(Table B2) Relative abundances of diatom species used in the Canoco analysis at sediment surface samples from the Chinese inshore waters

Canonical correspondence analysis has been used to analyze and to visualize the relationships between the main species and selected environmental variables in a study of diatoms from surface sediment samples in Chinese inshore waters. The result shows that the diatom distribution in Chinese inshore waters is closely correlated with the environmental variables and that the measured environmental variables account for the major changes of the diatom composition. Winter sea-surface temperature (WST), winter sea-surface salinity (WSS), water depth and summer sea-surface salinity (SSS) play an important role for the diatom distribution. Among the environmental factors, winter sea-surface temperature is the most important, controlling the distribution of diatoms in the surface sediments in Chinese inshore waters, and therefore, it may be potentially reconstructed in palaeoceanographic studies. Three diatom assemblages are distinguished, representing environments with different hydrological characteristics. The temperate-water diatom assemblage may be used as an indicator of the coastal circulation system of Bohai Sea and Yellow Sea. While the warm-temperate water diatom assemblage is closely related to Shanghai-Zhejiang-Fujian coastal currents and Northern Bay coastal currents of South China Sea. The deep water diatom assemblage is a response to that the waters are less controlled by coastal currents, but are more influenced by open sea currents, such as Kuroshio.

A method to incorporate the effect of taxonomic uncertainty on multivariate analyses of ecological data

Researchers in ecology commonly use multivariate analyses (e.g. redundancy analysis, canonical correspondence analysis, Mantel correlation, multivariate analysis of variance) to interpret patterns in biological data and relate these patterns to environmental predictors. There has been, however, little recognition of the errors associated with biological data and the influence that these may have on predictions derived from ecological hypotheses. We present a permutational method that assesses the effects of taxonomic uncertainty on the multivariate analyses typically used in the analysis of ecological data. The procedure is based on iterative randomizations that randomly re-assign non identified species in each site to any of the other species found in the remaining sites. After each re-assignment of species identities, the multivariate method at stake is run and a parameter of interest is calculated. Consequently, one can estimate a range of plausible values for the parameter of interest under different scenarios of re-assigned species identities. We demonstrate the use of our approach in the calculation of two parameters with an example involving tropical tree species from western Amazonia: 1) the Mantel correlation between compositional similarity and environmental distances between pairs of sites, and; 2) the variance explained by environmental predictors in redundancy analysis (RDA). We also investigated the effects of increasing taxonomic uncertainty (i.e. number of unidentified species), and the taxonomic resolution at which morphospecies are determined (genus-resolution, family-resolution, or fully undetermined species) on the uncertainty range of these parameters. To achieve this, we performed simulations on a tree dataset from southern Mexico by randomly selecting a portion of the species contained in the dataset and classifying them as unidentified at each level of decreasing taxonomic resolution. An analysis of covariance showed that both taxonomic uncertainty and resolution significantly influence the uncertainty range of the resulting parameters. Increasing taxonomic uncertainty expands our uncertainty of the parameters estimated both in the Mantel test and RDA. The effects of increasing taxonomic resolution, however, are not as evident. The method presented in this study improves the traditional approaches to study compositional change in ecological communities by accounting for some of the uncertainty inherent to biological data. We hope that this approach can be routinely used to estimate any parameter of interest obtained from compositional data tables when faced with taxonomic uncertainty.

Modelling the Impact of Built Environment, Geographical Scales and Latent Constructs On Individual Travel Behaviour

La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.

Molecular analysis of endo-β-mannanase genes upon seed imbibition suggest a cross-talk between radicle and micropylar endosperm during germination of Arabidopsis thaliana.

The endo-β-mannanase (MAN) family is represented in the Arabidopsis genome by eight members, all with canonical signal peptides and only half of them being expressed in germinating seeds. The transcripts of these genes were localized in the radicle and micropylar endosperm (ME) before radicle protrusion and this expression disappears as soon as the endosperm is broken by the emerging radicle tip. However, only three of these MAN genes, AtMAN5, AtMAN7 and especially AtMAN6 influence the germination time (t50) as assessed by the analysis of the corresponding knock-out lines. The data suggest a possible interaction between embryo and ME regarding the role of MAN during the Arabidopsis germination process.

