Pedagogical interventions to overcome communication apprehension in employment interviews among career students.

Career programs in the Cegep system base their training on various learning activities, which are followed by a practicum. The objective is to achieve a certain number of competencies, deemed necessary by the Ministry of Education, for entry-level occupations in to the workforce. The Graphic Communications program offered at Champlain College Saint-Lambert is a three-year career program that leads to employment in the field of graphics. Many students have part-time jobs during their schooling period but most of those jobs do not relate to their field of study. Several graduates stated they were unable to persuade employers to hire them for an externship or stage at the end of their program. While jobs are important for their general skills, since they are not directly related to the field, these jobs may not have given the students a suitable model for the conduct of an employment interview. Practice interviews may be one of many successful training methods to lower communication apprehension (CA) levels. CA is defined as "an individual's level of fear or anxiety associated with either real or anticipated communication with another person or persons." This paper examines the literature on CA and employment interviews and evaluates whether pedagogical interventions, including monitored phone calls to employers and practice-videotaped interviews, allow students to feel more confident about interviewing for a future job. A qualitative tool was used to gather scientific measurements of the participants' levels of CA both at the beginning and at the end of the Career Planning course. Open-ended reflective journals gathered quantitative data on the impact specific instructional strategies had on the participants. The pedagogical interventions that were examined and tested were as follows: preparation of scripts, monitored phone calls, videotaped practice interviews, and inclass access to professional assistance. Results indicate that all interventions had a positive impact on lowering levels of CA. It is clear that positive conclusions were drawn by the students as to usefulness of these activities. Overall, participants who responded to the reflective journal questions felt positive about the contribution of this preparatory career course to their CA levels. The results of the quantitative tool were consistent with previous research and the analysis of the reflective journals gave additional support to the usefulness of the interventions on students' confidence levels. Recommandations for improvements to the curriculum include the need for students to be taugh formally about metacognition and how to monitor it. Students need to be exposed to videotaped interviews more often. They should be better prepared for unexpected interview questions, and they should experience formal rehearsals with one of their instructors before the actual practice interview. Some of these recommendations have already been successfully implemented in the program's curriculum.||Résumé:Le but de ce travail était de vérifier si certaines activités pédagogiques sont efficaces pour faire baisser le niveau d'anxiété lié à la communication orale lors de leurs entrevues d'embauche. L'objectif des programmes techniques au Québec est de fournir aux étudiants un certain nombre de compétences définies par le ministèe de l'Éducation, des Loisirs et du Sport afin que ces derniers puissent fournir des services de techniciens spécialisés aux entreprises. Le programme nommé Office Systems Technology (412) du collège Champlain de Saint-Lambert, a choisi la voie de la spécialisation en microédition et hypermédia en 1999 et a changé son nom pour Graphic Communications en 2005. Les programmes techniques au Cégep incluent un stage en milieu de travail à la fin d'un programme de trois ans et par le fait même, une entrevue pour obtenir un stage en entreprise. La compétence visée par cette étude est l'intégration au marché du travail et le cheminement professionnel des étudiants. Lors d'enquêtes informelles, plusieurs étudiants du programme ont fait part de leurs difficultés à trouver un stage en fin d'études. Certains auteurs suggèrent que ces étudiants n'ont pas de modèles appropriés lors de la tenue d'une entrevue d'emploi. Ils proposent de diminuer le niveau d'anxiété lié à la communication orale lors d'entrevues d'embauche en offrant des pratiques d'entrevue aux étudiants. Cette recherche a examiné la littérature au sujet de l'anxiété de communication, plus précisément lors d'entrevues. Elle avait pour mandat d'évaluer si les