737 resultados para finishing


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The influence of minimum lubrication, optimized and conventional cooling at different flows and application rates of cutting fluids on the quality of hardened-steel pieces produced by external cylindrical plunge grinding with super-abrasive grinding wheels with low CBN concentrations was verified. The analysis of the quality of the pieces was performed through the assessment of the behavior of the specific energy of the grinding, roughness, roundness deviation, and the generated residual stress. By analyzing of the application ways and of the several flows and application rates of the cutting fluid, one could encounter lubrication/cooling conditions that enable the reduction in cutting fluid volume, reduction in grinding time without compromising the dimensional parameters (superficial finishing, surface integrity). Regarding the different applications of cutting fluids, it could be noted the optimized application for higher velocities has presented the best performance, demonstrating the effectiveness of the new concept of nozzle utilized.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Were used 64 weaned pigs, distributed in eight treatments: ration with skim milk (SM), three rations with crescent levels of swine plasma (SP), three rations with whole egg (WE) and a ration with high inclusion of soybean meal (SB). Daily weight gain (DWG), daily feed intake (DFI) and feed conversion (FC) were evaluated. The animals that consumed ration SB have the mean of DWG higher that other treatments, and inferior FC, from 35 to 48 days of age. The crescent levels of SP promoted linear reduction in DWG, from 21 to 35, and from 35 to 48 days of age, in DFI from 48 to 138 days of age and linear increased in FC from 21 to 35 of age. Considering the weaned phase until finishing, initial rations can be formulated with SP and WE substituted partially the CP of skim milk in 25 and 45%, respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thirty six piglets weaned at 19 days of age were useddistributed in a randomized block design, were used to evaluate the effects of the addition of crescent levels of betaine (0,0%, 0,1%, 0,2% e 0,3%) in the diets on the performance in initial, growing and finishing phases. The indexes of diarrhea incidence were monitored in the first 14 days post-weaning; and the blood parameters at 20, 75, and 150 days of age, as well as the carcass characteristics at the end of the experiment. It was not observed (P > 0,05) effect of the betaine on the diarrhea incidence. Significative differences (P < 0.05) were verified among treatments in the finishing phase for daily weight gain and feed conversion. Differences (P < 0.0001) among the days to the blood parameters analysed were also observed. In regard to the backfat thickness, it was verified significative difference (P < 0.05) among the treatments.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The lychee (Litchi chinensis Sonnerat), of the family Sapindaceae, is a highly valued fruit throughout the world. It is native to southern China, but it is cultivated in many parts of the world. In Brazil, the cultivation of the lychee was initiated in the 1970s in the State of São Paulo and has been increasing in production even though the crop size still averages only 1.4 ha per producer. The low crop size is attributed to the high cost of seedlings and the amount of time required for the plant to bear fruit. These factors discourage planting in large areas. The purpose of this research is to study some aspects of what is vitally important for the production of lychee seedlings on a large scale, with low cost and good genetic quality. Tests were performed using rootstocks from seeds of lychee and longan (Euphoria longan Lam.). Scions for grafting were taken from plants of lychee 'Bengal' in the collection of fruit species from FCAV-UNESP, Campus of Jaboticabal, Brazil. The experiments were started in September 2007 and the grafting process was performed in each month of the year finishing in August 2008. During this period the influence of these criteria were evaluated: 1) time of the year; 2) species of rootstock; 3) percentage of grafting success; 4) stem height at grafting point; 5) stem diameter at grafting point. Therefore, through statistical analysis we obtained significant differences in relation to the rootstock used, the months of the year in which the grafting was performed and the interaction between rootstock and the month in which the grafting was performed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Forty-eight pigs with 63 day olds and average weight of 23.40±1.3 kg, were allotted in a randomized block design with three treatments(0%, 10% and 20% of cottonseed meal (FA) in diets) and eight replicates with two pigs (one barrow and one gilt). The blocks were used to control changes in initial body weight. Experimental period was the growth phase (63 to 106 days old) and growing-finishing (63 to 147 days old). In each phase the diets were isonutritives, varying however the levels of crude fiber. The levels of cottonseed meal (FA) did not affect (p>0.05) the performance of animals during the growth phase or during the total period of evaluation (growingfinishing). The qualitative parameters of manure indicated that the FA determined decrease in the nitrogen and phosphorus content, but only in the growth phase. In the finishing phase the increase in the FA inclusion promoted an increase in dry matter content. Although FA can be used in up to 20% in diets for pigs in the growing and finishing phase, it is necessary to include L-lysine and soybean oil which causes an increase in cost per kg produced pig.