the resulting distribution functions are presented. The actual behavior of these estimators is found to be considerably different than the behavior which is generally assumed for ridge estimators.^ This paper also uses the derived distributions to examine the mean squared error properties of the estimators. A technique for developing confidence intervals based on the generalized ridge estimators is also presented. ^

Impact studies from different factors on root development from Stevia rebaudiana bertoni

The demand for an alternative and a high potency sweetener to substitute sugar increases year in year out, more so as a high percentage of the world population becomes increasingly diabetic. The alternative natural sweetener at hand has been Stevia rebaudiana Bertoni, a plant species, native to Paraguay and a member of the family compositae. Stevia is usually propagated by stem cuttings due to low percentage (10 %) seed germination, thus limiting large scales cultivation. To cultivate this crop en mass therefore, there is need to evolve efficient rooting techniques. Influences of irradiation from light, and hormones on rooting have been reported. The rooting efficacy in stem cuttings of this crop under varying light wavelengths, dark and hormone factors was investigated. Evaluated parameters include- (i) day of root emergent, (ii) percentage of rooted cuttings, (iii) average number, (iv) length and (v) width, of roots. Analysis of variance at p<.05 revealed that the number, length and width, of roots differed significantly in each case at p<0.000. Light irradiation was highly effective and a necessary factor for rooting in stems cuttings of this crop. The red light-IBA combined factors served best in stem micro-cutting practice and facilitation of effective mass cultivation in stevia crop.

Geochemistry of volcanic rocks from the Hikurangi and Manihiki Plateaus

Here we present the first radiometric age data and a comprehensive geochemical data set (including major and trace element and Sr-Nd-Pb-Hf isotope ratios) for samples from the Hikurangi Plateau basement and seamounts on and adjacent to the plateau obtained during the R/V Sonne 168 cruise, in addition to age and geochemical data from DSDP Site 317 on the Manihiki Plateau. The 40Ar/39Ar age and geochemical data show that the Hikurangi basement lavas (118-96 Ma) have surprisingly similar major and trace element and isotopic characteristics to the Ontong Java Plateau lavas (ca. 120 and 90 Ma), primarily the Kwaimbaita-type composition, whereas the Manihiki DSDP Site 317 lavas (117 Ma) have similar compositions to the Singgalo lavas on the Ontong Java Plateau. Alkalic, incompatible-element-enriched seamount lavas (99-87 Ma and 67 Ma) on the Hikurangi Plateau and adjacent to it (Kiore Seamount), however, were derived from a distinct high time-integrated U/Pb (HIMU)-type mantle source. The seamount lavas are similar in composition to similar-aged alkalic volcanism on New Zealand, indicating a second wide-spread event from a distinct source beginning ca. 20 Ma after the plateau-forming event. Tholeiitic lavas from two Osbourn seamounts on the abyssal plain adjacent to the northeast Hikurangi Plateau margin have extremely depleted incompatible element compositions, but incompatible element characteristics similar to the Hikurangi and Ontong Java Plateau lavas and enriched isotopic compositions intermediate between normal mid-ocean-ridge basalt (N-MORB) and the plateau basement. These younger (~52 Ma) seamounts may have formed through remelting of mafic cumulate rocks associated with the plateau formation. The similarity in age and geochemistry of the Hikurangi, Ontong Java and Manihiki Plateaus suggest derivation from a common mantle source. We propose that the Greater Ontong Java Event, during which ?1% of the Earth's surface was covered with volcanism, resulted from a thermo-chemical superplume/dome that stalled at the transition zone, similar to but larger than the structure imaged presently beneath the South Pacific superswell. The later alkalic volcanism on the Hikurangi Plateau and the Zealandia micro-continent may have been part of a second large-scale volcanic event that may have also triggered the final breakup stage of Gondwana, which resulted in the separation of Zealandia fragments from West Antarctica.

Geochemical studies of the Cretaceous-Tertiary boundary in ODP Holes 113-689B and 113-690C

In a study of ODP Hole 689B no iridium (Ir) anomaly was found in Sections 1 through 6 of Core 25X or in Core 26X from the top down to section 2, 3-12 cm. The background Ir abundance averaged 11 parts per trillion (ppt) and a clay-enriched region had nearly the same average, 26 ± 12 ppt. If the Cretaceous-Tertiary (K-T) contact is in the region studied, then sedimentation was not continuous, and the K-T boundary was probably either not deposited or it was eroded away. In a study of Cores 15X and 16X of ODP Hole 690C, an iridium peak with a maximum abundance of 1566 ± 222 ppt was found in Section 4 of Core 15X at 39-40 cm with a half-width of 6.6 cm. Background abundances were ~15 ppt and distinctly higher Ir abundances were observed from 119 cm below to 72 cm above the main peak. The Ir distribution below the main peak is attributed to bioturbation by organisms with burrows extending at least 0.4 m. The Ir distribution above the main peak may be due to the same cause but other explanations may be significant. There are variable enrichments of clay in the mainly CaCO3 sediment of Core 15X, and the stratigraphically lowest part of the most abundant clay deposits is found (within 2 cm) in the same position as the main Ir peak. The clay deposit, which is estimated to be about 50% of the sediment, extends upward ~19 cm and then slowly decreases to a background level of 10% over 1 m. The degree of homogeneity of the clay-rich interval suggests it was not due to episodic volcanism but may have been due to a decrease of the CaCO3 deposition rate which was possibly triggered by the impact of a large asteroid or comet on the Earth.