activités pédagogiques d'un cours de préparation à la carrière ont été efficaces pour faire baisser les taux d'anxiété en communication orale lors d'entrevues. En plus, une conseillère à l'emploi fut invitée à plusieurs reprises afin de fournir un support professionnel en classe, étant donné que les étudiants ne prennent pas nécessairement le temps de consulter des professionnels en raison de leurs activités personnelles trop nombreuses. Le type d'enseignement évalué est considéré comme stratégique, étant donné qu'il agit au niveau cognitif et métacognitif de l'étudiant. Le cours de préparation à l'emploi débute par la vérification des acquis antérieurs des étudiants et il tient compte de leur motivation scolaire et professionnelle. De plus, il est axé sur la construction du savoir en proposant des activités de plus en plus complexes, débutant par la rédaction de textes à utiliser lors d'appels aux employeurs, en passant par la préparation et la pratique d'appels et se terminant par des entrevues d'emploi qui serviront de modèle à perfectionner par chaque étudiant. Ces entrevues se font avec des employeurs qui ont déjà embauché des étudiants du programme de Graphic Communications au collège Champlain de Saint-Lambert et sont enregistrées sur bande vidéo afin de permettre une visualisation ultérieure et cohérente avec les objectifs visés. La méthodologie de cette recherche inclut deux outils, un quantitatif et un qualitatif. L'outil quantitatif permet de mesurer scientifiquement les taux d'appréhension en communication des étudiants au début et à la fin du cours de préparation à l'emploi. Cet outil est la fusion de deux outils, le Personal Report of Communication Apprehension ou PRCA-24, qui fut développé par McCroskey (1984), en tandem avec celui de Wongprasert & Ayres (2000), qui lui met l'accent sur les entrevues d'emploi. Les réponses à cet outil combiné sont évaluées sur une échelle Likert de cinq points. L'outil qualitatif est une série de questions auxquelles les étudiants ont répondu quatre fois lors de la session. Les réponses à ces questions ont été analysées et les commentaires des étudiants évalués. Il découle de cette analyse que les niveaux d'anxiété des étudiants qui ont participé (14) étaient définitivement à la baisse en fin de cours. La pratique téléphonique structurée, dans un laboratoire avec les téléphones, a été très révélatrice pour les étudiants. Ils ont appris comment utiliser un script comme piste de départ pour un appel et qu'il était possible de contourner certains obstacles de façon professionnelle. Ensuite, lors d'une visite d'une compagnie de graphisme, ils ont pu observer divers modèles d'emploi. Ils ont eu la possibilité de poser des questions sur le fonctionnement et les besoins de l'entreprise. Ceci facilita la rédaction de leur curriculum vitae en leur permettant de mieux décrire leurs acquis en fonction d'emplois recherchés. Par la suite, ils se sont préparés pour une pratique d'entrevue, filmée. Les interviewers avaient déjà travaillé avec le collège et avaient déjà embauché certains étudiants de ce programme, donc ils connaissaient leur potentiel. Une liste de questions possibles fut suggérée mais il n'en restait pas moins que les interviewers pouvaient les modifier, ceci étant représentatif du marché de l'emploi. Même si le collège fournit un enseignement en anglais, un des intervieweurs donna ses entrevues en français. Trois étudiants se sont portés volontaires, mais deux ont constaté qu'ils auraient dû pratiquer leur script en français avant l'entrevue pour mieux diminuer leur niveau d'anxiété. Finalement, les étudiants durent visionner leur segment d'entrevue : ceci leur a permis de voir si leur attitude non-verbale concordait avec ce qu'ils ressentaient en entrevue et d'emmener les correctifs appropriés. Les taux d'anxiété furent vérifiés une deuxième fois en fin de session et les résultats ont démontré une baisse des taux d'appréhension. Les résultats de cette étude concordent donc avec ceux trouvés dans la littérature et donnent de bonnes pistes pour l'amélioration de ce cours de préparation à la carrière. L'auteur recommande d'enseigner la métacognition de façon formelle et ainsi de faciliter la prise de conscience des apprentissages que les étudiants effectuent. De plus, les étudiants devraient être filmés en studio au moins une fois par année pour diminuer le facteur de stress causé par les caméras et finalement ils pourraient certainement bénéficier de pratiques formelles d'entrevue avec un instructeur avant l'entrevue filmée. L'augmentation des pratiques a déjà été mise en oeuvre dans le programme et des résultats positifs se sont ensuivis.

