A reaction engineering approach to homogeneously catalyzed glycerol hydrochlorination

The production of biodiesel through transesterification has created a surplus of glycerol on the international market. In few years, glycerol has become an inexpensive and abundant raw material, subject to numerous plausible valorisation strategies. Glycerol hydrochlorination stands out as an economically attractive alternative to the production of biobased epichlorohydrin, an important raw material for the manufacturing of epoxy resins and plasticizers. Glycerol hydrochlorination using gaseous hydrogen chloride (HCl) was studied from a reaction engineering viewpoint. Firstly, a more general and rigorous kinetic model was derived based on a consistent reaction mechanism proposed in the literature. The model was validated with experimental data reported in the literature as well as with new data of our own. Semi-batch experiments were conducted in which the influence of the stirring speed, HCl partial pressure, catalyst concentration and temperature were thoroughly analysed and discussed. Acetic acid was used as a homogeneous catalyst for the experiments. For the first time, it was demonstrated that the liquid-phase volume undergoes a significant increase due to the accumulation of HCl in the liquid phase. Novel and relevant features concerning hydrochlorination kinetics, HCl solubility and mass transfer were investigated. An extended reaction mechanism was proposed and a new kinetic model was derived. The model was tested with the experimental data by means of regression analysis, in which kinetic and mass transfer parameters were successfully estimated. A dimensionless number, called Catalyst Modulus, was proposed as a tool for corroborating the kinetic model. Reactive flash distillation experiments were conducted to check the commonly accepted hypothesis that removal of water should enhance the glycerol hydrochlorination kinetics. The performance of the reactive flash distillation experiments were compared to the semi-batch data previously obtained. An unforeseen effect was observed once the water was let to be stripped out from the liquid phase, exposing a strong correlation between the HCl liquid uptake and the presence of water in the system. Water has revealed to play an important role also in the HCl dissociation: as water was removed, the dissociation of HCl was diminished, which had a retarding effect on the reaction kinetics. In order to obtain a further insight on the influence of water on the hydrochlorination reaction, extra semi-batch experiments were conducted in which initial amounts of water and the desired product were added. This study revealed the possibility to use the desired product as an ideal “solvent” for the glycerol hydrochlorination process. A co-current bubble column was used to investigate the glycerol hydrochlorination process under continuous operation. The influence of liquid flow rate, gas flow rate, temperature and catalyst concentration on the glycerol conversion and product distribution was studied. The fluid dynamics of the system showed a remarkable behaviour, which was carefully investigated and described. Highspeed camera images and residence time distribution experiments were conducted to collect relevant information about the flow conditions inside the tube. A model based on the axial dispersion concept was proposed and confronted with the experimental data. The kinetic and solubility parameters estimated from the semi-batch experiments were successfully used in the description of mass transfer and fluid dynamics of the bubble column reactor. In light of the results brought by the present work, the glycerol hydrochlorination reaction mechanism has been finally clarified. It has been demonstrated that the reactive distillation technology may cause drawbacks to the glycerol hydrochlorination reaction rate under certain conditions. Furthermore, continuous reactor technology showed a high selectivity towards monochlorohydrins, whilst semibatch technology was demonstrated to be more efficient towards the production of dichlorohydrins. Based on the novel and revealing discoveries brought by the present work, many insightful suggestions are made towards the improvement of the production of αγ-dichlorohydrin on an industrial scale.

