The Brazilian Seismographic Integrated Systems (BRASIS): Infrastructure and data management

In geophysics and seismology, raw data need to be processed to generate useful information that can be turned into knowledge by researchers. The number of sensors that are acquiring raw data is increasing rapidly. Without good data management systems, more time can be spent in querying and preparing datasets for analyses than in acquiring raw data. Also, a lot of good quality data acquired at great effort can be lost forever if they are not correctly stored. Local and international cooperation will probably be reduced, and a lot of data will never become scientific knowledge. For this reason, the Seismological Laboratory of the Institute of Astronomy, Geophysics and Atmospheric Sciences at the University of São Paulo (IAG-USP) has concentrated fully on its data management system. This report describes the efforts of the IAG-USP to set up a seismology data management system to facilitate local and international cooperation. © 2011 by the Istituto Nazionale di Geofisica e Vulcanologia. All rights reserved.

Flexibility and torsional resistance of three nickel-titanium retreatment instrument systems

Aim To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. Methodology Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n=12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n=12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α=0.05). Results The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. Conclusions The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application. © 2011 International Endodontic Journal.

Design of microprogrammed controllers with address converter implemented on programmable systems with embedded memories

In the paper the improvement of a traditional structure of a microprogrammed controller with sharing codes is discussed. The idea is based on the modification of internal modules and connections of the device. Such a solution permits to reduce the number of embedded memories needed for implementation of the microprogrammed controller on programmable structures, especially FPGAs. © 2011 IEEE.

A logical approach to the management of object identifiers in non-conventional database management systems

Non-conventional database management systems are used to achieve a better performance when dealing with complex data. One fundamental concept of these systems is object identity (OID), because each object in the database has a unique identifier that is used to access and reference it in relationships to other objects. Two approaches can be used for the implementation of OIDs: physical or logical OIDs. In order to manage complex data, was proposed the Multimedia Data Manager Kernel (NuGeM) that uses a logical technique, named Indirect Mapping. This paper proposes an improvement to the technique used by NuGeM, whose original contribution is management of OIDs with a fewer number of disc accesses and less processing, thus reducing management time from the pages and eliminating the problem with exhaustion of OIDs. Also, the technique presented here can be applied to others OODBMSs. © 2011 IEEE.

Model to increase the lateral line length of drip irrigation systems

Non-pressure compensating drip hose is widely used for irrigation of vegetables and orchards. One limitation is that the lateral line length must be short to maintain uniformity due to head loss and slope. Any procedure to increase the length is appropriate because it represents low initial cost of the irrigation system. The hypothesis of this research is that it is possible to increase the lateral line length combining two points: using a larger spacing between emitters at the beginning of the lateral line and a smaller one after a certain distance; and allowing a higher pressure variation along the lateral line under an acceptable value of distribution uniformity. To evaluate this hypothesis, a nonlinear programming model (NLP) was developed. The input data are: diameter, roughness coefficient, pressure variation, emitter operational pressure, relationship between emitter discharge and pressure. The output data are: line length, discharge and length of the each section with different spacing between drippers, total discharge in the lateral line, multiple outlet adjustment coefficient, head losses, localized head loss, pressure variation, number of emitters, spacing between emitters, discharge in each emitter, and discharge per linear meter. The mathematical model developed was compared with the lateral line length obtained with the algebraic solution generated by the Darcy-Weisbach equation. The NLP model showed the best results since it generated the greater gain in the lateral line length, maintaining the uniformity and the flow variation under acceptable standards. It had also the lower flow variation, so its adoption is feasible and recommended.

Carbon dioxide emissions under different soil tillage systems in mechanically harvested sugarcane

Soil tillage and other methods of soil management may influence CO 2 emissions because they accelerate the mineralization of organic carbon in the soil. This study aimed to quantify the CO2 emissions under conventional tillage (CT), minimum tillage (MT) and reduced tillage (RT) during the renovation of sugarcane fields in southern Brazil. The experiment was performed on an Oxisol in the sugarcane-planting area with mechanical harvesting. An undisturbed or no-till (NT) plot was left as a control treatment. The CO2 emissions results indicated a significant interaction (p < 0.001) between tillage method and time after tillage. By quantifying the accumulated emissions over the 44 days after soil tillage, we observed that tillage-induced emissions were higher after the CT system than the RT and MT systems, reaching 350.09 g m-2 of CO2 in CT, and 51.7 and 5.5 g m-2 of CO2 in RT and MT respectively. The amount of C lost in the form of CO2 due to soil tillage practices was significant and comparable to the estimated value of potential annual C accumulation resulting from changes in the harvesting system in Brazil from burning of plant residues to the adoption of green cane harvesting. The CO 2 emissions in the CT system could respond to a loss of 80% of the potential soil C accumulated over one year as result of the adoption of mechanized sugarcane harvesting. Meanwhile, soil tillage during the renewal of the sugar plantation using RT and MT methods would result in low impact, with losses of 12% and 2% of the C that could potentially be accumulated during a one year period. © 2013 IOP Publishing Ltd.

Strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem

This paper proposes strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem (TEP). The concept of the binary numeral system (BNS) is used to reduce the number of binary and continuous variables related to the candidate transmission lines and network constraints that are connected with them. The construction phase of greedy randomized adaptive search procedure (GRASP-CP) and additional constraints, obtained from power flow equilibrium in an electric power system are employed for more reduction in search space. The multistage TEP problem is modeled like a mixed binary linear programming problem and solved using a commercial solver with a low computational time. The results of one test system and two real systems are presented in order to show the efficiency of the proposed solution technique. © 1969-2012 IEEE.

Labour markets and pension systems

Includes bibliography

Mass-imbalanced three-body systems in two dimensions

We consider three-body systems in two dimensions with zero-range interactions for general masses and interaction strengths. The momentum-space Schrödinger equation is solved numerically and in the Born-Oppenheimer (BO) approximation. The BO expression is derived using separable potentials and yields a concise adiabatic potential between the two heavy particles. The BO potential is Coulomb-like and exponentially decreasing at small and large distances, respectively. While we find similar qualitative features to previous studies, we find important quantitative differences. Our results demonstrate that mass-imbalanced systems that are accessible in the field of ultracold atomic gases can have a rich three-body bound state spectrum in two-dimensional geometries. Small light-heavy mass ratios increase the number of bound states. For 87Rb-87Rb-6Li and 133Cs- 133Cs-6Li we find respectively three and four bound states. © 2013 IOP Publishing Ltd.

Reducing the conservatism of LMI-based stabilisation conditions for TS fuzzy systems using fuzzy Lyapunov functions

In this article, the fuzzy Lyapunov function approach is considered for stabilising continuous-time Takagi-Sugeno fuzzy systems. Previous linear matrix inequality (LMI) stability conditions are relaxed by exploring further the properties of the time derivatives of premise membership functions and by introducing slack LMI variables into the problem formulation. The relaxation conditions given can also be used with a class of fuzzy Lyapunov functions which also depends on the membership function first-order time-derivative. The stability results are thus extended to systems with large number of rules under membership function order relations and used to design parallel-distributed compensation (PDC) fuzzy controllers which are also solved in terms of LMIs. Numerical examples illustrate the efficiency of the new stabilising conditions presented. © 2013 Copyright Taylor and Francis Group, LLC.

An assessment of the economic impact of climate change on the coastal and human settlements, tourism and transport sectors in Barbados