Using a causal smoothing to improve the performance of an on-line neural network glucose prediction algorithm

This work evaluates a spline-based smoothing method applied to the output of a glucose predictor. Methods:Our on-line prediction algorithm is based on a neural network model (NNM). We trained/validated the NNM with a prediction horizon of 30 minutes using 39/54 profiles of patients monitored with the Guardian® Real-Time continuous glucose monitoring system The NNM output is smoothed by fitting a causal cubic spline. The assessment parameters are the error (RMSE), mean delay (MD) and the high-frequency noise (HFCrms). The HFCrms is the root-mean-square values of the high-frequency components isolated with a zero-delay non-causal filter. HFCrms is 2.90±1.37 (mg/dl) for the original profiles.

Hybrid convex combinations for IIR system identification.

The low complexity of IIR adaptive filters (AFs) is specially appealing to realtime applications but some drawbacks have been preventing their widespread use so far. For gradient based IIR AFs, adverse operational conditions cause convergence problems in system identification scenarios: underdamped and clustered poles, undermodelling or non-white input signals lead to error surfaces where the adaptation nearly stops on large plateaus or get stuck at sub-optimal local minima that can not be identified as such a priori. Furthermore, the non-stationarity in the input regressor brought by the filter recursivity and the approximations made by the update rules of the stochastic gradient algorithms constrain the learning step size to small values, causing slow convergence. In this work, we propose IIR performance enhancement strategies based on hybrid combinations of AFs that achieve higher convergence rates than ordinary IIR AFs while keeping the stability.

Visual and optical performance and quality of life after implantation of posterior chamber phakic intraocular lens

Purpose To evaluate visual, optical, and quality of life (QoL) outcomes and intercorrelations after bilateral implantation of posterior chamber phakic intraocular lenses. Methods Twenty eyes with high to moderate myopia of 10 patients that underwent PRL implantation (Phakic Refractive Lens, Carl Zeiss Meditec AG) were examined. Refraction, visual acuity, photopic and low mesopic contrast sensitivity (CS) with and without glare, ocular aberrations, as well as QoL outcomes (National Eye Institute Refractive Error Quality of Life Instrument-42, NEI RQL-42) were evaluated at 12 months postoperatively. Results Significant improvement in uncorrected (UDVA) and best-corrected distance (CDVA) visual acuities were found postoperatively (p < 0.01), with significant reduction in spherical equivalent (p < 0.01). Low mesopic CS without glare was significantly better than measurements with glare for 1.5, 3, and 6 cycles/degree (p < 0.01). No significant correlations between higher order root mean square (RMS) with CDVA (r = −0.26, p = 0.27) and CS (r ≤ 0.45, p ≥ 0.05) were found. Postoperative binocular photopic CS for 12 cycles/degree and 18 cycles/degree correlated significantly with several RQL-42 scales. Glare index correlated significantly with CS measures and scotopic pupil size (r = −0.551, p = 0.04), but not with higher order RMS (r = −0.02, p = 0.94). Postoperative higher order RMS, postoperative primary coma and postoperative spherical aberration was significant higher for 5-mm pupil diameter (p < 0.01) compared with controls. Conclusions Correction of moderate to high myopia by means of PRL implantation had a positive impact on CS and QoL. The aberrometric increase induced by the surgery does not seem to limit CS and QoL. However, perception of glare is still a relevant disturbance in some cases possibly related to the limitation of the optical zone of the PRL.

Estimation of Time-Limited Channel Spectra From Nonuniform Samples

This paper deals with the estimation of a time-invariant channel spectrum from its own nonuniform samples, assuming there is a bound on the channel’s delay spread. Except for this last assumption, this is the basic estimation problem in systems providing channel spectral samples. However, as shown in the paper, the delay spread bound leads us to view the spectrum as a band-limited signal, rather than the Fourier transform of a tapped delay line (TDL). Using this alternative model, a linear estimator is presented that approximately minimizes the expected root-mean-square (RMS) error for a deterministic channel. Its main advantage over the TDL is that it takes into account the spectrum’s smoothness (time width), thus providing a performance improvement. The proposed estimator is compared numerically with the maximum likelihood (ML) estimator based on a TDL model in pilot-assisted channel estimation (PACE) for OFDM.

