Optimal location of supports in beam structures using genetic algorithms

Real structures can be thought as an assembly of components, as for instances plates, shells and beams. This later type of component is very commonly found in structures like frames which can involve a significant degree of complexity or as a reinforcement element of plates or shells. To obtain the desired mechanical behavior of these components or to improve their operating conditions when rehabilitating structures, one of the eventual parameters to consider for that purpose, when possible, is the location of the supports. In the present work, a beam-type structure is considered, and for a set of cases concerning different number and types of supports, as well as different load cases, the authors optimize the location of the supports in order to obtain minimum values of the maximum transverse deflection. The optimization processes are carried out using genetic algorithms. The results obtained, clearly show a good performance of the approach proposed. © 2014 IEEE.

Optimization of magneto-electro-elastic composite structures using differential evolution

Magneto-electro-elastic structures are built from materials that provide them the ability to convert in an interchangeable way, magnetic, electric and mechanical forms of energy. This characteristic can therefore provide an adaptive behaviour to a general configuration elastic structure, being commonly used in association with any type of composite material in an embedded or surface mounted mode, or by considering the usage of multiphase materials that enable achieving different magneto-electro-elastic properties. In a first stage of this work, a few cases studies will be considered to enable the validation of the model considered and the influence of the coupling characteristics of this type of adaptive structures. After that we consider the application of a recent computational intelligence technique, the differential evolution, in a deflection profile minimization problem. Studies on the influence of optimization parameters associated to the problem considered will be performed as well as the adoption of an adaptive scheme for the perturbation factor. Results are also compared with those obtained using an enhanced particle swarm optimization technique. (C) 2013 Elsevier Ltd. All rights reserved.

Optimization of structures modeled with a Meshfree approach

Radial basis functions are being used in different scientific areas in order to reproduce the geometrical modeling of an object/structure, as well as to predict its behavior. Due to its characteristics, these functions are well suited for meshfree modeling of physical quantities, which for instances can be associated to the data sets of 3D laser scanning point clouds. In the present work the geometry of a structure is modeled by using multiquadric radial basis functions, and its configuration is further optimized in order to obtain better performances concerning to its static and dynamic behavior. For this purpose the authors consider the particle swarm optimization technique. A set of case studies is presented to illustrate the adequacy of the meshfree model used, as well as its link to particle swarm optimization technique. © 2014 IEEE.

Tensile behaviour of single and double-strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. The experimental programme includes repairs with different values of overlap length (LO=10, 20 and 30 mm), and with and without plug filling. The influence of the testing speed on the repairs strength is also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature, 50ºC and 80ºC. This will permit a comparative evaluation of the adhesive tested below and above the Glass Transition Temperature (Tg), established by the manufacturer at 67ºC. The global tendencies of the test results concerning the plug filling and overlap length analyses are interpreted from the fracture modes and typical stress distributions for bonded repairs. According to the results obtained from this work, design guidelines for repairing aluminium structures were recommended.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

Synthesis of Sub-5 NM Co-Doped SnO2 nanoparticles and their structural microstructural, optical and photocatalytic properties

A swift chemical route to synthesize Co-doped SnO2 nanopowders is described. Pure and highly stable Sn1-xCoxO2-delta (0 <= x <= 0.15) crystalline nanoparticles were synthesized, with mean grain sizes <5 nm and the dopant element homogeneously distributed in the SnO2 matrix. The UV-visible diffuse reflectance spectra of the Sn1-xCoxO2-delta samples reveal red shifts, the optical bandgap energies decreasing with increasing Co concentration. The samples' Urbach energies were calculated and correlated with their bandgap energies. The photocatalytic activity of the Sn1-xCoxO2-delta samples was investigated for the 4-hydroxylbenzoic acid (4-HBA) degradation process. A complete photodegradation of a 10 ppm 4-HBA solution was achieved using 0.02% (w/w) of Sn0.95Co0.05O2-delta nanoparticles in 60 min of irradiation. (C) 2014 Elsevier B.V. All rights reserved.

Optimal design for active damping in sandwich structures using the Direct MultiSearch method

This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating.

