Pollen and non-pollen palynomorph records of the Holocene part of the composite sediment core TMD from lake Tso Moriri (NW India) and of modern surface samples from the Tso Moriri region

The high-altitude lake Tso Moriri (32°55'46'' N, 78°19'24'' E; 4522 m a.s.l.) is situated at the margin of the ISM and westerly influences in the Trans-Himalayan region of Ladakh. Human settlements are rare and domestic and wild animals are concentrating at the alpine meadows. A set of modern surface samples and fossil pollen from deep-water TMD core was evaluated with a focus on indicator types revealing human impact, grazing activities and lake system development during the last ca. 12 cal ka BP. Furthermore, the non-pollen palynomorph (NPP) record, comprising remains of limnic algae and invertebrates as well as fungal spores and charred plant tissue fragments, were examined in order to attest palaeolimnic phases and human impact, respectively. Changes in the early and middle Holocene limnic environment are mainly influenced by regional climatic conditions and glacier-fed meltwater flow in the catchment area. The NPP record indicates low lake productivity with high influx of freshwater between ca. 11.5 and 4.5 cal ka BP which is in agreement with the regional monsoon dynamics and published climate reconstructions. Geomorphologic observations suggest that during this period of enhanced precipitation the lake had a regular outflow and contributed large amounts of water to the Sutlej River, the lower reaches of which were integral part of the Indus Civilization area. The inferred minimum fresh water input and maximum lake productivity between ca. 4.5-1.8 cal ka BP coincides with the reconstruction of greatest aridity and glaciation in the Korzong valley resulting in significantly reduced or even ceased outflow. We suggest that lowered lake levels and river discharge on a larger regional scale may have caused irrigation problems and harvest losses in the Indus valley and lowlands occupied by sedentary agricultural communities. This scenario, in turn, supports the theory that, Mature Harappan urbanism (ca. 4.5-3.9 cal ka BP) emerged in order to facilitate storage, protection, administration, and redistribution of crop yields and secondly, the eventual collapse of the Harappan Culture (ca. 3.5-3 cal ka BP) was promoted by prolonged aridity. There is no clear evidence for human impact around Tso Moriri prior to ca. 3.7 cal ka BP, with a more distinct record since ca. 2.7 cal ka BP. This suggests that the sedimentary record from Tso Moriri primarily archives the regional climate history.

Palynological analyses of the sediments around the Miocene/Pliocene boundary in ODP Hole 151-911A

The late Neogene evolution of the Arctic to Subarctic region is poorly understood due to few available records and poor age control. At the margin of the Arctic Ocean, Yermak Plateau Ocean Drilling Program (ODP) Hole 911A is strategically located for establishing a stratigraphic framework for the Arctic. Here we present dinoflagellate cyst and acritarch data from 24 stratigraphic levels in the lower part (474.26-505.64 metres below the seafloor (mbsf)) of ODP Hole 911A. The marine palynomorphs indicate a latest Miocene to earliest Pliocene age (between 5.8 and 5.0 Ma) for the base of the hole based on the co-occurrence of the dinoflagellate cyst Barssidinium evangelineae and acritarch Lavradosphaera crista. Our age estimate for the sediments can possibly be further refined to 5.0-5.33 Ma based on the presence of Achomosphaera andalousiensis suttonensis, which apparently has a range restricted to the Pliocene. An age close to the Miocene/Pliocene boundary agrees with the planktonic foraminifer data. Together with recently available magnetostratigraphic data, the base of the hole is likely to be placed at ~5.2 Ma. This new chronostratigraphy is a first step towards a better understanding of the late Neogene palaeoenvironment for the Yermak Plateau and also for the wider Arctic to Subarctic region. The terrestrial and fresh water palynomorphs were most likely redistributed and/or displaced from the shelf towards deeper parts of the basin during contourite deposition under the influence of the West Spitsbergen Current. The in situ marine dinoflagellate cyst assemblage contains a mixture of cool water and thermophilic taxa, indicating sea-ice free, cool-temperate, warmer than present conditions at the Yermak Plateau. Rivers were likely the source for the freshwater influence.

