Effect of two green algae species (Chlorella sp. & Scenedesmus obliquus) enriched with B group vitamins on food chain of Rutilus frisii kutum (Kamensky, 1901) fry

The Effect of two freshwater green algae species Chlorella sp. & Scenedesmus obliquus enriched (from the beginning of culture and after 96 hours) with different dosages of B group vitamins (0, 0.5, 1, and 2 ml of enriching solution per each liter of algae medium) on fecundity of Daphnia magna and growth of Rutilus frisii kutum fry were investigated in a research from spring, 2008 to autumn, 2009. First, each of the green algae species were cultured purely and massively in the Zander (Z-8+N) medium and then the nutritional value (the amount of protein, lipid, and carbohydrate) of enriched algae were meausered. In this study, enriching of Chlorella sp. & S. obliquus with a suitable mix of B group vitamins significantly improved their nutritive value. So the highest amount of nutritional value of Chlorella sp. was obtained because of enriching with dosage 0.5 ml.l-1 (366.654Kcal) and for Scenedesmus obliquus with dosage of 1 ml.l-1 (376.95Kcal). The acquired amount from control group showed an increase of respectively 42% and 11%. According to the results, increased dosages of enriching solution caused Daphnia fecundity to increase (at both stages : enrichment from the beginning of culture and after 96 hours). So the highest average of D. magna reproduction rate was obtained through being fed with Chlorella sp. and S. obliquus enriched with dosage of 2 ml enriching solution per liter of algae medium. The average fecundity of D. magna fed with Chlorella sp. enriched with dosage of 2 ml.l-1 enriching solution from the beginning of culture and after 96 hours was obtained respectively 2.128 ± 0.375 and 2.1 ± 0.69 and the average fecundity of D. magna fed with S. obliquus enriched with dosage of 2 ml enriching solution from the beginning of culture and after 96 hours was obtained respectively 2.128 ± 0.375 and 2.1 ± 0.69 which showed respectively an increase of 61 ٪, 91٪, 77 ٪, and 83٪ in proportion to the acquired amount from control group. When enriching solution was added to either algae culture medium from the beginning of culture, showed statistically significant differences (P<0.05) between dosages of 0 and 2 ml.l-1, 1 and 2 ml.l-1, and 0.5 and 2 ml enriching solution per each liter of Chlorella sp. culture medium and between dosages of 0 and 1 ml.l-1, and 0 and 2 ml enriching solution per each liter of S. obliquus culture medium. The highest average of body weight gain percentage and specific growth rate of kutum fry was obtained respectively 21.19%, 26.63%, 1.92, and 2.34 from the beginning of culture and after 96 hours with dosage of 1 ml B group vitamins per each liter of Chlorella sp. culture medium, which showed respectively an increase of 50%, 70%, 46%, and 62% in proportion to the acquired amount from control group. In the cases which Chlorella sp. were grown in the medium containing vitamin, from point of view of the average percentage of weight and specific growth rate of kutum fry significant differences were observed on the basis of the result of One-way ANOVA between dosages of 0 and 1, 1 and 2 , 0.5 and 1 ml B group vitamins per each liter. The highest average of body weight gain percentage and specific growth rate of kutum fry was obtained respectively 32.02%, 29.42%, 2.78, and 2.34 from the beginning of culture and after 96 hours with dosage of 2 ml B group vitamins per each liter of S. obliquus culture medium, which showed respectively an increase of 32%, 19%, 28%, and 17% in proportion to the acquired amount from control group. In the cases which S. obliquus were grown in the medium containing vitamin, from point of view of the average percentage of weight and specific growth rate of kutum fry significant differences were observed on the basis of the result of One-way ANOVA between dosages of 0 and 1, 0 and 2. According to the results of the present research we can say that considerable enhancement in the quality of the food of D. magna can be made by manipulation of the nutritional value of fresh water unicellular green algae with suitable mixture of B group vitamins, so that both the fecundity of D. magna will increase and the nutritional requirements of the kutum fry will be filled in this way.