Projector Model for Efficient List-Mode Reconstruction in PET Scanners with Parallel Planar Detectors

We have developed a new projector model specifically tailored for fast list-mode tomographic reconstructions in Positron emission tomography (PET) scanners with parallel planar detectors. The model provides an accurate estimation of the probability distribution of coincidence events defined by pairs of scintillating crystals. This distribution is parameterized with 2D elliptical Gaussian functions defined in planes perpendicular to the main axis of the tube of response (TOR). The parameters of these Gaussian functions have been obtained by fitting Monte Carlo simulations that include positron range, acolinearity of gamma rays, as well as detector attenuation and scatter effects. The proposed model has been applied efficiently to list-mode reconstruction algorithms. Evaluation with Monte Carlo simulations over a rotating high resolution PET scanner indicates that this model allows to obtain better recovery to noise ratio in OSEM (ordered-subsets, expectation-maximization) reconstruction, if compared to list-mode reconstruction with symmetric circular Gaussian TOR model, and histogram-based OSEM with precalculated system matrix using Monte Carlo simulated models and symmetries.

Four Decades of Studying Global Linear Instability: Progress and Challenges

Global linear instability theory is concerned with the temporal or spatial development of small-amplitude perturbations superposed upon laminar steady or time-periodic three-dimensional flows, which are inhomogeneous in two(and periodic in one)or all three spatial directions.After a brief exposition of the theory,some recent advances are reported. First, results are presented on the implementation of a Jacobian-free Newton–Krylov time-stepping method into a standard finite-volume aerodynamic code to obtain global linear instability results in flows of industrial interest. Second, connections are sought between established and more-modern approaches for structure identification in flows, such as proper orthogonal decomposition and Koopman modes analysis (dynamic mode decomposition), and the possibility to connect solutions of the eigenvalue problem obtained by matrix formation or time-stepping with those delivered by dynamic mode decomposition, residual algorithm, and proper orthogonal decomposition analysis is highlighted in the laminar regime; turbulent and three-dimensional flows are identified as open areas for future research. Finally, a new stable very-high-order finite-difference method is implemented for the spatial discretization of the operators describing the spatial biglobal eigenvalue problem, parabolized stability equation three-dimensional analysis, and the triglobal eigenvalue problem; it is shown that, combined with sparse matrix treatment, all these problems may now be solved on standard desktop computers

Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study.

The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways.

Analysis of pixel-mapping rounding on geometric distortion as a prediction for view synthesis distortion

We analyze the performance of the geometric distortion, incurred when coding depth maps in 3D Video, as an estimator of the distortion of synthesized views. Our analysis is motivated by the need of reducing the computational complexity required for the computation of synthesis distortion in 3D video encoders. We propose several geometric distortion models that capture (i) the geometric distortion caused by the depth coding error, and (ii) the pixel-mapping precision in view synthesis. Our analysis starts with the evaluation of the correlation of geometric distortion values obtained with these models and the actual distortion on synthesized views. Then, the different geometric distortion models are employed in the rate-distortion optimization cycle of depth map coding, in order to assess the results obtained by the correlation analysis. Results show that one of the geometric distortion models is performing consistently better than the other models in all tests. Therefore, it can be used as a reasonable estimator of the synthesis distortion in low complexity depth encoders.

Considering cycling for commuting : the role of mode familiarity : an exploration on the (circular) relation between cycling behaviours and attitudes toward cycling in Vitoria-Gasteiz, Spain

