EEC energy policy and the UK:the Birmingham energy model

This paper examines the implications of the EEC common energy policy for the UK energy sector as represented by a long-term programming model. The model suggests that the UK will be a substantial net exporter of energy in 1985 and will therefore make an important contribution towards the EEC's efforts to meet its import dependency target of 50% or less of gross inland consumption. Furthermore, the UK energy sector could operate within the 1985 EEC energy policy constraints with relatively low extra cost up to the year 2020 (the end of the period covered by the model). The main effect of the constraints would be to bring forward the production of synthetic gas and oil from coal.

Optical link design for minimum power consumption and maximum capacity

Using a well-established analytic nonlinear signal-to-noise ratio noise model we show that there are very simple, fibre independent, amplifier gains which minimize the total energy requirement for amplified systems. Power savings of over 50% are shown to be possible by choosing appropriate amplifier gain and output power.

A classification model for product-service offerings

Organisations have been approaching servitisation in an unstructured fashion. This is partially because there is insufficient understanding of the different types of Product-Service offerings. Therefore, a more detailed understanding of Product-Service types might advance the collective knowledge and assist organisations that are considering a servitisation strategy. Current models discuss specific aspects on the basis of few (or sometimes single) dimensions. In this paper, we develop a comprehensive model for classifying traditional and green Product-Service offerings, thus combining business and green offerings in a single model. We describe the model building process and its practical application in a case study. The model reveals the various traditional and green options available to companies and identifies how to compete between services; it allows servitisation positions to be identified such that a company may track its journey over time. Finally it fosters the introduction of innovative Product-Service Systems as promising business models to address environmental and social challenges. © 2013 Elsevier Ltd. All rights reserved.

Concentration polarization model of spiral-wound membrane modules with application to batch-mode RO desalination of brackish water

Batch-mode reverse osmosis (batch-RO) operation is considered a promising desalination method due to its low energy requirement compared to other RO system arrangements. To improve and predict batch-RO performance, studies on concentration polarization (CP) are carried out. The Kimura-Sourirajan mass-transfer model is applied and validated by experimentation with two different spiral-wound RO elements. Explicit analytical Sherwood correlations are derived based on experimental results. For batch-RO operation, a new genetic algorithm method is developed to estimate the Sherwood correlation parameters, taking into account the effects of variation in operating parameters. Analytical procedures are presented, then the mass transfer coefficient models are developed for different operation processes, i.e., batch-RO and continuous RO. The CP related energy loss in batch-RO operation is quantified based on the resulting relationship between feed flow rates and mass transfer coefficients. It is found that CP increases energy consumption in batch-RO by about 25% compared to the ideal case in which CP is absent. For continuous RO process, the derived Sherwood correlation predicted CP accurately. In addition, we determined the optimum feed flow rate of our batch-RO system.

Keyboard warriors in cyberfights:conflict in online communities of consumption

Nowadays, with the use of social media generalizing, increasingly more people gather online to share their passion for specific consumption activities. Despite this shared passion, conflicts frequently erupt in online communities of consumption (OCC). A systematic review of the literature revealed that a lot of knowledge has developed on OCC conflict. Different types of conflicts unfolding in an OCC context have been distinguished, various drivers of conflict identified and various consequences outlined at the individual level (experiential value) and the community level (collective engagement and community culture). However the specificity of conflicts unfolding in an OCC context has not been conceptualized. Past research is also inconclusive as to where and when does OCC conflict create or destroy value in communities. This research provides a theory of OCC conflict and its impact on value formation by conceptualizing OCC conflict as performances. The theory was developed by conducting a netnography of a clubbing forum. Close to 20,000 forum posts and 250 pages of interview transcript and field notes were collected over 27 months and analysed following the principles of grounded theory. Four different types of conflict performances are distinguished (personal, played, reality show and trolling conflict) based on the clarity of the performance. Each type of conflict performance is positioned with regard to its roots and consequences for value formation. This research develops knowledge on disharmonious interactions in OCCs contributing to the development of a less utopian perspective of OCCs. It indicates how conflict is not only a byproduct of consumption but it is also a phenomenon consumed. It also introduces the concept of performance clarity to the literature on performance consumption. This research provides guidelines to community managers on how to manage conflict and raises ethical issues regarding the management of conflict on social media.

