Effects of flooding of the River Paraná on the temporal activity of Anopheles (Nyssorhynchus) darlingi Root (Diptera: Culicidae), at the border state of Mato Grosso do Sul and São Paulo, Brazil

INTRODUCTION: Study of the temporal activity of malaria vectors during the implantation of a hydroelectric power station on the River Paraná, intended to generate electrical energy. The river separates the States of São Paulo and Mato Grosso do Sul, in Brazil. The objective was to verify whether alterations occurred in the wealth and diversity indices of Anopheles, following two successive floods, extended to the temporal activity and nycthemeral rhythm followed over a five year period. METHODS: Mosquito capture was performed monthly using the Human Attraction Technique and Shannon Traps. The first, executed for 24h, provided the nycthemeral rhythm and the second, lasting 15h, permitted the tracking of Anopheles during the two floods. RESULTS: The bimodal pattern of Anopheles darlingi defined before these floods was modified throughout the environment interventions. The same effect had repercussions on the populations of An albitarsis s.l., An triannulatus and An galvaoi. Activity prior to twilight was less affected by the environment alterations. CONCLUSIONS: The dam construction provoked changes in Anopheles temporal activity patterns, permitting classification of the area as an ecologically steady and unstable situation. Differences observed in Anopheles behavior due to the capture methods revealed the influence of solo and multiple attractiveness inside the populations studied.

Aproveitamento de energia em sistemas de abastecimento de água

Dissertação de mestrado integrado em Engenharia Civil

Overcoming the supply inconsistencies of tidal current energy conversion devices

The adoption of a sustainable approach to meeting the energy needs of society has recently taken on a more central and urgent place in the minds of many people. There are many reasons for this including ecological, environmental and economic concerns. One particular area where a sustainable approach has become very relevant is in the production of electricity. The contribution of renewable sources to the energy mix supplying the electricity grid is nothing new, but the focus has begun to move away from the more conventional renewable sources such as wind and hydro. The necessity of exploring new and innovative sources of renewable energy is now seen as imperative as the older forms (i.e. hydro) reach the saturation point of their possible exploitation. One such innovative source of energy currently beginning to be utilised in this regard is tidal energy. The purpose of this thesis is to isolate one specific drawback to tidal energy, which could be considered a roadblock to this energy source being a major contributor to the Irish national grid. This drawback presents itself in the inconsistent nature in which a tidal device generates energy over the course of a 24 hour period. This inconsistency of supply can result in the cycling of conventional power plants in order to even out the supply, subsequently leading to additional costs. The thesis includes a review of literature relevant to the area of tidal and other marine energy sources with an emphasis on the state of the art devices currently in development or production. The research carried out included tidal data analysis and manipulation into a model of the power generating potential at specific sites. A solution is then proposed to the drawback of inconsistency of supply, which involves the positioning of various tidal generation installations at specifically selected locations around the Irish coast. The temporal shift achieved in the power supply profiles of the individual sites by locating the installations in the correct locations, successfully produced an overall power supply profile with the smoother curve and a consistent base load energy supply. Some limitations to the method employed were also outlined, and suggestions for further improvements to the method were made.

Estudi per la selecció de CAG pel procés de potabilització de l'ETAP Ter

El present document representa l’estudi per la selecció de CAG pel procés de potabilització de l’ETAP Ter a partir d’un disseny experimental de planta pilot de menor escala. Es determina l'adequació de carbó en base a les característiques físiques (superfície BET, índex de iode...) i la capacitat d’eliminació de COT i UV respecte la mostra a tractar.

Susceptibility of Biomphalaria amazonica and Biomphalaria occidentalis from Manso Dam, Mato Grosso, Brazil to infection with three strains of Schistosoma mansoni