¿La gente utiliza la bicicleta porque les gusta? ¿O es el propio hecho de usarla la razón por la que les gusta hacerlo? ¿O es una combinación de las dos? Este tipo de preguntas reflejan un problema que se puede llamar ‘el círculo de la consideración de la bicicleta’: para poder considerar el uso de la bicicleta en el conjunto de posibles opciones a escoger, un individuo tiene que tener creencias positivas sobre ella, sobre todo en el caso de ‘contextos de bajo uso’. Pero parece poco probable que se formen creencias positivas cuando hay bajos niveles de familiaridad al modo, es decir, con un bajo conocimiento de sus características, su funcionamiento y del imaginario asociado; al mismo tiempo, la familiaridad irá alcanzando niveles más altos conforme aumente el tiempo y la intensidad con la que se utilice la bicicleta a lo largo de la vida de los individuos. El problema parece un circulo recursivo huevo-gallina, ya que es difícil que alguien considere el usar la bicicleta en lugares donde su uso es una práctica poco extendida. En estos lugares, y dentro del conglomerado actual de tecnologías, infraestructuras, reglas, prácticas de los usuarios y preferencias culturales que se han desarrollado alrededor del automóvil (el actual "sistema socio-técnico de la movilidad urbana", Urry 2004; Geels 2005, 2012) usar la bicicleta es considerado por la mayoría como algo difícil, inseguro, y anormal. Como consecuencia, los procesos de aumento de familiaridad con la bicicleta permanecen inactivos. La tesis asume la familiaridad como una fuente de información e influencia sobre las creencias positivas sobre la bicicleta. En ‘contextos de bajo uso’, sin familiaridad al uso de la bicicleta, estas creencias sólo pueden surgir de ciertos rasgos personales (afecto, valores, identidades, voluntad, etc.). Tal como han evidenciado investigaciones recientes, en estos contextos la posibilidad de considerar el uso de la bicicleta (y su eventual adopción), se circunscribe principalmente a los ‘entusiastas’, a los que están dispuestos a “ir contra corriente” (Horton & Parkin 2012), limitando el alcance de las políticas de promoción. La investigación llevada a cabo en esta tesis ofrece un nuevo enfoque al problema del ‘círculo de la consideración de la bicicleta’. Para ello, plantea un modelo en el que se introduce a la familiaridad como un constructo que media entre el comportamiento final –qué modo de transporte elige el individuo– y el conjunto de constructos psicosociales que preceden la elección modal (creencias y actitudes). La familiaridad al uso de la bicicleta se concibe como una medida de la intensidad relativa del uso de una bicicleta, real y percibida (basándose en Diana & Mokhtarian 2009) que puede formarse de manera distinta según sus fines (utilitarios o no utilitarios). El constructo familiaridad con el modo bicicleta está relacionado con la cantidad de tiempo, la intensidad y la regularidad con la que un individuo ha hecho uso de la bicicleta a lo largo de su vida. La familiaridad se concibe así como una condición que permite definir adecuadamente el contexto en el que se toman las decisiones modales de los individuos, en línea con investigaciones que postulan patrones de causalidad alternativos entre los procesos cognitivos de elección y los comportamientos modales (Tardif 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). De este modo se plantea que el esquema unidireccional actitudesconductas podría no ser completamente valido en el caso de la consideración de la bicicleta, explorando la hipótesis que sean las propias conductas a influenciar la formación de las actitudes. En esta tesis, el constructo de familiaridad se articula teórica y metodológicamente, y se emplea un instrumento de diseño transversal para contrastarlo. Los resultados de una encuesta telefónica a una muestra representativa de 736 personas en la ciudad española de Vitoria-Gasteiz proveen evidencias que sugieren –aunque de forma preliminar– que la familiaridad juega un papel de mediadora en la relación entre la utilización de la bicicleta y la formación de las creencias y actitudes hacia el su uso. La tesis emplea mediciones para cada individuo con respecto tanto a su consideración como a su familiaridad al uso de la bicicleta. Éstas mediciones se definen haciendo uso del análisis factorial exploratorio (AFE). Por un lado, el AFE arroja una estructura del constructo ‘consideración’ formada por cuatro factores, tres de ellos asociados con elementos positivos y uno con elementos negativos: (1) de cómo el uso de la bicicleta se considera verde e inteligente (G&S); (2) sobre su carácter agradable y adecuado (P&S); (3) sobre su eficacia como modo de transporte para ir al trabajo (E); y (4) sobre los principales inconvenientes de su uso, es decir, las dificultades implícitas (sudoración y estar expuestos a las inclemencias del tiempo) y la sensación de inseguridad que genera (sentirse en riesgo de accidentes y estresarse por el tráfico) (D&T). Por otro lado, la familiaridad al uso de la bicicleta se mide en dos distintas variables ordinales (según se base en el uso utilitario o no utilitario). Como resultado, se puede hablar de que cada individuo se encuentra en una de las siguientes cuatro etapas en orden creciente hacia una familiaridad completa al modo: no familiarizados; apenas familiarizados; moderadamente familiarizados; totalmente familiarizados. El análisis de los datos de los cuatro grupos de sujetos de la muestra, –definidos de acuerdo con cada una de las cuatro etapas de familiaridad definidas– ha evidenciado la existencia de diferencias intergrupo estadísticamente significativas, especialmente para la medida relacionada con el uso utilitario. Asimismo, las personas en los niveles inferiores de familiaridad tienen una consideración menor de los aspectos positivos de la bicicleta y por el contrario presentan preocupaciones mayores hacia las características negativas respecto a aquellas personas que están más familiarizados en el uso utilitario. El uso, aunque esporádico, de una bicicleta para fines utilitarios (ir de compras, hacer recados, etc.), a diferencia de no usarla en absoluto, aparece asociado a unas puntuaciones significativamente más altas en los tres factores positivos (G&S, E, P&S), mientras que parece estar asociado a puntuaciones significativamente más bajas en el factor relacionado con las características negativas (D&U). Aparecen resultados similares cuando se compara un uso moderado, con uno esporádico, sobre todo con respecto a la consideración de las características negativas. Los resultados de esta tesis están en línea con la literatura anterior que se ha basado en variables similares (por ejemplo, de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; y van Bekkum et al. 2011a, entre otros), pero en este estudio las diferencias se observan en un