Acute exposure to lead increases myocardial contractility independent of hypertension development

We studied the effects of the acute administration of small doses of lead over time on hemodynamic parameters in anesthetized rats to determine if myocardial contractility changes are dependent or not on the development of hypertension. Male Wistar rats received 320 µg/kg lead acetateiv once, and their hemodynamic parameters were measured for 2 h. Cardiac contractility was evaluated in vitro using left ventricular papillary muscles as were Na+,K+-ATPase and myosin Ca2+-ATPase activities. Lead increased left- (control: 112 ± 3.7 vs lead: 129 ± 3.2 mmHg) and right-ventricular systolic pressures (control: 28 ± 1.2vs lead: 34 ± 1.2 mmHg) significantly without modifying heart rate. Papillary muscles were exposed to 8 µM lead acetate and evaluated 60 min later. Isometric contractions increased (control: 0.546 ± 0.07 vs lead: 0.608 ± 0.06 g/mg) and time to peak tension decreased (control: 268 ± 13vs lead: 227 ± 5.58 ms), but relaxation time was unchanged. Post-pause potentiation was similar between groups (n = 6 per group), suggesting no change in sarcoplasmic reticulum activity, evaluated indirectly by this protocol. After 1-h exposure to lead acetate, the papillary muscles became hyperactive in response to a β-adrenergic agonist (10 µM isoproterenol). In addition, post-rest contractions decreased, suggesting a reduction in sarcolemmal calcium influx. The heart samples treated with 8 µM lead acetate presented increased Na+,K+-ATPase (approximately 140%, P < 0.05 for control vs lead) and myosin ATPase (approximately 30%, P < 0.05 for control vs lead) activity. Our results indicated that acute exposure to low lead concentrations produces direct positive inotropic and lusitropic effects on myocardial contractility and increases the right and left ventricular systolic pressure, thus potentially contributing to the early development of hypertension.

An investigation into the physical and psychological stress factors that elementary teachers experience : recommendations to boards and personal calming strategies /

The prlmaiy objective of this study was to Identify and describe the physical and psychological stress factors that elementary school teachers experience and how teachers cope with stress. A secondary objective was to offer boards and teachers potential coping strategies counteracting stress and the effects of stress. The sample consisted of 120 elementaiy teachers from southern Ontario. Ten elementaiy schools were randomly chosen. The Teacher Stress Inventory questionnaire (Flmian, 1989) was used. Data were analyzed using a variety of statistics. Test norms and interpretations were performed based on standard results obtained from the author of the questionnaire (Flmian, 1988). Overall, the results indicated that work-related stressors were the main factor for teacher stress. This Included such factors as caseload/class is too big, too much administrative paperwork, and having little time to prepare lessons. Implications for further research and practical suggestions for further reseairch are discussed. Also a variety of recommendations to boards and for individual use are discussed. Some recommendations are having counselling available for teachers, workshops on how to handle stress, and learning how to breathe and using calm visualization.

Letter to S.D. Woodruff from Burton and Bro.

Letter (1 ½ pages) to S.D. Woodruff from Burton and Bro. saying that the best time to see the trees that are suitable for timber is spring. They say that they will send a statement as soon as they receive the specifications, Apr. 2, 1878.

The contribution of skate blade properties to skating speed

The purpose of the study was to investigate the relative contribution of skate blade properties to on-ice skating speed. Thirty-two male ice hockey players (mean age = 19±2.65 yrs.) representing the Ontario Minor Hockey Association (OMHA; Midget AAA and Junior), Canadian Inter University Sport (CIS: Varsity), Ontario hockey league (OHL) and East Coast Hockey League (ECHL), and the playing positions of forwards (n=18) and defense (n=14) were recruited to participate. Skate related equipment worn by the players for the purpose of the research was documented and revealed that 80% of the players wore Bauer skates, Tuuk blade holders and LS2 skate blades. Subjects completed a battery of eight on-ice skating drills used to measure and compare two aspects of skating speed; acceleration [T1(s)] and total time to complete each drill [TT(s)] while skating on three skate blade conditions. The drills represented skills used in the game of hockey, both in isolation (e.g., forward skating, backward skating, stops and starts, and cornering) and in sequence to simulate the combination of skills used in a shift of game play. The three blade conditions consisted of (i) baseline, represented by the blades worn by the player throughout their current season of play; (ii) experimental blades (EB), represented by brand name experimental blades with manufacturers radius of contour and a standardized radius of hollow; and (iii) customized experimental blades (CEB), represented by the same brand name experimental blades sharpened to the players’ preference as identified in the baseline condition. No significant differences were found in acceleration time [T1(s)] or total time to complete [TT(s)] the isolated drills across blade conditions; however significant differences were revealed in both T1(s) and TT(s) measured during the execution of the sequenced drill across blade conditions. A iii Bonferroni post hoc test revealed that players skated significantly faster when skating on the CEB condition compared to the baseline condition (p≤.05). A questionnaire assessing subjects perceived comfort, confidence and effort expended while skating on the experimental blades revealed that players were significantly more comfortable when skating on the CEB versus the EB condition (p≤.05). Outcomes of the study provide evidence to suggest that the experimental skate blades customized with the players preferred blade sharpening characteristics results in faster skating speed in a combination drill representing skills performed in gameplay.

