Metallocene ethylene-1-octene copolymers:influence of comonomer content on thermo-mechanical, rheological, and thermo-oxidative behaviours before and after melt processing in an internal mixer

The influence of the comonomer content in a series of metallocene-based ethylene-1-octene copolymers (m-LLDPE) on thermo-mechanical, rheological, and thermo-oxidative behaviours during melt processing were examined using a range of characterisation techniques. The amount of branching was calculated from 13C NMR and studies using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) were employed to determine the effect of short chain branching (SCB, comonomer content) on thermal and mechanical characteristics of the polymer. The effect of melt processing at different temperatures on the thermo-oxidative behaviour of the polymers was investigated by examining the changes in rheological properties, using both melt flow and capillary rheometry, and the evolution of oxidation products during processing using infrared spectroscopy. The results show that the comonomer content and catalyst type greatly affect thermal, mechanical and oxidative behaviour of the polymers. For the metallocene polymer series, it was shown from both DSC and DMA that (i) crystallinity and melting temperatures decreased linearly with comonomer content, (ii) the intensity of the ß-transition increased, and (iii) the position of the tan δmax peak corresponding to the a-transition shifted to lower temperatures, with higher comonomer content. In contrast, a corresponding Ziegler polymer containing the same level of SCB as in one of the m-LLDPE polymers, showed different characteristics due to its more heterogeneous nature: higher elongational viscosity, and a double melting peak with broader intensity that occurred at higher temperature (from DSC endotherm) indicating a much broader short chain branch distribution. The thermo-oxidative behaviour of the polymers after melt processing was similarly influenced by the comonomer content. Rheological characteristics and changes in concentrations of carbonyl and the different unsaturated groups, particularly vinyl, vinylidene and trans-vinylene, during processing of m-LLDPE polymers, showed that polymers with lower levels of SCB gave rise to predominantly crosslinking reactions at all processing temperatures. By contrast, chain scission reactions at higher processing temperatures became more favoured in the higher comonomer-containing polymers. Compared to its metallocene analogue, the Ziegler polymer showed a much higher degree of crosslinking at all temperatures because of the high levels of vinyl unsaturation initially present.

Reactive processing of polymers:functionalisation of ethylene-propylene diene terpolymer (EPDM) in the presence and absence of a co-agent and effect of functionalised EPDM on compatibilisation of poly(ethylene terephthalate)/EPDM blends

Ethylene-propylene diene terpolymer (EPDM) was functionalized with glycidyl methacrylate (GMA) during melt processing by free radical grafting with peroxide initiation in the presence and absence of a reactive comonomer trimethylolpropane triacrylate (Tris). Increasing the peroxide concentration resulted in an increase in the GMA grafting yield, albeit the overall grafting level was low and was accompanied by higher degree of crosslinking of EPDM which was found to be the major competing reaction. The presence of Tris in the grafting system gave rise to higher grafting yield produced at a much lower peroxide concentration though the crosslinking reactions remained high but without the formation of GMA-homopolymer in either of the two systems. The use of these functionalized EPDM (f-EPDM) samples with PET as compatibilisers in binary and ternary blends of PET/EPDM/f-EPDM was evaluated. The influence of the different functionalisation routes of the rubber phase (in presence and absence of Tris) and the effect of the level of functionality and microstructure of the resultant f-EPDM on the extent of the interfacial reaction, morphology and mechanical properties was also investigated. It is suggested that the mechanical properties of the blends are strongly influenced by the performance of the graft copolymer, which is in turn, determined by the level of functionality, molecular structure of the functionalized rubber and the interfacial concentration of the graft copolymer across the interface. The cumulative evidence obtained from torque rheometry, scanning electron microscopy, SEM, dynamic mechanical analysis (DMA), tensile mechanical tests and Fourier transform infrared (FTIR) supports this. It was shown that binary and ternary blends prepared with f-EPDM in the absence of Tris and containing lower levels of g-GMA effected a significant improvement in mechanical properties. This increase, particularly in elongation to break, could be accounted for by the occurrence of a reaction between the epoxy groups of GMA and the hydroxyl/carboxyl end groups of PET that would result in a graft copolymer which could, most probably, preferentially locate at the interface, thereby acting as an 'emulsifier' responsible for decreasing the interfacial tension between the otherwise two immiscible phases. This is supported by results from FTIR analysis of the fractionated PET phase of these blends which confirm the formation of an interfacial reaction, DMA results which show a clear shift in the T s of the blend components and SEM results which reveal very fine morphology, suggesting effective compatibilisation that is concomitant with the improvement observed in their tensile properties. Although Tris has given rise to highest amount of g-GMA, it resulted in lower mechanical properties than the optimized blends produced in the absence of Tris. This was attributed to the difference in the microstructure of the graft and the level of functionality in these samples resulting in less favourable structure responsible for the coarser dispersion of the rubber phase observed by SEM, the lower extent of T shift of the PET phase (DMA), the lower height of the torque curve during reactive blending and FTIR analysis of the separated PET phase that has indicated a lower extent of the interfacial chemical reaction between the phases in this Tris-containing blend sample. © 2005 Elsevier Ltd. All rights reserved.

