Reference values of mechanical and thermal pain tests in a pain-free population

Quantitative sensory tests are widely used in human research to evaluate the effect of analgesics and explore altered pain mechanisms, such as central sensitization. In order to apply these tests in clinical practice, knowledge of reference values is essential. The aim of this study was to determine the reference values of pain thresholds for mechanical and thermal stimuli, as well as withdrawal time for the cold pressor test in 300 pain-free subjects. Pain detection and pain tolerance thresholds to pressure, heat and cold were determined at three body sites: (1) lower back, (2) suprascapular region and (3) second toe (for pressure) or the lateral aspect of the leg (for heat and cold). The influences of gender, age, height, weight, body-mass index (BMI), body side of testing, depression, anxiety, catastrophizing and parameters of Short-Form 36 (SF-36) were analyzed by multiple regressions. Quantile regressions were performed to define the 5th, 10th and 25th percentiles as reference values for pain hypersensitivity and the 75th, 90th and 95th percentiles as reference values for pain hyposensitivity. Gender, age and/or the interaction of age with gender were the only variables that consistently affected the pain measures. Women were more pain sensitive than men. However, the influence of gender decreased with increasing age. In conclusion, normative values of parameters related to pressure, heat and cold pain stimuli were determined. Reference values have to be stratified by body region, gender and age. The determination of these reference values will now allow the clinical application of the tests for detecting abnormal pain reactions in individual patients.

Transfer of spatial knowledge from a virtual environment to reality: Impact of route complexity and subject’s strategy on the exploration mode

The use of virtual reality as tool in the area of spatial cognition raises the question of the quality of learning transfer from a virtual to a real environment. It is first necessary to determine with healthy subjects, the cognitive aids that improve the quality of transfer and the conditions required, especially since virtual reality can be used as effective tool in cognitive rehabilitation. The purpose of this study was to investigate the influence of the exploration mode of virtual environment (Passive vs. Active) according to Route complexity (Simple vs. Complex) on the quality of spatial knowledge transfer in three spatial tasks. Ninety subjects (45 men and 45 women) participated. Spatial learning was evaluated by Wayfinding, sketch-mapping and picture classification tasks in the context of the Bordeaux district. In the Wayfinding task, results indicated that active learning in a Virtual Environment (VE) increased the performances compared to the passive learning condition, irrespective of the route complexity factor. In the Sketch-mapping task, active learning in a VE helped the subjects to transfer their spatial knowledge from the VE to reality, but only when the route was complex. In the Picture classification task, active learning in a VE when the route was complex did not help the subjects to transfer their spatial knowledge. These results are explained in terms of knowledge levels and frame/strategy of reference [SW75, PL81, TH82].

Still frame from the hour of death: Acute intracerebral hemorrhage on post-mortem computed tomography in a decomposed corpse

We report a case of an acute hypertensive, intracerebral hemorrhage on post-mortem computed tomography (PMCT) in a decomposed corpse. In clinical radiology, the appearance of blood on cross-sectional imaging is used to estimate the age of intracranial hemorrhage. The findings from this case indicate that characteristics of intracerebral blood on PMCT provide a still frame of the hemorrhage, as it was at the time of death. This observation suggests that the appearance of blood on PMCT may be used to estimate the age of an intracerebral hemorrhage but not to estimate the post-mortem interval.

Homogenization of Portuguese long-term temperature data series: Lisbon, Coimbra and Porto

