Genetic and non-genetic factors affecting birth-weight and adult body mass index

Birthweight affects neonatal mortality and morbidity and has been used as a marker of foetal undernutrition in studies of prenatal effects on adult characteristics. It is potentially influenced by genetic and environmental influences on the mother, and effects of foetal genotype, which is partially derived from the maternal genotype. Interpretations of variation in birthweight and associated characteristics as being due to prenatal environment ignore other possible modes of materno-foetal transmission. Subjects were adult twins recruited through the Australian Twin Registry, aged 17 to 87 years, and the sample comprised 1820 men and 4048 women. Twins reported their own birthweight as part of a health questionnaire. Body Mass Index (BMI) was calculated from self-reports of height and weight. Correlations between co-twins' birthweights were high for both monozygotic (r = 0.77) and dizygotic (r = 0.67) pairs, leading to substantial estimates of shared environmental effects (56% of variance) with significant additive genetic (23%) and non-shared environmental (21%) components. Adult BMI was mainly influenced by genetic factors, both additive (36% of variance) and nonadditive (35%). The correlation between birthweight and BMI was positive, in that heavier babies became on average more obese adults. A bivariate model of birthweight and adult BMI showed significant positive genetic (rg = 0.16, p = 0.005) and environmental (re = 0.08, p = 0.000011) correlations. Intra-uterine environmental or perinatal influences shared by cotwins exercise a strong influence on birthweight, but the factors which affect both birthweight and adult BMI are partly genetic and partly non-shared environmental.

Genetic influence on the variance in P3 amplitude and latency

The P3(00) event-related potential (ERP) component is widely used as a measure of cognitive functioning and provides a sensitive electrophysiological index of the attentional and working memory demands of a task. This study investigated what proportion of the variance in the amplitude and latency of the P3, elicited in a delayed response working memory task, could be attributed to genetic factors. In 335 adolescent twin pairs and 48 siblings, the amplitude and latency of the P3 were examined at frontal, central, and parietal sites. Additive genetic factors accounted for 48% to 61% of the variance in P3 amplitude. Approximately one-third of the genetic variation at frontal sites was mediated by a common genetic factor that also influenced the genetic variation at parietal and central sites. Familial resemblance in P3 latency was due to genetic influence that accounted for 44% to 50% of the variance. Genetic covariance in P3 latency across sites was substantial, with a large part of the variance found at parietal, central, and frontal sites attributed to a common genetic factor. The findings provide further evidence that the P3 is a promising phenotype of neural activity of the brain and has the potential to be used in linkage and association analysis in the search for quantitative trait loci (QTLs) influencing cognition.

Schistosoma japonicum cathepsin D aspartic protease cleaves human IgG and other serum components

Recombinant cathepsin D aspartic protease of Schistosoma japonicum cleaved human IgG in vitro in a time and dose-dependent manner. Optimal cleavage was seen at pH 3.6-4.5; modest cleavage remained at pH 5.0, and no cleavage was detected above pH 5.0. Amino terminal sequencing of the major cleavage fragments of human IgG identified a Fab fragment from the VH1 domain, and 2 cleavage sites in the CH2 domain below the hinge region. The P1 and P1' residues at the 2 CH2 cleavage sites were Phe254-Leu255 and Leu325-Thr326, indicating a preference by the schistosome protease for bulky hydrophobic residues flanking the scissile bond. No cleavage of the immunoglobulin light chain was detected. In addition, the recombinant schistosome protease indiscriminately degraded the human serum proteins complement C3 and serum albumin into numerous small fragments. These results demonstrate specific cleavage of human IgG by the recombinant schistosome aspartic protease, and highlight the broad range digestive specificity of the enzyme which may play a role in the degradation of host serum proteins ingested as part of the schistosome bloodmeal.

