Estudo do processo de formação do cavaco durante o torneamento e sua relação com a microestrutura utilizando o método dos elementos finitos.

O objetivo desse trabalho foi avaliar o processo de formação do cavaco durante o torneamento utilizando simulação numérica pelo método dos elementos finitos. Para realizar o estudo foram definidos dois tipos de aços inoxidáveis austeníticos, um com matriz metálica sem a presença significativa de inclusões, do tipo ABNT 304, e outro com a presença de inclusões não metálicas, do tipo ABNT 303. O estudo foi focado nos mecanismos de formação e ruptura do cavaco, na determinação das forças de usinagem, no campo de tensões, deformações, e temperaturas durante o processo, que foram relacionados com aspectos e características da microestrutura do material. Os resultados obtidos foram comparados com as forças de usinagem experimentais, com a espessura e morfologia do cavaco. O desenvolvimento do trabalho, de acordo com a metodologia adotada, foi realizado em diferentes etapas. Inicialmente foi elaborado e aplicado um modelo de simulação da usinagem considerando o material homogêneo. Em outra etapa, foi realizada a modelagem de uma microestrutura submetida a um estado de tensão e deformação semelhante ao encontrado na simulação da usinagem realizada com material homogêneo. Os resultados mostraram que as partículas das inclusões maiores, alongadas, e em maior quantidade aumentam a tensão e a deformação na microestrutura. As elevadas temperaturas obtidas na usinagem dos aços inoxidáveis austeníticos aumentam a ductilidade dos sulfetos, esses se deformam em compressão junto com a matriz, e têm um efeito limitado como agente de redução dos esforços de usinagem. Por outro lado, os sulfetos facilitam a etapa de ruptura do cavaco em tensões trativas, e tendem a se romper facilitando o processo de quebra.

Estudo da remediação de um aquífero contaminado com sulfato e metais através de barreira reativa permeável orgânica.

Este trabalho teve como objetivo geral estudar a viabilidade técnica de utilizar bagaço de cana como meio reativo de barreiras reativas permeáveis (BRP) para remoção de sulfato e metais de águas subterrâneas contaminadas. O estudo baseou-se em investigação experimental, por meio de ensaios laboratoriais de coluna, e em modelagem matemática, para a qual utilizaram-se também alguns dados obtidos em um estudo de caso de uma unidade industrial contaminada com sulfato e metais. Neste local contaminado, as características hidrogeológicas e topográficas propiciam a utilização de uma barreira reativa permeável como técnica de remediação. Barreiras reativas permeáveis são uma alternativa para remediação de águas subterrâneas que vem progredindo rapidamente na última década, a partir de ensaios de bancada e coluna em laboratório para implementação em escala real em campo. Três colunas bióticas foram montadas utilizando bagaço de cana como meio reativo e um material de base poroso constituído de areia e cascalho para fornecer adequada condutividade hidráulica, com a proporção de 1:28 em massa seca. Também foi adicionado ao meio reativo um inóculo bacteriano composto por esterco bovino dissolvido. Uma quarta coluna, sem inóculo e contendo um agente biocida, compôs o experimento branco (abiótico). Uma solução sintética foi introduzida nas colunas simulando condições da água subterrânea do estudo de caso, com velocidade de Darcy em torno de 2,0x10-7 m/s composta por sulfato e metais (zinco e níquel) com concentrações de 6.000 mg/L e 15 mg/L, respectivamente. Os resultados das análises da fase líquida das colunas bióticas apresentaram: (i) média da taxa de remoção de sulfato durante todo o tempo do experimento de 49 mg/L/dia; (ii) as concentrações de Zn e Ni diminuíram de 15 mg/L para valores não detectáveis pela técnica analítica utilizada (< 0,01 mg/L); (iii) aumento do pH de 5.5-5.8 para valores entre 6,8-8,0; (iv) redução do valor do potencial de óxido redução (Eh) para valores de até -200mV. Não foram observadas reduções das concentrações de metais e sulfato na fase líquida da coluna abiótica e os valores de pH e Eh permaneceram dentro das faixas iniciais. Análises nas fases sólidas das colunas bióticas por MEV e EDS após o término do experimento identificaram a presença de Ni, Zn, S e Mn, indicando a precipitação desses metais em forma de sulfetos. Estes elementos não foram detectados na fase sólida da coluna abiótica. Assim, pôde-se inferir que toda a remoção de sulfato verificada nas colunas bióticas pode ser atribuída a redução bacteriana de sulfato. A partir das condições experimentais dos ensaios, foi realizada a modelagem e o dimensionamento da BRP. Para a estimativa da cinética de redução de sulfato, aplicou-se a solução analítica de Van Genuchten para transporte de contaminantes com degradação, obtendo-se uma taxa de decaimento de primeira ordem de 0,01 dia-1. A determinação da espessura e tempo de residência da barreira foi realizada considerando que a concentração de sulfato na saída da barreira fosse menor ou igual a 250 mg/L. O resultado do dimensionamento de uma BRP preenchida com bagaço de cana e areia nas proporções de 1:28 em massa seca resultaria em uma BRP de 7,1 m de espessura, com tempo de residência de 950 dias, no local de estudo de caso. Caso fosse utilizado o dobro da proporção de bagaço de cana e areia em massa seca (1:14), a implantação da BRP apresentar-se-ia viável, com espessura aproximada de 4 m. Através destes resultados, pôde ser comprovada a hipótese de que bagaço de cana como substrato e esterco bovino como inóculo compõem um meio reativo viável para a redução de sulfato e precipitação de metais em uma BRP.