Gakara region, Burundi, 1994, Defense Mapping Agency (DMA) Series Z724, Sheet 4673-I (Raster Image)

This layer is a georeferenced raster image of the United States Defense Mapping Agency (DMA) Series Z724, Burundi, 1:50,000 Topographic Line Map (TLM) Series sheet map entitled: Gakara. Printed in: 1994. Covers portions of Gakara region, Burundi. Sheet: 4673-I. Edition statement: Ed. 1 - DMA. The image inside the map neatline is georeferenced to the surface of the earth and fit to World Geodetic System (1984) coordinates. All map collar information is also available as part of the raster image. Burundi 1:50:000 Series Z724 maps are in English and French (legends also include Rundi). Each source map in the series is printed in color at a scale of 1:50,000. Series source sheets were published in 1994-1995 by the United States Defense Mapping Agency, Hydrographic/Topographic Center. The source map was scanned and georeferenced for Harvard University's Center for Geographic Analysis' AfricaMap project by East View Cartographic. Individual TLM sheets covering Burundi (40 sheets in total) were selected from the TLM worldwide series. DMA Topographic Line Map series maps are typical topographic maps portraying both natural and manmade features. They show and name works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. They also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 20 meters, with some sheets having supplemental meter contours, form lines, hachures, shading, and/or spot heights. Depths shown by bathymetric isolines. Please pay close attention to map collar information on projections, spheroid, compilation dates, legend information, and keys to grid numbering and other numbers which appear inside the neatline.

Bubanza region, Burundi, 1994, Defense Mapping Agency (DMA) Series Z724, Sheet 4674-I (Raster Image)

This layer is a georeferenced raster image of the United States Defense Mapping Agency (DMA) Series Z724, Burundi, 1:50,000 Topographic Line Map (TLM) Series sheet map entitled: Bubanza. Printed in: 1994. Covers portions of Bubanza region, Burundi. Sheet: 4674-I. Edition statement: Ed. 1 - DMA. The image inside the map neatline is georeferenced to the surface of the earth and fit to World Geodetic System (1984) coordinates. All map collar information is also available as part of the raster image. Burundi 1:50:000 Series Z724 maps are in English and French (legends also include Rundi). Each source map in the series is printed in color at a scale of 1:50,000. Series source sheets were published in 1994-1995 by the United States Defense Mapping Agency, Hydrographic/Topographic Center. The source map was scanned and georeferenced for Harvard University's Center for Geographic Analysis' AfricaMap project by East View Cartographic. Individual TLM sheets covering Burundi (40 sheets in total) were selected from the TLM worldwide series. DMA Topographic Line Map series maps are typical topographic maps portraying both natural and manmade features. They show and name works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. They also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 20 meters, with some sheets having supplemental meter contours, form lines, hachures, shading, and/or spot heights. Depths shown by bathymetric isolines. Please pay close attention to map collar information on projections, spheroid, compilation dates, legend information, and keys to grid numbering and other numbers which appear inside the neatline.

Bujumbura region, Burundi, 1994, Defense Mapping Agency (DMA) Series Z724, Sheet 4674-II (Raster Image)

This layer is a georeferenced raster image of the United States Defense Mapping Agency (DMA) Series Z724, Burundi, 1:50,000 Topographic Line Map (TLM) Series sheet map entitled: Bujumbura. Printed in: 1994. Covers portions of Bujumbura region, Burundi. Sheet: 4674-II. Edition statement: Ed. 1 - DMA. The image inside the map neatline is georeferenced to the surface of the earth and fit to World Geodetic System (1984) coordinates. All map collar information is also available as part of the raster image. Burundi 1:50:000 Series Z724 maps are in English and French (legends also include Rundi). Each source map in the series is printed in color at a scale of 1:50,000. Series source sheets were published in 1994-1995 by the United States Defense Mapping Agency, Hydrographic/Topographic Center. The source map was scanned and georeferenced for Harvard University's Center for Geographic Analysis' AfricaMap project by East View Cartographic. Individual TLM sheets covering Burundi (40 sheets in total) were selected from the TLM worldwide series. DMA Topographic Line Map series maps are typical topographic maps portraying both natural and manmade features. They show and name works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. They also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 20 meters, with some sheets having supplemental meter contours, form lines, hachures, shading, and/or spot heights. Depths shown by bathymetric isolines. Please pay close attention to map collar information on projections, spheroid, compilation dates, legend information, and keys to grid numbering and other numbers which appear inside the neatline.