Spirituality in the Undergraduate Curricula of Nursing Schools in Portugal and São Paulo-Brazil

Spirituality is considered a dimension of nursing care, which is often recognized as being neglected, mainly due to a lack of education. Several studies have addressed nursing students’ perceptions and skills for providing spiritual care, but there is little evidence on how spirituality is addressed in undergraduate nursing curricula. This study comprised Portuguese and Brazilian nursing schools (from São Paulo) and describes how spirituality is addressed in undergraduate nursing curricula. It is descriptive and the survey research was performed in 2014–2015. The questionnaire was composed of closed and open-ended questions and was sent by e-mail. A total of 129 answers were obtained, mostly from Portugal. Results indicated that several curricular units include spirituality, although having different contents. The learning outcomes are consistent with improving nursing students’ integral education, developing the clinical reasoning regarding spirituality, and improving the assessment of the patient across the life span. Nevertheless, it seems that spirituality is poorly addressed in clinical practice. Few nursing schools have courses or curricular units specifically dealing with spirituality, but they do provide some form of teaching on the subject. No standard curriculum exists, but teachers believe that it is a very important subject that should be included in the courses taught.

Women`s opinions about mode of birth in Brazil: a qualitative study in a public teaching hospital

Objective: to describe women`s feelings about mode of birth. Design: exploratory descriptive design. Semi-structured interviews were conducted using a questionnaire that had been developed previously (categorical data and open-and closed-ended questions). Qualitative analysis of the results was performed through a context analysis technique. Setting: the largest public university hospital in Brazil. Participants: 48 women in their third trimester of pregnancy. Findings: most women expressed a preference for vaginal birth, as they perceived that they would have a faster recovery. Women who expressed a preference for caesarean section did so because of lack of pain during the birth and the need for tubal sterilisation. The majority of women considered it important to have experience with a mode of birth in order to choose a preference. Complications associated with maternal illness were very influential in the decision-making process. Key conclusions: these results provide a useful first step towards the identification of aspects of women`s feelings about modes of birth. Most women expressed a preference for vaginal birth. Further exploration of women`s feelings regarding parturition and the decision-making process is required. (C) 2008 Elsevier Ltd. All rights reserved.

Wave trapping in a two-dimensional sound-soft or sound-hard acoustic waveguide of slowly-varying width

In this paper we derive novel approximations to trapped waves in a two-dimensional acoustic waveguide whose walls vary slowly along the guide, and at which either Dirichlet (sound-soft) or Neumann (sound-hard) conditions are imposed. The guide contains a single smoothly bulging region of arbitrary amplitude, but is otherwise straight, and the modes are trapped within this localised increase in width. Using a similar approach to that in Rienstra (2003), a WKBJ-type expansion yields an approximate expression for the modes which can be present, which display either propagating or evanescent behaviour; matched asymptotic expansions are then used to derive connection formulae which bridge the gap across the cut-off between propagating and evanescent solutions in a tapering waveguide. A uniform expansion is then determined, and it is shown that appropriate zeros of this expansion correspond to trapped mode wavenumbers; the trapped modes themselves are then approximated by the uniform expansion. Numerical results determined via a standard iterative method are then compared to results of the full linear problem calculated using a spectral method, and the two are shown to be in excellent agreement, even when $\epsilon$, the parameter characterising the slow variations of the guide’s walls, is relatively large.

RF-sputter fabrication of magnetic garnet thin films and simulation modeling for 1-D magnetic photonic crystal waveguide devices

