Utilization of food industry wastes for the production of zero-valent iron nanoparticles

The proper disposal of the several types of wastes produced in industrial activities increases production costs. As a consequence, it is common to develop strategies to reuse these wastes in the same process and in different processes or to transform them for use in other processes. This work combines the needs for new synthesis methods of nanomaterials and the reduction of production cost using wastes from citrine juice (orange, lime, lemon and mandarin) to produce a new added value product, green zero-valent iron nanoparticles that can be used in several applications, including environmental remediation. The results indicate that extracts of the tested fruit wastes (peel, albedo and pulp fractions) can be used to produce zero-valent iron nanoparticles (nZVIs). This shows that these wastes can be an added value product. The resulting nZVIs had sizes ranging from 3 up to 300 nm and distinct reactivities (pulp > peel > albedo extracts). All the studied nanoparticles did not present a significant agglomeration/settling tendency when compared to similar nanoparticles, which indicates that they remain in suspension and retain their reactivity.

Depositions of rulers in the later middle ages: on the theory of th "useless ruler" and its practical utilization

pp. 157-168

Utilization of Quality Tools: does sector and size matter?

This research focuses on the influence of company sector and size on the level of utilization of Basic and Advanced Quality Tools. The paper starts with a literature review and then presents the methodology used for the survey. Based on the responses from 202 managers of Portuguese ISO 9001:2008 Quality Management System certified organizations, statistical tests were performed. Results show, with 95% confidence level, that industry and services have a similar proportion of use of Basic and Advanced Quality Tools. Concerning size, bigger companies show a higher trend to use Advanced Quality Tools than smaller ones. For Basic Quality Tools, there was no statistical significant difference at a 95% confidence level for different company sizes. The three basic Quality tools with higher utilization were Check sheets, Flow charts and Histograms (for Services) or Control Charts/ (for Industry), however 22% of the surveyed organizations reported not using Basic Quality Tools, which highlights a major improvement opportunity for these companies. Additional studies addressing motivations, benefits and barriers for Quality Tools application should be undertaken for further validation and understanding of these results.

Antibiotics Utilization Ratio in a Nicu

Introduction: Antibiotics are one of the most common prescribed drugs in the NICU; despite this, studies on its use are scarce. Aim: To assess antibiotics utilization ratio in a medical surgical NICU. Methods: Prospective, observational study. Daily registry of antibiotics given to newborn infants; two periods of two months, 2010; data collected every day after the second medical round. Variables: treated patients, days on antibiotics, treatment/patient days, number of courses, number of antibiotics. Antibiotics utilization ratio – ratio days on antibiotics/days at the NICU. Results: Patients enrolled - 113; admission days – 1722; length of stay - 15.2 days; 85 newborn infants were given antibiotics; days on antibiotics - 771; antibiotics utilization ratio – 44.8; 292 antibiotics were prescribed; 61.8% of patients were given more than two antibiotics and 15.3% had more than one course. The most frequents were gentamicin, cefotaxime, ampicillin, vancomycin and metronidazole. Conclusion: Antibiotics utilization ratio should be subject of audits and a quality criteria on NICUs evaluation.

Estudo da Delaminação em Compósitos de Epóxido Reforçado com Borracha e Fibras Naturais