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: The time course of mild cardiotoxicity induced by anthracycline remains unknown. The aim of this study was to evaluate the long-term evolution of decreased myocardial reserve in children previously treated with a cumulative dose of anthracycline up to 100mg/m 2. Patients and Methods: Twenty-seven asymptomatic cancer survival patients (25 with lymphoblastic leukemia), in continuous remission and off treatment for >12 months with no alterations in conventional echocardiograms were evaluated by exercise echocardiography at 37±15.4 months (T1) and 101±24 months (T2) after finishing treatment (ADRIA group). This group was compared with 25 healthy individuals (control group) similar to the ADRIA group with respect to age and body surface area (BSA). All individuals underwent treadmill exercise testing according to Bruce protocol. Echocardiograms were performed before and immediately after exercise. Results: The groups were similar regarding cardiac structure and left ventricular (LV) systolic function at rest at T1 and T2. The growth of LV posterior wall thickness related to BSA was lower in the ADRIA group at T2. Post exercise, smaller LV ejection indexes and attenuated changes in the afterload in ADRIA group were observed at T1 and T2. Conclusion: The decreased systolic reserve induced by a low dose of anthracycline in asymptomatic children and adolescents remains unaffected over a 5-year period, suggesting that positive outcomes in chronic cardiotoxicity would be expected in patients with mild impairment after anthracycline treatment. © 2011 Wiley Periodicals, Inc.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The texture of concrete blocks is very important and is often the decisive factor when choosing a product, particularly if the building specifications does not dispense with the high resistance of the blocks, but has the purpose of reducing costs with finishing, therefore preferring exposed blocks with a closer texture. Furthermore, a closer texture, especially for exteriors,may be the vital factor of the building's pathology.However, there is so far no standard to quantify the texture of a structural block. This article proposes to apply the freely available UTHSCSA-Image ToolTM program developed by the University of Texas Health Science Center at San Antonio to evaluate the texture of masonry blocks. One aspect that should never be overlooked when studying masonry blocks is compressive strength. Therefore, this work also gets the compressive strength of the blocks with and without the addition of lime. The addition of small quantities of lime proved beneficial for both texture and compressive strength. However, increasing the amount of lime proved to be feasible only to improve texture. © 2012 Taylor & Francis Group.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The reproductive efficiency of Nellore females was described on the basis of sexual precocity, staying productive in the herd (NP), maternal productivity (PM) and estimated cost for maintenance (CM). The combination of these traits resulted in the bioeconomic maternal revenue index (RMat) ensures reproductive efficiency. The index estimates the return in kilograms of live weight produced per cow per year. In addition, the composition of calf weight produced was considered, adding to the PM the information on the scores of conformation, muscling and early finishing at weaning, in order to input the calf biotype. The females considered precocious had their age at first calving before 30 months. The NP was expressed by the number of calving till 53 months of age. The CM was calculated according to the estimated feed intake of dry matter. The estimated average RMat was 62.02±24.12 kg/ cow/year. Estimates of additive genetic and residual variances for RMat, using restricted maximum likelihood under a single trait animal model was equal to 195.35 and 242.96, respectively. The heritability estimated was 0.45±0.02, indicating that RMat is inheritable and can be applied in the breeding program to improve reproductive efficiency. The NP was the main component of variation for RMat. Sires selected based on RMat tended to have more efficient daughters.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This research aimed at studying the effects of age of the cow at calving (IVP), age of the animal at yearling (IDS), the direct additive genetic (AD) and maternal (AM) effects and individual heterozygosity (HI) on visual scores of conformation (CS), early finishing (PS) and muscling (MS) at postweaning and average daily gain from weaning to yearling (GDS) of cattle used to originate the Brangus breed. There were analyzed records on 24 531, 21 166, 24 006 and 25 419 for CS, PS, MS and GDS, respectively, of animals born from 1986 to 2002 belonging to livestock files of Gensys Consultores Associados S/C Ltda. The analyses were performed by the least square method using mathematical models that included contemporary group as class variable and IVP, IDS, AD, AM and HI as covariates. IVP showed linear and quadratic effects (p<0.01) on GDS and linear (p<0.01) on PS, while the quadratic effect of IDS was not significant for PS and GDS. AD and AM were significant (p<0.01) only for PS and MS scores, respectively. All the traits were significantly (p<0.01) influenced by HI. The environmental and genetic effects were important sources of variation for the studied traits and should be taken into account when comparison of animals and selection were performed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Grinding is a parts finishing process for advanced products and surfaces. However, continuous friction between the workpiece and the grinding wheel causes the latter to lose its sharpness, thus impairing the grinding results. This is when the dressing process is required, which consists of sharpening the worn grains of the grinding wheel. The dressing conditions strongly affect the performance of the grinding operation; hence, monitoring them throughout the process can increase its efficiency. The objective of this study was to estimate the wear of a single-point dresser using intelligent systems whose inputs were obtained by the digital processing of acoustic emission signals. Two intelligent systems, the multilayer perceptron and the Kohonen neural network, were compared in terms of their classifying ability. The harmonic content of the acoustic emission signal was found to be influenced by the condition of dresser, and when used to feed the neural networks it is possible to classify the condition of the tool under study.