One dimensional magnetic photonic crystals (1D-MPC) are promising structures for integrated optical isolator applications. Rare earth substituted garnet thin films with proper Faraday rotation are required to fabricate planar 1D-MPCs. In this thesis, flat-top response 1D-MPC was proposed and spectral responses and Faraday rotation were modeled. Bismuth substituted iron garnet films were fabricated by RF magnetron sputtering and structures, compositions, birefringence and magnetooptical properties were studied. Double layer structures for single mode propagation were also fabricated by sputtering for the first time. Multilayer stacks with multiple defects (phase shift) composed of Ce-YIG and GGG quarter-wave plates were simulated by the transfer matrix method. The transmission and Faraday rotation characteristics were theoretically studied. It is found that flat-top response, with 100% transmission and near 45o rotation is achievable by adjusting the inter-defect spacing, for film structures as thin as 30 to 35 μm. This is better than 3-fold reduction in length compared to the best Ce-YIG films for comparable rotations, thus allows a considerable reduction in size in manufactured optical isolators. Transmission bands as wide as 7nm were predicted, which is considerable improvement over 2 defects structure. Effect of repetition number and ratio factor on transmission and Faraday rotation ripple factors for the case of 3 and 4 defects structure has been discussed. Diffraction across the structure corresponds to a longer optical path length. Thus the use of guided optics is required to minimize the insertion losses in integrated devices. This part is discussed in chapter 2 in this thesis. Bismuth substituted iron garnet thin films were prepared by RF magnetron sputtering. We investigated or measured the deposition parameters optimization, crystallinity, surface morphologies, composition, magnetic and magnetooptical properties. A very high crystalline quality garnet film with smooth surface has been heteroepitaxially grown on (111) GGG substrate for films less than 1μm. Dual layer structures with two distinct XRD peaks (within a single sputtered film) start to develop when films exceed this thickness. The development of dual layer structure was explained by compositional gradient across film thickness, rather than strain gradient proposed by other authors. Lower DC self bias or higher substrate temperature is found to help to delay the appearance of the 2nd layer. The deposited films show in-plane magnetization, which is advantageous for waveguide devices application. Propagation losses of fabricated waveguides can be decreased by annealing in an oxygen atmosphere from 25dB/cm to 10dB/cm. The Faraday rotation at λ=1.55μm were also measured for the waveguides. FR is small (10° for a 3mm long waveguide), due to the presence of linear birefringence. This part is covered in chapter 4. We also investigated the elimination of linear birefringence by thickness tuning method for our sputtered films. We examined the compressively and tensilely strained films and analyze the photoelastic response of the sputter deposited garnet films. It has been found that the net birefringence can be eliminated under planar compressive strain conditions by sputtering. Bi-layer GGG on garnet thin film yields a reduced birefringence. Temperature control during the sputter deposition of GGG cover layer is critical and strongly influences the magnetization and birefringence level in the waveguide. High temperature deposition lowers the magnetization and increases the linear birefringence in the garnet films. Double layer single mode structures fabricated by sputtering were also studied. The double layer, which shows an in-plane magnetization, has an increased RMS roughness upon upper layer deposition. The single mode characteristic was confirmed by prism coupler measurement. This part is discussed in chapter 5.

Enhancing Optical Isolator Performance in Nonreciprocal Waveguide Arrays

We investigate the operation of optical isolators based on magneto-optics waveguide arrays beyond the coupled mode analysis. Semi-vectorial beam propagation simulations demonstrate that evanescent tail coupling and the effects of radiation are responsible for degrading the device’s performance. Our analysis suggests that these effects can be mitigated when the array size is scaled up. In addition, we propose the use of radiation blockers in order to offset some of these effects, and we show that they provide a dramatic improvement in performance. Finally, we also study the robustness of the system with respect to fabrication tolerances using the coupled mode theory. We show that small, random variations in the system’s parameters tend to average out as the number of optical guiding channels increases.