Cerebellar morphology in developmental dyslexia

Recent evidence has suggested cerebellar anomalies in developmental dyslexia. Therefore, we investigated cerebellar morphology in subjects with documented reading disabilities. We obtained T1-weighted magnetic resonance images in the coronal and sagittal planes from 11 males with prior histories of developmental dyslexia, and nine similarly-aged male controls. Proton magnetic resonance spectra (TE=136 ms, TR=2.4 s) were obtained bilaterally in the cerebellum. Phonological decoding skill was measured using non-word reading. Handedness was assessed using both the Annett questionnaire of hand preference and Annett’s peg moving task. Cerebellar symmetry was observed in the dyslexics but there was significant asymmetry (right grey matter>left grey matter) in controls. The interpretation of these results depended whether a motor- or questionnaire-based method was used to determine handedness. The degree of cerebellar symmetry was correlated with the severity of dyslexics’ phonological decoding deficit. Those with more symmetric cerebella made more errors on a nonsense word reading measure of phonological decoding ability. Left cerebellar metabolite ratios were shown to correlate significantly with the degree of cerebellar asymmetry (P<0.05) in controls. This relationship was absent in developmental dyslexics. Cerebellar morphology reflects the higher degree of symmetry found previously in the temporal and parietal cortex of dyslexics. The relationship of cerebellar asymmetry to phonological decoding ability and handedness, together with our previous finding of altered metabolite ratios in the cerebellum of dyslexics, lead us to suggest that there are alterations in the neurological organisation of the cerebellum which relate to phonological decoding skills, in addition to motor skills and handedness.

Tobacco use prevention education (TUPE) programs in the state of Florida: Teachers' perceptions of program structure and effectiveness

This study described teacher perceptions of TUPE program effectiveness in Florida in an attempt to improve programs by identifying factors that might influence teacher motivation and performance. Very little work has been done to examine how teachers' perceptions are related to the effectiveness of TUPE programs. A statewide survey provided information about how teachers' perceptions of program effectiveness are affected by variables such as: program structure, barriers, tobacco use norms, and training variables. Data were obtained from a telephone survey conducted in Florida as part of the Tobacco Pilot Project (TPP). The sample included 296 middle school teachers and 282 high school teachers as well as 193 middle school principals and 190 high school principals. Correlational and hierarchical regression analyses identified correlates and predictors of teachers' ratings of effectiveness. Results suggest that use of peer leaders, more frequent evaluations, a higher degree of parent involvement, fewer barriers, greater student interest, and lower tolerance for tobacco use were correlated with higher ratings of program effectiveness. Furthermore, student interest, peer, staff, and community tolerance norms, peer leaders, program evaluation, and parent involvement predicted middle school teachers' perceptions. Parent tolerance, student interest, number of barriers, and more frequent program evaluation predicted high school teachers' perceptions. In addition, middle school teachers who reported a lower number of factors negatively associated with teacher receptivity were more likely to view TUPE programs more favorably than teachers who reported a greater number of these risk factors. This relationship was not as robust among the high school teacher sample. Differences between the middle and high school sample were found in the magnitude and number of significant correlations, the proportion of variance accounted for by predictor variables, and the strength of the relationship between the number of factors negatively associated with teacher receptivity and teachers' perceptions of TUPE effectiveness. These findings highlighted the importance of the timing, program features, and the external environment for enhancing or minimizing teachers' ratings of TUPE program effectiveness. In conclusion, significant increases in TUPE teachers' self-efficacy will occur through the participation of peers, parents, staff, and community leaders in different aspects of TUPE programs. ^