Mercury bioaccumulation in pike (Esox lucius) food chain from Anzali Lagoon, Iran

A number of wide-ranging monitoring studies have been performed in order to estimate the degree of mercury (Hg) contamination in freshwater ecosystems. Knowledge regarding contamination of different levels of the food chain is necessary for estimation of total pollutant input fluxes and subsequent partitioning among different phases in the aquatic system. The growing international concern about this environmental data is closely related to the strongly developing ecological risk assessment activities. In addition,freshwater monitoring outputs hold a key position in the estimation of the Hg dose consumed by the human population as it is highly dependent on fish consumption. So monitoring of Hg in the tissue of edible fish is extremely important because of contaminated fish has caused serious neurological damage to new born babies and adults. Mercury tends to accumulate in fish tissue, particularly, in the form of methyl mercury, which is about 10 times more toxic than inorganic mercury. The Anzali lagoon is one of the biggest wetland of Guilan province, which joins to the Caspian sea. Many Chemical and industrial factories plus agricultural runoffs and urban and rural sewages are major polluting sources of the Anzali wetland. Since many of those polluting sources drain their wastes directly or indirectly into the Anzali wetland and their sewages may be polluted with Hg, this study was conducted to find out the bioaccumulation of Hg bioaccumulation in pike (Esox lucius) food chain from Anzali lagoon, Iran. Sampling were carried out from July 2004 to July 2005, in addition 318 speciments of 9 fish species were collected. T-Hg was measured by LECO AMA 254 Advanced Mercury Analyzer (USA) according to ASTM standard No D-6722. Each sample was analyzed 3 times. Accuracy of T-Hg analysis was checked by running three samples of Standard Reference Materials; SRM 1633b, SRM 2711 & Sra 2709. Detection limit was 0.001 mg/kg in dry weight. The Accuracy degree of analyzor equipment with RSD<%0.05 (N=7) was between %95.5 and %105. In overal eigth fish species were distingushed in the gut content of 87 speciments of pike with age 1-5 year and maximum length 550mm. The max. and min. concentration of T-Hg in dorsal muscle of pjke was 0.2ppm in one year and 1.2ppm in five year class. The mean of T-Hg significantly increased with age and length increased (P<0.05).Mercury accumulation pattern in pike was as well as muscle > liver > spleen (P<0.05). THg content in female was higher than male(P<0.05). In contrast the mean of THg concentration in dorsal muscle of eigth fish species as prey was 0.282, 0.261, 0.328, 0.254, 0.256, 0.286, 0.322 and 0.241 ppm for Carassius auratus gibelio, Hemiculter leucisculus, Blicca bjoerkna transcaucasica, Chalcalburnus mossulensis, Rhodeus sericeus amarus, Gambusia holbrooki, Alburnus charusini hohenackeri & Scardinius Erythrophthalmus respectively.Liner regresion indicated that high degree of relationship between age of pike and Uptak/Intake ratio (R2=%99.12) and indicated that the mercury bioaccumulation in the pike dorsal muscle increased with age increased. BFA was >1 and and indicating the mercury biomagnification in the pike food chain. Trophy level of pike in the Anzali lagoon was estimated as well as 3.5 and 4 . It is generally agreed that Hg concentration in carnivorous fish are higher than in noncarnivorous species.

Exploring geographical dispersion in Thailand-based food supply chain (FSC)

