956 resultados para Two-Way Fingerprint
Resumo:
OBJETIVO: Testar os efeitos de uma dieta com baixo teor de gordura comparada a uma dieta com gordura de babaçu sobre o estado nutricional em ratos jovens com colestase obstrutiva. MÉTODOS: Submetemos 40 ratos divididos em quatro grupos de 10 animais a partir do P21 (21º dia pós-natal) até o P49 a dois dos seguintes tratamentos: ligadura e ressecção do ducto biliar comum ou operação simulada e dieta com baixo teor de gordura (óleo de milho fornecendo 4,5% da quantidade total de calorias) ou dieta com gordura de babaçu (essa gordura fornecendo 32,7% e óleo de milho fornecendo 1,7% da quantidade total de calorias). Foi mensurado o ganho de peso a cada 4 dias do P25 ao P49. A função de crescimento de Verhulst foi ajustada aos valores de ganho de peso. A velocidade e a aceleração de crescimento nos mesmos momentos foram estimadas usando a mesma equação. Foram mensurados: quantidade de ração ingerida e ingestão energética total do P21 ao P49, utilização de energia do P25 ao P49, gordura absorvida e balanço de nitrogênio (BN) do P42 ao P49. A ANOVA com dois fatores e o método de S.N.K para comparações pareadas foram utilizados para estudar os efeitos, sobre as variáveis, da colestase e das dietas e sua interação (p<0,05). RESULTADOS: em ratos com colestase e dieta com baixo teor de gordura, houve maior velocidade de crescimento no P45, maior aceleração de crescimento no P41 e P45, maior utilização de energia, maior percentual de gordura absorvida e maior BN do que em ratos com colestase e dieta com gordura de babaçu. CONCLUSÃO: A dieta com baixo teor de gordura atenua a restrição de crescimento provocada pela colestase e proporciona melhor aproveitamento da dieta e maior incorporação da proteína ingerida do que a dieta com gordura de babaçu.
Resumo:
Objective: To test whether ascorbic acid supplementation has any cytoprotective effect on a model of secondary biliary cirrhosis in young rats.Methods: We studied 40 Wistar rats weaned at the 21st postnatal day. Each group of 10 was subjected to one of the following four treatments, until 49th postnatal day, when they suffered euthanasia: 1) LC-double ligature and resection of the common bile duct and daily administration of ascorbic acid [100 mg/g of body weight (bw)]; 2) LA-double ligature and resection of the common bile duct and daily administration of aqueous vehicle (1 mL/g bw); 3) SC-sham operation and daily administration of ascorbic acid (100 mg/g bw); 4) SA-double ligature and resection of the common bile duct and daily administration of aqueous vehicle (1 mL/g bw). The rats were weighed daily. on the 27th day after the operation they received an intra-peritoneal injection of 1.5 mg/g bw of sodium pentobarbital, and the pentobarbital sleeping time was measured. Blood was collected for serum alanine aminotransferase and aspartate aminotransferase activity measurements, serum albumin and globulin concentrations, and the liver was assessed for liver water and fat content. Data were submitted to two-way ANOVA and paired comparisons between groups were tested using the SNK method. Significance level was set at 0.05.Results: Ascorbic acid supplementation attenuated the effects of cholestasis: decreased the pentobarbital sleeping time, serum globulin, and the liver fat content.Conclusions: Our results corroborate the hypothesis that ascorbic acid supplementation has a cytoprotective effect in secondary biliary cirrhosis.
Resumo:
OBJETIVO: Testar os efeitos do extrato aquoso de Coleus barbatus (EAB) na cirrose biliar secundária por obstrução das vias biliares extra-hepáticas em ratos jovens. MÉTODOS: Quarenta ratos Wistar machos com 21 dias de vida (P21), foram distribuídos em quatro grupos de 10 animais, submetidos a operação simulada ou dupla ligadura e ressecção do ducto biliar (S ou L) combinados EAB e a Água (B ou A). No P48, foi medido o tempo de sono com o pentobarbital (TS). No P49, foram submetidos a eutanásia para a determinação das atividades séricas do aspartato aminotransferase (AST) e da alanina aminotransferases (ALT); após a eutanásia foram avaliados o peso fresco do fígado (PFF) e, em cortes histológicos do fígado, a freqüência de mitoses (FM), o número de áreas de necrose (NN), a intensidade da fibrose (IF) e da proliferação ductal (IPD). Os efeitos da colestase, os do EAB e suas interações foram testados pela ANOVA com dois fatores, e as comparações múltiplas pareadas foram realizadas pelo teste de S.N.K ou teste de Wilcoxon. Também foi determinada a correlação linear de Pearson entre as variáveis histológicas duas a duas separadamente para os grupos LA e LD. O nível de significância estatística para os vários testes foi de p do erro alfa <0,05. RESULTADOS: A colestase aumentou significativamente o TS, a ALT, a AST, o PFF, a MI, o NN, a IF e a IPD. O EAB diminuiu o TS e a IM nos animais sem colestase (operação simulada). O EAB diminuiu o TS, a ALT, a AST, o PFF, a MI, o NN e IF na colestase. No grupo LA houve correlação positiva entre a IPD e a IF, correlação negativa entre a IPD e a FM e correlação negativa entre a IF a FM. No grupo LD houve correlação negativa entre o NN e a IPD. CONCLUSÕES: Na ausência de colestase o EAB encurta o tempo de sono e diminui a freqüência de mitoses. O EAB apresenta efeito hepatoprotetor no modelo de cirrose biliar secundária a obstrução biliar extra-hepática.