Online Education, Accrediting Standards, and Student Success: An Examination of the Relationship Between the Southern Association of Colleges and Schools Commission on Colleges Standards for Online Education and Student Success

Prior to 2000, there were less than 1.6 million students enrolled in at least one online course. By fall 2010, student enrollment in online distance education showed a phenomenal 283% increase to 6.1 million. Two years later, this number had grown to 7.1 million. In light of this significant growth and skepticism about quality, there have been calls for greater oversight of this format of educational delivery. Accrediting bodies tasked with this oversight have developed guidelines and standards for online education. There is a lack of empirical studies that examine the relationship between accrediting standards and student success. The purpose of this study was to examine the relationship between the presence of Southern Association of Colleges and Schools Commission on College (SACSCOC) standards for online education in online courses, (a) student support services and (b) curriculum and instruction, and student success. An original 24-item survey with an overall reliability coefficient of .94 was administered to students (N=464) at Florida International University, enrolled in 24 university-wide undergraduate online courses during fall 2014, who rated the presence of these standards in their online courses. The general linear model was utilized to analyze the data. The results of the study indicated that the two standards, student support services and curriculum and instruction were both significantly and positively correlated with student success but with small R2 and strengths of association less than .35 and .20 respectively. Mixed results were produced from Chi-square tests for differences in student success between higher and lower rated online courses when controlling for various covariates such as discipline, gender, race/ethnicity, GPA, age, and number of online courses previously taken. A multiple linear regression analysis revealed that the curriculum and instruction standard was the only variable that accounted for a significant amount of unique variance in student success. Another regression test revealed that no significant interaction effect exists between the two SACSCOC standards and GPA in predicting student success. The results of this study are useful for administrators, faculty, and researchers who are interested in accreditation standards for online education and how these standards relate to student success.

School desegregation in Broward County, Florida 1970-1998 : a historical study of power

This is a historical case study on school desegregation and power in Broward County, Florida from 1970 to 1998. The purpose of this study is to describe, explain and analyze types of power used by the School Board of Broward County, Florida and community activists, in their efforts to influence desegregation decisions from 1970 to 1998. In addition, this study explains who benefited and who won from the School Board's desegregation decisions and who governed those decisions? A historical case study approach was used as the method for conducting this study. Data sources included 11 interviews of individuals who were involved in school desegregation issues as either School Board officials or community activists and 10 archival data sources. The theoretical models of Russell, Galbraith, Wartenberg and Domhoff were used to determine the different types of power techniques used by School Board officials and community activists and to answer the questions: who benefited and who won from the School Board's desegregation decisions and who governed those policies and practices? The primary beneficiaries of school desegregation policies and practices in Broward County were: white, affluent communities and the builders, developers, realtors and other businesses in the western suburban communities. All of the data sources indicated that the black community did not benefit from the School Board's desegregation policies. The primary power techniques used by School Board officials to influence desegregation policies and practices was "power over opinions" and compensation. These power techniques were manifested by the School Board publicly disputing the allegations raised by community activists and by compensating those who supported and promoted the School Board's desegregation policies and practices. The power techniques primarily used by community activists were coercive force and "power over opinions." They effectively used these power techniques to change the School Board's policies and practices they felt were detrimental to black children and the black community. Based on the analysis of the qualitative data, it can be concluded that black children did not benefit from school desegregation in Broward County, Florida and the community continues to suffer residual effects from past desegregation policies and practices.