Structure to function studies in UDP-glucose dehydrogenases and nitroreductases

The thesis is divided into two parts corresponding to structural studies on two different proteins. The first part concerns the study of two UDP-glucose dehydrogenases (UGDs) from Sphingomonas elodea ATCC 31461 and Burkholderia cepacia IST 408, both involved in exopolysaccharide production. Their relevance arises because some of these bacterial exopolysaccharides are valuable as established biotechnological products, the former case, whilst others are highly problematic, when used by pathogens in biofilm formation over biological surfaces, as the latter case, namely in the human lungs. The goal of these studies is to increase our knowledge regarding UGDs structural properties, which can potentiate either the design of activity enhancers to respond to the increased demand of useful biofilms, or the design of inhibitors of biofilm production, in order to fight invading pathogens present in several infections. The thesis reports the production and crystallisation of both proteins, the determination of initial phases by single-wavelength anomalous dispersion (SAD) in S. elodea crystals using a seleno-methionine isoform, and phasing of B. cepacia crystals by molecular replacement (MR) using the S. elodea model, as well as the refinement, structural analysis and comparison between the several UGDs structures available during this work.(...)

Low-cost vibration sensors: tendencies and applications in condition monitoring of machines and structures

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

PINPIN a-Si: H based structures for X-ray image detection using the laser scanning technique

Conventional film based X-ray imaging systems are being replaced by their digital equivalents. Different approaches are being followed by considering direct or indirect conversion, with the later technique dominating. The typical, indirect conversion, X-ray panel detector uses a phosphor for X-ray conversion coupled to a large area array of amorphous silicon based optical sensors and a couple of switching thin film transistors (TFT). The pixel information can then be readout by switching the correspondent line and column transistors, routing the signal to an external amplifier. In this work we follow an alternative approach, where the electrical switching performed by the TFT is replaced by optical scanning using a low power laser beam and a sensing/switching PINPIN structure, thus resulting in a simpler device. The optically active device is a PINPIN array, sharing both front and back electrical contacts, deposited over a glass substrate. During X-ray exposure, each sensing side photodiode collects photons generated by the scintillator screen (560 nm), charging its internal capacitance. Subsequently a laser beam (445 nm) scans the switching diodes (back side) retrieving the stored charge in a sequential way, reconstructing the image. In this paper we present recent work on the optoelectronic characterization of the PINPIN structure to be incorporated in the X-ray image sensor. The results from the optoelectronic characterization of the device and the dependence on scanning beam parameters are presented and discussed. Preliminary results of line scans are also presented. (C) 2014 Elsevier B.V. All rights reserved.

Sub-notificação de reacções adversas medicamentosas : um problema com solução? : contribuição para o conhecimento da sub-notificação de RAMs em Portugal e implementação de medidas minimizadoras do impacte

