Kinetic behavior of Desulfovibrio gigas aldehyde oxidoreductase encapsulated in reverse micelles

Biochemical and Biophysical Research Communications 308 (2003) 73–78

O auteur a ver-se a si mesmo ao espelho: as alegorias do enunciador em Jean Cocteau

ABSTRACT - Jean Cocteau, French cinema auteur avant la lettre, has consecrated his uniqueness to the defense of the “poet” and the promotion of its artistic ideals, before the French Nouvelle Vague inspired the break away from the filmic tradition and ahead of the eulogistic tendency to consider the director the undisputed creative entity of the filmmaking process. The Orphic trilogy expresses Cocteau’s cinematic philosophy in action. In other words, it reveals the way by which the creative entity affirms itself as the major filmic enunciator, through an allegorical relationship with vision. Therefore, Cocteau’s self-reflexive metacinema conjoins, in a fertile attunement, the starting point and the ultimate goal, the creation and the reception. Without being exactly a cinema about the cinema, this artistic practice is, nonetheless, very much with the cinema, feeding as it does on its essence. The films Le Sang d’un poète (“The Blood of a Poet”, 1932), Orphée (“Orpheus”, 1950) and Le Testament d’Orphée, ou ne me demandez pas pourquoi! (“Testament of Orpheus”, 1960) recreate, in allegorical form, the double creative function: the look of the directing entity reflects the gaze of the observer, just as this one always restores the presence of the creator. In short: Cocteau’s films, more than anyone else’s, deliberately reflect its auteur as enunciator.

Tunnig optical A-Sic/A-Si active filters by UV bias light in the visible and infrared spectral ranges

Visible range to telecom band spectral translation is accomplished using an amorphous SiC pi'n/pin wavelength selector under appropriate front and back optical light bias. Results show that background intensity works as selectors in the infrared region, shifting the sensor sensitivity. Low intensities select the near-infrared range while high intensities select the visible part according to its wavelength. Here, the optical gain is very high in the infrared/red range, decreases in the green range, stays close to one in the blue region and strongly decreases in the near-UV range. The transfer characteristics effects due to changes in steady state light intensity and wavelength backgrounds are presented. The relationship between the optical inputs and the output signal is established. A capacitive optoelectronic model is presented and tested using the experimental results. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminium adherends

Polyolefins are especially difficult to bond due to their non-polar, non-porous and chemically inert surfaces. Acrylic adhesives used in industry are particularly suited to bond these materials, including many grades of polypropylene (PP) and polyethylene (PE), without special surface preparation. In this work, the tensile strength of single-lap PE and mixed joints bonded with an acrylic adhesive was investigated. The mixed joints included PE with aluminium (AL) or carbon fibre reinforced plastic (CFRP) substrates. The PE substrates were only cleaned with isopropanol, which assured cohesive failures. For the PE CFRP joints, three different surfaces preparations were employed for the CFRP substrates: cleaning with acetone, abrasion with 100 grit sand paper and peel-ply finishing. In the PE AL joints, the AL bonding surfaces were prepared by the following methods: cleaning with acetone, abrasion with 180 and 320 grit sand papers, grit blasting and chemical etching with chromic acid. After abrasion of the CFRP and AL substrates, the surfaces were always cleaned with acetone. The tensile strengths were compared with numerical results from ABAQUS® and a mixed mode (I+II) cohesive damage model. A good agreement was found between the experimental and numerical results, except for the PE AL joints, since the AL surface treatments were not found to be effective.

Política(s) de saúde no trabalho : um inquérito sociológico às empresas portuguesas