Micropartículas contendo nanopartículas de quitosana usando sulfato e genipina para liberação modificada da triancinolona: obtenção, caracterização e estudo em células tumorais

Chitosan is a polymer biocompatibility and biodegradability widely used in drug delivery systems. The co-crosslinking of chitosan with sodium sulfate and genipin, to form particulate systems is related of making them more resistant to acidic pH and to modulate the release kinetics for the oral route. Triamcinolone is a glucocorticoid with anti-inflammatory and immunosuppressive actions. The nanoparticles were prepared by co-crosslinking and characterized for particle size, PDI, zeta potential, crosslinking degree, encapsulation rate, morphology, infrared spectroscopy, thermal analysis, release kinetics and cells studies. The nanoparticles were prepared initially without genipin with sodium sulphate and the particles parameters were monitored in function of different ratio of drug / polymer, different concentrations of sodium sulfate and polysorbate 80 and the drip mode of crosslinkers on polymers. After optimizing conditions, the chosen system parameters without genipin included mean diameter of 312.20 ± 5.70 nm, PDI 0.342 ± 0.013 and zeta potential of 20.18 ± 2.28 mV. The genipin was introduced into the system analyzing different concentrations (0.5, 1.0 and 2.0 mM) and crosslinking times (3, 6, 12 and 24 h). Evaluating crosslinking time with genipin (0.5 mM) it was showed that varying the genipin reaction time the systems size ranged from 235.1 to 334.4 nm, the PDI from 0.321 to 0.392 and zeta potential 20.92 to 30.39 mV. The crosslinking degree that coud vary from 14 to 30 %. Nanoparticles without genipina, 6 h and 24 h crosslinking time were dried by spray-drying method. Analysis by scanning electron micrograph (SEM) revealed that the microparticles showed spherical morphology. The encapsulation rate was 75 ± 2.3 % using validated HPLC methodology. The infrared analysis showed chemical interactions between the components of the formulation. Thermal analysis showed that systems with a higher degree of crosslinking had a higher thermal stability. On release kinetics, increasing the degree of crosslinking was able to decrease the concentration and rate of release of triamcinolone. In studies with liver cancer cells (HepG2) and colon (HT-29), the microparticulate prepared with triamcinolone and 24 h of crosslinking with genipin showed a potential for antitumor activity in hepatic cell line HepG2. Therefore, a new delivery system for triamcinolone on polymeric nanoparticles of chitosan cocrosslinked with genipin and sodium sulfate was obtained with hepatic antitumor potential.

Spitzer power-law active galactic nucleus candidates in the chandra deep field-north

We define a sample of 62 galaxies in the Chandra Deep Field-North whose Spitzer IRAC SEDs exhibit the characteristic power-law emission expected of luminous AGNs. We study the multiwavelength properties of this sample and compare the AGNs selected in this way to those selected via other Spitzer color-color criteria. Only 55% of the power-law galaxies are detected in the X-ray catalog at exposures of >0.5 Ms, although a search for faint emission results in the detection of 85% of the power-law galaxies at the ≥2.5 σ detection level. Most of the remaining galaxies are likely to host AGNs that are heavily obscured in the X-ray. Because the power-law selection requires the AGNs to be energetically dominant in the near- and mid-infrared, the power-law galaxies comprise a significant fraction of the Spitzer-detected AGN population at high luminosities and redshifts. The high 24 μm detection fraction also points to a luminous population. The power-law galaxies comprise a subset of color-selected AGN candidates. A comparison with various mid-infrared color selection criteria demonstrates that while the color-selected samples contain a larger fraction of the X-ray-luminous AGNs, there is evidence that these selection techniques also suffer from a higher degree of contamination by star-forming galaxies in the deepest exposures. Considering only those power-law galaxies detected in the X-ray catalog, we derive an obscured fraction of 68% (2 : 1). Including all of the power-law galaxies suggests an obscured fraction of <81% (4 : 1).