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objectives of this study were to estimate genetic parameters involving yearling weight (Ps), carcass weight (Pc), hip height (Ag) and the scores of conformation (C), precocity (P) and musculature (M) and carcass yield (Rd) and finishing score (Ac) in Nellore cattle in order to define criteria for selection in this breed. The data of the 20 732 animals were obtained from Agrope-cuária Jacarezinho, SP. Data were analyzed by restricted maximum likelihood using animal model multi-trait analysis, which included fixed effects of contemporary groups (animals born at the same month and slaughtered on the same day) and the covariate age at slaughter (linear) for carcass traits, and contemporary groups (animals of the same farm, age, sex and management group at weaning and yearling) and yearling age (linear) for growth and as random, the additive effects and residual effects. Estimates ranged from 0.13 (Ac and Rd) to 0.36 (Ag) for heritability and from -0.59 ± 0.62 (Rd with Ac) to 0.71 ± 0.17 (Pc with C) for genetic correlations. Selection for Pc, C, P, M, Ag or Ps may be efficient because their heritability estimates are of magnitude moderate. Selection for Ps and C can favor heavier Pc, considering their positive and high genetic correlation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Surface defects are extremely important in mechanical characterization of several different materials. Therefore, the analysis of surface finishing is essential for a further simulation of surface mechanical properties in a customized project in materials science and technology. One of the methods commonly employed for such purpose is the statistical mapping of different sample surface regions using the depth from focus technique. The analysis is usually performed directly from the elevation maps which are obtained from the digital image processing. In this paper, the possibility of quantifying the surface heterogeneity of Silicon Carbide porous ceramics by elevation map histograms is presented. The advantage of this technique is that it allows the qualitative or quantitative verification of all surface image fields that cannot be done by using the Surface Plot plugin of image J™ platform commonly used in digital image processing. © 2012 Springer Science+Business Media, LLC.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Haptic information, provided by a non-rigid tool (i.e., an anchor system), can reduce body sway in individuals who perform a standing postural task. However, it was not known whether or not continuous use of the anchor system would improve postural control after its removal. Additionally, it was unclear as to whether or not frequency of use of the anchor system is related to improved control in older adults. The present study evaluated the effect of the prolonged use of the anchor system on postural control in healthy older individuals, at different frequencies of use, while they performed a postural control task (semi-tandem position). Participants were divided into three groups according to the frequency of the anchor system's use (0%, 50%, and 100%). Pre-practice phase (without anchor) was followed by a practice phase (they used the anchor system at the predefined frequency), and a post-practice phase (immediate and late-without anchor). All three groups showed a persistent effect 15. min after the end of the practice phase (immediate post-practice phase). However, only the 50% group showed a persistent effect in the late post-practice phase (24. h after finishing the practice phase). Older adults can improve their postural control by practicing the standing postural task, and use of the anchor system limited to half of their practice time can provide additional improvement in their postural control. © 2013 Elsevier B.V.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ractopamine is a β-adrenergic agonist used as an energy repartitioning agent in the diets of finishing pigs. Most ractopamine studies are limited to evaluations of growth performance and meat quality, and there is little information on the effects of this additive on the behavior and welfare of pigs. Therefore, the objective of this study was to evaluate various indicators of stress caused by feeding diets containing ractopamine. One hundred seventy barrows and 170 gilts weighing 107.3 kg were allocated to 30 pens with 10 to 12 barrows or gilts per pen. Pigs were offered 1 of the 3 dietary treatments (0, 5, or 10 mg ractopamine/kg) for 28 d with 5 barrow pens and 5 gilt pens per treatment. Pigs were evaluated for behavior 3 d per week 1 wk before the initiation of the experiment and throughout the experiment. Each pig was classified into 1 of the 13 activities (drinking water, lying alone, lying in clusters, standing, nosing pig, sitting, feeding, biting pig, walking, exploring, running away, playing, and mounting pen mates) and also grouped into 1 of the 3 categories (calm, moving, and feeding themselves) based on those activities. At the end of the experiment, 3 pigs from each pen were slaughtered, and blood samples were collected during exsanguination to determine physiological indicators of stress (cortisol, lactate, and creatine-kinase enzymes). The incidence of skin and carcass lesions was determined at shoulder, loin, and ham. Ractopamine had no effect (P > 0.05) on pig behavior, total number of skin and carcass lesions, or blood concentrations of cortisol or lactate. However, there was an increase (P < 0.05) of creatine kinase concentrations in pigs receiving ractopaminesupplemented feed. This finding is consistent with the concept that ractopamine may cause muscular disorders, and this warrants further investigation. © 2013 American Society of Animal Science. All rights reserved.