Resumo Política(s) de saúde no trabalho: um inquérito sociológico às empresas portuguesas A literatura portuguesa sobre políticas, programas e actividades de Segurança, Higiene e Saúde no Trabalho (abreviadamente, SH&ST) é ainda escassa. Com este projecto de investigação pretende-se (i) colmatar essa lacuna, (ii) melhorar o conhecimento dos sistemas de gestão da saúde e segurança no trabalho e (iii) contribuir para a protecção e a promoção da saúde dos trabalhadores. Foi construída uma tipologia com cinco grupos principais de políticas, programas e actividades: A (Higiene & Segurança no Trabalho / Melhoria do ambiente físico de trabalho); B (Avaliação de saúde / Vigilância médica / Prestação de cuidados de saúde); C (Prevenção de comportamentos de risco/ Promoção de estilos de vida saudáveis); D (Intervenções a nível organizacional / Melhoria do ambiente psicossocial de trabalho); E (Actividades e programas sociais e de bem-estar). Havia uma lista de mais de 60 actividades possíveis, correspondendo a um índice de realização de 100%. Foi concebido e desenhado, para ser auto-administrado, um questionário sobre Política de Saúde no Local de Trabalho. Foram efectuados dois mailings, e um follow-up telefónico. O trabalho de campo decorreu entre a primavera de 1997 e o verão de 1998. A amostra (n=259) é considerada representativa das duas mil maiores empresas do país. Uma em cada quatro é uma multinacional. A taxa de sindicalização rondava os 30% da população trabalhadora, mas apenas 16% dos respondentes assinalou a existência de representantes dos trabalhadores eleitos para a SH&ST. A hipótese de investigação principal era a de que as empresas com um sistema integrado de gestão da SH&ST seriam também as empresas com um (i) maior número de políticas, programas e actividades de saúde; (ii) maior índice de saúde; (iii) maior índice de realização; e (iv) maior percentagem dos encargos com a SH&ST no total da massa salarial. As actividades de tipo A e B, tradicionalmente associadas à SH&ST, representavam, só por si, mais de 57% do total. Os resultados, correspondentes às respostas da Secção C do questionário, apontam, para (i) a hipervalorização dos exames de medicina do trabalho; e por outro para (ii) o subaproveitamento de um vasto conjunto de actividades (nomeadamente as de tipo D e E), que são correntemente levadas a cabo pelas empresas e que nunca ou raramente são pensadas em termos de protecção e promoção da saúde dos trabalhadores. As actividades e os programas de tipo C (Prevenção de comportamentos de risco/Promoção de estilos de vida saudáveis), ainda eram as menos frequentes entre nós, a seguir aos Programas sociais e de bem-estar (E). É a existência de sistemas de gestão integrados de SH&ST, e não o tamanho da empresa ou outra característica sociodemográfica ou técnico-organizacional, que permite predizer a frequência de políticas de saúde mais activas e mais inovadores. Os três principais motivos ou razões que levam as empresas portuguesas a investir na protecção e promoção da saúde dos seus trabalhadores eram, por ordem de frequência, (i) o absentismo em geral; (ii) a produtividade, qualidade e/ou competitividade, e (iii) a filosofia de gestão ou cultura organizacional. Quanto aos três principais benefícios que são reportados, surge em primeiro lugar (i) a melhoria da saúde dos trabalhadores, seguida da (ii) melhoria do ambiente do ambiente de trabalho e, por fim, (iii) a melhoria da produtividade, qualidade e/ou competitividade.Quanto aos três principais obstáculos que se põem, em geral, ao desenvolvimento das iniciativas de saúde, eles seriam os seguintes, na percepção dos respondentes: (i) a falta de empenho dos trabalhadores; (ii) a falta de tempo; e (iii) os problemas de articulação/ comunicação a nível interno. Por fim, (i) o empenho das estruturas hierárquicas; (ii) a cultura organizacional propícia; e (iii) o sentido de responsabilidade social surgem, destacadamente, como os três principais factores facilitadores do desenvolvimento da política de saúde no trabalho. Tantos estes factores como os obstáculos são de natureza endógena, susceptíveis portanto de controlo por parte dos gestores. Na sua generalidade, os resultados deste trabalho põem em evidência a fraqueza teóricometodológica de grande parte das iniciativas de saúde, realizadas na década de 1990. Muitas delas seriam medidas avulsas, que se inserem na gestão corrente das nossas empresas, e que dificilmente poderão ser tomadas como expressão de uma política de saúde no local de trabalho, (i) definida e assumida pela gestão de topo, (ii) socialmente concertada, (iii) coerente, (iv) baseada na avaliação de necessidades e expectativas de saúde dos trabalhadores, (v) divulgada, conhecida e partilhada por todos, (vi) contingencial, flexível e integrada, e, por fim, (vii) orientada por custos e resultados. Segundo a Declaração do Luxemburgo (1997), a promoção da saúde engloba o esforço conjunto dos empregadores, dos trabalhadores, do Estado e da sociedade civil para melhorar a segurança, a saúde e o bem-estar no trabalho, objectivo isso que pode ser conseguido através da (i) melhoria da organização e das demais condições de trabalho, da (ii) participação efectiva e concreta dos trabalhadores bem como do seu (iii) desenvolvimento pessoal. Abstract Health at work policies: a sociological inquiry into Portuguese corporations Portuguese literature on workplace health policies, programs and activities is still scarce. With this research project the author intends (i) to improve knowledge on the Occupational Health and Safety (shortly thereafter, OSH) management systems and (ii) contribute to the development of health promotion initiatives at a corporate level. Five categories of workplace health initiatives have been identified: (i) Occupational Hygiene and Safety / Improvement of Physical Working Environment (type A programs); (ii) Health Screening, Medical Surveillance and Other Occupational Health Care Provision (type B programs); (iii) Preventing Risk Behaviours / Promoting Healthy Life Styles (type C programs); (iv) Organisational Change / Improvement of Psycho-Social Working Environment (type D programs); and (v) Industrial and Social Welfare (type E programs). A mail questionnaire was sent to the Chief Executive Officer of the 1500 largest Portuguese companies, operating in the primary and secondary sectors (≥ 100 employees) or tertiary sector (≥ 75 employees). Response rate has reached about 20% (259 respondents, representing about 300 companies). Carried out between Spring 1997 and Summer 1998, the fieldwork has encompassed two direct mailings and one phone follow-up. Sample is considered to be representative of the two thousand largest companies. One in four is a multinational. Union membership rate is about 30%, but only 16% has reported the existence of a workers’ health and safety representative. The most frequent workplace health initiatives were those under the traditional scope of the OSH field (type A and B programs) (57% of total) (e.g., Periodical Medical Examinations; Individual Protective Equipment; Assessment of Working Ability). In SMEs (< 250) it was less likely to find out some time-consuming and expensive activities (e.g., Training on OSH knowledge and skills, Improvement of environmental parameters as ventilation, lighting, heating).There were significant differences in SMEs, when compared with the larger ones (≥ 250) concerning type B programs such as Periodical medical examinations, GP consultation, Nursing care, Other medical and non-medical specialities (e.g., psychiatrist, psychologist, ergonomist, physiotherapist, occupational social worker). With regard to type C programs, there were a greater percentage of programs centred on Substance abuse (tobacco, alcohol, and drug) than on Other health risk behaviours. SMEs representatives reported very few prevention- oriented programs in the field of Drug abuse, Nutrition, Physical activity, Off- job accidents, Blood pressure or Weight control. Frequency of type D programs included Training on Human Resources Management, Training on Organisational Behaviour, Total Quality Management, Job Design/Ergonomics, and Workplace rehabilitation. In