The calculation of dynamic ecological footprint on the basis of the dynamic input-output model

The Leontief input-output model is widely used to determine the ecological footprint of consumption in a region or a country. It is able to capture spillover environmental effects along the supply change, thus its popularity is increasing in ecology related economic research. These studies are static and the dynamic investigations are neglected. The dynamic Leontief model makes it possible to involve the capital and inventory investment in the footprint calculation that projects future growth of GDP and environmental impacts. We show a new calculation method to determine the effect of capital accumulation on ecological footprint. Keywords: Dynamic Leontief model, Dynamic ecological footprint, Environmental management, Allocation method

The resource conservation effect of recycling in a dynamic Leontief model

The aim of the paper is to investigate the impact of recycling on the use of non-renewable resources in the economy. The paper tries to generalize the classical dynamic input–output model. In this regard we extend the standard Leontief model with the balance equation of recycled products, and we establish some properties of this augmented model. We investigate how recycling extends the availability of non-renewable natural resources for the next generations in an inter-industry framework. Supposing a balanced growth both for production and consumption, we examine the existence of the balanced growth path of this model and compare the results to the classical Leontief model. We try to answer the question whether recycling/reuse increases the growth possibility of an economy. Finally, we illustrate our results with a simple numerical example. Thus, we analyze a possible sustainable development of the economy on the basis of the product recovery management of industries.

Az egyensúlyi ráták unicitása és a bérráta pozitivitása a Neumann-modell általánosításaiban (Uniqueness of equilibrium rates and the positive value of the wage rate in generalizations from the Neumann model)

Cikkünk arról a paradox jelenségről szól, hogy a fogyasztást explicit módon megjelenítő Neumann-modell egyensúlyi megoldásaiban a munkabért meghatározó létszükségleti termékek ára esetenként nulla lehet, és emiatt a reálbér egyensúlyi értéke is nulla lesz. Ez a jelenség mindig bekövetkezik az olyan dekomponálható gazdaságok esetén, amelyekben eltérő növekedési és profitrátájú, alternatív egyensúlyi megoldások léteznek. A jelenség sokkal áttekinthetőbb formában tárgyalható a modell Leontief-eljárásra épülő egyszerűbb változatában is, amit ki is használunk. Megmutatjuk, hogy a legnagyobbnál alacsonyabb szintű növekedési tényezőjű megoldások közgazdasági szempontból értelmetlenek, és így érdektelenek. Ezzel voltaképpen egyrészt azt mutatjuk meg, hogy Neumann kiváló intuíciója jól működött, amikor ragaszkodott modellje egyértelmű megoldásához, másrészt pedig azt is, hogy ehhez nincs szükség a gazdaság dekomponálhatóságának feltételezésére. A vizsgált téma szorosan kapcsolódik az általános profitráta meghatározásának - Sraffa által modern formába öntött - Ricardo-féle elemzéséhez, illetve a neoklasszikus növekedéselmélet nevezetes bér-profit, illetve felhalmozás-fogyasztás átváltási határgörbéihez, ami jelzi a téma elméleti és elmélettörténeti érdekességét is. / === / In the Marx-Neumann version of the Neumann model introduced by Morishima, the use of commodities is split between production and consumption, and wages are determined as the cost of necessary consumption. In such a version it may occur that the equilibrium prices of all goods necessary for consumption are zero, so that the equilibrium wage rate becomes zero too. In fact such a paradoxical case will always arise when the economy is decomposable and the equilibrium not unique in terms of growth and interest rate. It can be shown that a zero equilibrium wage rate will appear in all equilibrium solutions where growth and interest rate are less than maximal. This is another proof of Neumann's genius and intuition, for he arrived at the uniqueness of equilibrium via an assumption that implied that the economy was indecomposable, a condition relaxed later by Kemeny, Morgenstern and Thompson. This situation occurs also in similar models based on Leontief technology and such versions of the Marx-Neumann model make the roots of the problem more apparent. Analysis of them also yields an interesting corollary to Ricardo's corn rate of profit: the real cause of the awkwardness is bad specification of the model: luxury commodities are introduced without there being a final demand for them, and production of them becomes a waste of resources. Bad model specification shows up as a consumption coefficient incompatible with the given technology in the more general model with joint production and technological choice. For the paradoxical situation implies the level of consumption could be raised and/or the intensity of labour diminished without lowering the equilibrium rate of the growth and interest. This entails wasteful use of resources and indicates again that the equilibrium conditions are improperly specified. It is shown that the conditions for equilibrium can and should be redefined for the Marx-Neumann model without assuming an indecomposable economy, in a way that ensures the existence of an equilibrium unique in terms of the growth and interest rate coupled with a positive value for the wage rate, so confirming Neumann's intuition. The proposed solution relates closely to findings of Bromek in a paper correcting Morishima's generalization of wage/profit and consumption/investment frontiers.

