Synthesis, Characterization, and Electrocatalytic Activity toward Methanol Oxidation of Carbon-Supported Pt(x)-(RuO(2)-M)(1-x) Composite Ternary Catalysts (M = CeO(2), MoO(3), or PbO(x))

Carbon-supported platinum is commonly used as an anode electrocatalyst in low-temperature fuel cells fueled with methanol. The cost of Pt and the limited world supply are significant barriers for the widespread use of this type of fuel cell. Moreover, Pt used as anode material is readily poisoned by carbon monoxide produced as a byproduct of the alcohol oxidation. Although improvements in the catalytic performance for methanol oxidation were attained using Pt-Ru alloys, the state-of-the-art Pt-Ru catalyst needs further improvement because of relatively low catalytic activity and the high cost of noble Pt and Ru. For these reasons, the development of highly efficient ternary platinum-based catalysts is an important challenge. Thus, various compositions of ternary Pt(x)-(RuO(2)-M)(1-x)/C composites (M = CeO(2), MoO(3), or PbO(x)) were developed and further investigated as catalysts for the methanol electro-oxidation reaction. The characterization carried out by X-ray diffraction, energy-dispersive X-ray analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry point out that the different metallic oxides were successfully deposited on the Pt/C, producing small and well-controlled nanoparticles in the range of 2.8-4.2 nm. Electrochemical experiments demonstrated that the Pt(0.50)(RuO(2)-CeO(2))(0.50)/C composite displays the higher catalytic activity toward the methanol oxidation reaction (lowest onset potential of 207 mV and current densities taken at 450 mV, which are 140 times higher than those at commercial Pt/C), followed by the Pt(0.75)(RuO(2)-MoO(3))(0.25)/C composite. In addition, both of these composites produced low quantities of formic acid and formaldehyde when compared to a commercially available Pt(0.75)-Ru(0.25)/C composite (from E-Tek, Inc.), suggesting that the oxidation of methanol occurs mainly by a pathway that produces CO(2) forming the intermediary CO(ads).

Synthesis, Structural Characterization, and Biological Evaluation of Oxorhenium(V) Complexes with a Novel Type of Thiosemicarbazones Derived from N-[N `,N `-Dialkylamino(thiocarbonyl)]benzimidoyl Chlorides

Reactions of N-[N`,N`-diethylamino(thiocarbonyl)]benzimidoyl chloride with 4,4-dialkylthiosemicarbazides give a novel class of thiosemicarbazides/thiosemicarbazones, H(2)L, which causes a remarkable reduction of cell growth in in vitro experiments. These strong antiproliferative effects are also observed for oxorhenium(V) complexes of the general composition [ReOCl(L)], which are formed by reactions of the potentially tridentate ligands with (NBu(4))[ReOCl(4)]. A systematic substitution of the alkyl groups in the thiosemicarbazone building blocks of the ligands do not significantly influence the biological activity of the metal complexes, while the replacement of the chloro ligand by a PPh(3) ligand (by the replacement of the oxo unit by a nitrido ligand) completely terminated the cytotoxicity of the metal complexes.

A novel nanostructured composite formed by interaction of copper octa(3-aminopropyl)octasilsesquioxane with azide ligands: Preparation, characterization and a voltammetric application

This study presents the preparation, characterization and application of copper octa(3-aminopropyl)octasilsesquioxane following its subsequent reaction with azide ions (ASCA). The precursor (AC) and the novel compound (ASCA) were characterized by Fourier transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR), scanning electronic microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric analyses and voltammetric technique. The cyclic voltammogram of the modified graphite paste electrode with ASCA (GPE-ASCA), showed one redox couple with formal potential (E(1/2)(ox)) = 0.30 V and an irreversible process at 1.1 V (vs. Ag/AgCl; NaCl 1.0 M; v = 20 mV s(-1)). The material is very sensitive to nitrite concentrations. The modified graphite paste electrode (GPE-ASCA) gives a linear range from 1.0 x 10(-4) to 4.0 x 10(-3) mol L(-1) for the determination of nitrite, with a detection limit of 2.1 x 10(-4) mol L(-1) and the amperometric sensitivity of 8.04 mA/mol L(-1). (C) 2010 Elsevier Ltd. All rights reserved.