Engineering an improved adenovirus packaging cell line

Recombinant human adenovirus (Ad) vectors are being extensively explored for their use in gene therapy and recombinant vaccines. Ad vectors are attractive for many reasons, including the fact that (1) they are relatively safe, based on their use as live oral vaccines, (2) they can accept large transgene inserts, (3) they can infect dividing and postmitotic cells, and (4) they can be produced to high titers. However, there are also a number of major problems associated with Ad vectors, including transient foreign gene expression due to host cellular immune responses, problems with humoral immunity, and the creation of replication competent adenoviruses (RCA). Most Ad vectors contain deletions in the E1 region that allow for insertion of a transgene. However, the E1 gene products are required for replication and thus must be supplied in trans by a helper ceillille that will allow for the growth and packaging of the defective virus. For this purpose the 293 cell line (Graham et al., 1977) is used most often; however, homologous recombination between the vector and the cell line often results in the generation of RCA. The presence of RCA in batches of adenoviral vectors for clinical use is a safety risk because tlley . may result in the mobilization and spread of the replication-defective vector viruses, and in significant tissue damage and pathogenicity. The present research focused on the alteration of the 293 cell line such that RCA formation can be eliminated. The strategy to modify the 293 cells involved the removal of the first 380 bp of the adenovirus genome through the process of homologous recombination. The first step towards this goal involved identifying and cloning the left-end cellular-viral jUl1ction from 293 cells to assemble sequences required for homologous recombination. Polymerase chain reaction (PCR) was performed to clone the junction, and the clone was verified through sequencing. The plasn1id PAM2 was then constructed, which served as the targeting cassette used to modify the 293 cells. The cassette consisted of (1) the cellular-viral junction as the left-end region of homology, (2) the neo gene to use for positive selection upon tranfection into 293 cells, (3) the adenoviral genome from bp 380 to bp 3438 as the right-end region of homology, and (4) the HSV-tk gene to use for negative selection. The plasmid PAM2 was linearized to produce a double strand break outside the region of homology, and transfected into 293 cells using the calcium-phosphate technique. Cells were first selected for their resistance to the drug G418, and subsequently for their resistance to the drug Gancyclovir (GANC). From 17 transfections, 100 pools of G418f and GANCf cells were picked using cloning lings and expanded for screening. Genomic DNA was isolated from the pools and screened for the presence of the 380 bps using PCR. Ten of the most promising pools were diluted to single cells and expanded in order to isolate homogeneous cell lines. From these, an additional 100 G41Sf and GANef foci were screened. These preliminary screening results appear promising for the detection of the desired cell line. Future work would include further cloning and purification of the promising cell lines that have potentially undergone homologous recombination, in order to isolate a homogeneous cell line of interest.

Second Welland Canal - Book 1, Survey Map 2 - Lock 1 and Port Dalhousie

Survey map of the Second Welland Canal created by the Welland Canal Company showing the areas in and around Port Dalhousie and Grantham Township. Identified structures associated with the Canal include Lock 1, East and West Piers, Collector's Office, Lock Tender's House and the new towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks and businesses are also identified and include streets and roads (ex. Road to St. Catharines, Side Line, Old Road to Port Dalhousie, Road to Niagara), the Welland Railway and its structures (ex. freight sheds, wood shed, raised platform, elevator, cranes, water tank, turn table, and passenger station), G. A. Clark's Wood Yard, Clark's Wood Office, Alex Muir's Dry Dock, Donald, Andrews and Ross' Dry Dock, RandJ Laurie Flouring Mill, R. Laurie and Company Grist Mill and A. Morrison Saw Mill. A New Road to St. Catharines is featured in red ink. Properties and property owners of note are: Concession 1 Lots 19, 20 and 21, John Christie, and John Clark.

Second Welland Canal - Book 2, Survey Map 4 - Locks 11, 12, 13, 14 and 15 in Grantham

Survey map of the Second Welland Canal created by the Welland Canal Company showing the Grantham Township along the outskirts of Merritton. Identified structures associated with the Canal include Locks 11, 12, 13, 14, and 15, Lock House Lot, and the towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Several stones likely used in the measurements are identified on the map. Local area landmarks are also identified and include streets and roads(ex. Hartzel Road and Macadamized Road), the Great Western Railroad, Swing Bridge, Thorold Station and its structures (ex. freight house, office, water tank, and wood house), Gordon and Mackay Houses, Gordon and Mackay's Cotton Mill, hydraulic race, a wharf, pond, and an unnamed bridge. Properties and property owners of note are: Concession 9 Lots 12 and 13, A. Bradley, John O'Coner, G. Grant, J. Bradley, J. Vanderburgh, O. Clifford and a parcel of land leased Gordon and Mackay.