Resumo:
OBJETIVO: Testar o efeito hepatoprotetor do extrato aquoso de Bidens pilosa L. (EBP) na doença hepática induzida pela ligadura e ressecção do ducto biliar comum (LRDBC) em ratos jovens. MÉTODOS: Estudamos ratos Wistar com 21º. dia de vida (P21) divididos em quatro grupos de 10 animais, Grupo SA: operação simulada e água; Grupo SD: operação simulada e EBP (160mg de folhas frescas/100g de peso corporal/dia); Grupo LA: LRDBC e água e Grupo LD: LRDBC e EBP diariamente. O tempo de sono por pentobarbital (TSP), aspartato (AST) e alanina (ALT) aminotransferase foram determinadas após o sacrifício (P70). O Score de Ruwart (SR) para fibrose hepática foi atribuído para cada animal. Foi realizada análise de variância com dois fatores e pelo teste de Tukey para comparações múltiplas ou por teste não paramétrico. RESULTADOS: Houve diferença estatisticamente significativa entre LA e LD nas variáveis: TSP (médias LA=390; LD=173), AST (médias LA=8, LD=5), ALT (medianas LA=2; LD=1) e SR (medianas LA=2; LD=1). CONCLUSÃO: EBP poderá ser empregado na fitoterapia da doença hepática induzida pela colestase obstrutiva crônica, pois protege a função hepática, diminui a velocidade de necrose e a intensidade da fibrose hepática na obstrução biliar extra-hepática.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Com o objetivo de investigar alguns aspectos relacionados à transferência de imunidade passiva em bovinos de corte, foram selecionados 90 bezerros aparentemente sadios, 45 da raça Nelore e 45 da raça Limousin, distribuídos em 3 grupos (com 15 bezerros cada) de acordo com o número de parições de suas mães: primeira cria; segunda cria; e terceira ou mais crias. Amostras de sangue foram colhidas de cada bezerro entre 24 e 36 horas de vida e com 15, 30, 60, 90 e 120 dias. Determinaram-se as concentrações de proteína total no soro (PT) e no plasma (PPT), a atividade sérica da gamaglutamiltransferase (GGT), e as concentrações séricas de albumina, alfa, beta e gamaglobulinas por eletroforese em gel de agarose e de IgG estimada por meio do método de turvação pelo sulfato de zinco. Empregou-se a análise de variância bifatorial para as variáveis mensuradas na primeira colheita. O comportamento das variáveis em função da idade foi estudado por meio da análise de variância de medidas repetidas. Correlações foram estabelecidas entre as variáveis. A transferência de imunidade passiva foi bem sucedida nos bezerros de ambas as raças e o número de parições das mães não interferiu no processo. As concentrações mais elevadas de gamaglobulinas ao término do primeiro dia de vida declinaram até valores mínimos aos 60 dias. A partir dessa idade, a elevação conseqüente à produção ativa de anticorpos foi mais precoce nos bezerros taurinos e mais lenta nos zebuínos. A gamaglobulina, ao término do primeiro dia de vida, correlacionou-se com as seguintes variáveis: IgG (r=0,859), PPT (r=0,807), PT (r=0,811) e GGT (r=0,399). O fator etário exerceu efeito sobre todas as variáveis mensuradas. As variações das proteínas séricas obedeceram a um padrão de comportamento fisiológico ao longo dos quatro primeiros meses de vida, de forma geral, não distinto em taurinos e zebuínos.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Purpose: The aim of this study was to evaluate the effect of mechanical cycling and different misfit levels on Vicker's microhardness of retention screws for single implant-supported prostheses.Materials and Methods: Premachined UCLA abutments were cast with cobalt-chromium alloy to obtain 48 crowns divided into four groups (n = 12). The crowns presented no misfit in group A (control group) and unilateral misfits of 50 mu m, 100 mu m, and 200 mu m in groups B, C, and D, respectively. The crowns were screwed to external hexagon implants with titanium retention screws (torque of 30 N/cm), and the sets were submitted to three different periods of mechanical cycling: 2 x 10(4), 5 x 10(4), and 1 x 10(6) cycles. Screw microhardness values were measured before and after each cycling period. Data were evaluated by two-way ANOVA and Tukey's test (p < 0.05).Results: Mechanical cycling statistically reduced microhardness values of retention screws regardless of cycling periods and groups. In groups A, B, and C, initial microhardness values were statistically different from final microhardness values (p < 0.05). There was no statistically significant difference for initial screw microhardness values (p > 0.05) among the groups; however, when the groups were compared after mechanical cycling, a statistically significant difference was observed between groups B and D (p < 0.05).Conclusions: Mechanical cycling reduced the Vicker's microhardness values of the retention screws of all groups. The crowns with the highest misfit level presented the highest Vicker's microhardness values.