Three long-term temperature data series measured in Portugal were studied to detect and correct non-climatic homogeneity breaks and are now available for future studies of climate variability. Series of monthly minimum (Tmin) and maximum (Tmax) temperatures measured in the three Portuguese meteorological stations of Lisbon (from 1856 to 2008), Coimbra (from 1865 to 2005) and Porto (from 1888 to 2001) were studied to detect and correct non-climatic homogeneity breaks. These series together with monthly series of average temperature (Taver) and temperature range (DTR) derived from them were tested in order to detect homogeneity breaks, using, firstly, metadata, secondly, a visual analysis and, thirdly, four widely used homogeneity tests: von Neumann ratio test, Buishand test, standard normal homogeneity test and Pettitt test. The homogeneity tests were used in absolute (using temperature series themselves) and relative (using sea-surface temperature anomalies series obtained from HadISST2 close to the Portuguese coast or already corrected temperature series as reference series) modes. We considered the Tmin, Tmax and DTR series as most informative for the detection of homogeneity breaks due to the fact that Tmin and Tmax could respond differently to changes in position of a thermometer or other changes in the instrument's environment; Taver series have been used, mainly, as control. The homogeneity tests show strong inhomogeneity of the original data series, which could have both internal climatic and non-climatic origins. Homogeneity breaks which have been identified by the last three mentioned homogeneity tests were compared with available metadata containing data, such as instrument changes, changes in station location and environment, observing procedures, etc. Significant homogeneity breaks (significance 95% or more) that coincide with known dates of instrumental changes have been corrected using standard procedures. It was also noted that some significant homogeneity breaks, which could not be connected to the known dates of any changes in the park of instruments or stations location and environment, could be caused by large volcanic eruptions. The corrected series were again tested for homogeneity: the corrected series were considered free of non-climatic breaks when the tests of most of monthly series showed no significant (significance 95% or more) homogeneity breaks that coincide with dates of known instrument changes. Corrected series are now available in the frame of ERA-CLIM FP7 project for future studies of climate variability.

Modelling and Simulation of Moored Devices for Ocean Currents Energy Harnessing

The main objective of this paper is the presentation of modelling solutions off loating devices that can be used for harnessing energy from ocean currents. It has been structured into three main parts. First, the growing current interest in marine renewable energy in general, and in extracting energy from currents in particular, is presented, showing the large number of solutions that are emerging and some of the most significant types. GESMEY generator is presented in second section. It is based on a new concept that has been patented by the Universidad Politécnica de Madrid and which is currently being developed through a collaborative agreement with the SOERMAR Foundation. The main feature of this generator is that on operation is fully submerged, and no other facilities are required to move to floating state for maintenance, which greatly increases its performance. Third part of the article is devoted to present the modelling and simulation challenges that arise in the development of devices for harnessing the energy of marine currents, along with some solutions which have been adopted within the frame of the GESMEY Project, making particular emphasis on the dynamics of the generator and its control

Benchmarking of COBAYA3 pin-by-pin for VVER

This paper presents results of the benchmarking of COBAYA3 pin-by-pin for VVER-1000 obtained in the frame of the EU NURISP project. The 3D lattice solver in COBAYA3 uses transport corrected multi-group diffusion approximation with side-dependent interface discontinuity factors of GET or Selengut Black Box type. The objective of this study is to test the few-group calculation scheme when using structur ed and unstructured spatial meshes. Unstructured mesh is necessary to model the water gaps between the hexagonal assemblies. The benchmark problems include pin-by-pin calculations of 2D subsets of the core and comparison with APOLLO2 and TR IPOLI4 transport reference solutions. COBAYA3 solutions in 2, 4 and 8 energy groups have been tested. The results show excellent agreement with the reference on es when using side-dependent interface discontinuity factors.

Australasian bibliography.... Catalogue of books in the Free Public Library, Sydney, relating to, or published in Australasia... Reference Library. 1869-1888.

"Class M.E. Periodical and serial literature, 1869-88", part 3, p. 109-133.

Cherbourg's Chinatown: creating an identity of place on an Australian Aboriginal settlement

This is the story of an extraordinary Aboriginal woman, Princy Carlo, and the identity of place she and her descendants fashioned within the confines of the Aboriginal settlement of Cherbourg (formerly Barambah), during the early twentieth century. The patch of Cherbourg that came to be known as 'Chinatown' has to date attracted cursory reference in historical commentary on the south-eastern Queensland Aboriginal settlement. Yet, hidden beneath what may appear as an inconsequential historical detail lies a fascinating illustration of the negotiation of place identity within a frame of triangulated group relations (Aboriginal-Chinese-White) in what remained, in essence, a colonial society. Incorporating primary written sources and oral accounts from descendants the study analyses the forging of the Chinatown identity of place through a process of 'spatial othering', eliciting features unique to this indigenous identity-construct. The study provides an insight into Aboriginal connection and kinship with land following forced removal to a government settlement, and contributes to the historical records of the Cherbourg Aboriginal community and the Eidsvold district in Queensland, Australia. (C) 2003 Elsevier Science Ltd. All rights reserved.