Nos últimos anos, a utilização dos materiais compósitos tem vindo a tornar-se cada vez mais comum em várias indústrias, onde se verifica uma ascensão na procura pelos mesmos. Características como o baixo peso aliado à sua alta resistência e rigidez permitem que estes materiais possuam diversas aplicações em variadas áreas, desde a medicina, aeronáutica, indústria automóvel e aeroespacial, até à indústria eletrónica. Hoje em dia, o uso de desperdícios sólidos de borracha e fibras naturais na produção de materiais compósitos é, mais que uma opção, uma necessidade ambiental. De forma a reduzir as enormes quantidades de desperdícios, foi criado um material compósito constituído por uma resina termoendurecível reforçada com esses dois tipos de desperdícios. Parâmetros de fabrico como a percentagem de borracha, o tamanho das partículas de borracha, a percentagem de fibras de cana-de-açúcar e o comprimento dessas fibras foram variados, com o objetivo de estudar a influência destes dois materiais nas propriedades mecânicas do compósito. Apesar da maior parte dos compósitos serem fabricados na forma de uma peça funcional quase pronta a ser utilizada, por vezes é necessário recorrer à maquinação de furos. Apesar das muitas técnicas de furação existentes, os defeitos resultantes deste processo aplicado aos materiais compósitos são ainda muito comuns. Desses defeitos o que mais se destaca é sem dúvida a delaminação. Trinta e seis provetes de epóxido reforçado com borracha e fibra de cana-de-açúcar foram fabricados e furados, de modo a possibilitar o estudo das propriedades mecânicas do material compósito, assim como a análise da zona danificada durante a furação. Diferentes condições de furação, como tipos de broca e velocidades de avanço diferentes, foram impostas aos provetes de forma a variar o mais possível a zona de dano de uns furos para os outros. Parâmetros como a área de dano ou ainda o fator de delaminação provam ser muito úteis na caracterização e quantificação do dano na zona periférica de um furo. Recorrendo a técnicas de processamento de imagem foi possível obter esses parâmetros. O processamento e análise de imagem pode ser feito através de vários métodos. O método utilizado neste trabalho foi o software MATLAB® associado a ferramentas de processamento de imagem. Depois de feita a análise dos furos foram realizados ensaios de esmagamento a todos os provetes. Este passo permitiu assim avaliar de que forma os parâmetros de furação influenciam a resistência mecânica do material, e se a avaliação realizada aos furos é um método viável para a avaliação da extensão de dano nesses furos.

Production of chitin-glucan complex by Pichia pastoris

Dissertation for the Degree of Master in Biotechnology

Utilization of waste materials to improve asphalt mixtures performance

This study aims to develop an innovative bitumen with large quantities of waste materials to improve asphalt mixtures performance. Different amounts of waste motor oil and waste HDPE were added to a new bitumen. The bitumen modified with 10% of waste motor oil and 5% of HDPE showed promising characteristics (high softening point temperatures and penetration slightly higher than the conventional bitumen). After the selection of the most promising modified bitumen, three asphalt mixtures were produced with different bitumens (namely conventional bitumen, commercial modified bitumen and the selected modified bitumen). Beyond that, this modified bitumen improved some mechanical characteristics of the asphalt mixture where it was used, in comparison to conventional and modified asphalt mixtures.

Utilización de biomarcadores para la evaluación integrada de la calidad del agua de la cuenca del río Suquía.Utilization of biomarkers for the integrated evaluation of water quality of the Suquía River Basin.

En los últimos años el grupo de investigación ha caracterizado la calidad de los cuerpos de agua, detectando gradientes de calidad ambiental que se manifiestan por la aparición de tóxicos que generan cambios en la calidad del agua, sedimento y especialmente en la biota. El presente proyecto propone una evaluación integrada de la contaminación de los recursos hídricos abarcando el estudio de las causas de la contaminación y las respuestas biológicas que se producen ante dichas alteraciones. Por ello nuestro objetivo principal es evaluar la contaminación de los recursos acuáticos a través del desarrollo y aplicación de diversas herramientas. El enfoque multidisciplinario del mismo permitirá integrar los análisis de las diferentes áreas de estudio, con el fin de brindarán soluciones al problema generalizado de la contaminación acuática. El fin último es alcanzar una mejor valoración de los cambios temporales y espaciales en la calidad de las cuencas hídricas. Se propone analizar la presencia y concentración de tóxicos en agua, suelo, sedimento y biota conjuntamente con la evaluación de los efectos sobre los organismos a diferentes niveles de organización, lo que permitirá determinar y seleccionar los indicadores más eficientes de la contaminación ambiental. Se desarrollarán biomarcadores moleculares basados en expresión genética en la biota acuática y biomarcadores morfológicos, histológicos y bioquímicos. Además se evaluará el efecto del estrés tóxico sobre los hábitos natatorios de peces utilizando un software recientemente desarrollado por el grupo. También se intensificará la búsqueda de biomarcadores específicos de disrupción endocrina en peces tales como aromatasa, vitelogenina, parámetros estáticos y dinámicos de espermatozoides y comportamiento de cortejo y cópula. Así, el plan propuesto brindará un conjunto de herramientas, con diverso grado de complejidad, para ser usadas en la correcta evaluación del impacto ambiental de las actividades humanas. El grupo de trabajo pretende realizar una fuerte contribución a los conocimientos de base para crear conciencia sobre el problema de las diferentes cuencas en estudio, a fin de llevar a cabo un control sostenido de la calidad de los recursos acuáticos.