general, implementation of this type of programs (Organisational Change / Improvement of Psychosocial Working Environment) is not largely driven by health considerations. Concerning Industrial and Social Welfare (Type E programs), the larger employers are in a better position than SMEs to offer to their employees a large spectrum of health resources and facilities (e.g., Restaurant, Canteen, Resting room, Transport, Infra-structures for physical activity, Surgery, Complementary social protection, Support to recreational and cultural activities, Magazine or newsletter, Intranet). Other workplace health promotion programs like Training on Stress Management, Employee Assistance Programs, or Self-help groups are uncommon in the Portuguese worksites. The existence of integrated OSH management systems, not the company size, is the main variable explaining the implementation of more active and innovative workplace health policies in Portugal. The three main prompting factors reported by employers for health protection and promotion initiatives are: (i) Employee absenteeism; (ii) Productivity, quality and/or competitiveness; and (iii) Corporate culture/management philosophy. On the other hand, (i) Improved staff’s health, (ii) Improved working environment and (iii) Improved productivity, quality and/or competitiveness were the three main benefits reported by companies’ representatives, as a result of successful implementation of workplace health initiatives. (i) Lack of staff commitment; (ii) Lack of time; and (iii) Problems of co-operation and communication within company or establishment (iii) are perceived to be the main barriers companies must cope with. Asked about the main facilitating factors, these companies have pointed out the following ones: (i) Top management commitment; (ii) Corporate culture; and (iii) Sense of social responsibility. This sociological research report shows the methodological weaknesses of workplace health initiatives, carried out by Portuguese companies during the last ‘90s. In many cases, these programs and actions were not part of a corporate health strategy and policy, (i) based on the assessment of workers’ health needs and expectancies, (ii) advocated by the employer or the chief executive officer, (ii) planned and implemented with the staff consultation and participation or (iv) evaluated according to a cost-benefit analysis. In short, corporate health policy and action were still rather based on more traditional OSH approaches and should be reoriented towards Workplace Health Promotion (WHP) approach. According to the Luxembourg Declaration of Workplace Health Promotion in the European Union (1997), WHP is “a combination of: (i) improving the work organisation and environment; (ii) promoting active participation; (iii) encouraging personal development”.Résumée Politique(s) de santé au travail: une enquête sociologique aux entreprises portugaises Au Portugal on ne sait presque rien des politiques de santé au travail, adoptés par les entreprises. Avec ce projet de recherche, on veut (i) améliorer la connaissance sur les systèmes de gestion de la santé et de la sécurité au travail et, au même temps, (ii) contribuer au développement de la promotion de la santé des travailleurs. Une typologie a été usée pour identifier les politiques, programmes et actions de santé au travail: A. Amélioration des conditions de travail / Sécurité au travail; B. Médecine du travail /Santé au travail; C. Prévention des comportements de risque / Promotion de styles de vie sains; D. Interventions organisationnelles / Amélioration des facteurs psychosociaux au travail; E. Gestion de personnel et bien-être social. Un questionnaire postal a été envoyé au représentant maximum des grandes entreprises portugaises, industrielles (≥ 100 employés) ou des services (≥ 75 employés). Le taux de réponse a été environ 20% (259 répondants, concernant trois centaines d’entreprises et d’établissements). La recherche de champ, conduite du printemps 1997 à l’été 1998, a compris deux enquêtes postales et un follow-up téléphonique. L´échantillon est représentatif de la population des deux miles plus grandes entreprises. Un quart sont des multinationales. Le taux de syndicalisation est d’environ 30%. Toutefois, il y a seulement 16% de lieux de travail avec des représentants du personnel pour la santé et sécurité au travail. Les initiatives de santé au travail les plus communes sont celles concernant le domaine plus traditionnel (types A et B) (57% du total): par exemple, les examens de médecine du travail, l’équipement de protection individuelle, les tests d’aptitude au travail. En ce qui concerne les programmes de type C, les plus fréquents sont le contrôle et la prévention des addictions (tabac, alcool, drogue). Les interventions dans le domaine de du système technique et organisationnelle du travail peuvent comprendre les courses de formation en gestion de ressources humaines ou en psychosociologie des organisations, l’ergonomie, le travail posté ou la gestion de la qualité totale. En général, la protection et la promotion de la santé des travailleurs ne sont pas prises en considération dans l’implémentation des initiatives de type D. Il y a des différences quand on compare les grandes entreprises et les moyennes en matière de politique de gestion du personnel e du bien-être (programmes de type E, y compris l’allocation de ressources humaines ou logistiques comme, par exemple, restaurant, journal d’entreprise, transports, installations et équipements sportifs). D’autres activités de promotion de la santé au travail comme la formation en gestion du stress, les programmes d’ assistance aux employés, ou les groupes de soutien et d’auto-aide sont encore très peu fréquents dans les entreprises portugaises. C’est le système intégré de gestion de la santé et de la sécurité au travail, et non pas la taille de l’entreprise, qui aide à prédire l’existence de politiques actives et innovatrices dans ce domaine. Les trois facteurs principaux qui encouragent les actions de santé (prompting factors, en anglais) sont (i) l’absentéisme (y compris la maladie), (ii) les problèmes liés à la productivité, qualité et/ou la compétitivité, et aussi (iii) la culture de l’entreprise/philosophie de gestion. Du coté des bénéfices, on a obtenu surtout l’amélioration (i) de la santé du personnel, (ii) des conditions de travail, et (iii) de la productivité, qualité et/ou compétitivité.Les facteurs qui facilitent les actions de santé au travail sont (i) l’engagement de la direction, (ii) la culture de l’entreprise, et (iii) le sens de responsabilité sociale. Par contre, les obstacles à surmonter, selon les organisations qui ont répondu au questionnaire, seraient surtout (i) le manque d’engagement des travailleurs et de leur représentants, (ii) le temps insuffisant, et (iii) les problèmes de articulation/communication au niveau interne de l’entreprise/établissement. Ce travail de recherche sociologique montre la faiblesse méthodologique des services et activités de santé et sécurité au travail, mis en place par les entreprises portugaises dans les années de 1990, à la suite des accords de concertation sociale de 1991. Dans beaucoup de cas, (i) ces politiques de santé ne font pas partie encore d’un système intégré de gestion, (ii) il n’a pas d’évaluation des besoins et des expectatives des travailleurs, (iii) c’est très bas ou inexistant le niveau de participation du personnel, (iv) on ne fait pas d’analyse coût-bénéfice. On peut conclure que les politiques de santé au travail sont plus proches de la médecine du travail et de la sécurité au travail que de la promotion de la santé des travailleurs. Selon la Déclaration du Luxembourg sur la Promotion de la Santé au Lieu de Travail dans la Communauté Européenne (1997), celle-ci « comprend toutes les mesures des employeurs, des employés et de la société pour améliorer l'état de santé et le bien être des travailleurs » e « ceci peut être obtenu par la concentration des efforts dans les domaines suivants: (i) amélioration de l'organisation du travail et des conditions de travail ; (ii) promotion d'une participation active des collaborateurs ; (iii) renforcement des compétences personnelles ».