A fundamentális transzformáció és a referenciapont szerepe a hiányos szerződések elméletében (The role of basic transformation and reference point in the theory of incomplete contracts)

A cikk Oliver Hart és szerzőtársai modelljeinek következtetéseit hasonlítja össze Williamson tranzakciós költségekre vonatkozó nézeteivel. Megmutatja, hogy a két irányzat a vállalat vagy piac kérdéskörében más eszközöket használ, de hasonlóan érvel. Megismerkedhetünk Williamson Harttal szemben megfogalmazott azon kritikájával, hogy Hart modelljeiben az alkunak nincsenek tranzakciós költségei, illetve a kritika kritikájával is. Hart elképzeléseit támasztja alá a tulajdonjogi irányzaton belül nemrégiben kialakult referenciapont-elmélet, amely kísérleti lehetőségeket is nyújt a különböző feltételezések igazolására. ____ The article compares the conclusions from the models of Oliver Hart et al. with the views of Williamson on transaction costs. It shows that the two schools use different means on the question of the firm or the market, but similar reasoning. The author covers Williamson's criticism of Hart that there are no transaction costs in his models, and also the criticism of that criticism. Hart's notions are supported by the recently developed theory of reference point within the property-right trend, which offers chances of experimental proof of the various assumptions.

Hafnium and neodymium in surface waters of the Atlantic sector of the Southern Ocean

Radiogenic isotopes of hafnium (Hf) and neodymium (Nd) are powerful tracers for water mass transport and trace metal cycling in the present and past oceans. However, due to the scarcity of available data the processes governing their distribution are not well understood. Here we present the first combined dissolved Hf and Nd isotope and concentration data from surface waters of the Atlantic sector of the Southern Ocean. The samples were collected along the Zero Meridian, in the Weddell Sea and in the Drake Passage during RV Polarstern expeditions ANT-XXIV/3 and ANT-XXIII/3 in the frame of the International Polar Year (IPY) and the GEOTRACES program. The general distribution of Hf and Nd concentrations in the region is similar. However, at the northernmost station located 200 km southwest of Cape Town a pronounced increase of the Nd concentration is observed, whereas the Hf concentration is minimal, suggesting much less Hf than Nd is released by the weathering of the South African Archean cratonic rocks. From the southern part of the Subtropical Front (STF) to the Polar Front (PF) Hf and Nd show the lowest concentrations (<0.12 pmol/kg and 10 pmol/kg, respectively), most probably due to the low terrigenous flux in this area and efficient scavenging of Hf and Nd by biogenic opal. In the vicinity of landmasses the dissolved Hf and Nd isotope compositions are clearly labelled by terrigenous inputs. Near South Africa Nd isotope values as low as epsilon-Nd = -18.9 indicate unradiogenic inputs supplied via the Agulhas Current. Further south the isotopic data show significant increases to epsilon-Hf = 6.1 and epsilon-Nd = -4.0 documenting exchange of seawater Nd and Hf with the Antarctic Peninsula. In the open Southern Ocean the Nd isotope compositions are relatively homogeneous (epsilon-Nd ~ -8 to -8.5) towards the STF, within the Antarctic Circumpolar Current, in the Weddell Gyre, and the Drake Pasage. The Hf isotope compositions in the entire study area only show a small range between epsilon-Hf = +6.1 and +2.8 support Hf to be more readily released from young mafic rocks compared to old continental ones. The Nd isotope composition ranges from epsilon-Nd = -18.9 to -4.0 showing Nd isotopes to be a sensitive tracer for the provenance of weathering inputs into surface waters of the Southern Ocean.

Dinocyst assemblages of site HM52-43

Past sea-surface conditions over the northern North Atlantic during the last glacial maximum were examined from the study of 61 deep-sea cores. The last glacial maximum time slice studied here corresponds to an interval between Heinrich layers H2 and H1, and spanning about 20-16 ka on a 14C time scale. Transfer functions based on dinocyst assemblages were used to reconstruct sea-surface temperature, salinity, and sea-ice cover. The results illustrate extensive sea-ice cover along the eastern Canadian margins and sea-ice spreading, only during winter, over most of the northern North Atlantic. On the whole, much colder winter prevailed, despite relatively mild conditions in August (10-15°C at most offshore sites), thus suggesting a larger seasonal contrast of temperatures than today. Lower salinity than at present is reconstructed, especially along the eastern Canadian and Scandinavian margins, likely because of meltwater supply from the surrounding ice sheets. These reconstructions contrast with those established by CLIMAP on the basis of planktonic foraminifera. These differences are discussed with reference to the stratigraphical frame of the last glacial maximum, which was not the coldest phase of the last glacial stage. The respective significance of dinocyst and foraminifer records is also examined in terms of the thermohaline characteristics of surface waters and the vertical structure of upper water masses, which was apparently much more stratified than at present in the northern North Atlantic, thus preventing deep-water formation.

