Using passive acoustics and shore based surveys to investigate the use of Lundy Island’s near shore water by small odontocetes

The use of waters around Lundy by dolphins and porpoises was measured using summer shore-based watches and passive acoustic surveillance between July 2011 and July 2012. Common dolphins (Delphinus delphis) were the only cetacean species observed during shore-based surveys. C-PODs moored on the Ethel and MV Robert wrecks close to the Lundy coast showed a peak in delphinid vocal activity during August 2011. Passive acoustic detections of harbour porpoises (Phocoena phocoena) were highest during ebb tidal phases and most often associated with the tidal rip at the south of the island. These findings show tidal and monthly influences on odontocete behaviour and highlight the value of continuous, passive acoustic monitoring for these highly mobile marine predators around Lundy.

The millennial mum: technology use by new mothers

Becoming a mother presents a woman with new challenges and a need to access new sources of information. This work considers the increase in the use of online parenting support as the first group of millennials become parents. Initial results from a survey comparing the use of technology pre and post the experience of childbirth is presented. The survey reveals that mothers are likely to increase the time they spend online and are strongly motivated by seeking social contact. The paper concludes by considering the implications of this survey for healthcare professionals wishing to give information and support through online media and suggests how HCI professionals can become involved in this work.

Use of time-resolved spectroscopy as a method to monitor carotenoids present in tomato extract obtained using ultrasound treatment

Introduction Compounds exhibiting antioxidant activity have received much interest in the food industry because of their potential health benefits. Carotenoids such as lycopene, which in the human diet mainly derives from tomatoes (Solanum lycopersicum), have attracted much attention in this aspect and the study of their extraction, processing and storage procedures is of importance. Optical techniques potentially offer advantageous non-invasive and specific methods to monitor them. Objectives To obtain both fluorescence and Raman information to ascertain if ultrasound assisted extraction from tomato pulp has a detrimental effect on lycopene. Method Use of time-resolved fluorescence spectroscopy to monitor carotenoids in a hexane extract obtained from tomato pulp with application of ultrasound treatment (583 kHz). The resultant spectra were a combination of scattering and fluorescence. Because of their different timescales, decay associated spectra could be used to separate fluorescence and Raman information. This simultaneous acquisition of two complementary techniques was coupled with a very high time-resolution fluorescence lifetime measurement of the lycopene. Results Spectroscopic data showed the presence of phytofluene and chlorophyll in addition to lycopene in the tomato extract. The time-resolved spectral measurement containing both fluorescence and Raman data, coupled with high resolution time-resolved measurements, where a lifetime of ~5 ps was attributed to lycopene, indicated lycopene appeared unaltered by ultrasound treatment. Detrimental changes were, however, observed in both chlorophyll and phytofluene contributions. Conclusion Extracted lycopene appeared unaffected by ultrasound treatment, while other constituents (chlorophyll and phytofluene) were degraded.

Evaluating the use of mobile collaborative augmented reality within field service networks: the case of Océ Italia – Canon Group

The adoption of Augmented Reality (AR) technologies can make the provision of field services to industrial equipment more effective. In these situations, the cost of deploying skilled technicians in geographically dispersed locations must be accurately traded off with the risks of not respecting the service level agreements with the customers. This paper, through the case study of a leading OEM in the production printing industry, presents the challenges that have to be faced in order to favour the adoption of a particular kind of AR named Mobile Collaborative Augmented Reality (MCAR). In particular, this study uses both qualitative and quantitative research. Firstly, a demonstration to show how MCAR can support field service was settled in order to achieve information about the use experience of the people involved. Then, the entire field force of Océ Italia – Canon Group was surveyed in order to investigate quantitatively the technicians’ perceptions about the usefulness and ease of use of MCAR, as well as their intentions to use this technology.

Use of Fibres Obtained from the Cashew (Anacardium ocidentale, L) and Guava (Psidium guayava) Fruits for Enrichment of Food Products

OLIVEIRA, E. L. et al. Use of Fibres obtained from the Cashew (Anacardium ocidentale, L) and Guava (Psidium guayava) Fruits for Enrichment of Food Products. Brazilian Archives of Biology and Technology, Curitiba, PR, v. 48, p. 143-150, 2005.

The use of electronic voting systems to enhance deep learning.

The present paper introduces a technology-enhanced teaching method that promotes deep learning. Four stages that correspond to four different student cohorts were used for its development and to analyse its effectiveness. The effectiveness of the method has been assessed in terms of examination results as well as results obtained from class response system software statistics. The evidence gathered indicates that the method developed is very effective and its implementation is straightforward. Furthermore, its success in achieving results seems to be independent of the skills and/or experience of the lecturer.