InOx thin films deposited by plasma assisted evaporation: application in light shutters

An integration of undoped InOx and commercial ITO thin films into laboratory assembled light shutter devices is made. Accordingly, undoped transparent conductive InOx thin films, about 100 nm thick, are deposited by radiofrequency plasma enhanced reactive thermal evaporation (rf-PERTE) of indium teardrops with no intentional heating of the glass substrates. The process of deposition occurs at very low deposition rates (0.1-0.3 nm/s) to establish an optimized reaction between the oxygen plasma and the metal vapor. These films show the following main characteristics: transparency of 87% (wavelength, lambda = 632.8 nm) and sheet resistance of 52 Omega/sq; while on commercial ITO films the transparency was of 92% and sheet resistance of 83 Omega/sq. The InOx thin film surface characterized by AFM shows a uniform grain texture with a root mean square surface roughness of Rq similar to 2.276 nm. In contrast, commercial ITO topography is characterized by two regions: one smoother with Rq similar to 0.973 nm and one with big grains (Rq similar to 3.617 nm). For the shutters assembled using commercial ITO, the light transmission coefficient (Tr) reaches the highest value (Tr-max) of 89% and the lowest (Tr-min) of 1.3% [13], while for the InOx shutters these values are 80.1% and 3.2%, respectively. Regarding the electric field required to achieve 90% of the maximum transmission in the ON state (E-on), the one presented by the devices assembled with commercial ITO coated glasses is 2.41 V/mu m while the one presented by the devices assembled with InOx coated glasses is smaller, 1.77 V/mu m. These results corroborate the device quality that depends on the base materials and fabrication process used. (C) 2014 Elsevier Ltd. All rights reserved.

Automated design of microwave discrete tuning differential capacitance circuits in Si-integrated technologies

A genetic algorithm used to design radio-frequency binary-weighted differential switched capacitor arrays (RFDSCAs) is presented in this article. The algorithm provides a set of circuits all having the same maximum performance. This article also describes the design, implementation, and measurements results of a 0.25 lm BiCMOS 3-bit RFDSCA. The experimental results show that the circuit presents the expected performance up to 40 GHz. The similarity between the evolutionary solutions, circuit simulations, and measured results indicates that the genetic synthesis method is a very useful tool for designing optimum performance RFDSCAs.

Cartografia de ocupação do solo com imagens MERIS: uma abordagem exploratória com classificação não assistida

Dissertação apresentada como requisito parcial para a obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Fabrication of the three-dimensional dendritic Ni-Co films by electrodeposition on stainless steel substrates

Co-deposition of nickel and cobalt was carried out on austenitic stainless steel (AISI 304) substrates by imposing a square waveform current in the cathodic region. The innovative procedure applied in this work allows creating a stable, fully developed, and open porous three-dimensional (3D) dendritic structure, which can be used as electrode for redox supercapacitors. This study investigates in detail the influence of the applied current density on the morphology, mass, and chemical composition of the deposited Ni-Co films and the resulting 3D porous network dendritic structure. The morphology and the physicochemical composition were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (W). The electrochemical behavior of the materials was evaluated by cyclic voltammetry (CV). The results highlight the mechanism involved in the coelectrodeposition process and how the lower limit current density tailors the film composition and morphology, as well as its electrochemical activity.