Evaluating consumer price perception: a mental accounting and frame dependent perspective

In this thesis, we evaluate consumer purchase behaviour from the perspective of heuristic decision making. Heuristic decision processes are quick and easy mental shortcuts, adopted by individuals to reduce the amount of time spent in decision making. In particular, we examine those heuristics which are caused by framing – prospect theory and mental accounting, and examine these within price related decision scenarios. The impact of price framing on consumer behaviour has been studied under the broad umbrella of reference price, which suggests that decision makers use reference points as standards of comparison when making a purchase decision. We investigate four reference points - a retailer's past prices, a competitor's current prices, a competitor's past prices, and consumers' expectation of immediate future price changes, to further our understanding of the impact of price framing on mental accounting, and in turn, contribute to the growing body of reference price literature in Marketing research. We carry out experiments in which levels of price frame and monetary outcomes are manipulated in repeated measures analysis of variance (ANOVA). Our results show that where these reference points are clearly specified in decision problems, price framing significantly affects consumers' perceptions of monetary gains derived through discounts, and leads to reversals in consumer preferences. We also found that monetary losses were not sensitive to price frame manipulations.

Identification of superior reference genes for data normalisation of expression studies via quantitative PCR in hybrid roses (Rosa hybrida)

Background: Gene expression studies are a prerequisite for understanding the biological function of genes. Because of its high sensitivity and easy use, quantitative PCR (qPCR) has become the gold standard for gene expression quantification. To normalise qPCR measurements between samples, the most prominent technique is the use of stably expressed endogenous control genes, the so called reference genes. However, recent studies show there is no universal reference gene for all biological questions. Roses are important ornamental plants for which there has been no evaluation of useful reference genes for gene expression studies. Results: We used three different algorithms (BestKeeper, geNorm and NormFinder) to validate the expression stability of nine candidate reference genes in different rose tissues from three different genotypes of Rosa hybrida and in leaves treated with various stress factors. The candidate genes comprised the classical "housekeeping genes" (Actin, EF-1α, GAPDH, Tubulin and Ubiquitin), and genes showing stable expression in studies in Arabidopsis (PP2A, SAND, TIP and UBC). The programs identified no single gene that showed stable expression under all of the conditions tested, and the individual rankings of the genes differed between the algorithms. Nevertheless the new candidate genes, specifically, PP2A and UBC, were ranked higher as compared to the other traditional reference genes. In general, Tubulin showed the most variable expression and should be avoided as a reference gene. Conclusions: Reference genes evaluated as suitable in experiments with Arabidopsis thaliana were stably expressed in roses under various experimental conditions. In most cases, these genes outperformed conventional reference genes, such as EF1-α and Tubulin. We identified PP2A, SAND and UBC as suitable reference genes, which in different combinations may be used for normalisation in expression analyses via qPCR for different rose tissues and stress treatments. However, the vast genetic variation found within the genus Rosa, including differences in ploidy levels, might also influence expression stability of reference genes, so that future research should also consider different genotypes and ploidy levels.

Estimation of whole body muscle, adipose/fat mass, validation in health and during weight loss. Development of prediction equations using MRI as reference method