Virtual Excursions: a new way to explore science in class

The educational platform Virtual Science Hub (ViSH) has been developed as part of the GLOBAL excursion European project. ViSH (http://vishub.org/) is a portal where teachers and scientist interact to create virtual excursions to science infrastructures. The main motivation behind the project was to connect teachers - and in consequence their students - to scientific institutions and their wide amount of infrastructures and resources they are working with. Thus the idea of a hub was born that would allow the two worlds of scientists and teachers to connect and to innovate science teaching. The core of the ViSH?s concept design is based on virtual excursions, which allow for a number of pedagogical models to be applied. According to our internal definition a virtual excursion is a tour through some digital context by teachers and pupils on a given topic that is attractive and has an educational purpose. Inquiry-based learning, project-based and problem-based learning are the most prominent approaches that a virtual excursion may serve. The domain specific resources and scientific infrastructures currently available on the ViSH are focusing on life sciences, nano-technology, biotechnology, grid and volunteer computing. The virtual excursion approach allows an easy combination of these resources into interdisciplinary teaching scenarios. In addition, social networking features support the users in collaborating and communicating in relation to these excursions and thus create a community of interest for innovative science teaching. The design and development phases were performed following a participatory design approach. An important aspect in this process was to create design partnerships amongst all actors involved, researchers, developers, infrastructure providers, teachers, social scientists, and pedagogical experts early in the project. A joint sense of ownership was created and important changes during the conceptual phase were implemented in the ViSH due to early user feedback. Technology-wise the ViSH is based on the latest web technologies in order to make it cross-platform compatible so that it works on several operative systems such as Windows, Mac or Linux and multi-device accessible, such as desktop, tablet and mobile devices. The platform has been developed in HTML5, the latest standard for web development, assuring that it can run on any modern browser. In addition to social networking features a core element on the ViSH is the virtual excursions editor. It is a web tool that allows teachers and scientists to create rich mash-ups of learning resources provided by the e-Infrastructures (i.e. remote laboratories and live webcams). These rich mash-ups can be presented in either slides or flashcards format. Taking advantage of the web architecture supported, additional powerful components have been integrated like a recommendation engine to provide personalized suggestions about educational content or interesting users and a videoconference tool to enhance real-time collaboration like MashMeTV (http://www.mashme.tv/).

Ensayos de laboratorio para la medida de la tasa de absorción específica (SAR) en dispositivos móviles

El proyecto trata del estudio de la tasa de absorción específica (SAR). En él se estudia la SAR que desprenden distintos dispositivos de comunicaciones inalámbricos. Se ha llevado a cabo en las instalaciones de la SETSI, en el laboratorio de radiofrecuencia situado en El Casar, Guadalajara, que pertenece al Ministerio de Industria Comercio y Turismo. La SAR es una relación entre la energía electromagnética acumulada en una masa de un material o tejido concreto. Por tanto, lo primero es definir la SAR, en la que se exponen sus parámetros. Además, se recogen los límites de exposición fijados por las normas internacionales IEC 62209-1 e IEC 62209-2 en relación a SAR. Posteriormente, acorde con las normas, se realiza una definición detallada de un banco de medidas de SAR, en donde se explica cada uno de los componentes del banco de manera detallada así como los sistemas que intervienen previamente a la realización de la medida, tipos de los sistemas para realizar las verificaciones pertinentes, y también las incertidumbres de ciertos parámetros. También se realiza un proceso completo de medida de SAR en el laboratorio de la SETSI, donde se realizan las comprobaciones necesarias para la realización de una serie de medidas sobre dispositivos de comunicaciones móviles. Éstas medidas se realizan primero sobre un teléfono móvil en las frecuencias de GSM, UMTS y WIFI, en las configuraciones estipuladas por la norma; “tocando” e “inclinada 15°” comparando los valores obtenidos con los límites marcados por las normas internacionales. Por último, en este apartado se realizan ciertas medidas con otras configuraciones que no están recogidas en la norma para intentar obtener los máximos valores de SAR posibles. Después se realiza una comparación entre dos dispositivos tipo “tablet”, para ello se realizan medidas en la banda de WIFI y se comentan los resultados obtenidos, relacionado con el diseño de cada uno de ellos. Posteriormente se realiza un presupuesto de un banco de SAR, donde se detallan todos los componentes que intervienen en la realización de las medidas de SAR, pero no se incluyen en él, los costes de mantenimiento o los costes relacionados con su uso. Por último se explican las conclusiones finales desprendidas de la realización de este proyecto de fin de carrera así como la bibliografía utilizada. ABTRACT This project consists on the study of the specific absorption rate (SAR).It studies the different SAR of several wireless communications devices. It has been held in SETSI’S facilities, in its radio frecuency laboratory located in El Casar, Guadalajara, which belongs to the Ministy of Industry, Trade and Tourism. The SAR is a ratio between the electromagnetic energy accumulated in a mass of concrete material or tissue. Therefore, the SAR is defined first, which sets its parameters. Also lists the exposure limits set by international standards IEC 62209-1 and IEC 62209-2 regarding SAR. Subsequently, according to the guidelines, performing a detailed definition of a SAR measures bench, which explains each of the components in detail of the bench and involved systems prior to the realization of the extent and types of systems to perform the necessary checks, and certain parameters uncertainties. Also performed a complete process for SAR in the SETSI laboratory, located in El Casar, Guadalajara, where the necessary checks are made to carry out a serie of measures on mobile communications devices. These will be carried out first on a mobile phone at frequencies of GSM, UMTS and WiFi, in the configurations set by the standard, "touch" and "tilt 15 °" comparing the values obtained with the limits set by international standards. Finally, this section will perform certain actions with other configurations that are not included in the standard to try to get the maximum possible SAR values. Then a comparison is made between two devices, such as "tablet", this will make measurements in the band WIFI and discussed the results, related to the design of each. Subsequently, a budget of a SAR bench, detailing all components involved in SAR measures, but not included in it, maintenance costs or the costs associated with its use. Finally conclusions are explained detached from the realization of this project as well as the bibliography used on it.