contexto de bajo uso y se derivan de un análisis de toda la población de personas que se desplazan a su lugar de trabajo o estudio, lo cual eleva la fiabilidad de los resultados. La posibilidad de que unos niveles más altos de uso de la bicicleta para fines utilitarios puedan llevar a niveles más positivos de su consideración abre el camino a implicaciones teóricas y de políticas que se discuten en la tesis. Con estos resultados se argumenta que el enfoque convencional basado en el cambio de actitudes puede no ser el único y prioritario para lograr cambios a la hora de fomentar el uso de la bicicleta. Los resultados apuntan al potencial de otros esquemas de causalidad, basados en patrones de influencia más descentrados y distribuidos, y que adopten una mirada más positiva hacia los hábitos de transporte, conceptualizándolos como “inteligencia encarnada y pre-reflexiva” (Schwanen et al. 2012). Tales esquemas conducen a un enfoque más práctico para la promoción del uso de la bicicleta, con estrategias que podrían basarse en acciones de ‘degustación’ de su uso o de mayor ‘exposición’ a su uso. Is the fact that people like cycling the reason for them to cycle? Or is the fact that they do cycle the reason for them to like cycling? Or is a combination of the two? This kind of questions reflect a problem that can be called ‘the cycle of cycling consideration’: in order to consider cycling in the set of possible options to be chosen, an individual needs to have positive beliefs about it, especially in the case of ‘low-cycling contexts’. However, positive beliefs seem unlikely to be formed with low levels of mode familiarity, say, with a low acquaintance with mode features, functioning and images; at the same time, higher levels of familiarity are likely to be reached if cycling is practised over relative threshold levels of intensities and extensively across individual life courses. The problem looks like a chicken-egg recursive cycle, since the latter condition is hardly met in places where cycling is little practised. In fact, inside the current conglomerate of technologies, infrastructures, regulations, user practices, cultural preferences that have grown around the automobile (the current “socio-technical system of urban mobility”, Urry 2004; Geels 2005, 2012) cycling is commonly considered as difficult, unsafe, and abnormal. Consequently, the processes of familiarity forming remain disabled, and, as a result, beliefs cannot rely on mode familiarity as a source of information and influence. Without cycling familiarity, origins of positive beliefs are supposed to rely only on personal traits (affect, values, identities, willingness, etc.), which, in low-cycling contexts, confine the possibility of cycling consideration (and eventual adoption) mainly to ‘cycling enthusiasts’ who are willing to “go against the grain” (Horton & Parkin 2012), as it results from previous research. New research conducted by author provides theoretical insights for a different approach of the cycling consideration problem in which the presence of the new construct of cycling familiarity is hypothesised in the relationship between mode choice behaviour and the set of psychosocial constructs that are supposed to precede it (beliefs and attitudes). Cycling familiarity is conceived as a measure of the real and the perceived relative intensity of use of a bicycle (building upon Diana & Mokhtarian 2009) which may be differently formed for utilitarian or non-utilitarian purposes. The construct is assumed to be related to the amount of time, the intensity and the regularity an individual spends in using a bicycle for the two distinct categories of purposes, gaining in this way a certain level of acquaintance with the mode. Familiarity with a mode of transport is conceived as an enabling condition to properly define the decision-making context in which individual travel mode choices are taken, in line with rather disperse research efforts postulating inverse relationships between mode behaviours and mode choices (Tardiff 1977; Dobson et al. 1978; Golob et al. 1979; Golob 2001; Schwanen et al. 2012; Diana et al. 2009; Vij & Walker 2014). The new construct is built theoretically and methodologically, and a cross-sectional design instrument is employed. Results from a telephone survey in a representative sample of 736 commuters in the Spanish city of Vitoria-Gasteiz, provide suggestive –although preliminary– evidence on the role of mode familiarity as a mediator in the relationship between cycling use and the formation of beliefs and attitudes toward cycling. Measures of both cycling consideration and cycling familiarity are defined making use of exploratory factor analysis. On the one hand, four distinct cycling consideration measures are created, based on attitude expressions on four underlying factors relating to the cycling commuting behaviour: on how cycling commuting is considered green and smart (G&S); on its pleasant and suited character (P&S); on its efficiency as a mode of transport for commuting (E); and on the main drawbacks of its use, namely the difficulties implied (sweating and being exposed to adverse weather conditions) and the sense of unsafety it generates (feeling at risk of accidents and getting stressed by traffic) (D&U). On the other hand, dimensions of cycling familiarity are measured on two distinct ordinal variables (whether based on the utilitarian or non-utilitarian use) comprising four stages to a complete mode familiarity: not familiar; barely familiar; moderately familiar; fully familiar. For each of the four stages of cycling familiarity defined, statistical significant differences are found, especially for the measure related to the utilitarian use. Consistently, people at the lower levels of cycling familiarity have a lower consideration of the positive aspects of cycling and conversely they exhibit higher concerns towards the negative characteristics than those individuals that are more familiar in utilitarian cycling. Using a bicycle occasionally for practical purposes, as opposed to not using it at all, seems associated to significant higher scores in the three positive factors (G&S, E, P&S) while it appears to be associated to significant lower scores in the factor relating with the negative characteristics of cycling commuting (D&U). A same pattern also occurs with a moderate use, as opposed to an occasional one, especially for the consideration of the negative characteristics. The results are in line with previous literature based on similar variables (e.g. de Geus et al. 2008; Stinson & Bhat 2003, 2004; Hunt & Abraham 2006; and van Bekkum et al. 2011a, among others), but in this study the differences are observed in a low-cycling context and derive from an analysis of the entire population of commuters, which rises the reliability of results.