System-analytic safety evaluation of the hydrogen cycle for energetic utilization

Hydrogen, energy, safety, risk, production, transport, storage, filling station, fuelcell

Increasing the efficiency of utilization of soil and fertilizer phosphorus in the subtropical and tropical agricultural systems C

As a rule, soils of the subtropical and tropical regions, in which rainfall is not limiting, are acidic, and low in phosphorus, and, to a less extent, in other macro and micronutrients as well, such a sulfur, boron and zinc. The establishment of a permanent agricultural prac. tice therefore, demands relatively high usage of liming and phosphatic fertilization, to begin with. Several approaches, not mutually exclusive, could be used in order to increase the efficiency of utilization of soil and fertilizer phosphorus so that, goal of diminishing costs of production is reached. The use of liming materials bringing up pH to 6.0-6.5 causes the conversion of iron and aluminum phosphates to more available calcium phosphates; on the other hand, by raising calcium saturation in the exchange complex, it improves the development and operation if the root system which allows c or a higher utilization of all soil nutrients, including phosphorus, and helps of stand water deficits which may occur. The role of mycorrhizal fungi should be considered as a way of increasing soil and fertilizer P utilization, as well as the limitations thereof. Screening of and breeding for varieties with higher efficiency of uptake and utilization of soil and fertilizer phosphorus leads to a reduction in cost of inputs and to higher benefit/cost ratios. Corrective fertilization using ground rock phosphate helps to saturate the fixation power of the soil thereby reducing, as a consequence, the need for phosphorus in the maintenance fertilization. Maintenance fertilization, in which soluble phos-phatic sources are used, could be improved by several means whose performance has been proved: limimg, granula tion, placement, use of magnesium salts. Last, cost of phosphate fertilization could be further reduced, without impairing yields, through impairing yields, through changes in technology designed to obtain products better adapted to local conditions and to the availability or raw materials and energy sources.

Shell utilization pattern of the hermit crab Clibanarius vittatus (Crustacea, Anomura) in an estuary at São Vicente, State of São Paulo, Brazil

We evaluated the gastropod shell utilization pattern of the hermit crab Clibanarius vittatus (Bosc, 1802) at Pescadores Beach in São Vicente, State of São Paulo, Brazil. Specimens were collected monthly from May 2001 through April 2003, in the intertidal zone at low tide. The crabs were weighed and their carapace shield length measured. All gastropod shells were identified and had their shell biometric parameters (total length and aperture length) measured (mm) and weighed (g). A total of 2,344 hermit crabs (644 males, 1,594 females, 45 ovigerous females and 61 individuals in intersex), using 13 species of gastropod shells, were collected. Stramonita haemastoma (Linnaeus, 1767), Cymatium parthenopeum (Von Salis, 1793) and Achatina fulica (Bowdich, 1822) comprised over 98% of all the shells. Male and intersex crabs were significantly larger than the females. This size difference strongly influenced the shell utilization pattern, principally in A. fulica, which has the largest shell size, that was only used by males and intersexual individuals of C. vittatus. Cymatium parthenopeum was the only shell species that showed a high determinant coefficient in all the biometric correlations evaluated. The high abundance of S. haemastoma shells and a strong correlation between crab size and shell aperture length established by a significant determination coefficient, indicated that C. vittatus uses this species as the principal resource for shell occupation at Pescadores Beach.