Determinants of internal and external R&D offshoring: Evidence from Spanish firms

This paper analyzes the determinants of R&D offshoring of Spanish firms using information from the Panel of Technological Innovation. We find that being an exporter, international technological cooperation, continuous R&D engagement, applying for patents, being a for-eign subsidiary, and firm size are factors that positively affect the decision to offshore R&D. In addition, we find that a lack of financing is an obstacle relatively more important for inde-pendent firms than for firms that belong to business groups. For these latter, we also obtain that the factors that influence the decision to offshore R&D differ depending on whether the firm purchases the R&D services within the group or through the market: a higher degree of importance assigned to internal sources of information for innovation as compared to mar-ket sources increases (decreases) the probability of R&D offshoring only through the group (market).

Room temperature electromechanical and magnetic investigations of ferroelectric Aurivillius phase Bi5Ti3(FexMn1−x)O15 (x = 1 and 0.7) chemical solution deposited thin films

Aurivillius phase thin films of Bi5Ti3(FexMn1−x)O15 with x = 1 (Bi5Ti3FeO15) and 0.7 (Bi5Ti3Fe0.7Mn0.3O15) on SiO2-Si(100) and Pt/Ti/SiO2-Si substrates were fabricated by chemical solution deposition. The method was optimized in order to suppress formation of pyrochlore phase Bi2Ti2O7 and improve crystallinity. The structuralproperties of the films were examined by x-ray diffraction, scanning electron microscopy, and atomic force microscopy. Optimum crystallinity and pyrochlore phase suppression was achieved by the addition of 15 to 25 mol. % excess bismuth to the sols. Based on this study, 17.5 mol. % excess bismuth was used in the preparation of Bi2Ti2O7-free films of Bi5Ti3FeO15 on SrTiO3(100) and NdGaO3(001) substrates, confirming the suppression of pyrochlore phase using this excess of bismuth. Thirty percent of the Fe3+ ions in Bi5Ti3FeO15 was substituted with Mn3+ ions to form Bi2Ti2O7-free thin films of Bi5Ti3Fe0.7Mn0.3O15 on Pt/Ti/SiO2-Si, SiO2-Si(100), SrTiO3(100), and NdGaO3(001) substrates. Bi5Ti3FeO15 and Bi5Ti3Fe0.7Mn0.3O15thin films on Pt/Ti/SiO2-Si and SiO2-Si(100) substrates were achieved with a higher degree of a-axis orientation compared with the films on SrTiO3(100) and NdGaO3(001) substrates. Room temperature electromechanical and magnetic properties of the thin films were investigated in order to assess the potential of these materials for piezoelectric,ferroelectric, and multiferroic applications. Vertical piezoresponse force microscopy measurements of the films demonstrate that Bi5Ti3FeO15 and Bi5Ti3Fe0.7Mn0.3O15thin films are piezoelectric at room temperature. Room temperature switching spectroscopy-piezoresponse force microscopy measurements in the presence and absence of an applied bias demonstrate local ferroelectric switching behaviour (180°) in the films. Superconducting quantum interference device magnetometry measurements do not show any room temperature ferromagnetic hysteresis down to an upper detection limit of 2.53 × 10−3 emu; and it is concluded, therefore, that such films are not mutiferroic at room temperature. Piezoresponse force microscopy lithography images of Bi5Ti3Fe0.7Mn0.3O15thin films are presented.