As well as malaria and yellow fever, schistosomiasis is one of the main endemic diseases associated to environments which suffered some impact related to the development of great economic projects, as for example the construction of hydroelectric power stations. Aiming to investigate the occurrence and distribution of freshwater snails of medical and veterinary importance in the area which suffered impact from the Manso hydroelectric power station a survey was performed during the period of 2002 to 2003 and revealed the occurrence of populations of Biomphalaria amazonica and Biomphalaria occidentalis. Studies on parasite-mollusc compatibility were undertaken using five B. amazonica colonies (Barão de Melgaço, Poconé, Santo Antônio do Leverger, and Chapada dos Guimarães, in the Manso and Casca rivers), and four B. occidentalis colonies (Cuiabá, Santo Antônio do Leverger, and Chapada dos Guimarães, in the Água Fria district and Casca river) were exposed to miracidia of Schistosoma mansoni. Of 257 snails of B. amazonica used, 17 became infected (infection index of 6.61%) and all specimens of B. occidentalis proved unsusceptible. According to the strains used, of the 158 snails exposed to BH miracidia, 6 became infected (3.79%); of the 44 exposed to SJ miracidia, 6 became infected (13.63%); and of the 55 snails of B. amazonica exposed to EC miracidia, 5 became infected (9.09%). These results point out the low possibility of introduction of schistosomiasis in those areas, but we believe it can not be discarded as due the presence of B. amazonica.

Intercomparison of the response of different photon and neutron detectors around a spent fuel cask

An intercomparison of the response of different photon and neutron detectors was performed in several measurement positions around a spent fuel cask (type TN 12/2B) filled with 4 MOX and 8 UO2 15 x 15 PWR fuel assemblies at the nuclear power plant Gosgen (KKG) in Switzerland. The instruments used in the study were both active and passive, photon and neutron detectors calibrated either for ambient or personal dose equivalent. The aim of the measurement campaign was to compare the responses of the radiation instruments to routinely used detectors. It has been shown that especially the indications of the neutron detectors are strongly dependent on the neutron spectra around the cask due to their different energy responses. However, routinely used active photon and neutron detectors were shown to be reliable instruments. (C) 2012 Elsevier Ltd. All rights reserved.

CO2 emissions embodied in international trade: A multiregional Inputoutput model for Spain

As a result of globalization and free trade agreements, international trade is enormously growing and inevitably putting more pressure on the environment over the last few decades. This has drawn the attention of both environmentalist and economist in response to the ever growing concerns of climate change and urgent need of international action for its mitigation. In this work we aim at analyzing the implication of international trade in terms of CO2 between Spain and its important partners using a multi-regional input-output (MRIO) model. A fully integrated 13 regions MRIO model is constructed to examine the pollution responsibility of Spain both from production and consumption perspectives. The empirical results show that Spain is a net importer of CO2 emissions which is equivalent to 29% of its emission due to production. Even though the leading partner with regard to import values are countries such as Germany, France, Italy and Great Britain, the CO2 embodied due to trade with China takes the largest share. This is mainly due to the importation of energy intensive products from China coupled with Chinese poor energy mix which is dominated by coal-power plant. The largest portion (67%) of the global imported CO2 emissions is due to intermediate demand requirements by production sectors. Products such as Motor vehicles, chemicals, a variety of machineries and equipments, textile and leather products, construction materials are the key imports that drive the emissions due to their production in the respective exporting countries. Being at its peak in 2005, the Construction sector is the most responsible activity behind both domestic and imported emissions.

Proyecto de ejecución para las obras de concesión de dominio público para la reforma y adecuación de la central térmica y de la red de saneamiento en un hospital de 350 camas

El Hospital Punta de Europa en Algeciras (Cádiz), centro sanitario del Servicio Andaluz de Salud, desea optimizar la gestión de sus instalaciones de generación de energía térmica (vapor, agua caliente sanitaria y agua caliente de calefacción) y adecuarlas a la normativa vigente así como la sustitución de bajantes del edificio, para lo cual sacará a concurso público la licitación para la concesión de dominio público de dichas instalaciones. Para definir el alcance y condiciones de la citada concesión, el Hospital Punta de Europa (Algeciras) del Servicio Andaluz de Salud ha solicitado a Pedro Alonso Martín el estudio para la reforma y adecuación de las instalaciones productoras de energía térmica del citado Hospital. El objetivo principal de este trabajo es hacer un estudio, propuesta y valoración de las actuaciones necesarias para la reforma y mejora de la explotación de las instalaciones generadoras de energía térmica y de la red saneamiento interior del Hospital Punta de Europa de Algeciras (Cádiz). Las actuales instalaciones de generación térmica consumidoras de energía del hospital dentro del alcance de este Proyecto son: Generación de vapor (lavandería y esterilización). Producción de agua caliente sanitaria (ACS). Producción de agua caliente de calefacción. La mayoría de los equipos productores de energía datan del año 1975, por lo que en la mayoría de los casos se ha cumplido su plazo de amortización y periodo de vida útil. Se hace necesaria la instalación de gas natural, debido a que se tendrá que abastecer a todas las calderas de la central térmica. El diseño del sistema de producción de agua caliente sanitaria garantiza el máximo confort y economía del usuario, compatible con el máximo ahorro energético y la protección del medio ambiente, cubriendo las necesidades de agua caliente sanitaria mediante la combinación de un sistema de calderas a gas con los colectores solares.