Optical nonlinearity in Tandem SI-C photodetectors

The behavior of tandem pin heterojunctions based on a-SiC: H alloys is investigated under different optical and electrical bias conditions. The devices are optimized to act as optically selective wavelength filters. Depending on the device configuration (optical gaps, thickness, sequence of cells in the stack structure) and on the applied voltage (positive or negative) and optical bias (wavelength, intensity, frequency) it is possible to combine the wavelength discrimination function with the self amplification of the signal. This wavelength nonlinearity allows the amplification or the rejection of a weak signal-impulse. The device works as an active tunable optical filter for wavelength selection and can be used as an add/drop multiplexer (ADM) which enables data to enter and leave an optical network bit stream without having to demultiplex the stream. Results show that, even under weak transient input signals, the background wavelength controls the output signal. This nonlinearity, due to the transient asymmetrical light penetration of the input channels across the device together with the modification on the electrical field profile due to the optical bias, allows tuning an input channel without demultiplexing the stream. This high optical nonlinearity makes the optimized devices attractive for the amplification of all optical signals. Transfer characteristics effects due to changes in steady state light, control d.c. voltage and applied light pulses are presented. Based on the experimental results and device configuration an optoelectronic model is developed. The transfer characteristics effects due to changes in steady state light, dc control voltage or applied light pulses are simulated and compared with the experimental data. A good agreement was achieved.

Exposição profissional a chumbo : utilização da protoporfirina-zinco (PPZ) na vigilância de saúde de trabalhadores ex