A Dynamic Input-Output Model with Renewable Resources

The paper studies a generalisation of the dynamic Leontief input-output model. The standard dynamic Leontief model will be extended with the balance equation of renewable resources. The renewable stocks will increase regenerating and decrease exploiting primary natural resources. In this study the controllability of this extended model is examined by taking the consumption as the control parameter. Assuming balanced growth for both consumption and production, we investigate the exhaustion of renewable resources in dependence on the balanced growth rate and on the rate of natural regeneration. In doing so, classic results from control theory and on eigenvalue problems in linear algebra are applied.

A Dynamic Input-Output Model with Renewable Resources

The paper studies a generalisation of the dynamic Leontief input-output model. The standard dynamic Leontief model will be extended with the balance equation of renewable resources. The renewable stocks will increase regenerating and decrease exploiting primary natural resources. In this study the controllability of this extended model is examined by taking the consumption as the control parameter. Assuming balanced growth for both consumption and production, we investigate the exhaustion of renewable resources in dependence on the balanced growth rate and on the rate of natural regeneration. In doing so, classic results from control theory and on eigenvalue problems in linear algebra are applied.

Szimulációk és érzékenységvizsgálatok a magyar gazdaság egy középméretű makromodelljével = Simulations and sensitivity analyses with a medium-sized macro model of the Hungarian economy

A tanulmányban a Pénzügyminisztérium gazdaságpolitikai főosztálya és az MTA Közgazdaságtudományi Intézete által kifejlesztett középméretű negyedéves makrogazdasági modell segítségével elemezzük a magyar gazdaság legfontosabb mechanizmusait. A modellezés során követett alapelvek és a modell blokkjainak bemutatása után egy forgatókönyv-elemzés keretében vizsgáljuk a makrogazdasági és költségvetési folyamatokat befolyásoló főbb faktorok hatásait. A - tágan értelmezett - "bizonytalansági tényezőket" három csoportba soroljuk: megkülönböztetjük a külső környezet (például árfolyam) változását, a gazdasági szereplők viselkedésében rejlő bizonytalanságokat (például a bérigazodás sebességének vagy a fogyasztássimítás mértékének bizonytalanságát), valamint a gazdaságpolitikai lépéseket (például állami bérek emelését). Megmutatjuk, hogy e kockázatok makrokövetkezményei nem függetlenek egymástól, például egy árfolyamváltozás hatását befolyásolja a bérigazodás sebessége. ______ This paper analyses the most important mechanisms of the Hungarian economy using a medium-sized quarterly macroeconomic model developed jointly by the Economic Policy Department of the Ministry of Finance and the Institute of Economics of the Hungarian Academy of Sciences. After introducing the fundamental principles of modelling and the building blocks of the model investigated, within a scenario analysis, the authors present the effects of the main factors behind the macroeconomic and budgetary processes. The sources of uncertainty - defined in a broad sense - are categorized in three groups: change in the external environment (e.g. the exchange rate), uncertainties in the behav-iour of economic agents (e.g. in speed of wage adjustment or extent of consumption smoothing), and economic policy decisions (e.g. the increase in public sector wages). The macroeconomic consequences of these uncertainties are shown not to be independent of each other. For instance, the effects of an exchange rate shock are influenced by the speed of wage adjustment.