Letter to the Welland Canal Office from Welland Woodruff, Government Director of the Welland Canal Company

Letter to the Welland Canal Office from Welland Woodruff, Government Director of the Welland Canal Company in which he dissents from giving an extension of time to the St. Catharines Water Power Company to extend the lease of water from this time. This is a copy of the original, March 11, 1837.

Letter to H.H. Collier of St. Catharines from his sister Jane H. Collier Loucks from La Fayette, Iowa

Letter to H.H. Collier of St. Catharines from his sister Jane H. Collier Loucks from La Fayette, Iowa (1 ½ pages, handwritten) regarding raising crops, building a house, purchasing livestock and a description of the land and town. The original letter is very faded to the point of illegibility but it has been photocopied and someone has taken the time to transcribe the letter in its entirety (1 ½ pages, handwritten), July 30, 1855.

Dissuasion, sécurité routière et inférence causale : le cas des actions policières contre la délinquance routière

Objectifs. L’objectif de ce mémoire est de parfaire nos connaissances quant à l’effet des actions policières sur les collisions routières au Québec. Ultimement, ce mémoire permettra d’identifier les conditions nécessaires pour que l’action policière influe sur les comportements des automobilistes. Pour se faire, deux études de cas sont employées. Dans un premier temps, nous évaluons l’effet d’un relâchement d’environ 60 % dans l’émission de constats d’infraction par les policiers de la ville de Québec sur les collisions avec blessures. Dans cet article, nous distinguons également les effets respectifs des constats d’infraction, des interceptions policières sans constat et des médias. Dans un second temps, nous évaluons l’impact d’une stratégie de sécurité routière mise en place conjointement par l’Association des directeurs de police du Québec (ADPQ) et la Société de l’assurance automobile du Québec (SAAQ). Dans les deux cas, un changement important est survenu dans l’émission de constats d’infraction émis en vertu du Code de la sécurité routière (CSR). Méthodologie. Afin d’évaluer l’effet de ces deux stratégies, nous avons agrégé les données sur les collisions et infractions au CSR sur une base mensuelle. Ces données proviennent principalement des rapports de collisions et des constats d’infraction remplis par les policiers et transmis à la SAAQ. Dans l’ensemble, nous avons utilisé un devis quasi-expérimental, soit celui des séries chronologiques interrompues. Résultats. Les résultats des deux articles démontrent que les policiers sont des acteurs clés en matière de sécurité routière. Les collisions avec blessures sont affectées par les fluctuations de leurs activités. La première série d’analyses établit qu’un relâchement d’environ 60 % dans le nombre de constats émis par les policiers se traduit par une hausse d’environ 10 % des collisions avec blessures, ce qui correspond à 15 collisions avec blessures supplémentaires par mois sur le territoire du Service de police de la ville de Québec. De plus, nos résultats montrent qu’une interception policière suivie d’un avertissement verbal n’est pas suffisante pour prévenir les collisions. De même, l’effet observé n’est pas attribuable aux médias. La deuxième série d’analyse montre que la stratégie conjointe de l’ADPQ et de la SAAQ, caractérisée par une hausse des constats émis et des campagnes médiatiques, fut suivie de baisses variant entre 14 et 36 % des collisions avec blessures graves. Interprétation. Les résultats démontrent que les actions policières ont une influence sur le bilan routier. Par contre, avant d’influer sur le comportement des automobilistes, certaines conditions doivent être respectées. Premièrement, l’intensité des contrôles policiers doit être suffisamment modifiée par rapport à son niveau initial. Deuxièmement, que ce soit une hausse ou une baisse, ce niveau doit être maintenu sur une période relativement longue (entre 12 et 24 mois environ) pour que les automobilistes soient exposés au message pénal et qu’ils considèrent ce changement dans le niveau de répression comme étant crédible. Troisièmement, l’émission de constats est un élément clé; la simple présence policière n’est pas suffisante pour prévenir les collisions. Enfin, les campagnes de sensibilisation semblent importantes, mais d’autres études sont nécessaires pour mieux apprécier leur rôle.