Background: Body composition is affected by diseases, and affects responses to medical treatments, dosage of medicines, etc., while an abnormal body composition contributes to the causation of many chronic diseases. While we have reliable biochemical tests for certain nutritional parameters of body composition, such as iron or iodine status, and we have harnessed nuclear physics to estimate the body’s content of trace elements, the very basic quantification of body fat content and muscle mass remains highly problematic. Both body fat and muscle mass are vitally important, as they have opposing influences on chronic disease, but they have seldom been estimated as part of population health surveillance. Instead, most national surveys have merely reported BMI and waist, or sometimes the waist/hip ratio; these indices are convenient but do not have any specific biological meaning. Anthropometry offers a practical and inexpensive method for muscle and fat estimation in clinical and epidemiological settings; however, its use is imperfect due to many limitations, such as a shortage of reference data, misuse of terminology, unclear assumptions, and the absence of properly validated anthropometric equations. To date, anthropometric methods are not sensitive enough to detect muscle and fat loss. Aims: The aim of this thesis is to estimate Adipose/fat and muscle mass in health disease and during weight loss through; 1. evaluating and critiquing the literature, to identify the best-published prediction equations for adipose/fat and muscle mass estimation; 2. to derive and validate adipose tissue and muscle mass prediction equations; and 3.to evaluate the prediction equations along with anthropometric indices and the best equations retrieved from the literature in health, metabolic illness and during weight loss. Methods: a Systematic review using Cochrane Review method was used for reviewing muscle mass estimation papers that used MRI as the reference method. Fat mass estimation papers were critically reviewed. Mixed ethnic, age and body mass data that underwent whole body magnetic resonance imaging to quantify adipose tissue and muscle mass (dependent variable) and anthropometry (independent variable) were used in the derivation/validation analysis. Multiple regression and Bland-Altman plot were applied to evaluate the prediction equations. To determine how well the equations identify metabolic illness, English and Scottish health surveys were studied. Statistical analysis using multiple regression and binary logistic regression were applied to assess model fit and associations. Also, populations were divided into quintiles and relative risk was analysed. Finally, the prediction equations were evaluated by applying them to a pilot study of 10 subjects who underwent whole-body MRI, anthropometric measurements and muscle strength before and after weight loss to determine how well the equations identify adipose/fat mass and muscle mass change. Results: The estimation of fat mass has serious problems. Despite advances in technology and science, prediction equations for the estimation of fat mass depend on limited historical reference data and remain dependent upon assumptions that have not yet been properly validated for different population groups. Muscle mass does not have the same conceptual problems; however, its measurement is still problematic and reference data are scarce. The derivation and validation analysis in this thesis was satisfactory, compared to prediction equations in the literature they were similar or even better. Applying the prediction equations in metabolic illness and during weight loss presented an understanding on how well the equations identify metabolic illness showing significant associations with diabetes, hypertension, HbA1c and blood pressure. And moderate to high correlations with MRI-measured adipose tissue and muscle mass before and after weight loss. Conclusion: Adipose tissue mass and to an extent muscle mass can now be estimated for many purposes as population or groups means. However, these equations must not be used for assessing fatness and categorising individuals. Further exploration in different populations and health surveys would be valuable.

SIMULATIONS OF NEWTONIAN AND NON-NEWTONIAN FLOWS IN DEFORMABLE TUBES

Computational models for the investigation of flows in deformable tubes are developed and implemented in the open source computing environment OpenFOAM. Various simulations for Newtonian and non-Newtonian fluids under various flow conditions are carried out and analyzed. First, simulations are performed to investigate the flow of a shear-thinning, non-Newtonian fluid in a collapsed elastic tube and comparisons are made with experimental data. The fluid is modeled by means of the Bird-Carreau viscosity law. The computational domain of the deformed tube is constructed from data obtained via computer tomography imaging. Comparison of the computed velocity fields with the ultrasound Doppler velocity profile measurements show good agreement, as does the adjusted pressure drop along the tube's axis. Analysis of the shear rates show that the shear-thinning effect of the fluid becomes relevant in the cross-sections with the biggest deformation. The peristaltic motion is simulated by means of upper and lower rollers squeezing the fluid along a tube. Two frames of reference are considered. In the moving frame the computational domain is fixed and the coordinate system is moving with the roller speed, and in the fixed frame the roller is represented by a deforming mesh. Several two-dimensional simulations are carried out for Newtonian and non-Newtonian fluids. The effect of the shear-thinning behavior of the fluid on the transport efficiency is examined. In addition, the influence of the roller speed and the gap width between the rollers on the xxvii transport efficiency is discussed. Comparison with experimental data is also presented and different types of moving waves are implemented. In addition, the influence of the roller speed and the gap width between the rollers on the transport efficiency is discussed. Comparison with experimental data is also presented and different types of moving waves are implemented.