Psychosocial variables associated with the co-occurrence of risky sexual behavior with alcohol consumption among university students

This study examined the association of theoretically guided and empirically identified psychosocial variables on the co-occurrence of risky sexual behavior with alcohol consumption among university students. The study utilized event analysis to determine whether risky sex occurred during the same event in which alcohol was consumed. Relevant conceptualizations included alcohol disinhibition, self-efficacy, and social network theories. Predictor variables included negative condom attitudes, general risk taking, drinking motives, mistrust, social group membership, and gender. Factor analysis was employed to identify dimensions of drinking motives. Measured risky sex behaviors were (a) sex without a condom, (b) sex with people not known very well, (c) sex with injecting drug users (IDUs), (d) sex with people without knowing whether they had a STD, and (e) sex with using drugs. A purposive sample was used and included 222 male and female students recruited from a major urban university. Chi-square analysis was used to determine whether participants were more likely to engage in risky sex behavior in different alcohol use contexts. These contexts were only when drinking, only when not drinking, and when drinking or not. The chi-square findings did not support the hypothesis that university students who use alcohol with sex will engage in riskier sex. These results added to the literature by extending other similar findings to a university student sample. For each of the observed risky sex behaviors, discriminant analysis methodology was used to determine whether the predictor variables would differentiate the drinking contexts, or whether the behavior occurred. Results from discriminant analyses indicated that sex with people not known very well was the only behavior for which there were significant discriminant functions. Gender and enhancement drinking motives were important constructs in the classification model. Limitations of the study and implications for future research, social work practice and policy are discussed. ^

Essays on durable goods consumption and firm innovation

This dissertation comprises three individual chapters. Chapter Two examines how free riding across neighbors influenced the diffusion of color television sets in rural China. Chapter Three tests for asymmetric information between a firm’s management and other investors concerning its patent output. Chapter Four discusses how knowledge stocks influence a patenting firm’s later diversification. Chapter Two documents the existence of a type of network effects—free riding across neighbors—in the consumption of color television sets in rural China, which reduces the propensity of non-owners to purchase. I construct a model of the timing of the purchase of a durable good in the presence of free riding, and test its key implications using household survey data in rural China. Chapter Three tests for asymmetric information between a firm’s management and other investors about its patent output by examining insider trading patterns and stock price changes in R&D intensive firms. It demonstrates that management has considerable information about its patent output beyond what is known to investors. It also shows that the predictive power of insider trading patterns on patent output comes from purchases rather than sales. Chapter Four discusses two sequential channels through which knowledge stocks may influence a firm’s later diversification. One is that firms with more knowledge are more likely to enter a new industry. The other is that firms’ businesses have a better chance of surviving, conditional on being formed. By examining U.S. public patenting firms in manufacturing sectors for 1984-1996, I find that knowledge stocks predict the likelihood of new industry entry when controlling for firm size. However, this predictive power is weakened when diversification effects are included. On the other hand, a survival study of newly established segments shows that initial knowledge stocks have significant positive effects on segment survival, whereas diversification effects are insignificant.