Synthesis of polyelectrolyte brushes on silica-based substrates through surface-initiated polymerization : brush characterization and responsiveness to variation in pH and ionic strength

Les brosses de polyélectrolytes font l’objet d’une attention particulière pour de nombreuses applications car elles présentent la capacité de changer de conformation et, par conséquent, de propriétés de surface en réponse aux conditions environnementales appliquées. Le contrôle des principaux paramètres de ces brosses telles que l'épaisseur, la composition et l'architecture macromoléculaire, est essentiel pour obtenir des polymères greffés bien définis. Ceci est possible avec la Polymérisation Radicalaire par Transfert d’Atomes - Initiée à partir de la Surface (PRTA-IS), qui permet la synthèse de brosses polymériques de manière contrôlée à partir d’une couche d'amorceurs immobilisés de manière covalente sur une surface. Le premier exemple d’une synthèse directe de brosses de poly(acide acrylique) (PAA) par polymérisation radicalaire dans l’eau a été démontré. Par greffage d’un marqueur fluorescent aux brosses de PAA et via l’utilisation de la microscopie de fluorescence par réflexion totale interne, le dégreffage du PAA en temps réel a pu être investigué. Des conditions environnementales de pH ≥ 9,5 en présence de sel, se sont avérées critiques pour la stabilité de la liaison substrat-amorceur, conduisant au dégreffage du polymère. Afin de protéger de l’hydrolyse cette liaison substrat-amorceur sensible et prévenir le dégreffage non souhaité du polymère, un espaceur hydrophobique de polystyrène (PS) a été inséré entre l'amorceur et le bloc de PAA stimuli-répondant. Les brosses de PS-PAA obtenues étaient stables pour des conditions extrêmes de pH et de force ionique. La réponse de ces brosses de copolymère bloc a été étudiée in situ par ellipsométrie, et le changement réversible de conformation collapsée à étirée, induit par les variations de pH a été démontré. De plus, des différences de conformation provenant des interactions du bloc de PAA avec des ions métalliques de valence variable ont été obtenues. Le copolymère bloc étudié semble donc prometteur pour la conception de matériaux répondant rapidement a divers stimuli. Par la suite, il a été démontré qu’un acide phosphonique pouvait être employé en tant qu’ amorceur PRTA-IS comme alternative aux organosilanes. Cet amorceur phosphonate a été greffé pour la première fois avec succès sur des substrats de silice et une PRTA-IS en milieux aqueux a permis la synthèse de brosses de PAA et de poly(sulfopropyl méthacrylate). La résistance accrue à l’hydrolyse de la liaison Sisubstrat-O- Pamorceur a été confirmée pour une large gamme de pH 7,5 à 10,5 et a permis l’étude des propriétés de friction des brosses de PAA sous différentes conditions expérimentales par mesure de forces de surface. Malgré la stabilité des brosses de PAA à haute charge appliquée, les études des propriétés de friction ne révèlent pas de changement significatif du coefficient de friction en fonction du pH et de la force ionique.

Shelley’s editing process in the preface to Epipsychidion

Prefaces are often disregarded by readers who, more often than not, start without taking time to peruse them first. Sir Walter Scott knew this perfectly well, and he wrote about it, very wittily, in "A PostScript Which Should Have Been a Preface", the last chapter of his novel Waverley written in 1814: "most novel readers, as my own conscience reminds me, are apt to be guilty of the sin of omission respecting the same matter of prefaces". Scott refers to novel readers but poetry readers are also "guilty of the sin of omission", maybe even more so in so far as they may wish, understandably enough, to read only poetry and not a prose introduction. Many critics include prefaces in their analysis, but most of the time only as a means of interpreting the work they precede. Thus critics limit the role of prefaces simply to introductory materials and exclude any other potential interpretation. It is sometimes forgotten that the very presence or absence of a preface is already pregnant with meaning. [...]

