Compositional data analysis in archaeometry

We shall call an n × p data matrix fully-compositional if the rows sum to a constant, and sub-compositional if the variables are a subset of a fully-compositional data set1. Such data occur widely in archaeometry, where it is common to determine the chemical composition of ceramic, glass, metal or other artefacts using techniques such as neutron activation analysis (NAA), inductively coupled plasma spectroscopy (ICPS), X-ray fluorescence analysis (XRF) etc. Interest often centres on whether there are distinct chemical groups within the data and whether, for example, these can be associated with different origins or manufacturing technologies

Estudi dels carotenoides en espècies marrons de bacteris verds del sofre: diversitat, eco-fisiologia i regulació

El present treball es centra en l'estudi a diferents nivells dels carotenoides de les espècies marrons de Bacteris Verds del Sofre (GSB, de l'anglès Green Sulfur Bacteria). L'objectiu global ha estat el d'esbrinar quina és la funció d'aquests pigments dins l'aparell fotosintètic d'aquests microorganismes i aprofundir en el coneixement de la seva estructura i interaccions amb els altres pigments de l'aparell fotosintètic. En primer lloc es va dissenyar un nou mètode de cromatografia líquida d'alta resolució (HPLC) per analitzar de manera més ràpida i precisa els carotenoides de diferents soques de GSB (Capítol 3). Aquest mètode es basa en una purificació prèvia dels extractes pigmentaris amb columnes d'alúmina per eliminar les bacterioclorofil·les (BCls). Això va permetre analitzar amb una elevada resolució i en tan sols 45 min de carrera cromatogràfica els diferents carotenoides i els seus precursors, així com les configuracions trans i cis dels seus isòmers. El segon mètode utilitzat va consistir en una modificació del mètode de Borrego i Garcia-Gil (1994) i va permetre la separació precisa de tot tipus de pigments, procedents tant de cultius purs com de mostres de caràcter complex. Un exemple concret foren uns paleosediments de la zona lacustre de Banyoles. En aquests sediments (0,7-1,5 milions d'anys d'antiguitat) es van detectar, entre d'altres pigments, carotenoides específics de les espècies marrons de GSB, la qual cosa va permetre confirmar la presència d'aquests bacteris a la zona lacustre de Banyoles ja des del Pleistocè inferior. En aquest primer capítol també es van analitzar els carotenoides de Chlorobium (Chl.) phaeobacteroides CL1401 mitjançant cromatografia líquida acoblada a espectrometria de masses (LC-MS/MS), amb l'objectiu de confirmar la seva identificació i el seu pes molecular. A més, també es va avaluar l'efecte de la temperatura, la llum i diferents agents oxidants i reductors en la composició quantitativa i qualitativa dels carotenoides i les BCls d'aquesta espècie. Això va permetre confirmar el caràcter fotosensible de les BCls i que els isòmers trans/cis dels diferents carotenoides no són artefactes produïts durant la manipulació de les mostres, sinó que són constitutius de l'aparell fotosintètic d'aquests microorganismes. El Capítol 4 inclou els experiments de fisiologia duts a terme amb algunes espècies de GSB, a partir dels quals es va intentar esbrinar la dinàmica de síntesi dels diferents pigments de l'aparell fotosintètic (BCl antena, BCl a i carotenoides) durant el creixement d'aquestes espècies. Aquestes investigacions van permetre monitoritzar també els canvis en el nombre de centres de reacció (CR) durant el procés d'adaptació lumínica. La determinació experimental del nombre de CR es va realitzar a partir de la quantificació de la BCl663, l'acceptor primari en la cadena de transport d'electrons dels GSB. L'estimació del nombre de CR/clorosoma es va realitzar tant a partir de dades estequiomètriques i biomètriques presents a la bibliografia, com a partir de les dades experimentals obtingudes en el present treball. El bon ajust obtingut entre les diferents estimacions va donar solidesa al valor estequiomètric calculat, que fou, com a promig, d'uns 70 CR per clorosoma. En aquest capítol de fisiologia també es van estudiar les variacions en les relacions trans/cis pels principals carotenoides de les espècies marrons de GSB. Aquestes es van determinar a partir de cultius purs de laboratori i de poblacions naturals de GSB. Pel que fa als valors trobats en cultius de laboratori no es van observar diferències destacades entre el valor calculat a alta intensitat de llum i el calculat a baixa intensitat, essent en ambdós casos proper a 2. En els clorosomes aïllats de diferents soques marrons aquest quocient prengué un valor similar tant pels isòmers de l'isorenieratè (Isr) com pels del -isorenieratè (-Isr). En poblacions naturals de Chl. phaeobacteroides aquesta relació va ser també de 2 isòmers trans per cada isòmer cis, mantenint-se constant tant en fondària com al llarg del temps. Finalment, en el Capítol 5 es presenta un marcador molecular que permet la identificació específica d'espècies marrons de GSB. Malgrat que inicialment aquest marcador fou dissenyat a partir d'un gen implicat en la síntesi de carotenoides (crtY, el qual codifica per a una licopè ciclasa) la seqüència final a partir de la qual s'han aconseguit els encebadors selectius està relacionada amb la família de proteïnes de les Policètid-ceto-sintases (PKT). Tot i així, l'eina dissenyada pot ser de gran utilitat per a la discriminació d'espècies marrons de GSB respecte les verdes en poblacions mixtes com les que es troben en ambients naturals i obre la porta a futurs experiments d'ecologia microbiana utilitzant tècniques com la PCR en temps real, que permetria la monitorització selectiva de les poblacions d'espècies marrons de GSB en ecosistemes naturals.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