Experience with the use of Acrobat in the CAJUN publishing project

Adobe's Acrobat software, released in June 1993, is based around a new Portable Document Format (PDF) which offers the possibility of being able to view and exchange electronic documents, independent of the originating software, across a wide variety of supported hardware platforms (PC, Macintosh, Sun UNIX etc.). The fact that Acrobat's imageable objects are rendered with full use of Level 2 PostScript means that the most demanding requirements can be met in terms of high-quality typography and device-independent colour. These qualities will be very desirable components in future multimedia and hypermedia systems. The current capabilities of Acrobat and PDF are described; in particular the presence of hypertext links, bookmarks, and yellow sticker annotations (in release 1.0) together with article threads and multi-media plugins in version 2.0, This article also describes the CAJUN project (CD-ROM Acrobat Journals Using Networks) which has been investigating the automated placement of PDF hypertextual features from various front-end text processing systems. CAJUN has also been experimenting with the dissemination of PDF over e-mail, via World Wide Web and on CDROM.

Connecting: the use of information and communication technologies by older adults in a retirement community

This is a long-term study of the use of information and communication technologies by 30 older adults (ages 70–97) living in a large retirement community. The study spanned the years of 1996 to 2008, during which time the research participants grappled with the challenges of computer use while aging 12 years. The researcher, herself a ‘mature learner,’ used a qualitative research design which included observations and open-ended interviews. Using a strategy of “intermittent immersion,” she spent an average of two weeks per visit on site and participated in the lives of the research population in numerous ways, including service as their computer tutor. With e-mail and telephone contact, she was able to continue her interactions with participants throughout the 12-year period. A long-term perspective afforded the view of the evolution, devolution or cessation of the technology use by these older adults, and this process is chronicled in detail through five individual “profiles.” Three research questions dominated the inquiry: What function do computers serve in the lives of older adults? Does computer use foster or interfere with social ties? Is social support necessary for success in the face of challenging learning tasks? In answer to the first question, it became clear that computers were valued as a symbol of competence and intelligence. Some individuals brought their computers with them when transferred to the single-room residences of assisted living or nursing care facilities. Even when use had ceased, their computers were displayed to signal that their owners were or had once been keeping up to date. In answer to the second question, computer owners socialized around computing use (with in-person family members or friends) more than, or as much as, they socialized through their computers in the digital realm of the Internet. And in answer to the third question, while the existence of social support did facilitate computer exploration, more important was the social support network generated and developed among fellow computer users.

Use of business analysis in beef businesses to direct management practice change for climate adaptation outcomes

Beef businesses in northern Australia are facing increased pressure to be productive and profitable with challenges such as climate variability and poor financial performance over the past decade. Declining terms of trade, limited recent gains in on-farm productivity, low profit margins under current management systems and current climatic conditions will leave little capacity for businesses to absorb climate change-induced losses. In order to generate a whole-of-business focus towards management change, the Climate Clever Beef project in the Maranoa-Balonne region of Queensland trialled the use of business analysis with beef producers to improve financial literacy, provide a greater understanding of current business performance and initiate changes to current management practices. Demonstration properties were engaged and a systematic approach was used to assess current business performance, evaluate impacts of management changes on the business and to trial practices and promote successful outcomes to the wider industry. Focus was concentrated on improving financial literacy skills, understanding the business’ key performance indicators and modifying practices to improve both business productivity and profitability. To best achieve the desired outcomes, several extension models were employed: the ‘group facilitation/empowerment model’, the ‘individual consultant/mentor model’ and the ‘technology development model’. Providing producers with a whole-of-business approach and using business analysis in conjunction with on-farm trials and various extension methods proved to be a successful way to encourage producers in the region to adopt new practices into their business, in the areas of greatest impact. The areas targeted for development within businesses generally led to improvements in animal performance and grazing land management further improving the prospects for climate resilience.

CATEGORIZATION OF BRAZILIAN INTERNET USERS AND ITS IMPACTS ON THE USE OF ELECTRONIC GOVERNMENT SERVICES

This paper aims to categorize Brazilian Internet users according to the diversity of their online activities and to assess the propensity of these Internet users´ groups to use electronic government (e-gov) services. The Amartya Sen’s Capability Approach was adopted as the theoretical framework for its consideration of people’s freedom to decide on their use of available resources and their competencies for these decisions, leading to the use of e-gov services. Multivariate statistical techniques were used to perform data analysis from the 2007, 2009 and 2011 editions of ICT Household Survey. The results showed that Internet users belonging to the advanced and intermediate use groups were more likely to use e-gov services than those who belong to the sporadic use group. Moreover, the results also demonstrated that the Internet user group of intermediate use presented a higher tendency to use e-gov services than the Internet user group of advanced use. This tendency is possibly related to the extensive use of interactive and collaborative activities of leisure and entertainment performed by this type of user. The findings of this research may be useful in guiding public policies for the dissemination and provision of electronic government services in Brazil.