Resumo Uma estratégia de avaliação e prevenção de riscos na exposição a agentes químicos deve ter sempre em conta que a vigilância do ambiente de trabalho e a da saúde dos trabalhadores são aspectos complementares de uma mesma realidade – os riscos resultantes da interacção entre um agente químico e os trabalhadores a ele expostos. Se à Vigilância Ambiental compete apreciar o risco, pela caracterização do agente no ambiente de trabalho, a Vigilância Biológica pronuncia-se sobre a interacção entre o tóxico e o organismo, avaliando a resposta à agressão química e a evolução das reacções de adaptação ou de desajuste face à absorção do tóxico. Os Indicadores Biológicos, deste modo, assumem um estatuto de instrumento privilegiado na vigilância da saúde dos trabalhadores expostos, na medida em que medem a quantidade de tóxico que efectivamente penetrou e foi absorvido, ou o resultado (efeito) determinado por essa mesma dose. O presente estudo procura contribuir para a definição de um quadro metodológico de utilização dos Indicadores Biológicos na avaliação/gestão da exposição profissional ao chumbo, designadamente apreciando a variação da protoporfirina-zinco (PPZ), indicador até ao presente ainda não utilizado em Portugal. O chumbo é um metal de ocorrência natural, cujos níveis nos diversos ecossistemas resultam, principalmente, das actividades antropogénicas de natureza doméstica e industrial. A sua capacidade poluente é assinalável, representando uma fonte de exposição permanente para o homem, demonstrável pela sua constante presença no organismo apesar de não desempenhar qualquer tipo de função fisiológica. São actualmente inúmeras as suas aplicações, tornando a exposição profissional ao chumbo uma realidade vasta: indústrias de acumuladores eléctricos, de vidros, de plásticos e de munições, construção civil, manutenção e reparação automóvel e de navios, fabrico de tintas, indústrias electrónicas, fundições e actividades de soldadura são, entre outras, situações onde é uma realidade a ter em conta. A penetração dos compostos inorgânicos de chumbo no organismo efectua-se principalmente por via respiratória, não sendo, no entanto, desprezável, a sua penetração por via digestiva. As partículas absorvidas são transportadas pelo sangue principalmente ligadas aos eritrocitos (95%), distribuem-se pelos tecidos moles e depositam-se essencialmente no tecido ósseo, onde representam mais de 90% da carga corporal do total absorvido e tendo aí um elevado tempo de semi-vida (mais de 20 anos). Não é metabolizado no organismo e a sua eliminação efectua-se essencialmente por via renal,sendo igualmente excretado, em menor escala, através das fezes, do suor, da saliva, das faneras e do leite materno. O conhecimento científico evidencia que concentrações sanguíneas de chumbo entre 20 e 50 mg/dL são susceptíveis de determinar efeitos adversos no homem, podendo ser afectados o sistema hematopoiético, o sistema nervoso, o sistema cardiovascular, o sistema reprodutor e o sistema imunitário. Contudo, ainda muito há a clarificar no âmbito da toxicidade do chumbo. Os níveis de exposição a que correspondem as alterações nos diversos órgãos e sistemas continuam a ser motivo de alguma controvérsia. As características carcinogénicas e mutagénicas do chumbo são, ainda, um campo de vasta exigência de investigação. A intoxicação por chumbo e seus sais (Saturnismo) de origem ocupacional é reconhecida em Portugal como doença profissional (grupo 1 - Doenças Provocadas por Agentes Químicos, da Lista das Doenças Profissionais). É uma intoxicação do tipo crónico, fruto da absorção contínua de doses relativamente pequenas durante longo período, evidenciando-se no seu início por sinais e sintomas vagos e difusos de grande inespecificidade, que podem incluir, nomeadamente, perda de apetite, sabor metálico na boca, palidez, mal-estar e fadiga, cefaleias, mialgias e artralgias, irritabilidade, tremores finos, obstipação, cólicas abdominais, insónias, déficit da memória de curto prazo e da capacidade de concentração. Um importante conjunto de indicadores biológicos pode ser utilizado na vigilância periódica da saúde de trabalhadores nestas condições de exposição. Tais indicadores (de dose ou de efeito), encerram diferentes significados e comportam distintas exigências, competindo ao Médico do Trabalho, no âmbito dos programas de prevenção dos efeitos adversos relacionados com a exposição profissional a chumbo, seleccionar a sua utilização e interpretar a sua informação, de modo a avaliar a interacção do tóxico com o organismo numa fase de reversibilidade. O presente estudo envolveu 180 trabalhadores dos quais 110 apresentavam plumbémias (Pb-S) iguais ou superiores a 40 mg/dL. Além da Pb-S, a todos foi doseada a protoporfirina-zinco (PPZ) e efectuado o Hemograma e a cerca de 25% foi determinada a concentração do ácido d-aminolevulínico urinário (ALA-U). Os doseamentos da PPZ efectuados em amostra de sangue capilar através de um hematofluorímetro portátil revelaram-se de total fiabilidade, dando significado a uma técnica de fácil execução e baixo custo. A avaliação do tipo de colheita urinária para doseamento do ALA-U concluiu pela necessidade de recurso a urinas de 24 horas.Os resultados do estudo evidenciaram uma elevada associação entre a PPZ e a Pb-S, com uma maior magnitude e de início mais precoce do que o que registado na associação da Pb-S com o ALA-U. Revelaram, ainda, fracos níveis de associação da hemoglobina (e outros parâmetros hematológicos) com a Pb-S. E demonstraram para um cut-off de 100 mg/ dL de PPZ, taxa de falsos negativos e falsos positivos, para plumbémias a partir de 70 mg/dL, inferiores a 20%. Assim, concluiu-se que, nos protocolos de vigilância de saúde de trabalhadores expostos a chumbo, o doseamento da PPZ por hematofluorímetro, em sangue de colheita capilar, é adequado, fiável e de realização preferencial em relação ao do ALA-U. Concluiu-se, também, que a realização do hemograma apenas se justifica em situações individuais que clinicamente o tornem aconselhável. E que estes protocolos devem incluir a realização da Pb-S e da PPZ, podendo, em situações de controlo rigoroso (ambiental, biológico e clínico), basear-se apenas na determinação da PPZ reservando os outros indicadores para aprofundar a investigação médica nos casos de taxas elevadas desta ou de situações limitantes. ■ Résumée Une stratégie d’évaluation et de prévention des risques d’exposition aux agents chimiques doit toujours tenir en considération que la vigilance du lieu de travail et de la santé des travailleurs sont des aspects complémentaires d’une même réalité – les risques résultant d’une interaction entre l’agent chimique et les travailleurs exposés. Si c’est à la Vigilance Ambiantale de juger le risque, par la caractérisation de l’agent dans le lieu de travail, la Vigilance Biologique, elle, se prononce sur l’interaction entre le toxique et l’organisme, évaluant la réponse à l’agression chimique et l’évolution des réactions d’adaptation ou de rupture face à l’absorption du toxique. Les Indicateurs Biologiques assument ainsi un statut d’instrument privilégié de vigilance de la santé des travailleurs exposés, dans la mesure où ils déterminent la quantité de toxique qui a effectivement été pénétré et absorbé, ou le résultat (effet) déterminé par cette dose. Cette étude-ci cherche à contribuer à la définition d’un cadre méthodologique d’utilisation des Indicateurs Biologiques dans l’évaluation/ gestion de l’exposition professionnelle au plomb inorganique, évaluant spécialement le comportement de la protoporphirine-zinc (PPZ), indicateur pas encore utilisé au Portugal.Le plomb est un métal d’occurrence naturelle dont les niveaux dans les différents écosystèmes en résultent, principalement, des activités anthropogéniques de nature domestique et industrielle. Sa capacité polluante peut être signalée, représentant une source d’exposition permanente pour l’homme, celle-ci démontrable par sa présence continue dans l’organisme, même si elle n’y accomplit aucune fonction physiologique. Actuellement ses applications sont innombrables, faisant de l’exposition professionnelle au plomb une réalité de grande ampleur : industries d’accumulateurs électriques, de verre, de plastique et de munitions, bâtiments, manutention et réparation automobile et navale, fabrication d’encres, industries électroniques, fontes et activités de soudure sont, entre autres, des situations réelles a en tenir compte. La pénétration du plomb inorganique dans l’organisme se fait principalement par voie respiratoire, pouvant se faire également par voie digestive. Les particules absorbées sont transportées par le sang, surtout liées aux érythrocytes (95%), se repartent à travers les tissus mous et se déposent essentiellement dans le tissu osseux, où elles représentent plus de 90% de la charge corporelle de ce qui a été absorbé et ont un temps de demi-vie élevé (plus de 20 ans). Le plomb n’est pas métabolisé dans l’organisme et son élimination se fait essentiellement par voie rénale, pouvant tout de même, à une moindre échelle, être excrété dans les fèces, de la sueur, de la salive, des ongles, des cheveux