Who am I? An identity crisis Identity in the new museologies and the role of the museum professional

Whilst the title of this essay suggests more than one “new museology”, it was rather a licence poétique to emphasize the two major theoretical movements that have evolved in the second half of the 20th Century[1]. As a result of the place(s)/contexts where they originated, and for clarity purposes, they have been labelled in this essay as the “Latin new museology” and the “Anglo-Saxon new museology”; however they both identify themselves by just the name of “New Museology”. Even though they both shared similar ideas on participation and inclusion, the language barriers were probably the cause for many ideas not to be fully shared by both groups. The “Latin New museology” was the outcome of a specific context that started in the 1960s (de Varine 1996); being a product of the “Second Museum Revolution”(1970s)[2], it provided new perceptions of heritage, such as “common heritage”. In 1972 ICOM organized the Santiago Round Table, which advocated for museums to engage with the communities they serve, assigning them a role of “problem solvers” within the community (Primo 1999:66). These ideas lead to the concept of the Integral Museum. The Quebec Declaration in 1984 declared that a museum’s aim should be community development and not only “the preservation of past civilisations’ material artefacts”, followed by the Oaxtepec Declaration that claimed for the relationship between territory-heritage-community to be indissoluble (Primo 1999: 69). Finally, in 1992, the Caracas Declaration argued for the museum to “take the responsibility as a social manager reflecting the community’s interests”(Primo 1999: 71). [1] There have been at least three different applications of the term ( Peter van Mensch cited in Mason: 23) [2] According to Santos Primo, this Second Museum Revolution was the result of the Santiago Round Table in Chile, 1972, and furthered by the 1st New Museology International Workshop (Quebec, 1984), Oaxtepec Meeting (Mexico, 1984) and the Caracas Meeting (Venezuela, 1992) (Santos Primo : 63-64)

Achieving accurate FTIR measurements on high performance bandpass filters

The sources of ordinate error in FTIR spectrometers are reviewed with reference to measuring small out-of-band features in the spectra of bandpass filters. Procedures for identifying instrumental artefacts are described. It is shown that features well below 0.01%T can be measured reliably.

Multi-modal fingerprinting for multimedia assets: optimisation of media security protection in online distribution environments

Since the advent of the internet in every day life in the 1990s, the barriers to producing, distributing and consuming multimedia data such as videos, music, ebooks, etc. have steadily been lowered for most computer users so that almost everyone with internet access can join the online communities who both produce, consume and of course also share media artefacts. Along with this trend, the violation of personal data privacy and copyright has increased with illegal file sharing being rampant across many online communities particularly for certain music genres and amongst the younger age groups. This has had a devastating effect on the traditional media distribution market; in most cases leaving the distribution companies and the content owner with huge financial losses. To prove that a copyright violation has occurred one can deploy fingerprinting mechanisms to uniquely identify the property. However this is currently based on only uni-modal approaches. In this paper we describe some of the design challenges and architectural approaches to multi-modal fingerprinting currently being examined for evaluation studies within a PhD research programme on optimisation of multi-modal fingerprinting architectures. Accordingly we outline the available modalities that are being integrated through this research programme which aims to establish the optimal architecture for multi-modal media security protection over the internet as the online distribution environment for both legal and illegal distribution of media products.

The excavation report as a literary genre: traditional practice in Britain

Although ways of thinking about the past have changed, in Britain the reporting of excavations has followed a series of shared conventions for nearly 100 years. This article considers two of them. It investigates the relationship between accounts of stratigraphic evidence and the publication of the associated artefacts and ecofacts and suggests that it results from the combination of two separate intellectual traditions in the late nineteenth century. It also identifies certain widely shared proportions between the separate components of excavation monographs published over a long period of time. Their existence has never been acknowledged. The excavation report has become a well-established literary genre and authors who are familiar with such texts unconsciously reproduce the same structures in their writing.

Silchester Roman Town Insula IX: the development of an urban property c. AD 40-50 - c. AD 250

The development of an urban property in the Roman town of Calleva Atrebatum (Silchester, Hampshire, England) is traced from the late 1st to the mid-3rd century AD. Three successive periods of building with their associated finds of artefacts and biological remains are described and interpreted with provisional reconstructions of the buildings. Links are provided to a copy of the Integrated Archaeological Database (IADB), archived by the Archaeology Data Service, which holds the primary excavation and finds records.

