Micro-raman spectroscopic characterization of a CR-39 detector

Characterization by micro-Raman spectroscopy of polymeric materials used as nuclear track detectors reveals physico-chemical and morphological information on the material's molecular structure. In this work, the nuclear track detector poly(allyl diglycol carbonate), or Columbia Resin 39 (CR-39), was characterized according to the fluence of alpha particles produced by a 226Ra source and chemical etching time. Therefore, damage of the CR-39 chemical structure due to the alpha-particle interaction with the detector was analyzed at the molecular level. It was observed that the ionization and molecular excitation of the CR-39 after the irradiation process entail cleavage of chemical bonds and formation of latent track. In addition, after the chemical etching, there is also loss of polymer structure, leading to the decrease of the group density C-O-C (∼888 cm-1), CH=CH (∼960 cm -1), C-O (∼1110 cm-1), C-O-C (∼1240 cm -1), C-O (∼1290 cm-1), C-O (∼1741 cm -1), -CH2- (∼2910 cm-1), and the main band -CH2- (∼2950 cm-1). The analyses performed after irradiation and chemical etching led to a better understanding of the CR-39 molecular structure and better comprehension of the process of the formation of the track, which is related to chemical etching kinetics. Copyright © 2013 Society for Applied Spectroscopy.

Caracterização de plantas de mamey

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Podridão floral dos citros: variabilidade, sobrevivência e controle do agente causal, Colletotrichum acutatum

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hygroscopic behavior of buriti (Mauritia flexuosa) fruit

Foram caracterizadas a casca, a polpa e a parte fibrosa do buriti (Mauritia flexuosa) e avaliados os seus comportamentos higroscópicos, visando estabelecer condições de secagem e de armazenamento para os produtos. Foram obtidas isotermas de adsorção e dessorção de umidade a 25 °C, determinado o valor da monocamada e avaliada a aplicabilidade dos modelos: Halsey, Handerson, Kuhn, Mizrahi, Oswin, Smith, BET e GAB, na predição das isotermas. A polpa foi classificada como rica em óleo de alta qualidade e juntamente com a casca e a parte fibrosa como ricas em fibra alimentar. As isotermas dos produtos foram classificadas como do tipo II e suas estabilidades microbiológicas a 25 °C asseguradas quando apresentarem umidade inferior a 8,5, 7,3 e 11,0 gH₂O.100 g^-1de base seca, respectivamente. Segundo a avaliação, os produtos serão mais bem conservados, se acondicionados em embalagens com baixa permeabilidade ao vapor de água, e os valores da monocamada indicaram que a casca, a polpa e a parte fibrosa não devem ser secas a umidades inferiores a 5,9, 5,0 e 6,4 H₂O.100 g^-1b.s., respectivamente. O modelo de GAB foi o que melhor descreveu as isotermas dos produtos.

Morphological and hematological studies of Trypanosoma spp. infecting ornamental armored catfish from Guamá River-PA, Brazil

Um total de 281 espécimes de peixes ornamentais de água doce - das espécies Leporacanthicus galaxias, Lasiancistrus saetiger, Cochliodon sp., Hypostomus sp., Pseudacanthicus spinosus, Ancistrus sp. e Rineloricaria cf. lanceolata - foram capturados na bacia hidrográfica do rio Guamá, Pará, Brasil. A infecção por Trypanosoma spp. foi inspecionada. A caracterização morfológica e morfométrica dos parasitas e os parâmetros hematológicos foram determinados. Todas as espécies foram infectadas e todos os espécimes de Leporacanthicus galaxias e Pseudacanthicus spinosus estavam parasitados. As outras espécies mostraram uma prevalência variável da infecção. Os parasitas mostraram claramente morfotipos e dimensões diferentes, e provavelmente, pertencem a espécies diferentes. A resposta hematológica à infecção variou de acordo com o hospedeiro. Em Cochliodon sp. não houve diferença entre peixes infectados e não infectados. Em outras espécies diversas modificações em alguns parâmetros hematológicos foram encontrados, mas aparentemente sem causar doença. Ressalta-se a possibilidade de introdução de parasitas em novos ambientes devido aos movimentos artificiais destes peixes ornamentais.

Induction and Morpho-Ultrastructural Analysis of Organogenic Calli of a Wild Passionfruit

This work studied a new protocol for organogenic calli induction and characterization of the morphology and ultrastructure of callogenesis in leaf explants of Passiflora gibertii N. E. Brown, a native passion fruit species from Brazil. Calli induction was performed in different growth conditions (light and dark), different MS medium salt concentrations (MS and MS half strength) and the presence or absence of coconut water. The leaf explants maintained in the dark were more responsive to bud formation. In order to reduce spending on in vitro culture, the most suitable induction medium for P. gibertii organogenesis could, therefore be the MS half strength salt concentration medium maintained in the dark. The addition of coconut water to the culture medium was essential for both calli induction and bud formation. The morphological and ultrastructural features of the organogenic calli were isodiametric cells, characterized by an organized cellular system, nucleus with prominent nucleoli, presence of starch grains and dense cytoplasm rich in endoplasmic reticulum. The scanning electron microscopy demonstrated that buds were present on these calli.