Android en el Hogar Digital usando UPnP y Redes LonWorks

Este Proyecto Final de Carrera se centra principalmente en el estudio de las tecnologías aplicadas al Hogar Digital (HD) y así poder desarrollar nuevas herramientas aplicadas a este Sector. La primera tecnología estudiada es LonWorks que se escogió porque en la EUITT se cuenta con un entorno domótico donde se aplica esta tecnología, materializado como una maqueta de una instalación LonWorks en un HD. Sobre este entorno se ha desarrollado una nueva forma de gestionar y controlar los elementos de una Red LonWorks mediante la tecnología Universal Plug & Play (UPnP). Los dispositivos LonWorks han sido recubiertos con una capa con la que se consigue tratar los elementos LonWorks como dispositivos UPnP, pudiendo de esta manera trabajar bajo un mismo formato de dispositivo. Este formato está definido por un documento denominado Descripción del Dispositivo UPnP. Por tanto, no es necesario conocer el estado de los dispositivos de la Red LonWorks, sino únicamente trabajar bajo una Red UPnP, creando nuevos dispositivos UPnP, puntos de Control y servicios a partir de los elementos LonWorks. Una vez realizado el recubrimiento del sistema LonWorks con UPnP, se ha definido y desarrollado una aplicación para Android que, permite controlar los elementos de la maqueta del HD desde un Smartphone o una Tablet. El acceso a la Red LonWorks de la maqueta del HD se hace a través de la interfaz Web Services SOAP/XML del dispositivo iLON100. ABSTRACT. This Final Degree Project is mainly focused on the study of the technologies applied to Digital Home and thus be able to develop new tools applied to this area. The first study is LonWorks technology which was chosen because the EUITT has a domotic environment where this technology is applied, materialized as a demonstrator of a LonWorks installation in HD. With this environment has developed a new way to manage and control the elements of a LonWorks network through technology by Universal Plug & Play (UPnP). LonWorks devices are covered with a layer and it is achieved LonWorks elements treat as UPnP devices. In this way the LonWorks elements can work under one device format. This format is defined by a document called UPnP Device Description. Therefore, it isn't necessary to know the state of the LonWorks network devices, but only work under an UPnP network, creating new UPnP devices, control points and services from LonWorks elements. After backfill of LonWorks system with UPnP, have being defined and developed an Android application that allow controlling the elements of the mockup of HD from Smartphone or a Tablet. The LonWorks network Access of the mockup of HD is done through the Web Interface Services SOAP / XML iLON100 device.