Are team personality and climate related to satisfaction and software quality? Aggregating results from a twice replicated experiment

Research into software engineering teams focuses on human and social team factors. Social psychology deals with the study of team formation and has found that personality factors and group processes such as team climate are related to team effectiveness. However, there are only a handful of empirical studies dealing with personality and team climate and their relationship to software development team effectiveness. Objective We present aggregate results of a twice replicated quasi-experiment that evaluates the relationships between personality, team climate, product quality and satisfaction in software development teams. Method Our experimental study measures the personalities of team members based on the Big Five personality traits (openness, conscientiousness, extraversion, agreeableness, neuroticism) and team climate factors (participative safety, support for innovation, team vision and task orientation) preferences and perceptions. We aggregate the results of the three studies through a meta-analysis of correlations. The study was conducted with students. Results The aggregation of results from the baseline experiment and two replications corroborates the following findings. There is a positive relationship between all four climate factors and satisfaction in software development teams. Teams whose members score highest for the agreeableness personality factor have the highest satisfaction levels. The results unveil a significant positive correlation between the extraversion personality factor and software product quality. High participative safety and task orientation climate perceptions are significantly related to quality. Conclusions First, more efficient software development teams can be formed heeding personality factors like agreeableness and extraversion. Second, the team climate generated in software development teams should be monitored for team member satisfaction. Finally, aspects like people feeling safe giving their opinions or encouraging team members to work hard at their job can have an impact on software quality. Software project managers can take advantage of these factors to promote developer satisfaction and improve the resulting product.