Purpose: The purpose of this paper is to explore the key influential factors and their implications on food supply chain (FSC) location decisions from a Thailand-based manufacturer's view. Design/methodology/approach: In total, 21 case studies were conducted with eight Thailand-based food manufacturers. In each case, key influential factors were observed along with their implications on upstream and downstream FSC location decisions. Data were collected through semi-structured interviews and documentations. Data reduction and data display in tables were used to help data analysis of the case studies. Findings: This exploratory research found that, in the food industry, FSC geographical dispersion pattern could be determined by four factors: perishability, value density, economic-political forces, and technological forces. Technological forces were found as an enabler for FSC geographical dispersion whereas the other three factors could be both barriers and enablers. The implications of these four influential factors drive FSC towards four key patterns of FSC geographical dispersion: local supply chain (SC), supply-proximity SC, market-proximity SC, and international SC. Additionally, the strategy of the firm was found to also be an influential factor in determining FSC geographical dispersion. Research limitations/implications: Despite conducting 21 cases, the findings in this research are based on a relatively small sample, given the large size of the industry. More case evidence from a broader range of food product market and supply items, particularly ones that have significantly different patterns of FSC geographical dispersions would have been insightful. The consideration of additional influential factors such as labour movement between developing countries, currency fluctuations and labour costs, would also enrich the framework as well as improve the quality and validity of the research findings. The different strategies employed by the case companies and their implications on FSC location decisions should also be further investigated along with cases outside Thailand, to provide a more comprehensive view of FSC geographical location decisions. Practical implications: This paper provides insights how FSC is geographically located in both supply-side and demand-side from a manufacturing firm's view. The findings can also provide SC managers and researchers a better understanding of their FSCs. Originality/value: This research bridges the existing gap in the literature, explaining the geographical dispersion of SC particularly in the food industry where the characteristics are very specific, by exploring the internationalization ability of Thailand-based FSC and generalizing the key influential factors - perishability (lead time), value density, economic-political forces, market opportunities, and technological advancements. Four key patterns of FSC internationalization emerged from the case studies. © Emerald Group Publishing Limited.

Market opportunity identification for minor crops for food security through value chain studies

The brochure is to contribute to the overall goal of stimulating the adaptation of pro-poor agri-food systems innovations to improve food security and sustainable natural resource management among rural poor farmers. The paper seeks to identify and exploit opportunities for expanding market access for minor crops and NRM products. The minor crops studied included cow pea, sorghum, groundnut, sweet potato and yam.

The intelligent product driven supply chain

Establishing connectivity of products with real-time information about themselves can at one level provide accurate data, and at another, allow products to assess and influence their own destiny. In this way, the specification for an intelligent product is being built - one whose information content is permanently bound to its material content. This paper explores the impact of such development on supply chains, contrasting between simple and complex product supply chains. The Auto-ID project is on track to enable such connectivity between products and information using a single, open-standard, data repository for storage and retrieval of product information. The potential impact on the design and management of supply chains is immense. This paper provides an introduction to of some of these changes, demonstrating that by enabling intelligent products, Auto ID systems will be instrumental in driving future supply chains. The paper also identifies specific application areas for this technology in the product supply chain.

Managing global network operations along the engineering value chain

Purpose: This paper aims to improve understanding of how to manage global network operations from an engineering perspective. Design/methodology/approach: This research adopted a theory building approach based on case studies. Grounded in the existing literature, the theoretical framework was refined and enriched through nine in-depth case studies in the industry sectors of aerospace, automotives, defence and electrics and electronics. Findings: This paper demonstrates the main value creation mechanisms of global network operations along the engineering value chain. Typical organisational features to support the value creation mechanisms are captured, and the key issues in engineering network design and operations are presented with an overall framework. Practical implications: Evidenced by a series of pilot applications, outputs of this research can help companies to improve the performance of their current engineering networks and design new engineering networks to better support their global businesses and customers in a systematic way. Originality/value: Issues about the design and operations of global engineering networks (GEN) are poorly understood in the existing literature in contrast to their apparent importance in value creation and realisation. To address this knowledge gap, this paper introduces the concept of engineering value chain to highlight the potential of a value chain approach to the exploration of engineering activities in a complex business context. At the same time, it develops an overall framework for managing GEN along the engineering value chain. This improves our understanding of engineering in industrial value chains and extends the theoretical understanding of GEN through integrating the engineering network theories and the value chain concepts. © Emerald Group Publishing Limited.

Intelligent products in the supply chain - 10 years on

Ten years ago the intelligent product model was introduced as a means of motivating a supply chain in which product or orders were central as opposed to the organizations that stored or delivered them. This notion of a physical product influencing its own movement through the supply chain was enabled by the evolution of low cost RFID systems which promised low cost connection between physical goods and networked information environments. In 2002 the notion of product intelligence was regarded as a useful but rather esoteric construct. However, in the intervening ten years there have been a number of technological advances coupled with an increasingly challenged business environment which make the prospects for intelligent product deployment seem more likely. This paper reviews a number of these developments and assesses their impact on the intelligent product approach. © 2012 IFAC.