Second Welland Canal - Book 3, Survey Map 1 - Canal to Chippewa Creek with Port Robinson

Survey map of the Second Welland Canal created by the Welland Canal Company showing Port Robinson and the canal to Chippewa Creek. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Front Street, Bridge Street, and Cross Street), the Welland railroad, Dry Dock leased to D. McFarland and Abbey, G. Jordan Tavern, D. McFarland and Co. Burnt Saw Mill, I. Pew Shop, Old Locks, New Lock, Canal to Chippewa Creek, Chippewa Creek, covered drain from dry dock, a barn and several bridges. Properties and property owners of note are: Lots 202, Broken Front lots 202 and 203, D. McFarland, and G. Jordan.

Second Welland Canal - Book 3, Survey Map 2 - Canal to Chippewa Creek with Port Robinson

Survey map of the Second Welland Canal created by the Welland Canal Company showing the canal as it passes through Port Robinson. Identified structures associated with the Canal include the Guard Lock, Collector Toll Office, towing path, and the New Cut of the canal. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Island Street, Bridge Street, John Street, and Cross Street), bridges (Swing Bridge, and several unnamed bridges), Welland Railroad, Canal to Chippewa Creek (and two old locks and one new lock associated with the canal), Chippewa Creek, Back Water, an unnamed Island, Dry Dock leased to McFarland and Abbey, Abbey's Office, D. McFarland and Co. Saw Mill (Burnt), G. Jordan Tavern, Robert Elliot Store House and Wharf, Isaac Pew's Shop, Colemans Hotel, R. Band and Co. Girst Mill, Donaldson and Co. Grist Mill, H. Marlatt Dwelling House and barn, Henry W. Timms Hotel, Methodist Church, Post Office, Blacksmith Shop, a church, a structure labeled B. Patch, and a number of other structures that are not named. Properties and property owners of note are: Lots 202 and 203, S. Hill, D. McFarland, Church Society, G. Jordan, D. Coleman, John Brown, Rob Coulter, Robert Elliot, Isaac Pew, James McCoppen, William Bell, Charles Stuart, Andrew Elliot, Robert Band, Ed. Feney, John Betty, F. Sharp, William B. Hendershot, A. Brownson, H. Marlatt, J. S. Powell, and the School Trustees. Two reserved properties are labeled in red.The current spelling of Chippewa Creek is Chippawa. Although it not possible to make out the entire name of the H. W. Timms hotel located at Front and Bridge Street on the map itself, it was discovered to belong to Henry W. Timms after consulting the 1851-52 Canada Directory.

Second Welland Canal - Book 3, Survey Map 20 - Village of Port Colborne

Survey map of the Second Welland Canal created by the Welland Canal Company showing the areas in and around Port Colborne and Grantham Township. Identified structures associated with the Canal include Basin, Guard Lock, Two Lock Tender Houses, Lock House Lot, Collectors Office House, Towing Path, North and South Back Ditches, and land reserved for future improvemnt of basin. Surveyor measurements and notes can be seen in red and black ink as well as pencil. Local area landmarks dentified include Bridge, Rail Road Swing Bridge, Spoil Bank, Water Tank, Frazer Street Railway Station, Buffalo and Lake Huron Rail Road, Welland Rail Road, and land reserved for "Gardens for Lock Tenders". Local businesses identified include A.K Scholfield Store House Lot and Wharf, two stores and a tavern. Roads running parallel to Canal include King St., "present Travel Road", and the Southern Road Allowance. Roads running perpendicular to Canal include Kent St., Charlotte St., Clarence St., Princess St., Elgin St., George St., Frazer St., Alma St., Eastern Road Allowance. Properties and property owners are also identified and include P. White, John Flynn, George McMicking, Charles Carter, William H. Merritt, A.K. Scholfield, F. Gallgher, Ed McCabe, M. Smith, E. Lawder, J. Hanley, J. Harris, P. Gibbons, M. McGoveran, M. Madden, J. Hardison, T. Nihan, D. Gibbons, J. Cross, William Mellanby, Elis Gordon, Jane McCardy, L.G. Carter, T. Greenwood, C. Armstrong, J. McGillivray, T. Schofield, Mrs. Lanue, D. Mc_______, K. Minor, J. Manly and John McRae.