Mineralogy and geochemistry of contrasting hydrothermal systems on the Arctic Mid Ocean Ridge (AMOR) : the Jan Mayen and Loki’s Castle vent fields

Tese de doutoramento, Ciências do Mar, Universidade de Lisboa, Faculdade de Ciências, 2016

(Table 1) Chemical composition of oceanic phosphates and their selenium content

Selenium content of phosphate material from the ocean bottom ranges from 0.2 to 4.7 mg/kg. Phosphorites of various ages from the Atlantic and Pacific Oceans contain 1.0-2.4 mg/kg of selenium, phosphatized coproliths 0.7-1.2 mg/kg, fish bones 0.2-1,4 mg/kg, and bones of marine mammals 0.5-4.7 mg/kg. Recent diatom muds on the shelf of Namibia are considerably enriched in selenium (12.2-13.8 mg/kg) than phosphorites that form within them. Accumulation of selenium in phosphate material on the ocean bottom results from diagenetic reduction, causing it to be precipitated from liquid phase and to concentrate in organic components and sulfides.

Sulfur isotope rations in oceanic basement samples

Low temperature alteration of oceanic basement rocks is characterized by net gain of sulfur, which commonly yields low d34S values, suggesting involvement of microbial sulfate reduction. In order to test whether secondary sulfide minerals are consistent with a biogenic source, we apply high precision multiple sulfur isotope analysis to bulk rock sulfide and pyrite isolates from two contrasting types of altered oceanic basement rocks, namely serpentinized peridotites and altered basalts. Samples from two peridotite sites (Iberian Margin and Hess Deep) and from a basalt site on the eastern flank of the Juan de Fuca Ridge yield overlapping d34S values ranging from 0 per mil to -44 per mil. In contrast, sulfides in the basalt site are characterized by relatively low D33S values ranging from -0.06 per mil to 0.04 per mil, compared to those from peridotite sites (0.00 per mil to 0.16 per mil). The observed D33S signal is significant considering the analytical precision of 0.014 per mil (2 sigma). We present a batch reaction model that uses observed d34S and D33S relationships to quantify the effect of closed system processes and constrain the isotope enrichment factor intrinsic to sulfate reduction. The estimated enrichment factors as large as 61 per mil and 53 per mil, for peridotite and basalt sites respectively, suggest the involvement of microbial sulfate reduction. The relatively high D33S values in the peridotite sites are due to sulfate reduction in a closed system environment, whereas negative D33S values in the basalt site reflect open system sulfate reduction. A larger extent of sulfate reduction during alteration of peridotite to serpentinite is consistent with its higher H2 production capacity compared to basalt alteration, and further supports in-situ microbial sulfate reduction coupled with H2 production during serpentinization reactions.

