Three-year outcomes of Straumann Bone Level SLActive dental implants in daily dental practice: a prospective non-interventional study

OBJECTIVE The aim of this investigation was to evaluate the performance of Straumann Bone Level SLActive implants in various clinical situations in daily dental practice for up to 3 years. METHOD AND MATERIALS This was a prospective, multicenter, non-interventional study in which implants were placed within approved indications in any situation deemed suitable by the treating clinician. No implant placement or loading protocol was specified, and implants were placed according to the routine treatment protocols at each participating center. RESULTS In this analysis, data were available from 342 implants in 233 patients in three countries (USA, Canada, and Switzerland). One or two implants were placed in the majority of patients (70.8% and 19.3%, respectively), mostly in the maxilla (71.3%); almost half (47.7%) were placed in the esthetic zone. Implant placement after 4 to > 16 weeks of healing was preferred in Switzerland (92.0%), while 42.0% of implants were placed immediately in the USA and Canada. A flapless procedure was performed in 25.2% of cases in the USA and Canada, compared to 0.5% in Switzerland. Cumulative implant survival and success rates after 3 years were 97.5% and 93.5%, respectively. CONCLUSION Straumann Bone Level Implants can achieve favorable outcomes and high survival rates after 3 years in daily dental practice. The survival and success rates were comparable with those achieved in formal controlled clinical trials.

Stability of Le Fort I maxillary inferior repositioning surgery with rigid internal fixation: a systematic review

The aim of this study was to evaluate the stability of Le Fort I maxillary inferior repositioning surgery in patients with a vertical maxillary deficiency at least 6 months after surgery. The electronic databases were searched to identify all articles reporting the long-term effects of one-piece maxillary inferior repositioning with rigid fixation. Methodological quality was evaluated according to 15 criteria related to study design, measurements, and statistical analysis. Two articles were identified, with a total of 22 patients. The maxilla was repositioned inferiorly from a mean 3.2 to 4.5mm in the anterior part and from a mean 0.1 to 1.8mm in the posterior part. At 6 months post-treatment, absolute relapse of a mean 1.6mm was measured for the anterior part of the maxilla and 0.3mm for the posterior part of the maxilla. The stability of maxillary inferior repositioning surgery could not be confirmed due to the small sample size, unclear diagnosis, and potential confounding factors.

The timing of extraction of non-restorable first permanent molars: a systematic review.

AIM To identify the ideal timing of first permanent molar extraction to reduce the future need for orthodontic treatment. MATERIALS AND METHODS A computerised database and subsequent manual search was performed using Medline database, Embase and Ovid, covering the period from January 1946 to February 2013. Two reviewers (JE and ME) extracted the data independently and evaluated if the studies matched the inclusion criteria. Inclusion criteria were specification of the follow-up with clinical examination or analysis of models, specification of the chronological age or dental developmental stage at the time of extraction, no treatment in between, classification of the treatment result into perfect, good, average and poor. The search was limited to human studies and no language limitations were set. RESULTS The search strategy resulted in 18 full-text articles, of which 6 met the inclusion criteria. By pooling the data from maxillary sites, good to perfect clinical outcome was estimated in 72% (95% confidence interval 63%-82%). Extractions at the age of 8-10.5 years tended to show better spontaneous clinical outcomes compared to the other age groups. By pooling the data from mandibular sites, extractions performed at the age of 8-10.5 and 10.5-11.5 years showed significantly superior spontaneous clinical outcome with a probability of 50% and 59% likelihood, respectively, to achieve good to perfect clinical result (p<0.05) compared to the other age groups (<8 years of age: 34%, >11.5 years of age: 44%). CONCLUSION Prevention of complications after first permanent molars extractions is an important issue. The overall success rate of spontaneous clinical outcome for maxillary extraction of first permanent molars was superior to mandibular extraction. Extractions of mandibular first permanent molars should be performed between 8 and 11.5 years of age in order to achieve a good spontaneous clinical outcome. For the extraction in the maxilla, no firm conclusions concerning the ideal extraction timing could be drawn.