Morphologic characterization of spiked pepper's germplasm

Pimenta-de-macaco é uma espécie que possui propriedades que permitem o desenvolvimento de defensivos agrícolas naturais e medicamentos, apresentando, portanto, grande potencial de uso pela humanidade. Com o objetivo de determinar a variabilidade fenotípica, foram estudadas 41 matrizes amostradas nos Estados do Pará e Amazonas. Utilizou-se análises de componentes principais e critério de Jolliffe para descarte de variáveis, subsidiado pela correlação de Pearson. Foram necessários sete componentes para explicar 80% da variação. O rendimento de óleo essencial e o número de folhas por ramo foram sugeridos para descarte por serem as características que menos contribuíram para a variação total. A dispersão gráfica 3D formou um grupo relativamente homogêneo e contínuo, permitindo identificar um par divergente: PA-020 (Marabá-PA) e PA-035 (Santa Isabel-PA). Concluiu-se que os caracteres analisados possuem variabilidade potencialmente capaz de discriminar as matrizes, com 83,3% de tais caracteres podendo ser utilizados para este objetivo. Os genótipos divergentes, identificados na análise gráfica 3D, podem ser usados em programas de melhoramento para obtenção de genótipos superiores. A comparação com os dados moleculares, previamente existentes, de alguns desses genótipos permite concluir, também, que a caracterização molecular, apesar de apresentar certo grau de concordância com a caracterização morfológica, teve maior poder discriminatório, utilizando um menor número de genótipos e procedências, identificando grupos dissimilares e genótipos divergentes, embora analisado por método estatístico multivariado diferente.

Anatomopathological characterization of placentas from HIV+ patients associated with p24 expression

INTRODUCTION: The study of placentas from pregnant human immunodeficiency virus (HIV) positive women has become the subject of numerous studies in the literature. Morphological, viral, immune and inflammatory placental aspects have been analyzed in order to grasp the vertical transmission of the virus. OBJECTIVE: To identify the most frequent findings in the placentas by associating them with a viral antigen and correlating them with the infection of newborns. MATERIAL AND METHODS: Thirty-five placentas from HIV- positive pregnant women were pathologically and immunohistochemically analyzed with the use of p24 antibody in the period from 1992 to1997 in accordance with the routine laboratory testing from the Anatomopathological Department - Hospital Universitário Antônio Pedro - Universidade Federal Fluminense (APD/HUAP/UFF). RESULTS: The microscopic alterations detected in all cases, including those with vertical transmission, were arteriopathy in the fetal blood circulation, chorioamnionitis, perivillous fibrin deposition, syncytial knotting, villous edema and villous immaturity. No specific macroscopic or histopathological changes were found in these placentas. The neonatal infection was observed in five cases. Vertical transmission was identified in two out of five placentas that had low weight for the respective stage of pregnancy. Immunohistochemical analysis revealed 14 positive cases, two of which showed vertical transmission. The viral protein was not identified in 10 out of 14 placentas from patients who had been medicated with zidovudine (AZT). CONCLUSION: Our study has contributed to the anatomopathological investigation into placentas from HIV-positive patients, although p24 expression per se did not allow a definite and early diagnosis of the vertical transmission.

The genetic characterization of myrmelachista roger assemblages (hymenoptera: formicidae: formicinae) in the atlantic forest of southeastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultrastructure of Spermatogenesis in the Short-Tailed Fruit Bat, Carollia perspicillata ( Chiroptera: Phyllostomidae: Carollinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ethanolic extract of Mimosa caesalpiniifolia leaves: Chemical characterization and cytotoxic effect on human breast cancer MCF-7 cell line

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of natural rubber membranes using scaling laws analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morpho-structural characterization of rabbits of both sexes in the southeastern region of Brazil

Several studies have highlighted the importance of the correlation between body size and body weight. The objective of this study was to characterize the morphological structure of New Zealand White rabbits, phenotypically correlating body shape traits with body weight. For this purpose, forty rabbits, weaned at 35 days of age, were distributed in a completely randomized experimental design, consisting of two treatments (female and male) with twenty replicates each. At 88 days of age, animals were weighed to determine body weight (B W), and then the following body measures were determined using a measuring tape: ventral perimeter, thoracic perimeter, wither height, croup height, ear length, and body length. Average BW was 2,220 g, and average body measures were 34.4 cm, 28.4 cm, 8.95 cm, 10.4 cm, 10.6 cm, and 36 cm respectively. No significcmt differences between sexes were found relative to the studied traits. There was no negative correlation between body measures and BW, and, except for body length, all measures were significantly correlated with BW, with ear length and ventral perimeter presenting the highest values.

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.

Characterization of Hepatozoon spp. in Leptodactylus chaquensis and Leptodactylus podicipinus from two regions of the Pantanal, state of Mato Grosso do Sul, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)