et du lait maternel. La connaissance scientifique met en évidence que des concentrations sanguines de plomb entre 20 et 50 mg/dL sont susceptibles de déterminer des effets adverses dans l’homme, pouvant les systèmes hématopoïétique, nerveux, cardiovasculaire, reproducteur et immunitaire en être affectés. Cependant, il en reste beaucoup à éclaircir dans le domaine de la toxicité du plomb. Les niveaux d’exposition auxquels correspondent les modifications des divers organes et systèmes, demeurent toujours sujet de quelque controverse. Les caractéristiques carcinogèniques et mutagèniques du plomb restent toujours un champ d’investigation d’une grande exigence. L’intoxication par le plomb et ses sels (Saturnisme) d’origine occupationnelle est reconnue, au Portugal, comme une maladie professionnelle (groupe 1- Maladies Provoquées par des Agents Chimiques, de la Liste des Maladies Professionnelles). C’est une intoxication du tipe chronique, due à l’absorption continue de doses relativement petites pendant une longue période, mise en évidence à travers des signes et des symptômes vagues et diffus sans grande spécificité, lesquels peuvent inclure, particulièrement, le manque d’appétit, goût métallique dans la bouche, pâleur, malaise et fatigue, céphalées, myalgies et arthralgies, irritabilité, tremblements fins, constipation, coliques abdominales, insomnies, déficit de la mémoire à court terme et de la capacité de concentration.Un ensemble important d’indicateurs biologiques peut être employé dans la vigilance périodique de la santé des travailleurs dans ces conditions d’exposition. Ces indicateurs (de dose ou d’effet) renferment différentes significations et comportent diverses exigences, devant le Médecin de Travail, dans le domaine des programmes de prévention des effets adverses qui sont en relation avec l’exposition professionnelle au plomb, sélectionner son utilisation et interpréter son information de façon à évaluer l’interaction de l’élément toxique avec l’organisme à un stade de réversibilité. L’étude ci-présent engloba 180 travailleurs desquels 110 présentaient des plombémies (Pb-S) égales ou supérieures à 40 mg/dL. À part la Pb-S, la protoporphyrine-zinc (PPZ) leur a été prise en dosage et un Hémogramme fut effectué et fut déterminé l’acide d- aminolévulinique urinaire (ALA-U) sur environ 25% des travailleurs. Le dosage de la PPZ efectué en échantillon de sang capillaire par un fluorimètre portable, s’est accomplit d’une fiabilité total, donnant du sgnificat à une téchnique de facile execution et bas prix. L’évaluation de la prise urinaire par dosage du ALA-U conclut au besoin d’un recours aux urines de 24 heures Les résultats de l’étude ont mis en évidence une association élevée entre la PPZ et la Pb- S, avec une intensité majeure et de début plus précoce par rapport à celui qui fut registré lors de l’association de la Pb-S avec la ALA-U. Ces résultats ont également montré de faibles niveaux d’association entre l’hémoglobine (et autres paramètres hématologiques) et la Pb-S. Ils ont démontré aussi, une valeur de cut-off de 100 mg/dL de PPZ, des taux de faux négatifs et faux positifs, pour des plombémies de 70 mg/dL, inférieurs à 20%. On peut donc conclure que dans les protocoles de vigilance de la santé des travailleurs exposés au plomb, le dosage de la PPZ par fluorimetrie dans le sang capillaire est adéquat, fiable et de réalisation préférentielle par rapport à celui du ALA-U. On peut également conclure que la réalisation de l’hémogramme ne se justifie que dans les cas individuels où, cliniquement, celui-ci est conseillé. De plus, ces protocoles doivent inclure la réalisation de la Pb-S et de la PPZ, pouvant, en cas de contrôle rigoureux (ambiantal, biologique et clinique), s’appuyer que dans la détermination de la PPZ réservant les autres indicateurs pour approfondir l’investigation médicale dans les cas où les taux de celle-ci sont élevés ou dans les cas de situations limitantes. ■ Summary Any strategy to evaluate and prevent the risks of chemical agents exposure must always regard the work environment and workers health as complementary aspects of one reality - the resulting risks from the interaction between the chemical agent and the exposed workers. It is the responsibility of Environmental Monitoring to evaluate the risks of exposure by the characterization of the chemical agent in the work environment. Biological Monitoring, on the other hand, pronounces itself over the toxin and body interaction, evaluating human response to the chemical aggression and the body adaptations to the toxic absorption. Biological Exposure Indices (BEI) assume, therefore, a privileged status among exposed workers' health monitoring instruments, as they measure the actual penetrated and absorbed toxic quantity and the effect it produces. This research study aims to contribute to the definition of a methodological strategy on the utilization of BEI’s in evaluating inorganic lead's occupational exposure, more specifically appreciating the zinc protoporphyrin (ZPP) variation, an index that has never been taken under consideration in Portugal until now. Lead is a natural metal whose ecosystem’s levels are mainly due to domestic and industrial anthropogenic activities. Its pollutant capacity is notable, representing a permanent exposure risk shown by its constant presence in the human body, although it has no physiologic function. Nowadays, lead's applications are countless, turning its professional exposure a huge reality: storage batteries industries, glass industries, plasterers and munitions industries, building construction, ships and motor car maintenance and repairing, ink manufacture, electronics industries, foundries and other soldering activities are, among so many other, realities to attend to. Respiration is the main cause of human body's inorganic lead absorption, although digestive pathway must not to be ignored. The absorbed particles are transported by blood, essentially bounded to erythrocytes (95%). It is distributed by soft tissues and settled mainly on bone tissues, where it represents approximately 90% of the total body charge and has a high half-life time (more than 20 years). It is not metabolized by the organism, its elimination being effectuated by renal activity and, in smaller scale, through lees, sweat, saliva, nails, hair and maternal milk.Scientific knowledge shows that concentrations of lead in blood between 20 e 50 mg/dL are susceptible to determine adverse effects in man and able to affect the hematopoietic system, the nervous system, the cardiovascular system, the reproductive system and the immunological system. Nevertheless, there's still much to be learned and clarified about lead's toxicity. The correlation between exposure levels and human's systems and organs alteration levels continues to be a centre of controversies. Still, lead's carcinogenic and mutagenic characteristics continue to be a high demanding research field. Intoxication by lead and its compounds (saturnism), from occupational origin, is recognized in Portugal as an occupational disease, included in Group 1 - Chemical Agents Caused Diseases, on the Occupational Diseases List. It is a chronic intoxication caused by a continuous absorption of small doses, throughout a long period of time. Its signs and symptoms are diffuse and imprecise, of great unspecificity, such as loss of appetite, metallic flavor in the mouth, paleness, ailment and fatigue, headaches, myalgia and arthralgia, irritability, thin tremors, constipation, abdominal pain, insomnias, short memory loses and inability to concentrate. A considered number of BEI’s can be used in Periodic Health Monitoring of workers in such exposure conditions. Such BEI (dose indices or effect indices) provide different meanings and imply different procedures, being Occupational Doctors responsibility, in the context of lead related adverse effects preventive programmes, to select and interpret its information, in order to evaluate the interaction between toxic and organism in a reversible phase of the toxic action. The present research study involved 180 workers, 110 of which presented blood lead levels (PbB) above or equal to 40 mg/dL. Besides PbB, all workers has been evaluated for zinc protoporphyrin levels (PPZ) and submitted to a haemogram. About 25% of the workers were selected for d-aminolevulinic urinary acid (ALA-U) determination. The evaluation of PPZ, by a portable hematofluorometer using capillary blood samples, turned out to be an easy procedure with low costs and total warrantability. As in regard for ALA- U procedure, it was concluded the necessity of 24 hours urine samples. This research results underlined a strong connection between ZPP and PbB, which was found to to be stringer and to begin earlier than it was registered for PbB and ALA-U association. The same study also revealed a low association level between PbB and hemoglobin or other hematological indices. It was also verified less than 20% of false negatives and false positives cases when admitted a ZPP 100 mg/dL cut off value for PbB³ 70 mg/dL. As in result it was concluded that in Health Monit