Electromagnetic analysis of periodic structures under a waveguide viewpoint

The fundamental objective of this Ph. D. dissertation is to demonstrate that, under particular circumstances which cover most of the structures with practical interest, periodic structures can be understood and analyzed by means of closed waveguide theories and techniques. To that aim, in the first place a transversely periodic cylindrical structure is considered and the wave equation, under a combination of perfectly conducting and periodic boundary conditions, is studied. This theoretical study runs parallel to the classic analysis of perfectly conducting closed waveguides. Under the light shed by the aforementioned study it is clear that, under certain very common periodicity conditions, transversely periodic cylindrical structures share a lot of properties with closed waveguides. Particularly, they can be characterized by a complete set of TEM, TE and TM modes. As a result, this Ph. D. dissertation introduces the transversely periodic waveguide concept. Once the analogies between the modes of a transversely periodic waveguide and the ones of a closed waveguide have been established, a generalization of a well-known closed waveguide characterization method, the generalized Transverse Resonance Technique, is developed for the obtention of transversely periodic modes. At this point, all the necessary elements for the consideration of discontinuities between two different transversely periodic waveguides are at our disposal. The analysis of this type of discontinuities will be carried out by means of another well known closed waveguide method, the Mode Matching technique. This Ph. D. dissertation contains a sufficient number of examples, including the analysis of a wire-medium slab, a cross-shaped patches periodic surface and a parallel plate waveguide with a textured surface, that demonstrate that the Transverse Resonance Technique - Mode Matching hybrid is highly precise, efficient and versatile. Thus, the initial statement: ”periodic structures can be understood and analyzed by means of closed waveguide theories and techniques”, will be corroborated. Finally, this Ph. D. dissertation contains an adaptation of the aforementioned generalized Transverse Resonance Technique by means of which the analysis of laterally open periodic waveguides, such as the well known Substrate Integrated Waveguides, can be carried out without any approximation. The analysis of this type of structures has suscitated a lot of interest in the recent past and the previous analysis techniques proposed always resorted to some kind of fictitious wall to close the structure. vii Resumen El principal objetivo de esta tesis doctoral es demostrar que, bajo ciertas circunstancias que se cumplen para la gran mayoría de estructuras con interés práctico, las estructuras periódicas se pueden analizar y entender con conceptos y técnicas propias de las guías de onda cerradas. Para ello, en un primer lugar se considera una estructura cilíndrical transversalmente periódica y se estudia la ecuación de onda bajo una combinación de condiciones de contorno periódicas y de conductor perfecto. Este estudio teórico y de caracter general, sigue el análisis clásico de las guías de onda cerradas por conductor eléctrico perfecto. A la luz de los resultados queda claro que, bajo ciertas condiciones de periodicidad (muy comunes en la práctica) las estructuras cilíndricas transversalmente periódicas guardan multitud de analogías con las guías de onda cerradas. En particular, pueden ser descritas mediante un conjunto completo de modos TEM, TE y TM. Por ello, ésta tesis introduce el concepto de guía de onda transversalmente periódica. Una vez establecidas las similitudes entre las soluciones de la ecuación de onda, bajo una combinación de condiciones de contorno periódicas y de conductor perfecto, y los modos de guías de onda cerradas, se lleva a cabo, con éxito, la adaptación de un conocido método de caracterización de guías de onda cerradas, la técnica de la Resonancia Transversal Generalizada, para la obtención de los modos de guías transversalmente periódicas. En este punto, se tienen todos los elementos necesarios para considerar discontinuidades entre guías de onda transversalmente periódicas. El analisis de este tipo de discontinuidades se llevará a cabo mediante otro conocido método de análisis de estructuras cerradas, el Ajuste Modal. Esta tesis muestra multitud de ejemplos, como por ejemplo el análisis de un wire-medium slab, una superficie de parches con forma de cruz o una guía de placas paralelas donde una de dichas placas tiene cierta textura, en los que se demuestra que el método híbrido formado por la Resonancia Transversal Generalizada y el Ajuste Modal, es tremendamente preciso, eficiente y versátil y confirmará la validez de el enunciado inicial: ”las estructuras periódicas se pueden analizar y entender con conceptos y técnicas propias de las guías de onda cerradas” Para terminar, esta tésis doctoral incluye también una modificación de la técnica de la Resonancia Transversal Generalizada mediante la cual es posible abordar el análisis de estructuras periódica abiertas en los laterales, como por ejemplo las famosas guías de onda integradas en sustrato, sin ninguna aproximación. El análisis de este tipo de estructuras ha despertado mucho interés en los últimos años y las técnicas de análisis propuestas hasta ix el momento acostumbran a recurrir a algún tipo de pared ficticia para simular el carácter abierto de la estructura.

Evaluation of the PV cell operation temperature in the process of fast switching to open-circuit mode

A procedure for measuring the overheating temperature (ΔT ) of a p-n junction area in the structure of photovoltaic (PV) cells converting laser or solar radiations relative to the ambient temperature has been proposed for the conditions of connecting to an electric load. The basis of the procedure is the measurement of the open-circuit voltage (VO C ) during the initial time period after the fast disconnection of the external resistive load. The simultaneous temperature control on an external heated part of a PV module gives the means for determining the value of VO C at ambient temperature. Comparing it with that measured after switching OFF the load makes the calculation of ΔT possible. Calibration data on the VO C = f(T ) dependences for single-junction AlGaAs/GaAs and triple-junction InGaP/GaAs/Ge PV cells are presented. The temperature dynamics in the PV cells has been determined under flash illumination and during fast commutation of the load. Temperature measurements were taken in two cases: converting continuous laser power by single-junction cells and converting solar power by triple-junction cells operating in the concentrator modules.

Mode locking of semiconductor laser with curved waveguide and passive mode expander

Active mode locking is reported for a 1.55 μm semiconductor laser with a curved waveguide and passive mode expander, placed in a wavelength tunable external cavity. One facet with a very low reflectivity of 8×10−6 is achieved through a curved active region that tapers into an underlying passive waveguide, thus expanding the mode to give reduced divergence. 10 GHz pulses of 3.1 ps duration have been generated, with a linewidth of 0.81 nm.