Repeated blood pressure measurements in a sample of Swedish twins: heritabilities and associations with polymorphisms in the renin-angiotensin-aldosterone system Iliadou, Anastasia, Lichtenstein, Paul, Morgenstern, Ralf, Forsberg, Lena, Svensson, Richard, de Faire, Ulf, Martin, Nicholas, Pedersen, Nancy

Background Twin and family studies have shown that genetic effects explain a relatively high amount of the phenotypic variation in blood pressure. However, many studies have not been able to replicate findings of association between specific polymorphisms and diastolic and systolic blood pressure. Methods In a structural equation-modelling framework the authors investigated longitudinal changes in repeated measures of blood pressures in a sample of 298 like-sexed twin pairs from the population-based Swedish Twin Registry. Also examined was the association between blood pressure and polymorphisms in the angiotensin-I converting enzyme and the angiotensin 11 receptor type 1 with the 'Fulker' test Both linkage and association were tested simultaneously revealing whether the polymorphism is a Quantitative Trait Locus (QTL) or in linkage disequilibrium with the QTL. Results Genetic influences explained up to 46% of the phenotypic variance in diastolic and 63% of the phenotypic variance in systolic blood pressure. Genetic influences were stable over time and contributed up to 78% of the phenotypic correlation in both diastolic and systolic blood pressure. Non-shared environmental effects were characterised by time specific influences and little transmission from one time point to the next. There was no significant linkage and association between the polymorphisms and blood pressure. Conclusions There is a considerable genetic stability in both diastolic and systolic blood pressure for a 6-year period of time in adult life. Non-shared environmental influences have a small long-term effect Although associations with the polymorphisms could not be replicated, results should be interpreted with caution due to power considerations. (C) 2002 Lippincott Williams Wilkins.

Adaptive multiscale principal components analysis for online monitoring of wastewater treatment

Fault detection and isolation (FDI) are important steps in the monitoring and supervision of industrial processes. Biological wastewater treatment (WWT) plants are difficult to model, and hence to monitor, because of the complexity of the biological reactions and because plant influent and disturbances are highly variable and/or unmeasured. Multivariate statistical models have been developed for a wide variety of situations over the past few decades, proving successful in many applications. In this paper we develop a new monitoring algorithm based on Principal Components Analysis (PCA). It can be seen equivalently as making Multiscale PCA (MSPCA) adaptive, or as a multiscale decomposition of adaptive PCA. Adaptive Multiscale PCA (AdMSPCA) exploits the changing multivariate relationships between variables at different time-scales. Adaptation of scale PCA models over time permits them to follow the evolution of the process, inputs or disturbances. Performance of AdMSPCA and adaptive PCA on a real WWT data set is compared and contrasted. The most significant difference observed was the ability of AdMSPCA to adapt to a much wider range of changes. This was mainly due to the flexibility afforded by allowing each scale model to adapt whenever it did not signal an abnormal event at that scale. Relative detection speeds were examined only summarily, but seemed to depend on the characteristics of the faults/disturbances. The results of the algorithms were similar for sudden changes, but AdMSPCA appeared more sensitive to slower changes.

How reliably do rheumatologists measure shoulder movement?

Objective: To assess the intrarater and interrater reliability among rheumatologists of a standardised protocol for measurement of shoulder movements using a gravity inclinometer. Methods: After instruction, six rheurnatologists independently assessed eight movements of the shoulder, including total and glenohumeral flexion, total and glenohumeral abduction, external rotation in neutral and in abduction, internal rotation in abduction and hand behind back, in random order in six patients with shoulder pain and stiffness according to a 6x6 Latin square design using a standardised protocol. These assessments were then repeated. Analysis of variance was used to partition total variability into components of variance in order to calculate intraclass correlation coefficients (ICCs). Results: The intrarater and interrater reliability of different shoulder movements varied widely. The movement of hand behind back and total shoulder flexion yielded the highest ICC scores for both intrarater reliability (0.91 and 0.83, respectively) and interrater reliability (0.80 and 0.72, respectively). Low ICC scores were found for the movements of glenohumeral abduction, external rotation in abduction, and internal rotation in abduction (intrarater ICCs 0.35, 0.43, and 0.32, respectively), and external rotation in neutral, external rotation in abduction, and internal rotation in abduction (interrater ICCs 0.29, 0.11, and 0.06, respectively). Conclusions: The measurement of shoulder movements using a standardised protocol by rheumatologists produced variable intrarater and interrater reliability. Reasonable reliability was obtained only for the movement of hand behind back and total shoulder flexion.