Time-dependent supraimplant mucosa changes: short communication

PURPOSE The aim of this short communication was to analyze time-dependent changes of the supraimplant mucosa architecture in the esthetic zone. MATERIALS AND METHODS Five patients underwent single-tooth replacement with implant crowns in the anterior maxilla. The supraimplant soft tissue was conditioned with fixed provisional crowns. Quadrantlike digital impressions were taken with an intraoral optical scanning device at three time points: t0, immediately after removal of the provisional (baseline); t1, after 5 minutes; and t2, after 10 minutes. To analyze time-dependent mucosal changes, the corresponding digital files were superimposed for each patient, and baseline (t0) scans were compared with t1 and t2 scans, respectively. Wilcoxon rank sum tests were used for statistical calculations with a strict level of significance at P < .01. RESULTS Mean values for supraimplant soft tissue changes were statistically significantly different after 5 minutes (5.5%; standard deviation ± 0.3%) in comparison to the results after 10 minutes (21.7%; standard deviation ± 1.8%). The direction of mucosa shrinkage showed a trend toward palatal sites. CONCLUSION Based on the findings of this analysis, changes in supraimplant mucosa architecture seem to be affected only slightly during the first 5 minutes after removal of soft tissue support.

Implant therapy in a surgical specialty clinic: an analysis of patients, indications, surgical procedures, risk factors, and early failures

PURPOSE The aim of this study was to analyze the patient pool referred to a specialty clinic for implant surgery over a 3-year period. MATERIALS AND METHODS All patients receiving dental implants between 2008 and 2010 at the Department of Oral Surgery and Stomatology were included in the study. As primary outcome parameters, the patients were analyzed according to the following criteria: age, sex, systemic diseases, and indication for therapy. For the inserted implants, the type of surgical procedure, the types of implants placed, postsurgical complications, and early failures were recorded. A logistic regression analysis was performed to identify possible local and systemic risk factors for complications. As a secondary outcome, data regarding demographics and surgical procedures were compared with the findings of a historic study group (2002 to 2004). RESULTS A total of 1,568 patients (792 women and 776 men; mean age, 52.6 years) received 2,279 implants. The most frequent indication was a single-tooth gap (52.8%). Augmentative procedures were performed in 60% of the cases. Tissue-level implants (72.1%) were more frequently used than bone-level implants (27.9%). Regarding dimensions of the implants, a diameter of 4.1 mm (59.7%) and a length of 10 mm (55.0%) were most often utilized. An early failure rate of 0.6% was recorded (13 implants). Patients were older and received more implants in the maxilla, and the complexity of surgical interventions had increased when compared to the patient pool of 2002 to 2004. CONCLUSION Implant therapy performed in a surgical specialty clinic utilizing strict patient selection and evidence-based surgical protocols showed a very low early failure rate of 0.6%.

Anterior superior alveolar nerve (ASAN): A morphometric-anatomical Analysis

The anterior superior alveolar nerve (ASAN) is a branch of the infraorbital nerve. Only few studies have morphometrically evaluated the course of the ASAN. Midfacial segments of ten hemisectioned fresh adult cadaver heads were dissected to uncover the anterior wall of the maxilla. Specimens were subsequently decalcified and the bone overlying the ASAN was removed under a microscope to expose the ASAN. Its branching pattern from the infraorbital nerve was recorded, and the course of the ASAN within the anterior wall of the maxillary sinus was morphometrically assessed measuring distances to predefined landmarks using a digital caliper. A distinct ASAN was observed in all specimens. It arose lateral (six cases) or inferior (four cases) from the infraorbital nerve. The point of origin was located at a mean distance of 12.2 ± 5.79 mm posterior to the infraorbital foramen. The ASAN was located on average 2.8 ± 5.13 mm lateral to the infraorbital foramen. After coursing medially, the ASAN ran inferior to the foramen at a mean distance of 5.5 ± 3.07 mm. When approaching the nasal aperture, the loop of the ASAN was on average 13.6 ± 3.07 mm above the nasal floor. The horizontal mean distance from the ASAN to the nasal aperture was 4.3 ± 2.74 mm halfway down from the loop, and 3.3 ± 2.60 mm at the floor of the nose, respectively. In conclusion, the present study evaluated the course of the ASAN relative to the infraorbital foramen and nasal aperture. This information is helpful to avoid damage to this anatomical structure during interventions in the infraobrital region of the maxilla. Further, knowledge of the course of the ASAN and of its bony correlate (canalis sinuosus) may be valuable in interpreting anesthetic or radiologic findings in the anterior maxilla.

