Desempenho zootécnico da tilápia tailandesa, linhagem Chitralada, em tanques-rede no Reservatório de Nova Avanhandava, B uritama, SP: modelo empírico de classificação e repicagem

Pós-graduação em Aquicultura - FCAV

Pesque-solte: pesca repetitiva, variáveis hematológicas e parasitismo no peixe híbrido tambacu

The objective of this work was to evaluate the hematological and parasitological responses of tambacu (Colossoma macropomum x Piaractus mesopotamicus) subjected to catch-and-release stress and to different stocking densities in a catch-and-release system. Two hundred and ten fish with mean initial weight of 785.33±152.02 g and mean total length of 34.43±2.21 cm were maintained in ponds and divided into three groups: without fishing and low density (G1), with fishing and low density (G2), and with fishing and high density (G3). No significant differences were observed between the mean values for hemoglobin concentration, erythrocyte number, differential counting of leukocytes, and glucose. The fish from the G3 group showed higher parasite and thrombocyte numbers, and lower weight gain and hematocrit. The activity of catch-and-release, associated with high stocking density, can disrupt organic balance and animal performance, favoring parasitosis.

Parasitofauna de cachara cultivado em tanque-rede no rio Paraguai

The objective of this work was to describe the parasitic fauna of cachara (Pseudoplatystoma reticulatum) cultured in a net-cage in the Paraguai River, Brazil. Ten fish with mean weight of 598.0±81.3 g and total length of 38.6±1.6 cm were examined. All necropsied fish were parasitized by at least two species. Among them, Ichthyophthirius multifiliis (Ciliophora), Myxobolus sp. and Henneguya sp. (Myxozoa), Monogenoidea, Choanoscolex abscissus and Nominoscolex sudobim (Cestoda), Dolops carvalhoi (Crustacea), and Digenea were diagnosed. The protozoan Ichthyophthirius multifiliis was the most prevalent parasite.

Single Nucleotide Variations in the Buffalo Kappa-Casein Gene (CSN3)

Caseins are the major milk proteins associated with lactation performance, milk composition and cheese yield efficiency, representing around 80% of the total amount of proteins found in milk. Among the caseins, kappa-casein is the protein that stabilizes micelle structure during milk coagulation process and being used during the cheese production. The kappa-casein gene (CSN3) has been previously mapped to buffalo chromosome 7 using a radiation hybrid panel and a comparative map was established using the sequence from bovine chromosome 6. The molecular structure of this gene has also been established in river buffalo, with a total length of 13,191 bp (GenBank: AM900443.1) and containing five exons. In this study we searched for single nucleotide variations in specific regions of the CSN3 gene in three animals representing the Murrah breed. Sequencing reactions were performed using ABI3730xl sequencer. The primer walking method was used to span the 5'-UTR and intron 2 regions of the gene, for which ten primer pairs were designed using Oligo 6 software. BLAST tool was used to verify the primers specificity. DNA sequences assemblies from all three animals were performed with Sequencher (R) software 4.1, while multiple alignments were performed using Clustal W software to identify single nucleotide variations. The sequencing revealed a total of 19 single nucleotide variations with 13 located in the upstream regulatory region of the gene (5'-UTR) and six on intron 2. These variations can be validated using commercial populations segregating specific economic traits.

Características morfométricas, rendimentos no processamento e composição centesimal da carne do barbado

This study was carried out to evaluate the morphometric characteristics, the yield and the centesimal composition of different cuts of the Barbado's (Pinirampus pirinampu) flesh, captured in the Itaipu Reservoir. Were used 55 animals randomly distributed into three classes of body weight [less than 620 g (n = 15), between 620 and 1.120 g (n = 16) and greater than de 1.120 g (n = 24)]. Were measured the standard length (SL), the total length (TL), the head length (HL), the head height (HH), the trunk length (TRL), the trunk height (TH) and width of the trunk (WT). Then were established the morphometric relationships: (HL/SL), (HL/HH), (SL/TL), (WT/TRL), (WT/TH) (TH/TRL). Afterwards were measured the flesh's cut yield and the residue waste yield called: trunk (TC), fillet (FILLET), abdominal fillet (AF), head (HEAD), viscera (VISC), fin, spine and skin (SKSF). The levels of moisture, ash, fat and crude protein from FILLET and AF were determined. The body weight affected (P<0.05) the WT/TRL, WT/TH, TH/TRL, TR, FILLET, HEAD and SKSF, however didn't affected the centesimal parameters. In conclusion, the Barbado (Pinirampus pirinampu) has allometric growth and the flesh processing from fishes with more than 620 g provides better yields of edible parts. In addition, the chemical composition of meat suggests its potential for use in the manufacture of artisanal or industrial products.