Direct power control with common mode voltage elimination for open-winding brushless doubly-fed wind power generators

In this paper, a new open-winding control strategy is proposed for a brushless doubly-fed reluctance generator (BDFRG) applicable for wind turbines. The BDFRG control winding is fed via a dual two-level three-phase converter using a single dc bus. Direct power control based on maximum power point tracking with common mode voltage elimination is designed, which not only the active and reactive power is decoupled, but the reliability and redundancy are all improved greatly by increasing the switching modes of operation, while DC-link voltage and rating of power devices decreased by 50% comparing to the traditional three-level converter systems. Consequently its effectiveness is evaluated by simulation tests based on a 42-kW prototype generator.

Efficient Computation of Electromagnetic Waves in Hydrocarbon Exploration Using the Improved Numerical Mode Matching (NMM) Method

In this study, we developed and improved the numerical mode matching (NMM) method which has previously been shown to be a fast and robust semi-analytical solver to investigate the propagation of electromagnetic (EM) waves in an isotropic layered medium. The applicable models, such as cylindrical waveguide, optical fiber, and borehole with earth geological formation, are generally modeled as an axisymmetric structure which is an orthogonal-plano-cylindrically layered (OPCL) medium consisting of materials stratified planarly and layered concentrically in the orthogonal directions.

In this report, several important improvements have been made to extend applications of this efficient solver to the anisotropic OCPL medium. The formulas for anisotropic media with three different diagonal elements in the cylindrical coordinate system are deduced to expand its application to more general materials. The perfectly matched layer (PML) is incorporated along the radial direction as an absorbing boundary condition (ABC) to make the NMM method more accurate and efficient for wave diffusion problems in unbounded media and applicable to scattering problems with lossless media. We manipulate the weak form of Maxwell's equations and impose the correct boundary conditions at the cylindrical axis to solve the singularity problem which is ignored by all previous researchers. The spectral element method (SEM) is introduced to more efficiently compute the eigenmodes of higher accuracy with less unknowns, achieving a faster mode matching procedure between different horizontal layers. We also prove the relationship of the field between opposite mode indices for different types of excitations, which can reduce the computational time by half. The formulas for computing EM fields excited by an electric or magnetic dipole located at any position with an arbitrary orientation are deduced. And the excitation are generalized to line and surface current sources which can extend the application of NMM to the simulations of controlled source electromagnetic techniques. Numerical simulations have demonstrated the efficiency and accuracy of this method.

Finally, the improved numerical mode matching (NMM) method is introduced to efficiently compute the electromagnetic response of the induction tool from orthogonal transverse hydraulic fractures in open or cased boreholes in hydrocarbon exploration. The hydraulic fracture is modeled as a slim circular disk which is symmetric with respect to the borehole axis and filled with electrically conductive or magnetic proppant. The NMM solver is first validated by comparing the normalized secondary field with experimental measurements and a commercial software. Then we analyze quantitatively the induction response sensitivity of the fracture with different parameters, such as length, conductivity and permeability of the filled proppant, to evaluate the effectiveness of the induction logging tool for fracture detection and mapping. Casings with different thicknesses, conductivities and permeabilities are modeled together with the fractures in boreholes to investigate their effects for fracture detection. It reveals that the normalized secondary field will not be weakened at low frequencies, ensuring the induction tool is still applicable for fracture detection, though the attenuation of electromagnetic field through the casing is significant. A hybrid approach combining the NMM method and BCGS-FFT solver based integral equation has been proposed to efficiently simulate the open or cased borehole with tilted fractures which is a non-axisymmetric model.

OCCURRENCE AND ANTIBIOTIC SENSIBILITY PROFILE OF Salmonella spp. ISOLATED FROM PORK MEAT CUTS COMMERCIALIZED IN THE OPEN MARKETS IN PELOTAS, RS (BRAZIL)

The objective of the present study was to evaluate the occurrence of Salmonella spp. in 15 samples of pork meat cuts (T-bone, shank, sausage and ribs) commercialized in open markets of Pelotas (RS, Brazil) and verify the prevalent serovars, and test the isolates profile of sensitivity to several antibiotics of importance in medicine (nalidixic acid, ampicillin, aztreonam, kanamycin, carbenicillin, cephalothin, cefoxitin, ceftriaxone, ciprofloxacin, chloramphenicol, gentamicin, sulfonamide, tetracycline and trimetoprina). Twelve samples (80%) were contaminated by Salmonella enterica, serovars Infantis, Derby, Panama and Typhimurium. All isolates were susceptible to trimetoprin, aztreonam, ciprofloxacin, ceftriaxone and cefoxitin. For the other antibiotics, the pattern of sensitivity varied as serovar. In addition, 39.1% of isolates showed up to be multiresistant.