Indications and Frequency for the Use of Cone Beam Computed Tomography for Implant Treatment Planning in a Specialty Clinic

PURPOSE To analyze the indications and frequency for three-dimensional (3D) imaging for implant treatment planning in a pool of patients referred to a specialty clinic over a 3-year period. MATERIALS AND METHODS All patients who received dental implants between 2008 and 2010 at the Department of Oral Surgery and Stomatology at the University of Bern were included in the study. The influence of age, gender, and time of treatment (2008 to 2010) on the frequency of use of two-dimensional (2D) radiographic imaging modalities alone or in combination with 3D cone beam computed tomography (CBCT) scans was analyzed. Furthermore, the influence of the indication, location, and need for bone augmentation on the frequency of use of 2D imaging modalities alone or in combination with CBCT was evaluated. RESULTS In all, 1,568 patients (792 women and 776 men) received 2,279 implants. Overall, 633 patients (40.4%) were analyzed with 2D imaging procedures alone. CBCT was performed in 935 patients (59.6%). There was a statistically significant increase in CBCT between 2008 and 2010. Patients older than 55 years received a CBCT scan in addition to 2D radiographic imaging statistically significantly more often. Additional 3D imaging was most frequently performed in the posterior maxilla, whereas 2D radiographs alone exhibited the highest frequency in the anterior mandible. The combination of 2D with CBCT was used predominantly for implant placement with simultaneous or staged guided bone regeneration or sinus elevation. CONCLUSION Based on these findings from a specialty clinic, the use of additional CBCT imaging for implant treatment planning is influenced by the indication, location, local anatomy (including the need for bone augmentation), and the age of the patient.

Osteonecrosis de los maxilares y bifosfonatos : revisión

La osteonecrosis de los maxilares es la necrosis y exposición del hueso de la mandíbula y el maxilar, asociada al consumo de bifosfonatos. Estos son una familia de drogas que se utiliza en el tratamiento de alteraciones óseas causadas principalmente por tumores malignos (mama y próstata) y osteoporosis. No existe irradiación previa. El hueso macroscópicamente se ve sucio avascular. El objetivo de este artículo es profundizar el conocimiento sobre los bifosfonatos, factores causales de las lesiones.

Amplificador de señal analógico basado en conceptos biomiméticos. Desarrollo de modelos computacionales y validación experimental

La presente tesis doctoral estudia las características de un transductor acústico bioinspirado en la estructura del maxilar inferior de un Zifio de Couvier (Ziphius cavirostris). El mecanismo de funcionamiento del sensor se basa en las características de un sistema acoplado formado por los distintos componentes acústicos identificados en el maxilar. Para analizar las características del sensor se propone un modelo simplificado 2D que consta de una cavidad cerrada con forma de bocina acoplada a una lengüeta. Una parte de la lengüeta se encuentra dentro de la cavidad y otra en el exterior. Dicha lengüeta detecta los cambios de presión acústica y las vibraciones generadas por el sonido y las transmite con ondas de flexión al interior de la cavidad. La excitación prolongada sobre la placa puede provocar la activación de los modos propios del sistema acoplado. Dichos modos se caracterizan porque presentan un máximo de presión en el cono de la bocina la cual a su vez actúa como un amplificador acústico. Mediante el Método de los elementos Finitos se analizan las características acústicas del sensor y se construye un prototipo experimental para validar los resultados evaluados en el modelo numérico. Se propone una metodología numérica que permite desarrollar y validar un elemento tetraédrico para caracterizar el comportamiento isotrópico de los medios porosos. La metodología permite construir elementos de línea y bidimensionales. A partir de esta metodología se desarrolla un elemento plano ortotrópico. Se realiza un modelo de la cavidad en el que una de las paredes de la bocina está constituida por material poroso y se une la parte exterior de la lengüeta a dicho material para que constituya una viga sobre un apoyo elástico. Se calcula la respuesta modal y se discuten los efectos del material poroso en la eficiencia del transductor y las posibles mejoras a introducir en el mismo. SUMMARY This Thesis studies the characteristics of an acoustic transducer bioinspired by the structure of the lower maxilla of an odontoceto. In this case a Cuvier’s beaked whale (Ziphius cavirostris). The transducer working mechanism is based in a coupled system, with components identified in the maxilla. To analyze the transducer a simplified 2D model composed by a horn shaped closed cavity is modeled. The cavity is coupled with a flat belt. The belt has one part inside the cavity and the other part outside of it. The belt traverses the cavity wall and it is in charge to pick the vibrations from outside and introduce it inside the cavity. The transmission is obtained through the belt bending. A sustained external load with the right frequency contents will allow the system to reach a stationary pressure intensity distribution inside the cavity. Frequencies with modal shapes that show an important intensity increase at the horn tip are of special interest because of the signal amplification. A finite element model is constructed to study the transducer coupled modes and a prototype is constructed to validate the numerical results. A numerical methodology to construct and validate a tetrahedral finite element for isotropic porous materials is presented. The methodology allows constructing linear and 2D elements. It is extended to model orthotropic porous materials behavior. At the end, one of the horn walls is made of an orthotropic material and the external belt is glued to it in order to configure a belt over an elastic foundation. Modal response is evaluated and the porous material effects in the transducer efficiency and further improvements are discussed.

