Is socioeconomic position early in life associated with physical activity during adulthood following the accumulation of risk model with additive effects?

L'activité physique améliore la santé, mais seulement 4.8% des Canadiens atteignent le niveau recommandé. La position socio-économique est un des déterminants de l'activité physique les plus importants. Elle est associée à l’activité physique de manière transversale à l’adolescence et à l’âge adulte. Cette thèse a tenté de déterminer s'il y a une association à long terme entre la position socio-économique au début du parcours de vie et l’activité physique à l’âge adulte. S'il y en avait une, un deuxième objectif était de déterminer quel modèle théorique en épidémiologie des parcours de vie décrivait le mieux sa forme. Cette thèse comprend trois articles: une recension systématique et deux recherches originales. Dans la recension systématique, des recherches ont été faites dans Medline et EMBASE pour trouver les études ayant mesuré la position socio-économique avant l'âge de 18 ans et l'activité physique à ≥18 ans. Dans les deux recherches originales, la modélisation par équations structurelles a été utilisée pour comparer trois modèles alternatifs en épidémiologie des parcours de vie: le modèle d’accumulation de risque avec effets additifs, le modèle d’accumulation de risque avec effet déclenché et le modèle de période critique. Ces modèles ont été comparés dans deux cohortes prospectives représentatives à l'échelle nationale: la 1970 British birth cohort (n=16,571; première recherche) et l’Enquête longitudinale nationale sur les enfants et les jeunes (n=16,903; deuxième recherche). Dans la recension systématique, 10 619 articles ont été passés en revue par deux chercheurs indépendants et 42 ont été retenus. Pour le résultat «activité physique» (tous types et mesures confondus), une association significative avec la position socio-économique durant l’enfance fut trouvée dans 26/42 études (61,9%). Quand seulement l’activité physique durant les loisirs a été considérée, une association significative fut trouvée dans 21/31 études (67,7%). Dans un sous-échantillon de 21 études ayant une méthodologie plus forte, les proportions d’études ayant trouvé une association furent plus hautes : 15/21 (71,4%) pour tous les types et toutes les mesures d’activité physique et 12/15 (80%) pour l’activité physique de loisir seulement. Dans notre première recherche originale sur les données de la British birth cohort, pour la classe sociale, nous avons trouvé que le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux chez les hommes et les femmes pour l’activité physique de loisir, au travail et durant les transports. Dans notre deuxième recherche originale sur les données canadiennes sur l'activité physique de loisir, nous avons trouvé que chez les hommes, le modèle de période critique s’est ajusté le mieux aux données pour le niveau d’éducation et le revenu, alors que chez les femmes, le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux pour le revenu, tandis que le niveau d’éducation ne s’est ajusté à aucun des modèles testés. En conclusion, notre recension systématique indique que la position socio-économique au début du parcours de vie est associée à la pratique d'activité physique à l'âge adulte. Les résultats de nos deux recherches originales suggèrent un patron d’associations le mieux représenté par le modèle d’accumulation de risque avec effets additifs.

Subtractive and additive manufacturing technology in moulding industry

This report is a review of additive and subtractive manufacturing techniques. This approach (additive manufacturing) has resided largely in the prototyping realm, where the methods of producing complex freeform solid objects directly from a computer model without part-specific tooling or knowledge. But these technologies are evolving steadily and are beginning to encompass related systems of material addition, subtraction, assembly, and insertion of components made by other processes. Furthermore, these various additive processes are starting to evolve into rapid manufacturing techniques for mass-customized products, away from narrowly defined rapid prototyping. Taking this idea far enough down the line, and several years hence, a radical restructuring of manufacturing could take place. Manufacturing itself would move from a resource base to a knowledge base and from mass production of single use products to mass customized, high value, life cycle products, majority of research and development was focused on advanced development of existing technologies by improving processing performance, materials, modelling and simulation tools, and design tools to enable the transition from prototyping to manufacturing of end use parts.

Robust H.264/AVC video transmission using data partitioning and unequal loss protection

In this work, we present an adaptive unequal loss protection (ULP) scheme for H264/AVC video transmission over lossy networks. This scheme combines erasure coding, H.264/AVC error resilience techniques and importance measures in video coding. The unequal importance of the video packets is identified in the group of pictures (GOP) and the H.264/AVC data partitioning levels. The presented method can adaptively assign unequal amount of forward error correction (FEC) parity across the video packets according to the network conditions, such as the available network bandwidth, packet loss rate and average packet burst loss length. A near optimal algorithm is developed to deal with the FEC assignment for optimization. The simulation results show that our scheme can effectively utilize network resources such as bandwidth, while improving the quality of the video transmission. In addition, the proposed ULP strategy ensures graceful degradation of the received video quality as the packet loss rate increases. © 2010 IEEE.