Yield response of rice (Oryza sativa L.) genotypes to different types of drought under rainfed lowlands - Part 1. Grain yield and yield components

Responses of rice genotypes to drought stress may be different when characteristics of the drought stress environments differ. The performance of 128 genotypes was examined under irrigation and four different types of drought stress, to determine genotypic consistency in yield and factors determining yields under different drought stress conditions. The different drought conditions were mild drought during grain filling, short and severe drought at flowering, prolonged severe drought during the reproductive to grain filling, and prolonged mild drought during vegetative and grain filling. Genotypic grain yield under mild stress conditions was associated with yield under irrigated conditions, indicating the importance of potential yield in environments where the yield reduction was less than 50%. However, yields under irrigated conditions differed over time and locations. Under prolonged or severe drought conditions, flowering time was an important determinant of grain yield. Earlier flowering genotypes escaped the severe stress and had higher grain yields indicating large genotype by environment (G x E) interactions which have implications for plant breeding even for mild stress. It is suggested that variations in flowering time, potential yields and drought patterns need to be considered for development of drought-resistant cultivars using specific physiological traits. (C) 2002 Elsevier Science B.V. All rights reserved.

Levene tests of homogeneity of variance for general block and treatment designs

This article develops a weighted least squares version of Levene's test of homogeneity of variance for a general design, available both for univariate and multivariate situations. When the design is balanced, the univariate and two common multivariate test statistics turn out to be proportional to the corresponding ordinary least squares test statistics obtained from an analysis of variance of the absolute values of the standardized mean-based residuals from the original analysis of the data. The constant of proportionality is simply a design-dependent multiplier (which does not necessarily tend to unity). Explicit results are presented for randomized block and Latin square designs and are illustrated for factorial treatment designs and split-plot experiments. The distribution of the univariate test statistic is close to a standard F-distribution, although it can be slightly underdispersed. For a complex design, the test assesses homogeneity of variance across blocks, treatments, or treatment factors and offers an objective interpretation of residual plot.

Using crop simulation to generate genotype by environment interaction effects for sorghum in water-limited environments

Multi-environment trials (METs) used to evaluate breeding lines vary in the number of years that they sample. We used a cropping systems model to simulate the target population of environments (TPE) for 6 locations over 108 years for 54 'near-isolines' of sorghum in north-eastern Australia. For a single reference genotype, each of 547 trials was clustered into 1 of 3 'drought environment types' (DETs) based on a seasonal water stress index. Within sequential METs of 2 years duration, the frequencies of these drought patterns often differed substantially from those derived for the entire TPE. This was reflected in variation in the mean yield of the reference genotype. For the TPE and for 2-year METs, restricted maximum likelihood methods were used to estimate components of genotypic and genotype by environment variance. These also varied substantially, although not in direct correlation with frequency of occurrence of different DETs over a 2-year period. Combined analysis over different numbers of seasons demonstrated the expected improvement in the correlation between MET estimates of genotype performance and the overall genotype averages as the number of seasons in the MET was increased.

Evolution of additive and nonadditive genetic variance in development time along a cline in Drosophila serrata

Latitudinal clines provide natural systems that may allow the effect of natural selection on the genetic variance to be determined. Ten clinal populations of Drosophila serrata collected from the eastern coast of Australia were used to examine clinal patterns in the trait mean and genetic variance of the life-history trait egg-to-adult development time. Development time significantly lengthened from tropical areas to temperate areas. The additive genetic variance for development time in each population was not associated with latitude but was associated with the population mean development time. Additive genetic variance tended to be larger in populations with more extreme development times and appeared to be consistent with allele frequency change. In contrast, the nonadditive genetic variance was not associated with the population mean but was associated with latitude. Levels of nonadditive genetic variance were greatest in the region of the cline where the gradient in the change in mean was greatest, consistent with Barton's (1999) conjecture that the generation of linkage disequilibrium may become an important component of the genetic variance in systems with a spatially varying optimum.

