Quality assurance for precast plants and treatment of imperfections for architectural facades

Quality is the threshold or minimum level required to satisfy the consumer´s demands. In construction the quality is objective, and established by standards. It is very difficult to establish the costs of “no quality” in construction. Each precast unit shall be traceable to a specific set of quality control records.

Long-term quality assurance of fMRI and MRS on a 3.0T clinical scanner

Functional MRI (fMRI) and Magnetic Resonance Spectroscopy (MRS) are being increasingly used in clinical protocols. Subsequenly it is crucial to develop a routine quality assurance protocol (QA)of both techniques. This work describes a long-term variability study, as apart of the QA of fMRI and MRS on our institution clinical 3.0 T MR scanner.

A constraint-based approach to quality assurance in service choreographies.

Knowledge about the quality characteristics (QoS) of service com- positions is crucial for determining their usability and economic value. Ser- vice quality is usually regulated using Service Level Agreements (SLA). While end-to-end SLAs are well suited for request-reply interactions, more complex, decentralized, multiparticipant compositions (service choreographies) typ- ically involve multiple message exchanges between stateful parties and the corresponding SLAs thus encompass several cooperating parties with interde- pendent QoS. The usual approaches to determining QoS ranges structurally (which are by construction easily composable) are not applicable in this sce- nario. Additionally, the intervening SLAs may depend on the exchanged data. We present an approach to data-aware QoS assurance in choreographies through the automatic derivation of composable QoS models from partici- pant descriptions. Such models are based on a message typing system with size constraints and are derived using abstract interpretation. The models ob- tained have multiple uses including run-time prediction, adaptive participant selection, or design-time compliance checking. We also present an experimen- tal evaluation and discuss the benefits of the proposed approach.

Quality assurance systems in the production and marketing of fresh peaches.

Due to the fast rate of peach post-harvest ripening, damage due to mechanical handling, externally appreciated as bruises and soft areas, is a real problem that leads to an early harvesting and poor quality of the fruits, as perceived by the consumers. More and more, the European consumer asks for good taste and freshness of fruits and vegetables, and these quality factors are not included in standards, nor in most of the producers' practices. Fruit processing and marketing centres (co-operatives) are increasingly interested in adopting quality controls in their processes. ISO 9000 procedures are being applied in some food areas, primarily milk and meat processors, but no generalised procedures have been developed until the present time to be applied to fresh product processes. All different peach and nectarine varieties that are harvested and handled in Murcia cooperatives and sold in a large supermarket in Madrid were analysed during the whole 1997 season (early May to late August). A total number of 78 samples of 25 fruits (co-operative) or 10 fruits (market), were tested in the laboratory for mechanical, optical, chemical and tasting quality. The variability and relationships between all these quality parameters are presented and discussed, and sampling unit sizes which would be advisable for quality control are calculated.

Bankable procedures for the technical quality assurance of large scale PV plants

Strict technical quality assurance procedures are essential for PV plant bankability. When large-scale PV plants are concerned, this is typically accomplished in three consecutive phases: an energy yield forecast, that is performed at the beginning of the project and is typically accomplished by means of a simulation exercise performed with dedicated software; a reception test campaign, that is performed at the end of the commissioning and consists of a set of tests for determining the efficiency and the reliability of the PV plant devices; and a performance analysis of the first years of operation, that consists in comparing the real energy production with the one calculated from the recorded operating conditions and taking into account the maintenance records. In the last six years, IES-UPM has offered both indoor and on-site quality control campaigns for more than 60 PV plants, with an accumulated power of more than 300 MW, in close contact with Engineering, Procurement and Construction Contractors and financial entities. This paper presents the lessons learned from such experience.

The Environmental Costs of Automobile-Centric Transportation Planning

Since the passage of the Federal-Aid Highway Act of 1956, the automobile has become the primary form of transportation on the Mississippi Gulf Coast. As the rate of motor vehicle use continues to rise faster than population growth, the benefits of the current transportation system are coming at a price that rivals annual household expenditures for housing. Furthermore, the automobile-centric transportation system incurs environmental costs. Carbon dioxide emissions, motor fuel use, health care costs for chronic illness, and the loss and impairment of natural resources due to sprawling development, continue to escalate. This project analyzes the environmental costs associated with automobile-centric planning for the urbanized area of the Mississippi Gulf Coast and compares these costs to those of alternative transportation modes.

The Effect of the Farmer Assurance Provision of the Consolidated and Continuing Appropriations Act, 2013 on Biodiversity and Global Food Security

A rider to a US law, the Consolidated and Continuing Appropriations Act, 2013, known as the Farmer Assurance Provision, encourages the large-scale genetic modification and global distribution of agricultural crops, thereby undermining the Food and Agriculture Organization of the United Nations' determination that food security rests on biodiversity. The rider blocks the US Department of Agriculture's mandate to prohibit farmers from growing crops from biotechnological seeds where the courts have found that this farm practice may cause damage to human health and/or degrade the environment. Despite genetically modified organisms (GMOs) reducing unwanted traits in plants, the paper supports the UN's mission for biodiversity and that more long-term testing was (and is) needed for GMO products, developed from 1994 on, before a hasty piece of Congressional legislation as was made in this case.

Development of a Strengths-Based Model for Insurance Automobile, Property, and Casualty Claims Operations

ABSTRACT \ Employers know that to have a successful organization, they must have the right people in the right jobs. But how will they know whom to place where? The development of a model based upon an individual's personality traits and strengths, and how to best use them, is a good place to start. Employees working in positions in which their traits and strengths are maximized enjoy work more, are more efficient, and are less apt to be absent or to look for work elsewhere. It is a mutually beneficial process of selection for both employers and employees. This model illustrates the process in an automobile and property insurance claims operation through utilization of the Myers-Briggs Type Indicators and the StrengthsFinder Profiles.

Viability study of automobile shredder residue as fuel

Car Fluff samples collected from a shredding plant in Italy were classified based on particle size, and three different size fractions were obtained in this way. A comparison between these size fractions and the original light fluff was made from two different points of view: (i) the properties of each size fraction as a fuel were evaluated and (ii) the pollutants evolved when each size fraction was subjected to combustion were studied. The aim was to establish which size fraction would be the most suitable for the purposes of energy recovery. The light fluff analyzed contained up to 50 wt.% fines (particle size < 20 mm). However, its low calorific value and high emissions of polychlorinated dioxins and furans (PCDD/Fs), generated during combustion, make the fines fraction inappropriate for energy recovery, and therefore, landfilling would be the best option. The 50–100 mm fraction exhibited a high calorific value and low PCDD/F emissions were generated when the sample was combusted, making it the most suitable fraction for use as refuse-derived fuel (RDF). Results obtained suggest that removing fines from the original ASR sample would lead to a material product that is more suitable for use as RDF.