Composition of bottom sediments from the anoxic Mogil'noe Lake, Kil'din Island (Barents Sea)

In summer 2006 integrated geological, geochemical, hydrological, and hydrochemical studies were carried out in the relict anoxic Mogil'noe Lake (down to 16 m depths) located in the Kil'din Island in the Barents Sea. Chemical and grain size compositions of bottom sediments from the lake (permanently anoxic basin) and from the Baltic Sea deeps (periodically anoxic basins) were compared. Vertical location of the hydrogen sulfide layer boundary in the lake (9-11 m depths) was practically the same from 1974 up to now. Concentrations of suspended matter in the lake in June and July 2006 appeared to be close to its summer concentrations in seawater of the open Baltic Sea. Muds from the Mogil'noe Lake compared to those of the Baltic Sea deeps are characterized by fluid and flake consistency and by pronounced admixtures of sandy and silty fractions (probably of eolic origin). Lacustrine mud contains much plant remains; iron sulfides and vivianite were also found. Concentrations of 22 elements determined in lacustrine bottom sediments were of the same levels as those found here 33 years ago. Concentrations also appeared to be close to those in corresponding grain size types of bottom sediments in the Baltic Sea. Low C_org/N values (aver. 5.0) in muds of the Mogil'noe Lake compared to ones for muds of the Baltic Sea deeps (aver. 10) evidence considerable planktogenic component in organic matter composition of the lacustrine muds. No indications were reveled for anthropogenic contaminations of the lacustrine bottom sediments with toxic metals.

Mineral and chemical composition of hydrothermally altered rocks and sediments from the Middle Valley, ODP Leg 139 data

The Middle Valley segment at the northern end of the Juan de Fuca Ridge is a deep extensional rift blanketed with 200-500 m of Pleistocene turbiditic sediment. Sites 857 and 858 were drilled during Ocean Drilling Program Leg 139 to determine whether these two sites were hydrologically linked end members of an active hydrothermal circulation system. Site 858 was placed in an area of active hydrothermal discharge with fluids up to 270°C venting through anhydrite-bearing mounds on top of altered sediment. The shallow basement of fine-grained basalt that underlies the vents at Site 858 is interpreted as a seamount that was subsequently buried by turbidites. Site 857 was placed 1.6 km south of the Site 858 vents in a zone of high heat flow and numerous seismically imaged ridge-parallel faults. Drilling at Site 857 encountered sediments that are increasingly altered with depth and that overlie a series of mafic sills at depths of 460-940 m below sea floor. Sill margins and adjacent baked sediment are highly altered to magnesian chlorite and crosscut with veins filled with quartz, chlorite, sulfides, epidote, and wairakite. The sill interiors vary from slightly altered, with unaltered plagioclase and clinopyroxene in a mesostasis replaced by chlorite, to local zones of intense alteration and brecciation. In these latter zones, the sill interiors are pervasively replaced by chlorite, epidote, quartz, pyrite, titanite, and rare actinolite. The most complete replacement is associated with brecciated horizons with low recovery and slickensides on fracture surfaces, which we interpret as intersections between faults and the sills. Geochemically, the alteration of the sill complex is reflected in significant whole-rock depletions in Ca, Sr, and Na with corresponding enrichments in Mg, Al, and most metals. The latter results from the formation of conspicuous sulfide poikiloblasts. In contrast, metamorphism of the Site 858 seamount includes incomplete albitization of plagioclase phenocrysts and replacement of sparse mafic phenocrysts. Much of the basement alteration at Site 858 is confined to crosscutting veins except for a highly altered and veined horizon at the contact between basaltic basement and the overlying sediment. The sill complex at Site 857 is more highly depleted in 18O (d18O = 2.4 per mil - 4.7 per mil) and more pervasively replaced by secondary minerals relative to the extrusives at Site 858 (d18O = 4.5 per mil - 5.5 per mil). There is no evidence of significant albitization of the plagioclase at Site 857, suggesting high Ca/Na in the pore fluids. Fluid-inclusion data from hydrothermal minerals in altered mafic rocks and veins at Sites 857 and 858 show a consistency of homogenization temperatures, varying from 245 to 270°C, which is within the range of temperatures observed for the fluids venting at Site 858. The consistency of the fluid inclusion temperatures, the lack of albitization within the Site 857 sills, and the apparently low water/rock ratio collectively suggest that the sill complex at Site 857 is in thermal equilibrium and being altered by a highly evolved Ca-rich fluid similar to the fluids now venting at Site 858. The alteration evident in these two deep crustal drillsites is a result of the ongoing hydrothermal circulation and is consistent with downhole logging results, instrumented borehole results, and hydrothermal fluid chemistry. The pervasive alteration of the laterally extensive sill-sediment complex at Site 857 determines the chemistry of the fluids that are venting at Site 858. The limited alteration of the Site 858 lavas suggests that this basement edifice acts as a penetrator or ventilator for the regional hydrothermal reservoir with much of the flow focussed at the highly altered and veined sediment-basalt contact.