UMA ANÁLISE DA RELAÇÃO ENTRE VARIÁVEIS MACROECONÔMICAS E O COMPORTAMENTO DAS AÇÕES DE MAIOR LIQUIDEZ DO ÍNDICE IBOVESPA

As ações de maior liquidez do índice IBOVESPA, refletem o comportamento das ações de um modo geral, bem como a relação das variáveis macroeconômicas em seu comportamento e estão entre as mais negociadas no mercado de capitais brasileiro. Desta forma, pode-se entender que há reflexos de fatores que impactam as empresas de maior liquidez que definem o comportamento das variáveis macroeconômicas e que o inverso também é uma verdade, oscilações nos fatores macroeconômicos também afetam as ações de maior liquidez, como IPCA, PIB, SELIC e Taxa de Câmbio. O estudo propõe uma análise da relação existente entre variáveis macroeconômicas e o comportamento das ações de maior liquidez do índice IBOVESPA, corroborando com estudos que buscam entender a influência de fatores macroeconômicos sobre o preço de ações e contribuindo empiricamente com a formação de portfólios de investimento. O trabalho abrangeu o período de 2008 a 2014. Os resultados concluíram que a formação de carteiras, visando a proteção do capital investido, deve conter ativos com correlação negativa em relação às variáveis estudadas, o que torna possível a composição de uma carteira com risco reduzido.

Two-dimensional IR correlation spectroscopy: Sequential events in the unfolding process of the λ Cro-V55C repressor protein

A question often posed in protein folding/unfolding studies is whether the process is fully cooperative or whether it contains sequential elements. To address this question, one needs tools capable of resolving different events. It seems that, at least in certain cases, two-dimensional (2D) IR correlation spectroscopy can provide answers to this question. To illustrate this point, we have turned to the Cro-V55C dimer of the λ Cro repressor, a protein known to undergo thermal unfolding in two discrete steps through a stable equilibrium intermediate. The secondary structure of this intermediate is compatible with that of a partially unfolded protein and involves a reorganization of the N terminus, whereas the antiparallel β-ribbon formed by the C-terminal part of each subunit remains largely intact. To establish whether the unfolding process involves sequential events, we have performed a 2D correlation analysis of IR spectra recorded over the temperature range of 20–95°C. The 2D IR correlation analysis indeed provides evidence for a sequential formation of the stable intermediate, which is created in three (closely related) steps. A first step entails the unfolding of the short N-terminal β-strand, followed by the unfolding of the α-helices in a second step, and the third step comprises the reorganization of the remaining β-sheet and of some unordered segments in the protein. The complete unfolding of the stable intermediate at higher temperatures also undergoes sequential events that ultimately end with the breaking of the H bonds between the two β-strands at the dimer interface.

Crystal structure of D-amino acid oxidase: a case of active site mirror-image convergent evolution with flavocytochrome b2.

D-amino acid oxidase is the prototype of the FAD-dependent oxidases. It catalyses the oxidation of D-amino acids to the corresponding alpha-ketoacids. The reducing equivalents are transferred to molecular oxygen with production of hydrogen peroxide. We have solved the crystal structure of the complex of D-amino acid oxidase with benzoate, a competitive inhibitor of the substrate, by single isomorphous replacement and eightfold averaging. Each monomer is formed by two domains with an overall topology similar to that of p-hydroxybenzoate hydroxylase. The benzoate molecule lays parallel to the flavin ring and is held in position by a salt bridge with Arg-283. Analysis of the active site shows that no side chains are properly positioned to act as the postulated base required for the catalytic carboanion mechanism. On the contrary, the benzoate binding mode suggests a direct transfer of the substrate alpha-hydrogen to the flavin during the enzyme reductive half-reaction.The active site Of D-amino acid oxidase exhibits a striking similarity with that of flavocytochrome b2, a structurally unrelated FMN-dependent flavoenzyme. The active site groups (if these two enzymes are in fact superimposable once the mirror-image of the flavocytochrome b2 active site is generated with respect to the flavin plane. Therefore, the catalytic sites of D-amino acid oxidase and flavocytochrome b2 appear to have converged to a highly similar but enantiomeric architecture in order to catalvze similar reactions (oxidation of alpha-amino acids or alpha-hydroxy acids), although with opposite stereochemistry.