Recovery of soil physical properties by green manure, liming, gypsum and pasture and spontaneous native species¹

Inadequate usage can degrade natural resources, particularly soils. More attention has been paid to practices aiming at the recovery of degraded soils in the last years, e.g, the use of organic fertilizers, liming and introduction of species adapted to adverse conditions. The purpose of this study was therefore to investigate the recovery of physical properties of a Red Latosol (Oxisol) degraded by the construction of a hydroelectric power station. In the study area, a soil layer about 8m thick had been withdrawn by heavy machines leading not only to soil compaction, but resulting in high-degree degradation. The experiment was arranged in a completely randomized design with nine treatments and four replications. The treatments consisted of: 1- soil mobilization by tilling (to ensure the effect of mechanical mobilization in all treatments) without planting, but growth of spontaneous vegetation; 2- Black velvet bean (Stizolobium aterrimum Piper & Tracy); 3- Pigeonpea (Cajanus cajan (L.) DC); 4- Liming + black velvet bean; 5-Liming + pigeonpea until 1994, when replaced by jack bean (Canavalia ensiformis); 6- Liming + gypsum + black velvet bean; 7- Liming + gypsum + pigeonpea until 1994, when replaced by jack bean; and two controls as reference: 8- Native Cerrado vegetation and 9- bare soil (no tilling and no planting), left under natural conditions and in this situation, without spontaneous vegetation. In treatments 1 through 7, the soil was tilled. Treatments were installed in 1992 and left unmanaged for seven years, until brachiaria (Brachiaria decumbens) was planted in all plots in 1999. Seventeen years after implantation, the properties soil macroporosity, microporosity, total porosity, bulk density and aggregate stability were assessed in the previously described treatments in the soil layers 0.00-0.10; 0.10-0.20 and 0.20-0.40 m, and soil Penetration Resistance and soil moisture in 0.00-0.15 and 0.15-0.30 m. The plants were evaluated for: brachiaria dry matter and spontaneous growth of native tree species in the plots as of 2006. Results were analyzed by variance analysis and Tukey´s test at 5 % for mean comparison. In all treatments, except for the bare soil (no recovery measures), ongoing recovery of the degraded soil physical properties was observed. Macroporosity, soil bulk density and total porosity were good soil quality indicators. The occurrence of spontaneous native species indicated the soil recovery process. The best adapted species was Machaerium acutifolium Vogel, with the largest number of plants and most advanced development; the dry matter production of B. decumbens in recovering soil was similar to normal conditions, evidencing soil recovery.

Advanced geostatistical and machine-learning models for spatial data analysis of radioactively contaminated regions

Radioactive soil-contamination mapping and risk assessment is a vital issue for decision makers. Traditional approaches for mapping the spatial concentration of radionuclides employ various regression-based models, which usually provide a single-value prediction realization accompanied (in some cases) by estimation error. Such approaches do not provide the capability for rigorous uncertainty quantification or probabilistic mapping. Machine learning is a recent and fast-developing approach based on learning patterns and information from data. Artificial neural networks for prediction mapping have been especially powerful in combination with spatial statistics. A data-driven approach provides the opportunity to integrate additional relevant information about spatial phenomena into a prediction model for more accurate spatial estimates and associated uncertainty. Machine-learning algorithms can also be used for a wider spectrum of problems than before: classification, probability density estimation, and so forth. Stochastic simulations are used to model spatial variability and uncertainty. Unlike regression models, they provide multiple realizations of a particular spatial pattern that allow uncertainty and risk quantification. This paper reviews the most recent methods of spatial data analysis, prediction, and risk mapping, based on machine learning and stochastic simulations in comparison with more traditional regression models. The radioactive fallout from the Chernobyl Nuclear Power Plant accident is used to illustrate the application of the models for prediction and classification problems. This fallout is a unique case study that provides the challenging task of analyzing huge amounts of data ('hard' direct measurements, as well as supplementary information and expert estimates) and solving particular decision-oriented problems.