Multi-agent location system in wireless networks

In this paper we propose a flexible Multi-Agent Architecture together with a methodology for indoor location which allows us to locate any mobile station (MS) such as a Laptop, Smartphone, Tablet or a robotic system in an indoor environment using wireless technology. Our technology is complementary to the GPS location finder as it allows us to locate a mobile system in a specific room on a specific floor using the Wi-Fi networks. The idea is that any MS will have an agent known at a Fuzzy Location Software Agent (FLSA) with a minimum capacity processing at its disposal which collects the power received at different Access Points distributed around the floor and establish its location on a plan of the floor of the building. In order to do so it will have to communicate with the Fuzzy Location Manager Software Agent (FLMSA). The FLMSAs are local agents that form part of the management infrastructure of the Wi-Fi network of the Organization. The FLMSA implements a location estimation methodology divided into three phases (measurement, calibration and estimation) for locating mobile stations (MS). Our solution is a fingerprint-based positioning system that overcomes the problem of the relative effect of doors and walls on signal strength and is independent of the network device manufacturer. In the measurement phase, our system collects received signal strength indicator (RSSI) measurements from multiple access points. In the calibration phase, our system uses these measurements in a normalization process to create a radio map, a database of RSS patterns. Unlike traditional radio map-based methods, our methodology normalizes RSS measurements collected at different locations on a floor. In the third phase, we use Fuzzy Controllers to locate an MS on the plan of the floor of a building. Experimental results demonstrate the accuracy of the proposed method. From these results it is clear that the system is highly likely to be able to locate an MS in a room or adjacent room.

Adaptive cross-device videoconferencing solution for wireless networks based on QoS monitoring

The increase in CPU power and screen quality of todays smartphones as well as the availability of high bandwidth wireless networks has enabled high quality mobile videoconfer- encing never seen before. However, adapting to the variety of devices and network conditions that come as a result is still not a trivial issue. In this paper, we present a multiple participant videoconferencing service that adapts to different kind of devices and access networks while providing an stable communication. By combining network quality detection and the use of a multipoint control unit for video mixing and transcoding, desktop, tablet and mobile clients can participate seamlessly. We also describe the cost in terms of bandwidth and CPU usage of this approach in a variety of scenarios.

Servicio ubicuo de estimulación cognitiva orientado a personas con enfermedad de Parkinson

Este trabajo de investigación detalla el diseño y evaluación de un servicio de e-salud cuyo objetivo es mejorar la estimulación y seguimiento de personas con un trastorno cognitivo. Con este fin, se ha desarrollado un protocolo de transferencia de mensajes que facilita la provisión de un servicio telemático para personas afectadas de Parkinson, pudiendo así realizar estimulación cognitiva personalizada, de forma ubicua, mediante un dispositivo fácil de usar como un tablet Android. Asimismo, este servicio permite a los terapeutas adaptar y monitorizar de forma segura la terapia, vía web, beneficiándose así de una mejor calidad en el seguimiento efectivo de cada paciente. El sistema ha sido evaluado satisfactoriamente durante tres meses con 10 pacientes entre 59 y 77 años. La solución resultante es fácilmente integrable con otras terapias complementarias y puede ser adaptada para otros deterioros cognitivos, como el debido a la enfermedad de Alzheimer o el deterioro cognitivo leve.

El aprendizaje en el proyecto URBANO

Se presenta el estado actual del proyecto URBANO, que en la versión 8.02 es una arquitectura distribuida de componentes orientada al diseño de aplicaciones en robots sociales. Se utiliza SOAP como mecanismo de integración remota. Se han diseñado nuevos componentes que permiten diferentes formas de aprendizaje. Por un lado, se ha diseñado una aplicación Android que posibilita la integración del móvil o tablet al control del robot. Por otro se ha desarrollado una ontología que permite representar, no solo conceptos, sino el aprendizaje propiamente dicho y se suman a los ya disponibles para la sintetización y reconocimiento de voces, gestión de gestos de cara y brazos, generación de trayectorias y navegación segura, modelo de estado de ánimo del robot y ejecución de tareas definidas por el usuario mediante el lenguaje propio UPL (Urbano Programming Language).