AVALIAÇÃO CEFALOMÉTRICA DAS ALTERAÇÕES SAGITAIS E VERTICAIS EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente estudo teve como objetivos avaliar cefalometricamente as alterações esqueléticas, dentárias e de tecidos moles, no sentido sagital e vertical em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente. A amostra constituiu-se de 51 telerradiografias em norma lateral de 17 pacientes adultos, brasileiros, sendo 6 do sexo masculino e 11 do sexo feminino, com idade média de 24 anos e 1 mês e severa deficiência transversa da maxila. As telerradiografias foram obtidas no início do tratamento (T1), após o procedimento de ERMAC (T2), e após três meses de contenção com o próprio aparelho disjuntor (T3). A partir da análise e discussão dos resultados, observouse rotação da maxila e da mandíbula no sentido horário, havendo, como conseqüência, aumento da AFAI. Após 3 meses de contenção, houve recidiva considerando-se o aumento da AFAI. Houve extrusão dos incisivos superiores, na qual foi mantida no período de contenção. Durante a contenção, houve também retrusão dos incisivos superiores. Considerando-se aos molares superiores, houve extrusão após a expansão, acompanhada de uma recidiva com menor magnitude quando comparada ao efeito da expansão obtida. Não houve alteração dos tecidos moles quanto a espessura nasal e houve retrusão do lábio superior, lábio inferior e pogônio mole, acompanhando a parte esquelética. Houve aumento do ângulo nasolabial.

AVALIAÇÃO CEFALOMÉTRICA DAS ALTERAÇÕES SAGITAIS E VERTICAIS EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente estudo teve como objetivos avaliar cefalometricamente as alterações esqueléticas, dentárias e de tecidos moles, no sentido sagital e vertical em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente. A amostra constituiu-se de 51 telerradiografias em norma lateral de 17 pacientes adultos, brasileiros, sendo 6 do sexo masculino e 11 do sexo feminino, com idade média de 24 anos e 1 mês e severa deficiência transversa da maxila. As telerradiografias foram obtidas no início do tratamento (T1), após o procedimento de ERMAC (T2), e após três meses de contenção com o próprio aparelho disjuntor (T3). A partir da análise e discussão dos resultados, observouse rotação da maxila e da mandíbula no sentido horário, havendo, como conseqüência, aumento da AFAI. Após 3 meses de contenção, houve recidiva considerando-se o aumento da AFAI. Houve extrusão dos incisivos superiores, na qual foi mantida no período de contenção. Durante a contenção, houve também retrusão dos incisivos superiores. Considerando-se aos molares superiores, houve extrusão após a expansão, acompanhada de uma recidiva com menor magnitude quando comparada ao efeito da expansão obtida. Não houve alteração dos tecidos moles quanto a espessura nasal e houve retrusão do lábio superior, lábio inferior e pogônio mole, acompanhando a parte esquelética. Houve aumento do ângulo nasolabial.

Estudo cefalométrico-radiográfico das alterações dento-esqueléticas em pacientes com má oclusão de Classe III submetidos a tratamento ortodôntico-cirúrgico

Este estudo teve como finalidade avaliar cefalometricamente, por meio de telerradiografias em norma lateral, as alterações dento-esqueléticas em pacientes Classe III submetidos a tratamento ortodôntico-cirúrgico. A amostra experimental constituiu-se de 16 pacientes Brasileiros, dos sexos masculino e feminino, na faixa etária pré-cirúrgica média de 21 anos e 11 meses, apresentando má oclusão de Classe III com indicação de tratamento cirúrgico representado por recuo mandibular isolado. Para cada paciente foram realizadas telerradiografias nas fases inicial, pré-cirúrgica e pós-cirúrgica, sendo comparadas a um grupo controle, constituído de telerradiografias de indivíduos com oclusão normal. Segundo a metodologia empregada e pela análise dos resultados obtidos, avaliados estatisticamente, constatou-se que os pacientes Classe III com indicação de recuo mandibular foram caracterizados por um mau relacionamento entre as bases esqueléticas representado por um bom posicionamento da maxila associado a prognatismo mandibular, aumento da altura facial ântero-inferior, incisivos inferiores e sínfise mandibular lingualizados e incisivos superiores vestibularizados. A partir do preparo ortodôntico pré-cirúrgico, observou-se uma rotação mandibular no sentido horário, descompensação dentária representada por lingualização e extrusão dos incisivos superiores e vestibularização dos incisivos inferiores, acompanhada por uma remodelação da cortical óssea vestibular da sínfise mandibular. Esta descompensação ortodôntica definiu características dento-alveolares semelhantes às dos indivíduos com oclusão normal. O comportamento das variáveis dento-esqueléticas após a cirurgia ortognática, a partir do deslocamento póstero-superior das estruturas dento-esqueléticas da mandíbula, proporcionou um equilíbrio destas estruturas, em relação à oclusão normal.