Reinforcement Learning Approaches to Power System Scheduling

One major component of power system operation is generation scheduling. The objective of the work is to develop efficient control strategies to the power scheduling problems through Reinforcement Learning approaches. The three important active power scheduling problems are Unit Commitment, Economic Dispatch and Automatic Generation Control. Numerical solution methods proposed for solution of power scheduling are insufficient in handling large and complex systems. Soft Computing methods like Simulated Annealing, Evolutionary Programming etc., are efficient in handling complex cost functions, but find limitation in handling stochastic data existing in a practical system. Also the learning steps are to be repeated for each load demand which increases the computation time.Reinforcement Learning (RL) is a method of learning through interactions with environment. The main advantage of this approach is it does not require a precise mathematical formulation. It can learn either by interacting with the environment or interacting with a simulation model. Several optimization and control problems have been solved through Reinforcement Learning approach. The application of Reinforcement Learning in the field of Power system has been a few. The objective is to introduce and extend Reinforcement Learning approaches for the active power scheduling problems in an implementable manner. The main objectives can be enumerated as:(i) Evolve Reinforcement Learning based solutions to the Unit Commitment Problem.(ii) Find suitable solution strategies through Reinforcement Learning approach for Economic Dispatch. (iii) Extend the Reinforcement Learning solution to Automatic Generation Control with a different perspective. (iv) Check the suitability of the scheduling solutions to one of the existing power systems.First part of the thesis is concerned with the Reinforcement Learning approach to Unit Commitment problem. Unit Commitment Problem is formulated as a multi stage decision process. Q learning solution is developed to obtain the optimwn commitment schedule. Method of state aggregation is used to formulate an efficient solution considering the minimwn up time I down time constraints. The performance of the algorithms are evaluated for different systems and compared with other stochastic methods like Genetic Algorithm.Second stage of the work is concerned with solving Economic Dispatch problem. A simple and straight forward decision making strategy is first proposed in the Learning Automata algorithm. Then to solve the scheduling task of systems with large number of generating units, the problem is formulated as a multi stage decision making task. The solution obtained is extended in order to incorporate the transmission losses in the system. To make the Reinforcement Learning solution more efficient and to handle continuous state space, a fimction approximation strategy is proposed. The performance of the developed algorithms are tested for several standard test cases. Proposed method is compared with other recent methods like Partition Approach Algorithm, Simulated Annealing etc.As the final step of implementing the active power control loops in power system, Automatic Generation Control is also taken into consideration.Reinforcement Learning has already been applied to solve Automatic Generation Control loop. The RL solution is extended to take up the approach of common frequency for all the interconnected areas, more similar to practical systems. Performance of the RL controller is also compared with that of the conventional integral controller.In order to prove the suitability of the proposed methods to practical systems, second plant ofNeyveli Thennal Power Station (NTPS IT) is taken for case study. The perfonnance of the Reinforcement Learning solution is found to be better than the other existing methods, which provide the promising step towards RL based control schemes for practical power industry.Reinforcement Learning is applied to solve the scheduling problems in the power industry and found to give satisfactory perfonnance. Proposed solution provides a scope for getting more profit as the economic schedule is obtained instantaneously. Since Reinforcement Learning method can take the stochastic cost data obtained time to time from a plant, it gives an implementable method. As a further step, with suitable methods to interface with on line data, economic scheduling can be achieved instantaneously in a generation control center. Also power scheduling of systems with different sources such as hydro, thermal etc. can be looked into and Reinforcement Learning solutions can be achieved.

A marine candida sake as source of immunostimulants to fenneropenaeus indicus

Aquaculture has developed rapidly over the last three decades to become an important activity worldwide.The Food and Agricultural Organization (FAO) of the UN acknowledge that global fishery output must be increased by at least 50% to offset projected shortfalls in dietary protein by 2030.LAquaculture has developed rapidly over the last three decades and has become an importat industry as today’s demand for fish exceeds the natural supply.lmmunostimulants are chemical compounds that activate the immune system of animals and render them more resistant to infections by viruses, bacteria, fungi, and parasites. lmmunostimulants have been obtained from diverse natural sources where, microbial cell wall acts as the main source.The salient findings of the study are summariseSeven marine yeasts were screened for growth promoting and immunostimulant property in F. indicus. Candida sake S165 was found to be best in terms of its support for growth and protection against white spot virus infection.The study revealed that marine yeast Candida sake can be effectively used as potential source of immunostimulants for application in penaeid prawns culture systems. The study emphasise the fact that the dose and frequency of application of immunostimulants are to be standardised and validated before commercialisation to achieve optimum stimulation of the immune system and to avoid immune fatigue die to verdose.Marine yeast (whole cell) was found to support better immunostimulation compared to its cell wall component B-1,3-glucan. This study shows that administration of marine yeast (whole cell) or B-1,3-glucan as immunostimulants in aquaculture would definitely help in protection of the stock to a few more days even though total protection is not being imparted. This partial protection itself would be highly helpful to the farming industry so that they can get sufficient time to plan for a safe harvest and save the crop from cent percent mortality.