Optical Characterization and Optimization of Display Components : Some Applications to Liquid-Crystal-Based and Electrochromics-Based Devices

This dissertation is focused on theoretical and experimental studies of optical properties of materials and multilayer structures composing liquid crystal displays (LCDs) and electrochromic (EC) devices. By applying spectroscopic ellipsometry, we have determined the optical constants of thin films of electrochromic tungsten oxide (WOx) and nickel oxide (NiOy), the films’ thickness and roughness. These films, which were obtained at spattering conditions possess high transmittance that is important for achieving good visibility and high contrast in an EC device. Another application of the general spectroscopic ellipsometry relates to the study of a photo-alignment layer of a mixture of azo-dyes SD-1 and SDA-2. We have found the optical constants of this mixture before and after illuminating it by polarized UV light. The results obtained confirm the diffusion model to explain the formation of the photo-induced order in azo-dye films. We have developed new techniques for fast characterization of twisted nematic LC cells in transmissive and reflective modes. Our techniques are based on the characteristics functions that we have introduced for determination of parameters of non-uniform birefringent media. These characteristic functions are found by simple procedures and can be utilised for simultaneous determination of retardation, its wavelength dispersion, and twist angle, as well as for solving associated optimization problems. Cholesteric LCD that possesses some unique properties, such as bistability and good selective scattering, however, has a disadvantage – relatively high driving voltage (tens of volts). The way we propose to reduce the driving voltage consists of applying a stack of thin (~1µm) LC layers. We have studied the ability of a layer of a surface stabilized ferroelectric liquid crystal coupled with several retardation plates for birefringent color generation. We have demonstrated that in order to accomplish good color characteristics and high brightness of the display, one or two retardation plates are sufficient.

Extinction, pollution, and the sustainable use of exhaustible and renewable resources

Single ownership of natural resources is conunon in many developing countries and socialist economies. The sole owner is usually the .state or society at large, and governments are responsible for either distributing exploitation rights or engaging in exploitation through their own corporations. • Under this circumstance, the notion of externality may not fully explain pollution problems existent in these nations. This paper studies the case where a single agent owns both exhaustible and renewable resources, and attempts to maximize its welfare. The resources are either perfect or imperfect substitutes. Initially, exhaustible resource extraction does not affect the renewable resource, and sustainable growth is attainable. A lactor of pollution flowing from the extraction of the nc.nrenewable resource into the growth of the renewable resource is introduced. The continuous exploitation of the exhaustible resource leads to the " optimal " extinction of the renewable resource, and sustainable growth is no longer reached. Regulation from a supra governmental agency such as an multinational institution may prove to be of utmost importance, if sustainability is to be achieved. The paper is divided into five sections. Section two provides a brief survey of the relevant literature. Section three presents the model without pollution. This factor is introduced in section four. The final section discusses some possible approaches for attaining sustainable growth, and contains the concluding remarks .

Poly(epsilon-caprolactone)nanocapsules as carrier systems for herbicides: Physico-chemical characterization and genotoxicity evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Host-guest system of 4-nerolidylcatechol in 2-hydroxypropyl-beta-cyclodextrin: preparation, characterization and molecular modeling

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Encapsulation of Local Anesthetic Bupivacaine in Biodegradable Poly(DL-lactide-co-glycolide) Nanospheres: Factorial Design, Characterization and Cytotoxicity Studies