Effects of seawater components on immature Culicoides molestus (Skuse) (Diptera : Ceratopogonidae)

Following analysis of beach sites and an indication that seawater components might influence larval occurrence, we studied the impact of increasing salinity and seawater concentration on survival of fourth-instar larvae of the canal biting midge, Culicoides molestus . While NaCl had little effect on immature survival, increasing the concentration of seawater increased mortality prior to the adult stage. Seawater at three and four times the normal concentration killed all immatures. Artificial elevation of seawater concentration in the sandy substrate preferred by larvae, therefore, has the potential to reduce immature midge survival. Diet also affected survival, with higher mortality of immatures that were fed fish-food flakes compared with those that were fed live nematodes.

Tool support for testing concurrent Java components

Concurrent programs are hard to test due to the inherent nondeterminism. This paper presents a method and tool support for testing concurrent Java components. Too[ support is offered through ConAn (Concurrency Analyser), a too] for generating drivers for unit testing Java classes that are used in a multithreaded context. To obtain adequate controllability over the interactions between Java threads, the generated driver contains threads that are synchronized by a clock. The driver automatically executes the calls in the test sequence in the prescribed order and compares the outputs against the expected outputs specified in the test sequence. The method and tool are illustrated in detail on an asymmetric producer-consumer monitor. Their application to testing over 20 concurrent components, a number of which are sourced from industry and were found to contain faults, is presented and discussed.

Os fundos de investimento imobiliário listados em bolsa e as variáveis que influenciam seus retornos

Os fundos de investimento imobiliário combinam características tanto do mercado imobiliário, fonte de seus rendimentos, quanto do mercado de capitais, ambiente em que são negociados. O impacto de cada um desses mercados subjacentes no comportamento, desempenho e risco dessa classe de ativos não é, no entanto, ainda claramente definida, sendo um dos grandes temas em análise, tanto na literatura acadêmica, quanto na indústria de fundos internacionais. Em face da significativa expansão dessa alternativa de investimento no mercado brasileiro, no presente estudo foram analisadas as variáveis que influenciam os retornos dos fundos imobiliários brasileiros para uma amostra de fundos listados em Bolsa de Valores de São Paulo, período de 2008-2013. Seguindo a metodologia de Clayton e Mackinnon (2003), os fatores explicativos dos retornos foram decompostos em quatro componentes principais, sendo três fatores de retorno de mercado (mercado de ações, mercado de renda fixa e mercado imobiliário) e risco idiossincrático. De acordo com a estatística descritiva, os fundos imobiliários da amostra apresentaram maior retorno em relação aos demais mercados, exceto em comparação com o mercado imobiliário, porém com menor risco. As análises de correlação, regressão e decomposição da variância indicam que o mercado de ações e o mercado imobiliário direto são, em geral, significativos no modelo, porém explicam apenas cerca de 15% da volatilidade dos retornos dos fundos da amostra. À luz da Moderna Teoria do Portfólio, esses resultados indicam que a inclusão de fundos imobiliários pode ter potencial diversificador numa carteira multi-ativo, seja aumentando o retorno total de uma carteira formada de ações e títulos de renda fixa, sem acréscimo em risco; ou mantendo o retorno dessa carteira, com diminuição da volatilidade, ampliando assim a fronteira eficiente da carteira. Esse efeito questiona o tradicional equilibrium fund de carteiras de investimentos formadas apenas de ações e renda fixa e aponta os fundos imobiliários como uma alternativa de investimento diversificadora, enquanto classe de ativo única. A análise de subamostras por tipologia indica, porém, que o papel diversificador dos fundos imobiliários está atrelado ao tipo de empreendimento que lastreia esse fundo, uma vez que os fatores explicativos e seus impactos nos retornos diferem de uma tipologia para outra. Esse resultado tem importantes implicações no critério de seleção a ser adotado tanto por investidores para seleção de ativos para uma carteira otimizada, como para gestores de fundos imobiliários na formatação e gestão desses produtos. Conclui-se também que os retornos dos fundos, de certo modo, refletem seu caráter híbrido, mas o modelo decomposto em 4 componentes não é suficiente para explicar os retornos dos fundos imobiliários, uma vez que o modelo estendido, demonstrou que outras variáveis, inclusive parâmetros desses próprios mercados, além de variáveis macroeconômicas e as características de cada fundo (eg. market-to-book, tamanho), podem ser responsáveis por explicar considerável parte da variância dos retornos dos FIIs.