10Be and barium concentrations of sediment core GeoB1008-3

Particle reactive elements are scavenged to a higher degree at ocean margins than in the open ocean due to higher fluxes of biogenic and terrigenous particles. In order to determine the influence of these processes on the depositional fluxes of 10Be and barium we have performed high-resolution measurements on sediment core GeoB1008-3 from the Congo Fan. Because the core is dominated by terrigenous matter supplied by the Congo River, it has a high average mass accumulation rate of 6.5 cm/kyr. Biogenic 10Be and Ba concentrations were calculated from total concentrations by subtracting the terrigenous components of10Be and Ba, which are assumed to be proportional to the flux of Al2O3. The mean Ba/Al weight ratio of the terrigenous component was determined to be 0.0045. The unusualy high terrigenous 10Be concentrations of 9.1 * 10**9 atoms/g Al2O3 are either due to input of particles with high10Be content by the Congo River or due to scavenging of oceanic 10Be by riverine particles. The maxima of biogenic 10Be and Ba concentrations coincide with maxima of the paleoproductivity rates. Time series analysis of the 10Be and of Ba concentration profiles reveals a strong dominance of the precessional period of 24 kyr, which also controls the rates of paleoproductivity in this core. During the maxima of productivity the flux of biogenic Ba is enhanced to a larger extent than that of biogenic 10Be. Applying a model for coastal scavenging, we ascribe the observed higher sensitivity of Ba to biogenic particle fluxes to the fact that the ocean residence time of Ba is approximately 10 times longer than that of 10Be.

Varumärkesstärkande samhällsansvar : En studie om hur CSR påverkar konsumenters attityder

Företags samhällsansvar (CSR) har utvecklats från ett fokus på etik till prestation och att således kunna fungera som ett strategiskt verktyg för differentiering och det är idag allmänt vedertaget för företag att använda sig av CSR med antagandet att detta genererar konkurrensfördelar. Samtidigt som CSR påvisats kunna skapa mervärde till ett företags varumärke ställs numera också krav från konsumenter att företag tar ett samhällsansvar. Det har däremot uppmärksammats att konsumenters medvetenhet om företags CSR-initiativ är låg, vilket kan anses problematiskt i och med de investeringar företag lägger på CSR och om detta således tas i beaktande vid konsumenters utvärdering av företag. Uppsatsens syfte är därmed att förklara om och hur CSR påverkar konsumenters attityd till ett företags varumärke samt ifall detta innebär ett mervärde och därmed varumärkesstärkande. För att uppnå syftet genomfördes en kvantitativ undersökning och enkäter skickades ut till studenter vid Högskolan Dalarna där totalt 682 respondenter slutförde enkäten. Resultaten visar en låg grad av medvetenhet, men att konsumenter med en högre grad av medvetenhet uppvisar mer fördelaktiga attityder till företag som tar ett samhällsansvar. Det framkommer också att dessa attityder genererar företag immateriella värden vilket senare teoretiskt förklaras innebära ett mervärde och därmed varumärkesstärkande. Studien landar i att CSR kan användas av företag för att stärka sitt varumärke, men finner dock en begränsning gällande konsumenters låga medvetenhet om företags CSR-initiativ.

Supportrars åsikt om samhällsansvar : En studie om supportrars attityd till samhällsansvar utöver kärnverksamheten