Geoquímica multielementar de sedimentos de corrente no Estado de São Paulo: abordagem através da análise estatística multivariada

Este trabalho apresenta resultados geoquímicos multielementares de sedimentos de corrente no estado de São Paulo, obtidos através do projeto institucional do Serviço Geológico do Brasil denominado \"Levantamento Geoquímico de Baixa Densidade no Brasil\". Dados analíticos de 1422 amostras de sedimento de corrente obtidos por ICP-MS (Inductively Coupled Plasma Mass Spectrometry), para 32 elementos químicos (Al, Ba, Be, Ca, Ce, Co, Cr, Cs, Cu, Fe, Ga, Hf, K, La, Mg, Mn, Mo, Nb, Ni, P, Pb, Rb, Sc, Sn, Sr, Th, Ti, U, V, Y, Zn e Zr), foram processadas e abordadas através da análise estatística uni e multivariada. Os resultados do tratamento dos dados através de técnicas estatísticas univariadas forneceram os valores de background geoquímico (teor de fundo) dos 32 elementos para todo estado de São Paulo. A análise georreferenciada das distribuições geoquímicas unielementares evidenciaram a compartimentação geológica da área. As duas principais províncias geológicas do estado de São Paulo, Bacia do Paraná e Complexo Cristalino, se destacam claramente na maioria das distribuições geoquímicas. Unidades geológicas de maior expressão, como a Formação Serra Geral e o Grupo Bauru também foram claramente destacadas. Outras feições geoquímicas indicaram possíveis áreas contaminadas e unidades geológicas não cartografadas. Os resultados da aplicação de métodos estatísticos multivariados aos dados geoquímicos com 24 variáveis (Al, Ba, Ce, Co, Cr, Cs, Cu, Fe, Ga, La, Mn, Nb, Ni, Pb, Rb, Sc, Sr, Th, Ti, U, V, Y, Zn e Zr) permitiram definir as principais assinaturas e associações geoquímicas existentes em todo estado de São Paulo e correlacioná-las aos principais domínios litológicos. A análise de agrupamentos em modo Q forneceu oito grupos de amostras geoquimicamente correlacionáveis, que georreferenciadas reproduziram os principais compartimentos geológicos do estado: Complexo Cristalino, Grupos Itararé e Passa Dois, Formação Serra Geral e Grupos Bauru e Caiuá. A análise discriminante multigrupos comprovou, estatisticamente, a classificação dos grupos formados pela análise de agrupamentos e forneceu as principais variáveis discriminantes: Fe, Co, Sc, V e Cu. A análise de componentes principais, abordada em conjunto com a análise fatorial pelo método de rotação varimax, forneceram os principais fatores multivariados e suas respectivas associações elementares. O georreferenciamento dos valores de escores fatoriais multivariados delimitaram as áreas onde as associações elementares ocorrem e forneceram mapas multivariados para todo o estado. Por fim, conclui-se que os métodos estatísticos aplicados são indispensáveis no tratamento, apresentação e interpretação de dados geoquímicos. Ademais, com base em uma visão integrada dos resultados obtidos, este trabalho recomenda: (1) a execução dos levantamentos geoquímicos de baixa densidade em todo país em caráter de prioridade, pois são altamente eficazes na definição de backgrounds regionais e delimitação de províncias geoquímicas com interesse metalogenético e ambiental; (2) a execução do mapeamento geológico contínuo em escala adequada (maiores que 1:100.000) em áreas que apontam para possíveis existências de unidades não cartografadas nos mapas geológicos atuais.

The dramatick works of William Shakespeare : printed complete, with Dr. Samuel Johnson's preface and notes ; to which is prefixed the life of the author.

Title page engraved with vignette of the author.