Participation Space Studies: a socio-technical exploration of activist and community groups’ use of online and offline spaces to support their work

Participation Space Studies explore eParticipation in the day-to-day activities of local, citizen-led groups, working to improve their communities. The focus is the relationship between activities and contexts. The concept of a participation space is introduced in order to reify online and offline contexts where people participate in democracy. Participation spaces include websites, blogs, email, social media presences, paper media, and physical spaces. They are understood as sociotechnical systems: assemblages of heterogeneous elements, with relevant histories and trajectories of development and use. This approach enables the parallel study of diverse spaces, on and offline. Participation spaces are investigated within three case studies, centred on interviews and participant observation. Each case concerns a community or activist group, in Scotland. The participation spaces are then modelled using a Socio-Technical Interaction Network (STIN) framework (Kling, McKim and King, 2003). The participation space concept effectively supports the parallel investigation of the diverse social and technical contexts of grassroots democracy and the relationship between the case-study groups and the technologies they use to support their work. Participants’ democratic participation is supported by online technologies, especially email, and they create online communities and networks around their goals. The studies illustrate the mutual shaping relationship between technology and democracy. Participants’ choice of technologies can be understood in spatial terms: boundaries, inhabitants, access, ownership, and cost. Participation spaces and infrastructures are used together and shared with other groups. Non-public online spaces, such as Facebook groups, are vital contexts for eParticipation; further, the majority of participants’ work is non-public, on and offline. It is informational, potentially invisible, work that supports public outputs. The groups involve people and influence events through emotional and symbolic impact, as well as rational argument. Images are powerful vehicles for this and digital images become an increasingly evident and important feature of participation spaces throughout the consecutively conducted case studies. Collaboration of diverse people via social media indicates that these spaces could be understood as boundary objects (Star and Griesemer, 1989). The Participation Space Studies draw from and contribute to eParticipation, social informatics, mediation, social shaping studies, and ethnographic studies of Internet use.

Investigating the use of LiDAR scanning as a method for the measurement of timber distortion features

Measuring the extent to which a piece of structural timber has distorted at a macroscopic scale is fundamental to assessing its viability as a structural component. From the sawmill to the construction site, as structural timber dries, distortion can render it unsuitable for its intended purposes. This rejection of unusable timber is a considerable source of waste to the timber industry and the wider construction sector. As such, ensuring accurate measurement of distortion is a key step in addressing ineffciencies within timber processing. Currently, the FRITS frame method is the established approach used to gain an understanding of timber surface profile. The method, while reliable, is dependent upon relatively few measurements taken across a limited area of the overall surface, with a great deal of interpolation required. Further, the process is unavoidably slow and cumbersome, the immobile scanning equipment limiting where and when measurements can be taken and constricting the process as a whole. This thesis seeks to introduce LiDAR scanning as a new, alternative approach to distortion feature measurement. In its infancy as a measurement technique within timber research, the practicalities of using LiDAR scanning as a measurement method are herein demonstrated, exploiting many of the advantages the technology has over current approaches. LiDAR scanning creates a much more comprehensive image of a timber surface, generating input data multiple magnitudes larger than that of the FRITS frame. Set-up and scanning time for LiDAR is also much quicker and more flexible than existing methods. With LiDAR scanning the measurement process is freed from many of the constraints of the FRITS frame and can be done in almost any environment. For this thesis, surface scans were carried out on seven Sitka spruce samples of dimensions 48.5x102x3000mm using both the FRITS frame and LiDAR scanner. The samples used presented marked levels of distortion and were relatively free from knots. A computational measurement model was created to extract feature measurements from the raw LiDAR data, enabling an assessment of each piece of timber to be carried out in accordance with existing standards. Assessment of distortion features focused primarily on the measurement of twist due to its strong prevalence in spruce and the considerable concern it generates within the construction industry. Additional measurements of surface inclination and bow were also made with each method to further establish LiDAR's credentials as a viable alternative. Overall, feature measurements as generated by the new LiDAR method compared well with those of the established FRITS method. From these investigations recommendations were made to address inadequacies within existing measurement standards, namely their reliance on generalised and interpretative descriptions of distortion. The potential for further uses of LiDAR scanning within timber researches was also discussed.

Theses on water resources: Stanford University, California Institute of Technology, and University of Southern California.

Mode of access: Internet.