Compensation to Workmen for Industrial Injuries

This thesis Entitled compensation to workmen for industrial injuries.Evaluation of the different forms of liability for compensating industrial injuries makes it evident that the liability under the social insurance scheme is the most befitting one, as it eliminates the problem of evasion of liability by the employer by providing for sharing of liability. Liability for compensation under the workmen's Compensation Act, 1923 and the Employees' State Insurance Act, 1948 arises only in the case of accidents, arising in the course of and out of employment. Majority of the workers, covered by the workmen's Compensation Act, have supported lumpsum payment of compensation under the Act. It appears that workers are ignorant of the cemerits of lumpsum payment. So, the workers should be properly educated by the Inspectorate, proposed above, about the comparative advantages of periodical payments. It is suggested that the workmens Compensation Act, 1923 may be amended, imposing fee upon the parties for each adjournment. It is also suggested that provision may be made in the workmens Compensation Act, 1923 for the expeditious despatch of amendments of the Workmen's Compensation Act, 1923, the Workmens· Compensation Rules, 1924 and the Schedules, made from time to time, to the comrnissioners for workmens Compensation, This will help them mete out justice to an injured workman, as required by the changes in the law. The Employees' State Insurance Act, 1948 and the Rules may be amended, requiring the employers to provide the employees with necessary information, in the vernacular language, about the employment injury benefits available under the Employees' State Insurance Act, 1948 and the formalities for obtaining the same. This will help the illiterate employees, especially the casual ones, avail of employment injury benefits. Changes in the law, on the lines suggested above, are imperative to make the system of compensation for industrial injuries prove effective and beneficial to injured workmen.

Behaviour of laterised normal and self compacting concrete subjected to elevated temperatures

Concrete is a universal material in the construction industry. With natural resources like sand and aggregate, fast depleting, it is time to look for alternate materials to substitute these in the process of making concrete. There are instances like exposure to solar radiation, fire, furnaces, and nuclear reactor vessels, special applications like missile launching pads etc., where concrete is exposed to temperature variations In this research work, an attempt has been made to understand the behaviour of concrete when weathered laterite aggregate is used in both conventional and self compacting normal strength concrete. The study has been extended to understand the thermal behaviour of both types of laterised concretes and to check suitability as a fire protection material. A systematic study of laterised concrete considering parameters like source of laterite aggregate, grades of Ordinary Portland Cement (OPC) and types of supplementary cementitious materials (fly ash and GGBFS) has been carried out to arrive at a feasible combination of various ingredients in laterised concrete. A mix design methodology has been proposed for making normal strength laterised self compacting concrete based on trial mixes and the same has also been validated. The physical and mechanical properties of laterised concretes have been studied with respect to different variables like exposure temperature (200°C, 400°C and 600°C) and cooling environment (air cooled and water cooled). The behaviour of ferrocement elements with laterised self compacting concrete has also been studied by varying the cover to mesh reinforcement (10mm to 50mm at an interval of 10mm), exposure temperature and cooling environment.

An Effective Path Protection Method to Attain the Route Stability in MANET

With the increasing popularity of wireless network and its application, mobile ad-hoc networks (MANETS) emerged recently. MANET topology is highly dynamic in nature and nodes are highly mobile so that the rate of link failure is more in MANET. There is no central control over the nodes and the control is distributed among nodes and they can act as either router or source. MANTEs have been considered as isolated stand-alone network. Node can add or remove at any time and it is not infrastructure dependent. So at any time at any where the network can setup and a trouble free communication is possible. Due to more chances of link failures, collisions and transmission errors in MANET, the maintenance of network became costly. As per the study more frequent link failures became an important aspect of diminishing the performance of the network and also it is not predictable. The main objective of this paper is to study the route instability in AODV protocol and suggest a solution for improvement. This paper proposes a new approach to reduce the route failure by storing the alternate route in the intermediate nodes. In this algorithm intermediate nodes are also involved in the route discovery process. This reduces the route establishment overhead as well as the time to find the reroute when a link failure occurs.

How to do a dissertation

The role of the supervisor• agree a timetable of meetings at the start of your project and stick to it;• make sure that each meeting has a focus eg “setting a research problem”,“analysing the data”;• send something that can form the basis of a discussion about your progress to your supervisor before each meeting. This could include your research plan, early results of your data collection or draft chapters;• turn up on time to each meeting you have arranged. Do not assume that your supervisor is available at all times to see you;• at the end of each