Magnetic susceptibility parameters of ODP Leg 204 sites

In this paper, we present a rock magnetic data set produced for sediments from Hydrate Ridge recovered during Ocean Drilling Program Leg 204. Our data set is based on several artificially induced magnetic properties that can be used as a diagnostic for the presence of magnetic iron sulfides. The occurrence of magnetic iron sulfides within the gas hydrate stability zone in locations where gas hydrates are present seems to confirm previous interpretations linking formation of such minerals with generation of gas hydrate. Magnetic iron sulfides are also found at positions deeper than the gas hydrate stability zone. We suggest that these positions, which include intervals located just below the bottom-simulating reflector and also at deeper positions, may mark the former presence of gas hydrates that have been later dissociated as the gas hydrate stability zone moved upward through time. Detailed characterization of the magnetic iron sulfide mineralogy and comparison with sedimentological and geochemical data will be attempted for better determining the significance of magnetic iron sulfides in Hydrate Ridge sediments and their possible applications in the study of gas hydrates.

Chemistry of very young basalts from ODP Hole 106-648B

Basalts in Hole 648B, located in the rift valley of the Mid-Atlantic Ridge at 23°N in crust estimated to be less than 100,000 years old, are mainly fresh, but small amounts of secondary phases are found on fracture surfaces and in alteration halos within the rocks. The halos are defined by dark bands 1-4 mm thick that have developed parallel to fracture surfaces or pillow margins and which in some cases have migrated some centimeters into the rock. The dark bands are the principal locus of secondary phases. The secondary phases are olive-green and yellow protoceladonites, of composition and structure intermediate between celadonite and iron-rich saponite, red (Mn-poor) to opaque (Mn-rich) iron oxyhydroxides, mixtures of protoceladonite and iron oxyhydroxide, and rare manganese oxides. These phases occur mainly as linings or fillings of open spaces in the basalt within the dark bands. Sulfides and intersertal glass are the only primary phases that can be seen to have been altered. Where dark bands have migrated into the rock, the rock behind the advancing band is almost devoid of secondary phases, implying redissolution. The potassium and magnesium in the secondary phases could have been supplied from ambient seawater. The aluminum in the protoceladonites must have been derived from local reaction of intergranular glass. The source of iron and silica could have been intergranular glass or low temperature mineralizing solutions of the type responsible for the formation of deposits of manganese oxides and iron oxyhydroxides and silicates on the seafloor.