High-performance flexible hybrid field-effect transistors based on cellulose fiber paper

IEEE Electron Device Letters, VOL. 29, NO. 9,

Avaliação de antígenos do Trypanosoma Cruzi para a reação de hem aglutinação indireta: I. diferentes extratos antigênicos

Alguns procedimentos descritos na literatura (ultrasom, água destilada, NaOH, TRITON x 100 e congelamento-descongelamenao) foram avaliados determinando o melhor extrato antigênico para a reação de hemaglutinação indireta (RHI) no diagnóstico sorológico da doença de Chagas. Para isso, foram ensaiados 30 soros de indivíduos chagásicos e 30 soros de indivíduos não chagásicos. A reação de imuno-fluorescência indireta foi considerada como reação de referência no cálculo dos indices de co-positividade (i.c.p.) e co-negatividade (i.cn.). O valor do i.c.p, para a RHI com antígeno obtido por NaOH foi mais elevado do que para os outros antígenos. Os cinco antígenos apresentaram valores máximos para o i.cn., indicando boa especificdade. Os títulos apresentados pelos soros chagásicos com antígeno obtido por NaOH foram, significativamente, superiores aos demais antígenos. A avaliação de cinco partidas de antígeno extraídas por NaOH em épocas diversas indicam boa sensibilidade, especificidade e reprodutibilidade de resultados, traduzidas pelos valores elevados para os i.c.p. e i.cn., além de títulos próximos entre si.

100 Años de desarrollo de la teoría financiera : situación actual y previsible evolución tras la crisis : resumen de la ponencia

"Las Finanzas, como disciplina académica, nacen a caballo entre los siglos XIX y XX. Sin duda el importante desarrollo industrial de la época y la necesidad de empresas de mayores dimensiones llevaron a un creciente interés por las concentraciones empresariales como fusiones y adquisiciones. También aumentó el interés por los mercados donde se financiaban estas empresas cada vez mayores. Y esto, aunque sucedía en diversas partes del mundo, estaba ocurriendo de forma especial en Estados Unidos, de manera que allí fue donde nacieron las finanzas, y donde se han seguido desarrollando. De esta manera, desde un comienzo, las finanzas tienen un claro sello anglosajón." [introdução]

Growth of the [110] oriented TiO2 nanorods on ITO substrates by sputtering technique for dye-sensitized solar cells

TiO2 films have been deposited on ITO substrates by dc reactive magnetron sputtering technique. It has been found that the sputtering pressure is a very important parameter for the structure of the deposited TiO2 films. When the pressure is lower than 1 Pa, the deposited has a dense structure and shows a preferred orientation along the [101] direction. However, the nanorod structure has been obtained as the sputtering pressure is higher than 1 Pa. These nanorods structure TiO2 film shows a preferred orientation along the [110] direction. The x-ray diffraction and the Raman scattering measurements show both the dense and the nanostructure TiO2 films have only an anatase phase, no other phase has been obtained. The results of the SEM show that these TiO2 nanorods are perpendicular to the ITO substrate. The TEM measurement shows that the nanorods have a very rough surface. The dye-sensitized solar cells (DSSCs) have been assembled using these TiO2 nanorod films prepared at different sputtering pressures as photoelectrode. And the effect of the sputtering pressure on the properties of the photoelectric conversion of the DSSCs has been studied.