RESUMO - Introdução: As Reacções Adversas Medicamentosas (RAMs) constituem um grave problema de Saúde Pública em termos da mortalidade e morbilidade provocadas, tendo também um impacto económico considerável nos Sistemas de Saúde. Os Sistemas de Notificacão Espontânea de RAMs são considerados como o método de vigilância de medicamentos mais eficaz, sendo a sub-notificação de RAMs uma das suas maiores limitações. Em termos globais, foi estimado que apenas 6% de todas as reacções adversas são notificadas. Portugal apresenta uma taxa de notificação de RAMs relativamente baixa quando comparada com os países mais notificadores da Europa. São objectivos deste estudo: 1) caracterizar as atitudes e os comportamentos dos médicos, dos farmacêuticos e dos enfermeiros em Portugal Continental relativamente à notificação de RAMs; e 2) caracterizar a efectividade de intervenções educacionais destinadas a reduzir a sub-notificação de RAMs. Métodos: Numa primeira fase será efectuado um estudo de caso-controlo em médicos, farmacêuticos e enfermeiros de Portugal Continental, a exercer actividade no Servico Nacional de Saúde (SNS), de modo a caracterizar as suas atitudes e comportamentos relativamente à notificação de RAMs. Como casos serão considerados os Profissionais de Saúde que notificaram pelo menos uma RAM num determinado período e os controlos os Profissionais de Saúde que não notificaram qualquer RAM nesse mesmo período, sendo estes útimos seleccionados aleatoriamente. O estudo será conduzido através de um questionário de auto-resposta, em que as questões relativas às atitudes e comportamentos são baseadas nos “sete pecados mortais” de Inman. Será utilizada uma Escala Visual Analógica para registar as respostas, podendo estas ir de zero (totalmente em desacordo) até 10 (totalmente de acordo). Será utilizada uma análise de regressão logística para determinar o odds ratio ajustado (ORadj) da notificação de RAMs para uma mudança de exposição correspondente ao range interquartil para cada atitude. Numa segunda fase, será efectuado ensaio aleatorizado controlado de cluster, para caracterizar a efectividade das intervenções educacionais realizadas sobre as causas identificadas na primeira parte do trabalho, com o intuito de reduzir a sub-notificação de RAMs. Com base em informacão de 2007 foram identificados 43 clusters dispersos pelas várias Regiões de Saúde. As intervenções educacionais são compostas por uma apresentação com uma hora de duração complementada por um folheto recordatório. Serão ainda realizados dois sub-estudos, em que o V1.0, Final 28Set09 viii Sub-notificação de RAMs em Portugal – Um problema com solução ? primeiro tentará caracterizar o efeito de contaminação entre Profissionais de Saúde e o segundo pretende caracterizar a duração do efeito das intervenções educacionais. Resultados a atingir: Pretende-se, com a implementação deste projecto, aumentar o número de notificações de RAMs pelos médicos, farmacêuticos e enfermeiros em cerca de 110%, de modo a atingir-se uma taxa de notificação de aproximadamente 300 notificações por milhão de habitantes por ano (i.e., multiplicar por 2,1 o número notificações existentes). -------------------ABSTRACT - Introduction: The Adverse Drug Reactions (ADRs) are a serious Public Health problem in terms of mortality and morbidity caused, being also an economic burden for the health systems. The Spontaneous Adverse Event Reporting Systems are considered as the most effective drug surveillance methods, in which the ADR under-reporting represents one of its biggest limitations. It was estimated that only 6% of all adverse reactions are notified globally. When comparing with high ADR reporting rate countries Portugal shows a low ADR reporting rate. This study aims to: 1) characterize the physicians, pharmacists and nurses attitudes and behaviours related to ADR under-reporting; 2) characterize the educational interventions effectiveness to decrease the ADRs under-reporting. Methods: During a first phase a case-control study will be conducted in physicians, pharmacists and nurses in Continental Portugal working in the National Health System (NHS) in order to characterize their attitudes and behaviours related to ADR reporting. The Healthcare Professionals that have reported at least one ADR during a determined period will be considered as the cases and those that have not reported any ADR during the same period will be considered as the controls. The controls will be randomly selected. The study will be conducted through a self-administered questionnaire in which the questions related to the attitudes and behaviours are based in the Inmans’s “seven mortal sins”. A Visual Analogue Scale will be used to record the responses. The responses can range from 0 (totally disagree) to 10 (totally agree). Logistic regression will be used to determine the ADR reporting adjusted odds ratio (ORadj) for a change in the exposure corresponding to the interquartile range for each attitude. In the second phase of the study a cluster-randomized controlled trial will be conducted to characterize the educational interventions effectiveness focused on the first phase identified causes with the aim to decrease the ADRs under-reporting. Based in 2007’s information 43 clusters have been identified throughout the several Health Regions. The educational interventions are composed of one hour presentation complemented by an informational leaflet. Two sub-studies will be also conducted in which the first one will try to characterize the contamination effect between the Healthcare Professionals and the second to characterize the educational interventions effect duration. V1.0, Final 28Set09 x Sub-notificação de RAMs em Portugal – Um problema com solução ? Outcome: With the project implementation an increase of the ADR notifications performed by the physicians, pharmacists and nurses by 110% is aimed in order to obtain approximately 300 notifications per million habitants per year (i.e., multiply by 2,1 the existent notifications).

Analysis of sandwich beam structures using kriging based higher order models

Functionally graded composite materials can provide continuously varying properties, which distribution can vary according to a specific location within the composite. More frequently, functionally graded materials consider a through thickness variation law, which can be more or less smoother, possessing however an important characteristic which is the continuous properties variation profiles, which eliminate the abrupt stresses discontinuities found on laminated composites. This study aims to analyze the transient dynamic behavior of sandwich structures, having a metallic core and functionally graded outer layers. To this purpose, the properties of the particulate composite metal-ceramic outer layers, are estimated using Mod-Tanaka scheme and the dynamic analyses considers first order and higher order shear deformation theories implemented though kriging finite element method. The transient dynamic response of these structures is carried out through Bossak-Newmark method. The illustrative cases presented in this work, consider the influence of the shape functions interpolation domain, the properties through-thickness distribution, the influence of considering different materials, aspect ratios and boundary conditions. (C) 2014 Elsevier Ltd. All rights reserved.

Damage detection in structures using a transmissibility-based Mahalanobis distance

In this paper, a damage-detection approach using the Mahalanobis distance with structural forced dynamic response data, in the form of transmissibility, is proposed. Transmissibility, as a damage-sensitive feature, varies in accordance with the damage level. Besides, Mahalanobis distance can distinguish the damaged structural state condition from the undamaged one by condensing the baseline data. For comparison reasons, the Mahalanobis distance results using transmissibility are compared with those using frequency response functions. The experiment results reveal quite a significant capacity for damage detection, and the comparison between the use of transmissibility and frequency response functions shows that, in both cases, the different damage scenarios could be well detected. Copyright (c) 2015 John Wiley & Sons, Ltd.