Investigation of additive effects in enantioselective copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds

Significant enhancements in enantioselectivities and reaction efficiencies in asymmetric copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds in the presence of various group I salts are reported. For the first time in carbenoid chemistry, evidence for the critical role of the metal cation is described.

Gas/particle partitioning of carbonyls in the photooxidation of isoprene and 1,3,5-trimethylbenzene

A new denuder-filter sampling technique has been used to investigate the gas/particle partitioning behaviour of the carbonyl products from the photooxidation of isoprene and 1,3,5-trimethylbenzene. A series of experiments was performed in two atmospheric simulation chambers at atmospheric pressure and ambient temperature in the presence of NOx and at a relative humidity of approximately 50%. The denuder and filter were both coated with the derivatizing agent O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine (PFBHA) to enable the efficient collection of gas- and particle-phase carbonyls respectively. The tubes and filters were extracted and carbonyls identified as their oxime derivatives by GC-MS. The carbonyl products identified in the experiments accounted for around 5% and 10% of the mass of secondary organic aerosol formed from the photooxidation of isoprene and 1,3,5-trimethylbenzene respectively. Experimental gas/particle partitioning coefficients were determined for a wide range of carbonyl products formed from the photooxidation of isoprene and 1,3,5-trimethylbenzene and compared with the theoretical values based on standard absorptive partitioning theory. Photooxidation products with a single carbonyl moiety were not observed in the particle phase, but dicarbonyls, and in particular, glyoxal and methylglyoxal, exhibited gas/particle partitioning coefficients several orders of magnitude higher than expected theoretically. These findings support the importance of heterogeneous and particle-phase chemical reactions for SOA formation and growth during the atmospheric degradation of anthropogenic and biogenic hydrocarbons.

Testing for biases in selection on avian reproductive traits and partitioning direct and indirect selection using quantitative genetic models

Key life history traits such as breeding time and clutch size are frequently both heritable and under directional selection, yet many studies fail to document micro-evolutionary responses. One general explanation is that selection estimates are biased by the omission of correlated traits that have causal effects on fitness, but few valid tests of this exist. Here we show, using a quantitative genetic framework and six decades of life-history data on two free-living populations of great tits Parus major, that selection estimates for egg-laying date and clutch size are relatively unbiased. Predicted responses to selection based on the Robertson-Price Identity were similar to those based on the multivariate breeder’s equation, indicating that unmeasured covarying traits were not missing from the analysis. Changing patterns of phenotypic selection on these traits (for laying date, linked to climate change) therefore reflect changing selection on breeding values, and genetic constraints appear not to limit their independent evolution. Quantitative genetic analysis of correlational data from pedigreed populations can be a valuable complement to experimental approaches to help identify whether apparent associations between traits and fitness are biased by missing traits, and to parse the roles of direct versus indirect selection across a range of environments.

Transferability of Regional Permafrost Disturbance Susceptibility Modelling Using Generalized Linear and Generalized Additive Models

To effectively assess and mitigate risk of permafrost disturbance, disturbance-p rone areas can be predicted through the application of susceptibility models. In this study we developed regional susceptibility models for permafrost disturbances using a field disturbance inventory to test the transferability of the model to a broader region in the Canadian High Arctic. Resulting maps of susceptibility were then used to explore the effect of terrain variables on the occurrence of disturbances within this region. To account for a large range of landscape charac- teristics, the model was calibrated using two locations: Sabine Peninsula, Melville Island, NU, and Fosheim Pen- insula, Ellesmere Island, NU. Spatial patterns of disturbance were predicted with a generalized linear model (GLM) and generalized additive model (GAM), each calibrated using disturbed and randomized undisturbed lo- cations from both locations and GIS-derived terrain predictor variables including slope, potential incoming solar radiation, wetness index, topographic position index, elevation, and distance to water. Each model was validated for the Sabine and Fosheim Peninsulas using independent data sets while the transferability of the model to an independent site was assessed at Cape Bounty, Melville Island, NU. The regional GLM and GAM validated well for both calibration sites (Sabine and Fosheim) with the area under the receiver operating curves (AUROC) N 0.79. Both models were applied directly to Cape Bounty without calibration and validated equally with AUROC's of 0.76; however, each model predicted disturbed and undisturbed samples differently. Addition- ally, the sensitivity of the transferred model was assessed using data sets with different sample sizes. Results in- dicated that models based on larger sample sizes transferred more consistently and captured the variability within the terrain attributes in the respective study areas. Terrain attributes associated with the initiation of dis- turbances were similar regardless of the location. Disturbances commonly occurred on slopes between 4 and 15°, below Holocene marine limit, and in areas with low potential incoming solar radiation