Development of a Rational Characterization Method for Iowa Fly Ash, HR-286, 1988

This research project was conducted in an attempt to determine the cause of paste strength variability in Iowa fly ashes and to develop test methods to more adequately reflect fly ash physical and chemical characteristics. An extensive three year sampling and testing program was developed and initiated which incorporated fly ash from several Iowa power plants. Power plant design and operating data were collected. The variability was directly linked to power plant maintenance schedules and to sodium carbonate coal pretreatment. Fly ash physical and chemical properties can change drastically immediately before and after a maintenance outage. The concentrations of sulfate bearing minerals in the fly ash increases sharply during shutdown. Chemical, mineralogical, and physical testing indicated that the sodium, sulfate bearing minerals, lime and tricalcium aluminate contents of the fly ashes play important roles in the development of hydration reaction products in fly ash pastes. The weak pastes always contained ettringite as the major reaction product. The strong pastes contained straetlingite and monosulfoaluminate as the major reaction products along with minor amounts of ettringite. Recommendations for testing procedure changes and suggested interim test methods are presented.

Applications for Reuse of Lime Sludge from Water Softening, TR-535, 2005

Lime sludge, an inert material mostly composed of calcium carbonate, is the result of softening hard water for distribution as drinking water. A large city such as Des Moines, Iowa, produces about 30,700 tons of lime sludge (dry weight basis) annually (Jones et al., 2005). Eight Iowa cities representing, according to the United States (U.S.) Census Bureau, 23% of the state’s population of 3 million, were surveyed. They estimated that they collectively produce 64,470 tons of lime sludge (dry weight basis) per year, and they currently have 371,800 tons (dry weight basis) stockpiled. Recently, the Iowa Department of Natural Resources directed those cities using lime softening in drinking water treatment to stop digging new lagoons to dispose of lime sludge. Five Iowa cities with stockpiles of lime sludge funded this research. The research goal was to find useful and economical alternatives for the use of lime sludge. Feasibility studies tested the efficacy of using lime sludge in cement production, power plant SOx treatment, dust control on gravel roads, wastewater neutralization, and in-fill materials for road construction. Applications using lime sludge in cement production, power plant SOx treatment, and wastewater neutralization, and as a fill material for road construction showed positive results, but the dust control application did not. Since the fill material application showed the most promise in accomplishing the project’s goal within the time limits of this research project, it was chosen for further investigation. Lime sludge is classified as inorganic silt with low plasticity. Since it only has an unconfined compressive strength of approximately 110 kPa, mixtures with fly ash and cement were developed to obtain higher strengths. When fly ash was added at a rate of 50% of the dry weight of the lime sludge, the unconfined strength increased to 1600 kPa. Further, friction angles and California Bearing Ratios were higher than those published for soils of the same classification. However, the mixtures do not perform well in durability tests. The mixtures tested did not survive 12 cycles of freezing and thawing and wetting and drying without excessive mass and volume loss. Thus, these mixtures must be placed at depths below the freezing line in the soil profile. The results demonstrated that chemically stabilized lime sludge is able to contribute bulk volume to embankments in road construction projects.

Monipolttoainekattilan päästöjen tarkkailu ja raportointi

Suurten polttolaitosten päästöjen tarkkailu- ja raportointivaatimukset ovat uudistuneet viime vuosina paljon. Suurimpia muutosten aiheuttajia ovat Valtioneuvoston asetus 1017/2002 ja standardi EN-14181. Tässä työssä kuvataan uudet vaatimukset täyttävän päästöjen tarkkailu- ja raportointijärjestelmän rakentaminen monipolttoainekattilalle. Aluksi esitellään mitä uusia vaatimuksia päästöjen tarkkailulle ja raportoinnille on tullut viime aikoina. Lisäksi selvitetään vaatimusten mahdolliset ristiriidat ja ristiriitatilanteiden ratkaisutavat. Seuraavaksi esitellään vaatimukset täyttävän järjestelmän määritelmät. Erityisestiselvitetään kattilan erityispiirteiden vaatimia ratkaisuja. Lopuksi esitellään päästöjen tarkkailu- ja raportointijärjestelmän käyttökokemuksia ja parantamismahdollisuuksia. Kaikki tarkastelut tehdään ensisijaisesti toiminnanharjoittajan näkökulmasta. Järjestelmä toteutettiin Stora Enso Oyj:n Heinolan Flutingtehtaan voimalaitoksen pääkattilalle, jossa käytetään laajaa polttoainevalikoimaa. Toteutuspaikan valinta tehtiin sillä perusteella, että uudet päästöjen tarkkailu- ja raportointivaatimukset ovat erityisen haasteellisia monipolttoainekattiloiden tapauksessa. Työssä selvitetään järjestelmän soveltamismahdollisuuksia myös kahdella muulla Stora Enson tehtaalla. Käyttöönottovaiheen johtopäätöksenä todettiin päästöjen tarkkailu- ja raportointijärjestelmän täyttävän sille asetetut vaatimukset. Lisäksi havaittiin, että toiminnanharjoittajan kannattaa panostaa erityisesti järjestelmän joustavuuteen, luotettavuuteen, helppokäyttöisyyteen ja vikasietoisuuteen. Toiminnanharjoittaja pystyy määrittelyvaiheessa vaikuttamaan järjestelmän ominaisuuksiin helpommin ja edullisemmin kuin käyttöönoton jälkeen. Toiminnanharjoittajalta vaadittu työtuntimäärä arvioitiin Heinolan Flutingtehtaan tapauksen perusteella. Lopuksi selvitettiin mahdollisia tulevaisuuden kehityskohteita vastaavissa järjestelmissä.