Seasonal dynamics of a drosophilid (Diptera) assemblage and its potencial as bioindicator in open environments

Drosophila Fallen, 1823 (Diptera, Drosophilidae) is for long a well-established model organism for genetics and evolutionary research. The ecology of these flies, however, has only recently been better studied. Recent papers show that Drosophila assemblies can be used as bioindicators of forested environment degradation. In this work the bioindicator potential of drosophilids was evaluated in a naturally opened environment, a coastal strand-forest (restinga). Data from nine consecutive seasonal collections revealed strong temporal fluctuation pattern of the majority of Drosophila species groups. Drosophila willistoni group was more abundant at autumns, whereas D. cardini and D. tripunctata groups were, respectively, expressive at winters and springs, and D. repleta group at both seasons. The exotic species D. simulans Sturtevant, 1919 (from D. melanogaster group) and Zaprionus indianus Gupta, 1970 were most abundant at summers. Overall, the assemblage structure did not show the same characteristics of forested or urban environments, but was similar to the forests at winters and to cities at summers. This raises the question that this locality may already been under urbanization impact. Also, this can be interpreted as an easily invaded site for exotic species, what might lead to biotic homogenization and therefore can put in check the usage of drosophilid assemblages as bioindicators at open environments.

Comparison of videolaparoscopic versus open surgery for benign renal diseases in children

Introduction: Laparoscopic nephrectomy in children has become a reasonable alternative to open nephrectomy and has replaced open surgery for many renal diseases. The purpose of our study is to evaluate transperitoneal videolaparoscopic procedures in renal benign diseases in comparison to an open surgery approach. Patients and methods: 34 children aged between 17 days and 15 years old (mean 6.14) were divided into two groups in order to be submitted to nephrectomy. The first one underwent transperitoneal videolaparoscopic nephrectomy and was composed by 21 patients aged from 2 months to 15 years (mean 7.42), from which 12 were females and 9 males. The second group was submitted to open nephrectomy and was composed by 13 patients aged from 17 days to 11 years (mean 3.91), 6 females and 7 males. The groups were compared regarding anesthesic time, operative time, length of hospital stay, postoperative pain and time of reintroduction of oral intake. Short and long term complications were also evaluated. Statistical analysis was performed by Student t-test with the level of significance set at P < 0.05. The study was previously approved by the Committee on Ethics in Research of our institution. Results: Significant statistical difference was observed only for the variable length of hospital stay. No laparoscopy group case was converted to open surgery. There was no immediate or late complication. Blood loss was negligible and no transfusion was required. Conclusions: In our experience, transperitoneal videolaparoscopic nephrectomy has similar results to open nephrectomy, except for time of hospitalization. (C) 2009 AEU. Published by Elsevier Espana, S.L. All rights reserved.

Alpha-Tricalcium Phosphate Bone Cement in the Surgical Treatment of Open Mastoid Cavity

Hypothesis: This study aimed to evaluate the biocompatibility of alpha-tricalcium phosphate bone cement in the obliteration of the mastoid cavity in guinea pigs. Background: Treatment with open cavity mastoidectomy can present poor functional results in chronic otitis media with cholesteatoma, especially if the cavity is large. Partial or total obliteration of the cavity can overcome these problems. Alpha-tricalcium phosphate bone cement has physicochemical characteristics that suggest its potential in mastoid cavity obliteration. Materials and Methods: Twenty guinea pigs were studied. All animals underwent surgery involving the dorsal tympanic bulla. In the study group animals (n = 10), mastoid cavity obliteration was performed with alpha-tricalcium phosphate bone cement. In the control group animals (n = 10), the cavity was left unfilled. On postoperative day 60, the animals were sacrificed and studied for signs of rejection of the material and other complications. Temporal bones were removed for histopathological study, in which the type and degree of inflammatory response, as well as the degree of ossification, were analyzed. Results: The mortality rate was the same in both groups. Deaths were attributed to anesthetic complications in the initial postoperative period. In the animals that survived, there were no complications, and there was good healing of the incision in both groups. There were no clinical signs of rejection of the material, and the histopathological analysis of the cement group revealed no signs of foreign body reaction (inflammatory response). Conclusion: Alpha-tricalcium phosphate bone cement is biocompatible in the mastoid cavity of guinea pigs.