Polymer Process Partitioning: Extruding Plastic Pipe

When plastic pipe is solidified, it proceeds through a long cooling chamber. Inside this chamber, inside the hollow extrudate, the plastic is molten, and this inner surface solidifies last. Sag, the flow due to the self-weight of the molten plastic, then happens in this cooling chamber, and sometimes, thickened regions (called knuckles) arise in the lower quadrants, especially of large diameter thickwalled pipes. To compensate for sag, engineers normally shift the die centerpiece downward. This thesis focuses on the consequences of this decentering. Specifically, when the molten polymer is viscoelastic, as is normally the case, a downward lateral force is exerted on the mandrel. Die eccentricity also affects the downstream axial force on the mandrel. These forces govern how rigidly the mandrel must be attached (normally, on a spider die). We attack this flow problem in eccentric cylindrical coordinates, using the Oldroyd 8-constant constitutive model framework. Specifically, we revise the method of Jones (1964), called polymer process partitioning. We estimate both axial and lateral forces. We develop a corresponding map to help plastics engineers predict the extrudate shape, including extrudate knuckles. From the mass balance over the postdie region, we then predict the shape of the extrudate entering the cooling chamber. We further include expressions for the stresses in the extruded polymer melt. We include detailed dimensional worked examples to show process engineers how to use our results to design pipe dies, and especially to suppress extrudate knuckling.

Process Monitoring and Defect Detection of Additive Manufacturing Using Inline Coherent Imaging

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

Comparazione strutturale di componenti realizzati a terra e nello spazio mediante tecniche additive

Questo lavoro di tesi mira ad indagare, a livello preliminare, quali siano i vantaggi e gli svantaggi a livello strutturale legati alla possibilità di realizzare componenti per mezzi spaziali con tecnologie di Rapid Prototyping direttamente nello spazio: questa possibilità verrà confrontata con il caso in cui gli stessi componenti siano realizzati a terra e poi inviati nello spazio con un lanciatore. Nonostante si siano riscontrati dei limiti derivanti dalla carenza di dati tecnici sulle caratteristiche meccaniche dei materiali, è stata sviluppata una metodologia che ha fornito l’opportunità, seppur con grandi approssimazioni, di valutare il problema. Il punto di partenza dell’attività è stato quello di visionare figure ed immagini di mezzi spaziali e di scegliere alcuni componenti che possano essere oggetto di manutenzione o sostituzione in volo. Sei componenti sono stati poi modellati al CAD, ed è stata condotta un’analisi ad elementi finiti (FEM) mediante il software MSC Patran/Nastran, con lo scopo di simulare la risposta strutturale nelle diverse condizioni di carico prese in considerazione. Seppur a livello qualitativo e del tutto preliminare, sono stati svolti dei confronti in termini di massa e tensioni per valutare in quali casi sembra sia conveniente realizzare un componente a terra con tecnologie tradizionali, e in quali sembra sia vantaggioso utilizzare nuove tecnologie di prototipazione rapida stampando direttamente il componente nello spazio.

Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

Thesis (Master's)--University of Washington, 2016-08

Evaluation of Select Food Additive Exposures in Children with Crohn's Disease

Thesis (Master's)--University of Washington, 2016-09

Mesh partitioning: A multilevel balancing and refinement algorithm

Multilevel algorithms are a successful class of optimisation techniques which address the mesh partitioning problem. They usually combine a graph contraction algorithm together with a local optimisation method which refines the partition at each graph level. In this paper we present an enhancement of the technique which uses imbalance to achieve higher quality partitions. We also present a formulation of the Kernighan-Lin partition optimisation algorithm which incorporates load-balancing. The resulting algorithm is tested against a different but related state-of the-art partitioner and shown to provide improved results.