A computer simulation model for single -lane roundabouts

During the past three decades, the use of roundabouts has increased throughout the world due to their greater benefits in comparison with intersections controlled by traditional means. Roundabouts are often chosen because they are widely associated with low accident rates, lower construction and operating costs, and reasonable capacities and delay. ^ In the planning and design of roundabouts, special attention should be given to the movement of pedestrians and bicycles. As a result, there are several guidelines for the design of pedestrian and bicycle treatments at roundabouts that increase the safety of both pedestrians and bicyclists at existing and proposed roundabout locations. Different design guidelines have differing criteria for handling pedestrians and bicyclists at roundabout locations. Although all of the investigated guidelines provide better safety (depending on the traffic conditions at a specific location), their effects on the performance of the roundabout have not been examined yet. ^ Existing roundabout analysis software packages provide estimates of capacity and performance characteristics. This includes characteristics such as delay, queue lengths, stop rates, effects of heavy vehicles, crash frequencies, and geometric delays, as well as fuel consumption, pollutant emissions and operating costs for roundabouts. None of these software packages, however, are capable of determining the effects of various pedestrian crossing locations, nor the effect of different bicycle treatments on the performance of roundabouts. ^ The objective of this research is to develop simulation models capable of determining the effect of various pedestrian and bicycle treatments at single-lane roundabouts. To achieve this, four models were developed. The first model simulates a single-lane roundabout without bicycle and pedestrian traffic. The second model simulates a single-lane roundabout with a pedestrian crossing and mixed flow bicyclists. The third model simulates a single-lane roundabout with a combined pedestrian and bicycle crossing, while the fourth model simulates a single-lane roundabout with a pedestrian crossing and a bicycle lane at the outer perimeter of the roundabout for the bicycles. Traffic data was collected at a modern roundabout in Boca Raton, Florida. ^ The results of this effort show that installing a pedestrian crossing on the roundabout approach will have a negative impact on the entry flow, while the downstream approach will benefit from the newly created gaps by pedestrians. Also, it was concluded that a bicycle lane configuration is more beneficial for all users of the roundabout instead of the mixed flow or combined crossing. Installing the pedestrian crossing at one-car length is more beneficial for pedestrians than two- and three-car lengths. Finally, it was concluded that the effect of the pedestrian crossing on the vehicle queues diminishes as the distance between the crossing and the roundabout increases. ^

Developing an enhanced model for combined heat and air infiltration energy simulation

The need for efficient, sustainable, and planned utilization of resources is ever more critical. In the U.S. alone, buildings consume 34.8 Quadrillion (1015) BTU of energy annually at a cost of $1.4 Trillion. Of this energy 58% is utilized for heating and air conditioning. ^ Several building energy analysis tools have been developed to assess energy demands and lifecycle energy costs in buildings. Such analyses are also essential for an efficient HVAC design that overcomes the pitfalls of an under/over-designed system. DOE-2 is among the most widely known full building energy analysis models. It also constitutes the simulation engine of other prominent software such as eQUEST, EnergyPro, PowerDOE. Therefore, it is essential that DOE-2 energy simulations be characterized by high accuracy. ^ Infiltration is an uncontrolled process through which outside air leaks into a building. Studies have estimated infiltration to account for up to 50% of a building's energy demand. This, considered alongside the annual cost of buildings energy consumption, reveals the costs of air infiltration. It also stresses the need that prominent building energy simulation engines accurately account for its impact. ^ In this research the relative accuracy of current air infiltration calculation methods is evaluated against an intricate Multiphysics Hygrothermal CFD building envelope analysis. The full-scale CFD analysis is based on a meticulous representation of cracking in building envelopes and on real-life conditions. The research found that even the most advanced current infiltration methods, including in DOE-2, are at up to 96.13% relative error versus CFD analysis. ^ An Enhanced Model for Combined Heat and Air Infiltration Simulation was developed. The model resulted in 91.6% improvement in relative accuracy over current models. It reduces error versus CFD analysis to less than 4.5% while requiring less than 1% of the time required for such a complex hygrothermal analysis. The algorithm used in our model was demonstrated to be easy to integrate into DOE-2 and other engines as a standalone method for evaluating infiltration heat loads. This will vastly increase the accuracy of such simulation engines while maintaining their speed and ease of use characteristics that make them very widely used in building design.^