Terrestrial implications for the maritime geoarchaeological resource: A view from the Lower Palaeolithic

Stone tools and faunal remains have been recovered from the English Channel and the North Sea through trawling, dredging for aggregates, channel clearance, and coring. These finds highlight the potential for a maritime Lower Palaeolithic archaeological resource. It is proposed here that any Lower Palaeolithic artefacts, faunal remains, and sediments deposited in the maritime zone during dry, low-stand phases were once (and may still be) contextually similar to their counterparts in the terrestrial Lower Palaeolithic records of north-western Europe. Given these similarities, can interpretive models and analytical frameworks developed for terrestrial archaeology be profitably applied to an assessment of the potential value of any maritime resource? The terrestrial geoarchaeological resource for the Lower Palaeolithic is dominated by artefacts and ecofacts that have been fluvially reworked. The spatio-temporal resolution of these data varies from entire river valleys and marine isotope stages to river channel gravel bar surfaces and decadal timescales, thus supporting a variety of questions and approaches. However, the structure of the terrestrial resource also highlights two fundamental limitations in current maritime knowledge that can restrict the application of terrestrial approaches to any potential maritime resource: (i) how have the repetitive transgressions and regressions of the Middle and Late Pleistocene modified the terrace landforms and sediments associated with the river systems of the English Channel and southern North Sea basins?; and (ii) do the surviving submerged terrace landforms and fluvial sedimentary deposits support robust geochronological models, as is the case with the classical terrestrial terrace sequences? This paper highlights potential approaches to these questions, and concludes that the fluvial palaeogeography, Pleistocene fossils, and potential Lower Palaeolithic artefacts of the maritime geoarchaeological resource can be profitably investigated in future as derived, low-resolution data sets, facilitating questions of colonisation, occupation, demography, and material culture.

'Operation motorway': landscapes of construction on England's M1 motorway

Recent years have seen an increasing number of academics attempt to write more process-oriented and 'nonrepresentational' accounts of landscape. Drawing upon this literature, I discuss a number of the movements, materialities, and practices entailed in constructing England's M1 motorway in the late 1950s. The performances, movements and durability of a diverse range of things-including earth-moving machines, public relations brochures, maps, helicopters, senior engineers, aggregate and labourers-are shown to be important to the construction and ordering of the motorway and spaces of the construction company in different times and spaces, with people's experiences or understandings of construction, both now and in the past, emerging through memories, talk and embodied encounters with architectures, texts and artefacts which are assembled, circulated and/or archived. Aerial perspectives assumed a prominent role in depictions of construction, while journalists and engineers frequently drew upon a military vocabulary and alluded to the military nature of the project when discussing the motorway. (c) 2005 Elsevier Ltd. All rights reserved.

Sexual symbolism in the Early Neolithic of the southern Levant: pestles and mortars from WF16

WF16 is a Pre-Pottery Neolithic site in the Southern Levant that has produced an important collection of ground stone artefacts. These include one explicit and one ambiguous representation of a phallus – the latter may be a human head and shoulders. The authors note the visual similarity of certain pestles from WF16 to phalli and suggest that such artefacts and their use may have been imbued with sexual metaphor. As such, the most potent references to sex, reproduction and fertility in the early Neolithic may not be the exotic figures claimed to be ‘Mother Goddesses’ but located in the most mundane of domestic artefacts.

Developments in radiocarbon calibration for archaeology

This update on radiocarbon calibration results from the 19th International Radiocarbon Conference at Oxford in April 2006, and is essential reading for all archaeologists. The way radiocarbon dates and absolute dates relate to each other differs in three periods: back to 12400 cal BR radiocarbon dates can be calibrated with tree rings, and the calibration curve in this form should soon extend back to 18 000 cal BP Between 12 400 and 26000 cal BR the calibration curves are based on marine records, and thus are only a best estimate of atmospheric concentrations. Beyond 26000 cal BR dates have to be based on comparison (rather than calibration) with a variety of records. Radical variations are thus possible in this period, a highly significant caveat,for the dating of middle and lower Paleolithic art, artefacts and animal and human remains.

Supporting Computer-supported collaborative work (CSCW) in conceptual design

In order to gain a better understanding of online conceptual collaborative design processes this paper investigates how student designers make use of a shared virtual synchronous environment when engaged in conceptual design. The software enables users to talk to each other and share sketches when they are remotely located. The paper describes a novel methodology for observing and analysing collaborative design processes by adapting the concepts of grounded theory. Rather than concentrating on narrow aspects of the final artefacts, emerging “themes” are generated that provide a broader picture of collaborative design process and context descriptions. Findings on the themes of “grounding – mutual understanding” and “support creativity” complement findings from other research, while important themes associated with “near-synchrony” have not been emphasised in other research. From the study, a series of design recommendations are made for the development of tools to support online computer-supported collaborative work in design using a shared virtual environment.

On defining base units in terms of fundamental constants

The definitions of the base units of the international system of units have been revised many times since the idea of such an international system was first conceived at the time of the French revolution. The objective today is to define all our units in terms of 'invariants of nature', i.e. by referencing our units to the fundamental constants of physics, or the properties of atoms, rather than the characteristics of our planet or of artefacts. This situation is reviewed, particularly in regard to finding a new definition of the kilogram to replace its present definition in terms of a prototype material artefact.