Corporate Social Responsibility (CSR) är i grunden ett företagsbegrepp som på senare år allt mer börjat prägla idrottsvärlden. CSR är ett samlingsbegrepp på aktiviteter som utförs för att främja samhället. Anledningarna till att idrottsföreningar väljer att engagera sig i frågor som berör samhället är många men, inom Sverige har den idrottsliga kommersialiseringen och professionaliseringen bidragit till att elitidrottsföreningar arbetar med CSR-frågor utöver kärnverksamheten. Elitidrottsföreningar skapar stort medialt intresse och supportrar är en av elitidrottsföreningarnas primära intressenter som bidrar till framgång. Alla supportrar har inte samma engagemang eller åsikter i frågor rörande föreningen. Syftet med denna studie är att undersöka svenska elitidrottsföreningars supportrars attityd till CSR-arbete utöver kärnverksamheten samt jämföra om attityden skiljer sig mellan supportrar baserat på supporteridentifikation. För att uppnå syftet gjordes en kvantitativ enkätundersökning av supportrar till Hammarby Fotboll. Av totalt 96 respondenter identifierades 44 med lägre och 52 med högre supporteridentifikation. Resultatet visade att attityden mellan respondentgrupperna skiljde sig på det sätt att den högre identifikationsgruppen lutade åt en negativ attityd samtidigt som den lägre identifikationsgruppen var neutral med en marginell negativ lutning. Studien landade i att skillnaderna var marginella och att båda grupperna tolkas neutrala vilket ger slutsatsen att CSR utöver kärnverksamheten har ringa betydelse för supportrar oavsett identifikation.

Effect of sildenafil in renal ischemia/reperfusion injury in rats

To evaluate the effect of sildenafil, administered prior to renal ischemia/reperfusion (I/R), by scintigraphy and histopathological evaluation in rats. Methods: Twenty-four rats were divided randomly into two groups. They received 0.1 ml of 99mTechnetium-etilenodicisteine intravenous, and a baseline (initial) renal scintigraphy was performed. The rats underwent 60 minutes of ischemia by left renal artery clamping. The right kidney was not manipulated. The sildenafil group (n=12) received orally 1 mg/kg of sildenafil suspension 60 minutes before ischemia. Treatment with saline 0.9% in the control group (n=12). Half of the rats was assessed after 24 hours and half after seven days I/R, with new renal scintigraphy to study differential function. After euthanasia, kidneys were removed and subjected to histopathological examination. For statistical evaluation, Student t and Mann-Whitney tests were used. Results: In the control group rats, the left kidneys had significant functional deficit, seven days after I/R, whose scintigraphic pattern was consistent with acute tubular necrosis, compared with the initial scintigraphy (p<0.05). Sildenafil treatment resulted in better differential function of the left kidneys 24h after reperfusion, compared with controls. Histopathologically, the left kidney of control rats (24 hours after I/R) showed a higher degree of cellular necrosis when compared with the sildenafil treated rats (p<0.05). Conclusion: Sildenafil had a protective effect in rat kidneys subjected to normothermic I/R, demonstrated by scintigraphy and histomorphometry

The Relationship between Materialistic Aspirations and Distinct Aspects of Psychological Well-being in a UK sample

The purpose of this research is to gain a deeper understanding of how materialistic aspirations are related to distinct aspects of psychological well-being. Research has consistently found a negative relationship between materialistic goals and well-being, but a review of the literature identified that the measures of well- being used in the majority of studies were measures of what Keyes (2002) describes as “subjective well-being” or “hedonic happiness”. Criticisms of these types of measures are that they fixate too much on the momentary experience of pleasure and don’t take into account what is meaningful and or what contributes to long lasting fulfilment. Very little research was found investigating the impact of materialism on “eudaimonic” well-being, which is found through doing what is worthwhile and realising ones potential and has been found to have a longer lasting impact on overall well-being (Huta & Ryan, 2010). To address this gap in the literature, a convenience sample of 113 adult subjects in the UK were recruited through Facebook and asked to respond to the Aspiration Index and the Psychological wellbeing scale. The relative importance placed on extrinsic (materialistic) and intrinsic aspirations was compared to the six dimensions of psychological well-being. In line with previous research, higher importance placed on materialistic aspirations for wealth, status and image were found to be negatively correlated with all aspects of psychological well-being. However, the strongest and only statistically significant negative correlation was between extrinsic aspirations and positive relations with others (r = -.256, p< 0.01). Positive relationships with other people form a central component of many theories of well- being and so this negative relationship may help to explain why materialistic aspirations are so consistently found to be negatively correlated to a variety of measures of well-being. Further research is needed to explore this relationship as no causation could be inferred.