Oulun Energian kaukolämpöverkoston ja -tuotannon kehitys vuosina 2006 - 2020

Tässä diplomityössä on tarkasteltu Oulun Energian kaukolämpötoiminnan kehitystä lähitulevaisuudessa. Työn yhteydessä selvitettiin nykyisessä tilanteessa mitoituslämpötilaa -32 oC vastaava tehotilastollisen analyysin avulla ja laadittiin kasvuennuste kaukolämmityksen tehontarpeesta seuraavalle viidelletoista vuodelle. Kasvuennusteen perusteella on tehty tarkastelu kaukolämmön varatehon riittävyydestä. Verkoston tehonsiirtokykyä nykyisissä ja tulevaisuuden kuormitustilanteissa on tarkasteltu Process VisioninGrades Heating -verkostolaskentaohjelmiston avulla. Tarkastelun perusteella kaukolämpöverkoston siirtokyky on kohtalaisen hyvä. Verkoston ongelmakohtia ovat länsi-itäsuunnassa olevat siirtolinjat. Varatehon määrä tulee laskemaan lähivuosina alle suositeltavan määrän, mikäli uutta lämmöntuotantokapasiteettia ei rakenneta. Alkuvaiheessa paras ratkaisu tilanteen korjaamiseksi olisi uusien lämpökeskusten rakentaminen sekä kaupungin etelä- että itä-osiin. 2010-luvulla tarve uuden voimalaitoksen rakentamiselle kaukolämpötehon tarpeen kattamiseksi tulee kasvamaan.

Laivan voimalaitoksen ja jännitevälipiirillisen ruoripotkurikäytön vuorovaikutusten mallintaminen

Diplomityössä on tutkittu sähköisellä potkurijärjestelmällä varustetun laivan voimalaitoksen ja jännitevälipiirillisen propulsiokäytön vuorovaikutusta laivan hätäpysäytyksen aikana. Työssä on kehitetty simulointimalleja jännitevälipiirillisten sähkökäyttöjen simuloimiseksi Saber -simulontiohjelmistolla.Työn alkuosassa esitetään lyhyt yhteenveto laivan sähköisestä potkurijärjestelmästä komponentteineen, käsitellään laivan hätäpysäytyksen teoriaa sekä simuloinneissa huomioonotettavia laivan ja potkurin hydrodynaamisia ominaisuuksia. Työssä käytettävän simulointiohjelmiston toimintaa selvitetään lyhyesti. Jännitevälipiirillisellä propulsiokäytöllä varustetun laivan hätäpysäytyksen simulointimalli esitellään kokonaisuudessaan ja käsitellään simulointimallin sisältämien osakokonaisuuksien teoriaa ja toimintaa. Kehitetyn simulointimallin toimintaa on tarkasteltu vertaamalla tuloksia vastaavansyklokonvertterikäytöllä varustetun laivan simulointituloksiin sekä vertaamallasimulointituloksia laivan merikoeajon yhteydessä tehtyihin mittauksiin. Simulointitulokset vastasivat teoriaa sekä mittaustuloksia varsin hyvin. Voimalaitoksenosalta ei mittaustuloksia ollut käytettävissä, mutta simulointitulokset ovat teorian mukaisia.