This report analyses the coastal and human settlements, tourism and transport sectors in Barbados to assess the potential economic impact of climate change on the sectors. The fundamental aim of this report is to assist with the development of strategies to deal with the potential impact of climate change on Barbados. Some of the key anticipated manifestations of climate change for the Caribbean include elevated air and sea-surface temperatures, sea-level rise, possible changes in extreme events and a reduction in freshwater resources. The economic impact of climate change on the three sectors was estimated for the A2 and B2 IPCC scenarios until 2050 (tourism and transport sectors) and 2100 (coastal and human settlements sector). An exploration of various adaptation strategies was also undertaken for each sector using standard evaluation techniques. The analysis has shown that based upon exposed assets and population, SLR can be classified as having the potential to create potential catastrophe in Barbados. The main contributing factor is the concentration of socioeconomic infrastructure along the coastline in vulnerable areas. The A2 and B2 projections have indicated that the number of catastrophes that can be classified as great is likely to be increased for the country. This is based upon the possible effects of the projected unscheduled impacts to the economy both in terms of loss of life and economic infrastructure. These results arise from the A2 and B2 projections, thereby indicating that growth in numbers and losses are largely due to socioeconomic changes over the projection period and hence the need for increased adaptation strategies. A key adaptation measure recommended is for the government of Barbados to begin reducing the infrastructure deficit by continuously investing in protective infrastructure to decrease the country’s vulnerability to changes in the climate. With regard to the tourism sector, it was found that by combining the impacts due to a reduction in tourist arrivals, coral reef loss and SLR, estimated total economic impact of climate change is US $7,648 million (A2 scenario) and US $5,127 million (B2 scenario). An economic analysis of the benefits and costs of several adaptation options was undertaken to determine the cost effectiveness of each one and it was found that four (4) out of nine (9) options had high cost-benefit ratios. It is therefore recommended that the strategies that were most attractive in terms of the cost-benefit ratios be pursued first and these were: (1) enhanced reef monitoring systems to provide early warning alerts of bleaching events; (2) artificial reefs or fish-aggregating devices; (3) development of national adaptation plans (levee, sea wall and boardwalk); (4) revision of policies related to financing carbon neutral tourism; and (5) increasing recommended design wind speeds for new tourism-related structures. The total cost of climate change on international transportation in Barbados aggregated the impacts of changes in temperature and precipitation, new climate policies and SLR. The impact for air transportation ranges from US$10,727 million (B2 scenario) to US$12,279 million (A2 scenario) and for maritime transportation impact estimates range from US$1,992 million (B2 scenario) to US$2,606 million (A2 scenario). For international transportation as a whole, the impact of climate change varies from US$12,719 million under the B2 scenario to US$14,885 million under the A2 scenario. Barbados has the institutions set up to implement adaptive strategies to strengthen the resilience of the existing international transportation system to climate change impacts. Air and sea terminals and facilities can be made more robust, raised, or even relocated as need be, and where critical to safety and mobility, expanded redundant systems may be considered.

A comparative study of eleven protein systems in tamarins, genus Saguinus (Platyrrhini, Callitrichinae)

A variabilidade genética de seis taxa de tamarins, gênero Saguinus, foi analisada comparativamente usando-se dados protéicos de onze sistemas codificados por quinze loci. S. fuscicollis weddelli e S. midas midas foram os taxa mais polimórficos, enquanto S. bicolor foi o menos. Os resultados da análise filogenética (UPGMA e neighbor-joining) e as distâncias genéticas entre os taxa foram em geral consistentes com suas relações geográficas e filogenéticas. As análises das populações de S. bicolor e S. midas indicaram que eles podem representar não mais do que três subespécies de uma única espécie, S. midas, com as formas de bicolor pertencendo a uma única subespécie, S. midas bicolor. Se apoiado por estudos adicionais, este fato teria implicações importantes para a conservação da forma de bicolor, que está em perigo de extinção. A similaridade genética de S. fuscicollis e S. mystax foi também consistente com sua proximidade geográfica e morfológica, embora mais dados sobre um número maior de taxa seriam necessários antes de se definirem as relações taxonômicas dentro do gênero.