Germinação de sementes de romäzeiras (Punica granatum L.) de acordo com a concentração de giberelina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new tuning fork with different vibration frequencies as an aid to bronchopulmonary hygiene physiotherapy

Background: The main function of the mucociliary system is the removal of particles or substances that are potentially harmful to the respiratory tract. The tuning fork therapeutic for the purpose of bronchial hygiene has still not been described in the literature. The optimal vibration frequency to mobilize secretions is widely debated and varies between 3 and 25 Hz. It is expected that a tuning fork is able to generate vibrations in the thorax, facilitating bronchial hygiene. The aim of the present study is to develop tuning forks with different frequencies, for use in bronchopulmonary hygiene therapy. Methods: The first tuning fork was made with a fixed frequency of 25 Hz and it was recorded in the Brazilian institution of patent registration. This device generated a frequency of 25 Hz and had a weight of 521 g, with dimensions of 600 mm in total length. The device is characterized by a bottom end containing a transducer with a diameter of 62 mm and a thickness of 5/16 mm (8''), a rod removable 148 mm, fork length of 362 mm and an extension at the upper end of sinuous shape bilaterally.The tuning forks must be applied at an angle of 90° directly on the chest wall of the patient after pulmonary auscultation for location of secretions. The tuning fork is activated by squeezing the tips of the extensions together and releasing them in a sudden movement. Results: This study shows the result of the development of others three tuning forks of different dimensions to generate different frequencies. Each equipment reaches a fixed frequency preset of 12, 15 and 20 Hz measured by digital oscilloscope. Conclusions: The tuning fork models developed in this study generated different frequencies proposed by the scientific literature as effective in the mobilization of pulmonary secretions.

Ecological aspects and sexual maturity of a southwestern Atlantic population of the planktonic shrimp Lucifer faxoni (Decapoda: Sergestoidea)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of thermo-mechanical load cycling on silorane-based composite restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação das dimensões e relacionamento dos arcos dentários após tratamento com Bionator de Balters

The deficiency of data in the literature took us to evaluate the Bionator of Balters appliance in the alterations of the dimensions and the relationship of the dental archs in children with malocclusion Class II, division 1 of Angle. The experimental group was constituted by 36 pairs cast Caucasians patients, aged between 7 years and 10 months - 11 years and 8 months, being 10 females and 8 males. The Levene´s test showed statistical evidences of likeness among the groups. Statistical analysis was preceded and showed significant alterations (p < 0,005) in the variable indicatives of maxillary first molars' distance, overjet, upper arch total length, upper arch anterior length, right molar relationship, left molar relationship, right canine relationship and left canine relationship. On the other hand, there wasn't significant alteration related to the lower arch and maxillary intercanines distance. The Balters' Bionator appliance had a favorable effect in the improvement of the correction of the malocclusion in Class II (foremost in molars and canines relationship) and transversal increase of the upper arch, mainly in the posterior area of arch.

Effect of prey concentrations and feed training on production of Hoplias lacerdae juvenile

The aim of this work was to investigate the s of daily prey concentration during the first 15 days of active feeding of Hoplias lacerdae larvae, and the juvenile size on the feed training. In the first phase, the larvae received five Artemia nauplii concentrations (P). In the second phase, the juveniles from each treatment were trained to accept formulated diet. Superior growth was related to higher initial daily prey concentrations (900 and 1100 nauplii larvae-1). During feed training, the growth tendency was similar to that verified in the first phase. The lowest values of specific growth rate (SGR) were registered after the introduction of the semi-moist diet used in the feed training. However, the values of SGR recovered along the experiment and similar rates were found among the treatments. Survival, mortality and cannibalism were similar in the different treatments at the end of both phases. It can be concluded that: the prey concentration affects growth of H. lacerdae during the first 15 days of active feeding, and feed training can be initialized with juveniles of about 16 mm of total length.

Alimentação alternativa de frangos tipo colonial com resíduo agroindustrial de fruta

Pós-graduação em Ciência Animal - FMVA

A new species of Amerotyphlops from Northeastern Brazil, with comments on distribution of related species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Slipper lobsters (Scyllaridae) off the southeastern coast of Brazil: relative growth, population structure, and reproductive biology

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Early development of Betta splendens under stereomicroscopy and scanning electron microscopy

Betta splendens is a very important ornamental species. The current paper describes the embryonic and larval development of B. splendens under stereomicroscopy and scanning electron microscopy. Eggs and larvae from natural spawning were collected at different developmental stages at previously established intervals and analysed. The eggs of B. splendens are yellowish, clear, spherical, demersal, translucent and telolecithal with a large amount of yolk. Between 0-2 h post-initial collection (hpIC), the eggs were at the egg cell, first cleavage and morula stages. The blastula stage was identified at 2-3 hpIC and the early gastrula phase was observed at 3-4 hpIC with 20% epiboly, which was finalized after 13-18 hpIC. When the pre-larvae were ready to hatch, the appearance of somites and the free tail were observed, at 23-25 hpIC. At 29 hpIC, the majority of larvae had already hatched at an average temperature of 28.4 +/- 0.2 degrees C. The newly hatched larvae measured 2.47 +/- 0.044 mm total length. The mouth opened at 23 h post-hatching (hPH) and the yolk sac was totally absorbed at 73 hPH. After 156 hPH, the heart was pumping blood throughout the entire larval body. The caudal fin, operculum and eyes were well developed at 264 hPH. When metamorphosis was complete at 768 hPH, the larvae became juveniles. The current study presents the first results about early development of B. splendens and provides relevant information for its reproduction, rearing and biology.