Estudo cefalométrico-radiográfico das alterações dento-esqueléticas em pacientes com má oclusão de Classe III submetidos a tratamento ortodôntico-cirúrgico

Este estudo teve como finalidade avaliar cefalometricamente, por meio de telerradiografias em norma lateral, as alterações dento-esqueléticas em pacientes Classe III submetidos a tratamento ortodôntico-cirúrgico. A amostra experimental constituiu-se de 16 pacientes Brasileiros, dos sexos masculino e feminino, na faixa etária pré-cirúrgica média de 21 anos e 11 meses, apresentando má oclusão de Classe III com indicação de tratamento cirúrgico representado por recuo mandibular isolado. Para cada paciente foram realizadas telerradiografias nas fases inicial, pré-cirúrgica e pós-cirúrgica, sendo comparadas a um grupo controle, constituído de telerradiografias de indivíduos com oclusão normal. Segundo a metodologia empregada e pela análise dos resultados obtidos, avaliados estatisticamente, constatou-se que os pacientes Classe III com indicação de recuo mandibular foram caracterizados por um mau relacionamento entre as bases esqueléticas representado por um bom posicionamento da maxila associado a prognatismo mandibular, aumento da altura facial ântero-inferior, incisivos inferiores e sínfise mandibular lingualizados e incisivos superiores vestibularizados. A partir do preparo ortodôntico pré-cirúrgico, observou-se uma rotação mandibular no sentido horário, descompensação dentária representada por lingualização e extrusão dos incisivos superiores e vestibularização dos incisivos inferiores, acompanhada por uma remodelação da cortical óssea vestibular da sínfise mandibular. Esta descompensação ortodôntica definiu características dento-alveolares semelhantes às dos indivíduos com oclusão normal. O comportamento das variáveis dento-esqueléticas após a cirurgia ortognática, a partir do deslocamento póstero-superior das estruturas dento-esqueléticas da mandíbula, proporcionou um equilíbrio destas estruturas, em relação à oclusão normal.

ANÁLISE CEFALOMÉTRICA LATERAL DE RICKETTS: JOVENS DA REGIÃO NORTE DO BRASIL

Este trabalho teve como objetivo determinar as normas cefalométricas de medidas da análise lateral de RICKETTS 54 de 1981, numa amostra de indivíduos brasileiros, leucodermas, com oclusão normal, sem tratamento ortodôntico prévio, da Região Norte do Brasil e comparar estes valores com os preconizados por RICKETTS54 realizando a projeção destes valores para 18 anos de idade, a fim de tornar possível esta comparação. E determinar a freqüência dos diferentes tipos faciais obtidos pelo índice VERT (quantidade de crescimento vertical), obtido por meio da análise lateral de RICKETTS et al55 de 1982. O material constou de 28 telerradiografias em norma lateral de 15 indivíduos do sexo masculino e 13 do sexo feminino, com idades entre 20 e 26 anos, com média de idade de 22,42 anos. Estes indivíduos foram selecionados na Faculdade de odontologia do CESUPA (Centro Universitário do Pará). O método eleito para os traçados cefalométricos foi o computadorizado (programa Radiocef 2.0). Os resultados permitiram depreender que esta amostra da Região Norte do Brasil quando comparada aos valores normativos preconizados por RICKETTS54 apresentam: Biprotrusão dentária; maxila protruída; padrão braquifacial com tendência para mordida profunda; os molares superiores encontram-se numa posição mais posterior; incisivos inferiores protruídos e vestibularizados; incisivos superiores com inclinação adequada e bem posicionados na base óssea; lábio inferior equilibrado; profundidade facial aumentada; crescimento equilibrado do eixo facial; mandíbula rotacionada no sentido horário, plano palatal com inclinação no sentido horário. Quanto à freqüência dos tipos faciais obtidos pelo índice VERT, do total da amostra estudada 50% dos indivíduos eram braquifaciais, 39,28% dolicofaciais e 10,72% mesofaciais.(AU)