Interpolação de dados de campo potencial através da camada equivalente

O uso da técnica da camada equivalente na interpolação de dados de campo potencial permite levar em consideração que a anomalia, gravimétrica ou magnética, a ser interpolada é uma função harmônica. Entretanto, esta técnica tem aplicação computacional restrita aos levantamentos com pequeno número de dados, uma vez que ela exige a solução de um problema de mínimos quadrados com ordem igual a este número. Para viabilizar a aplicação da técnica da camada equivalente aos levantamentos com grande número de dados, nós desenvolvemos o conceito de observações equivalentes e o método EGTG, que, respectivamente, diminui a demanda em memória do computador e otimiza as avaliações dos produtos internos inerentes à solução dos problemas de mínimos quadrados. Basicamente, o conceito de observações equivalentes consiste em selecionar algumas observações, entre todas as observações originais, tais que o ajuste por mínimos quadrados, que ajusta as observações selecionadas, ajusta automaticamente (dentro de um critério de tolerância pré-estabelecido) todas as demais que não foram escolhidas. As observações selecionadas são denominadas observações equivalentes e as restantes são denominadas observações redundantes. Isto corresponde a partir o sistema linear original em dois sistemas lineares com ordens menores. O primeiro com apenas as observações equivalentes e o segundo apenas com as observações redundantes, de tal forma que a solução de mínimos quadrados, obtida a partir do primeiro sistema linear, é também a solução do segundo sistema. Este procedimento possibilita ajustar todos os dados amostrados usando apenas as observações equivalentes (e não todas as observações originais) o que reduz a quantidade de operações e a utilização de memória pelo computador. O método EGTG consiste, primeiramente, em identificar o produto interno como sendo uma integração discreta de uma integral analítica conhecida e, em seguida, em substituir a integração discreta pela avaliação do resultado da integral analítica. Este método deve ser aplicado quando a avaliação da integral analítica exigir menor quantidade de cálculos do que a exigida para computar a avaliação da integral discreta. Para determinar as observações equivalentes, nós desenvolvemos dois algoritmos iterativos denominados DOE e DOEg. O primeiro algoritmo identifica as observações equivalentes do sistema linear como um todo, enquanto que o segundo as identifica em subsistemas disjuntos do sistema linear original. Cada iteração do algoritmo DOEg consiste de uma aplicação do algoritmo DOE em uma partição do sistema linear original. Na interpolação, o algoritmo DOE fornece uma superfície interpoladora que ajusta todos os dados permitindo a interpolação na forma global. O algoritmo DOEg, por outro lado, otimiza a interpolação na forma local uma vez que ele emprega somente as observações equivalentes, em contraste com os algoritmos existentes para a interpolação local que empregam todas as observações. Os métodos de interpolação utilizando a técnica da camada equivalente e o método da mínima curvatura foram comparados quanto às suas capacidades de recuperar os valores verdadeiros da anomalia durante o processo de interpolação. Os testes utilizaram dados sintéticos (produzidos por modelos de fontes prismáticas) a partir dos quais os valores interpolados sobre a malha regular foram obtidos. Estes valores interpolados foram comparados com os valores teóricos, calculados a partir do modelo de fontes sobre a mesma malha, permitindo avaliar a eficiência do método de interpolação em recuperar os verdadeiros valores da anomalia. Em todos os testes realizados o método da camada equivalente recuperou mais fielmente o valor verdadeiro da anomalia do que o método da mínima curvatura. Particularmente em situações de sub-amostragem, o método da mínima curvatura se mostrou incapaz de recuperar o valor verdadeiro da anomalia nos lugares em que ela apresentou curvaturas mais pronunciadas. Para dados adquiridos em níveis diferentes o método da mínima curvatura apresentou o seu pior desempenho, ao contrário do método da camada equivalente que realizou, simultaneamente, a interpolação e o nivelamento. Utilizando o algoritmo DOE foi possível aplicar a técnica da camada equivalente na interpolação (na forma global) dos 3137 dados de anomalia ar-livre de parte do levantamento marinho Equant-2 e 4941 dados de anomalia magnética de campo total de parte do levantamento aeromagnético Carauari-Norte. Os números de observações equivalentes identificados em cada caso foram, respectivamente, iguais a 294 e 299. Utilizando o algoritmo DOEg nós otimizamos a interpolação (na forma local) da totalidade dos dados de ambos os levantamentos citados. Todas as interpolações realizadas não seriam possíveis sem a aplicação do conceito de observações equivalentes. A proporção entre o tempo de CPU (rodando os programas no mesmo espaço de memória) gasto pelo método da mínima curvatura e pela camada equivalente (interpolação global) foi de 1:31. Esta razão para a interpolação local foi praticamente de 1:1.

Impactos de sistemas de cultivo, extrato húmico e adubos orgânico e mineral sobre alguns atributos físicos e químicos de um latossolo, cultivado com cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Economic efficiency of two baling systems for sugarcane straw

In recent years, harvesting process of sugarcane is changing itself, passing through semi-mechanized for mechanized system, who, currently predominate in Sao Paulo state, Brazil. Mechanized harvesting consists in a sequence of operations which includes cutting the pointer and chopping the stalk. The straw is a harvesting residue, and it stays in the ground, piling up above soil, with a possible prejudice for crop yield. An economic way to retract this straw is using mechanized processing for bailing it, involving hay balers, which are imported to Brazil and their use require regularly field conditions of work. Those balers could produce square or round bales, which can be sold to energy generation. This study aims to estimate economic efficiency indicators of round and square systems for sugarcane straw, establishing a relationship between baling costs and the incoming generated from those bales. Based on data set, round baling system was 26% more efficient than square baling system, and that round baler has a lower purchase price and a higher compress ratio of biomass, allowing a greater potential for power generation, turning it a more advantageous in a possible marketing for bales produced. (C) 2014 Elsevier B.V. All rights reserved.