Resumo:
objective: This in vitro study aimed to analyse the protective effect of differently concentrated titanium (TiF4), zirconium (ZrF4) and hafnium (HfF4) tetrafluoride on enamel erosion. Methods: Polished enamel surfaces of 36 bovine crowns were covered with tape leaving 4 enamel windows each 3 mm in diameter exposed. The crowns were randomly assigned to six groups (each n = 6) and pretreated with 4% TiF4, 10% TiF4, 4% ZrF4, 10% ZrF4, 4% HfF4 or 10% HfF4 for 4 min (first window), 10 min (second window) or 15 min (third window). The fourth window of each crown was not pretreated and served as control. Erosion was performed stepwise with 1% HCl (pH 2) in five consecutive intervals of each 15 s (total 75 s). Enamel dissolution was quantified by colorimetric determination of phosphate release into the acid. For each tooth, cumulative phosphate loss of enamel pretreated with one of the tetrafluoride compounds was calculated as percentage of the respective control and statistically analysed using two-way ANOVA.Results: Enamel erosion was significantly reduced by TiF4, ZrF4 and HfF4 application. Cumulative phosphate loss (mean % of control, 75 s erosion) after 4-15 min application was significantly lower for 4% ZrF4 (7-11%), 10% ZrF4 (2-6%), 4% HfF4 (11-9%) and 10% HfF4 (12-16%) compared to 4% TiF4 (42-27%) and 10% TiF4 (54-33%). Only for 4% and 10% TiF4, phosphate loss decreased with increasing duration of application, but also increased with increasing acid intervals.Conclusion: TiF4, ZrF4 and HfF4 might protect enamel against short-time erosion, but protection was more enhanced by ZrF4 and HfF4 compared to TiF4 application overtime. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: This in situ study evaluated the effect of an erosive challenge on different restorative materials and on enamel restored with these materials, as well as the ability of these materials to protect the adjacent enamel against erosion.Methods: Ten volunteers wore palatal devices with eight bovine enamel blocks, randomly selected and distributed into two vertical rows, corresponding to the following groups: GI/GV, resin-modified glass ionomer; GII/GVI, conventional glass ionomer; GIII/GVII, composite resin; GIV/GVIII, amalgam. one row (corresponding to groups I-IV) was immersed in a cola drink and the other row (corresponding to groups V-VIII) was subjected to saliva only. The palatal device was continuously worn for 7 days and only half of the appliance (groups I-IV) was immersed in the soft drink (Coca-Cola (R), 150 mL) for 5 min, three times a day. The study variables comprised the wear (profilometry, mu m) and the percentage of surface microhardness change (%SMHC). Data were tested for significant differences by two-way ANOVA and Tukey's tests (p < 0.05).Results: Considering the restorative materials, for %SMHC and wear, there were no differences among the materials and between the saliva and the erosive challenge. For enamel analyses, the erosive challenge promoted a higher wear and %SMHC of the enamel than did the saliva. There were no significant differences in wear and %SMHC of the enamel adjacent to the different restorative materials.Conclusion: This research data suggest that there is little %SMHC and wear of the studied restorative materials and none of them had a preventive effect against erosion on adjacent enamel, which showed a pronounced wear. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This study evaluated the finishing and polishing effect on the surface roughness and hardness of the Filtek Supreme XT, in fluoride solutions. Specimens were prepared (n = 140) with half of the samples finished and polished with Super-Snap (R) disks. The experimental groups were divided according to the presence or absence of finishing and polishing and immersion solutions (artificial saliva, sodium fluoride solution at 0.05%-manipulated, Fluordent Reach, Oral B, Fluorgard). The specimens remained immersed in artificial saliva for 24 hours and were then subjected to initial analysis (baseline) of surface roughness and Vickers microhardness. Next, they were immersed in different fluoride solutions for 1 min/day, for 60 days. Afterwards, a new surface roughness and microhardness reading was conducted. The data were submitted to a two-way ANOVA and Tukey's test (5% significance level). For the comparison of mean roughness and hardness at baseline and after 60 days, the paired Student t test was used. The results showed that the surface roughness and microhardness of the Filtek Supreme XT were influenced by the finishing and polishing procedure, independently of the immersion methods.
Resumo:
Objective: This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Material and Methods: Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke (R) and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37 +/- 1 degrees C, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). Results: High-power-density LED (Delta E=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus - Delta E=2.05; XL 3000 - Delta E=2.28). Coffee (Delta E=8.40; Delta L=-5.21) showed the highest influence on color stability of the studied composite resin. Conclusion: There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.