Local anesthetic agents cause temporary blockade of nerve impulses productiong insensitivity to painful stimuli in the area supplied by that nerve. Bupivacaine (BVC) is an amide-type local anesthetic widely used in surgery and obstetrics for sustained peripheral and central nerve blockade. in this study, we prepared and characterized nanosphere formulations containing BVC. To achieve these goals, BVC loaded poly(DL-lactide-co-glycolide) (PLGA) nanospheres (NS) were prepared by nanopreciptation and characterized with regard to size distribution, drug loading and cytotoxicity assays. The 2(3-1) factorial experimental design was used to study the influence of three different independent variables on nanoparticle drug loading. BVC was assayed by HPLC, the particle size and zeta potential were determined by dynamic light scattering. BVC was determined using a combined ultrafiltration-centrifugation technique. The results of optimized formulations showed a narrow size distribution with a polydispersivity of 0.05%, an average diameter of 236.7 +/- 2.6 nm and the zeta potential -2.93 +/- 1,10 mV. In toxicity studies with fibroblast 3T3 cells, BVC loaded-PLGA-NS increased cell viability, in comparison with the effect produced by free BVC. In this way, BVC-loaded PLGA-NS decreased BVC toxicity. The development of BVC formulations in carriers such as nanospheres could offer the possibility of controlling drug delivery in biological systems, prolonging the anesthetic effect and reducing toxicity.

Paraquat-loaded alginate/chitosan nanoparticles: Preparation, characterization and soil sorption studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and evaluation of the impact of feed management on the effluents of Nile tilapia (Oreochromis niloticus) culture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and selection of Bacillus thuringiensis isolates effective against Sitophilus oryzae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and polymorphism screening of IGF-I and prolactin genes in Nelore heifers

Insulin growth factor I (IGF-I) and prolactin (PRL) are peptide hormones that exert complementary effects on reproductive traits by acting on folliculogenesis. In view of the lack of information about the IGF-I and PRL genes in Bos indicus, the objective of this study was to partially characterize the promoter regions of these genes and to screen animals of different ages at first pregnancy for the presence of polymorphisms in these regions. In addition, we determined whether polymorphisms influence the regulation of the two hormone genes, evaluating their association with sexual precocity.The animals were divided into three groups according to age at first pregnancy: 1) 100 heifers considered to be sexually precocious that became pregnant at 15-16 months of age, 2) 100 heifers that became pregnant during the normal breeding season at 24 months of age, and 3) 100 heifers that did not become pregnant until 24 months of age. For the IGF-I gene, PCR-RFLP-SnaBI analysis showed the presence of genotypes AB and BB at frequencies of 0.02 and 0.98, respectively. Sequencing of the IGF-I gene fragment revealed a single nitrogen base change from cytosine to thymine, corresponding to the restriction site of SnaBI. The polymorphisms identified in the 5'-flanking region of the IGF-I gene may serve as a basis for future studies of molecular markers in cattle. For the PRL gene, PCR-RFLP-HaeIII analysis showed the presence of only one migration pattern, a finding characterizing the region studied as monomorphic. The study of other regions in the IGF-I and PRL genes might provide molecular data that can be used in the future for the selection of sexually precocious animals.

Sewage sludge as nitrogen and phosphorus source for cane-plant and first ratoon crops

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phenotypical characterization and adhesin identification in Escherichia coli strains isolated from dogs with urinary tract infections

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic characterization and nitrogen fixation capacity of Rhizobium strains on common bean

O objetivo deste trabalho foi a caracterização genética de quatro novas estirpes de Rhizobium e a avaliação de sua capacidade de fixação de N2 e nodulação, comparadas a estirpes comerciais e à população nativa de rizóbios de um Latossolo Vermelho. Dois experimentos foram conduzidos em blocos ao acaso, em casa de vegetação. No primeiro experimento, conduzido em tubetes com vermiculita, avaliaram-se a nodulação e a capacidade de fixação das novas estirpes, em comparação com as estirpes comerciais CIAT-899 e PRF-81 e com a população nativa do solo. Das colônias puras isoladas, extraiu-se o DNA genômico e realizou-se o seqüenciamento do espaço intergênico, para a caracterização genética das estirpes e da população nativa de rizóbios. O segundo experimento foi realizado em vasos com solo, para determinação da produtividade e da nodulação do feijoeiro, cultivar Pérola, com o uso das estirpes isoladamente ou em mistura com a PRF-81. A população nativa do solo foi identificada como Rhizobium sp. e se mostrou ineficiente na fixação de nitrogênio. Foram encontradas três espécies de Rhizobium entre as quatro novas estirpes. As estirpes LBMP-4BR e LBMP-12BR estão entre as que têm maior capacidade de nodulação e fixação de N2, e apresentam respostas diferenciadas quando misturadas à PRF-81.