Introduction to engineering : a case study of an interdisciplinary course in Mathematics, Science and Technology

This thesis research was a qualitative case study of a single class of Interdisciplinary Studies: Introduction to Engineering taught in a secondary school. The study endeavoured to explore students' experiences in and perceptions of the course, and to investigate the viability of engineering as an interdisciplinary theme at the secondary school level. Data were collected in the form of student questionnaires, the researcher's observations and reflections, and artefacts representative of students' work. Data analysis was performed by coding textual data and classifying text segments into common themes. The themes that emerged from the data were aligned with facets of interdisciplinary study, including making connections, project-based learning, and student engagement and affective outcomes. The findings of the study showed that students were positive about their experiences in the course, and enjoyed its project-driven nature. Content from mathematics, physics, and technological design was easily integrated under the umbrella of engineering. Students felt that the opportunity to develop problem solving and teamwork skills were two of the most important aspects of the course and could be relevant not only for engineering, but for other disciplines or their day-to-day lives after secondary school. The study concluded that engineering education in secondary school can be a worthwhile experience for a variety of students and not just those intending postsecondary study in engineering. This has implications for the inclusion of engineering in the secondary school curriculum and can inform the practice of curriculum planners at the school, school board, and provincial levels. Suggested directions for further research include classroom-based action research in the areas of technological education, engineering education in secondary school, and interdisciplinary education.

Towards reverse engineering of Photosystem II: Synergistic Computational and Experimental Approaches

ABSTRACT Photosystem II (PSII) of oxygenic photosynthesis has the unique ability to photochemically oxidize water, extracting electrons from water to result in the evolution of oxygen gas while depositing these electrons to the rest of the photosynthetic machinery which in turn reduces CO2 to carbohydrate molecules acting as fuel for the cell. Unfortunately, native PSII is unstable and not suitable to be used in industrial applications. Consequently, there is a need to reverse-engineer the water oxidation photochemical reactions of PSII using solution-stable proteins. But what does it take to reverse-engineer PSII’s reactions? PSII has the pigment with the highest oxidation potential in nature known as P680. The high oxidation of P680 is in fact the driving force for water oxidation. P680 is made up of a chlorophyll a dimer embedded inside the relatively hydrophobic transmembrane environment of PSII. In this thesis, the electrostatic factors contributing to the high oxidation potential of P680 are described. PSII oxidizes water in a specialized metal cluster known as the Oxygen Evolving Complex (OEC). The pathways that water can take to enter the relatively hydrophobic region of PSII are described as well. A previous attempt to reverse engineer PSII’s reactions using the protein scaffold of E. coli’s Bacterioferritin (BFR) existed. The oxidation potential of the pigment used for the BFR ‘reaction centre’ was measured and the protein effects calculated in a similar fashion to how P680 potentials were calculated in PSII. The BFR-RC’s pigment oxidation potential was found to be 0.57 V, too low to oxidize water or tyrosine like PSII. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of iii tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. The results were used to develop a second generation of BFR-RC using a high oxidation pigment. The hypervalent phosphorous porphyrin forms a radical pair that can be observed using Transient Electron Paramagnetic Resonance (TR-EPR). Finally, the results from this thesis are discussed in light of the development of solar fuel producing systems.

Engineering school notebook which belonged to S.D. Woodruff

Engineering school notebook which belonged to S.D. Woodruff. This book contains logarithm notes, plane trigonometry, surveying and content of land. The outer page is torn and the notebook is quite discoloured. This does not affect the text. It has no covers, n.d.

Engineering school notebook which belonged to S.D. Woodruf

Engineering school notebook which belonged to S.D. Woodruff. This book contains questions for exercise as well as other mathematical topics. It also contains a page which has the title “The Cataract of Niagara in North America” and quite a few pages of repetitive lines as in “writing lines”. Some of the pages are loose or torn and the notebook is discoloured. This does not affect the text. This book has no covers, n.d.

Cross sections of excavation required to make a ditch on the earth side of the railroad near Port Dalhousie

Cross sections of excavation required to make a ditch on the earth side of the railroad near Port Dalhousie. This is a 12 page booklet of hand- drawn charts and diagrams which is slightly stained. Text is not affected, Mar. 1860.

Voucher #22 to James McCoppen (copy) which includes a letter from James McCoppen regarding a claim for having water backed up into his grain and grass by the embankment of the railroad. The letter is dated June 24, 1857 and the voucher is dated Jul. 1, 1857

Voucher #22 to James McCoppen (copy) which includes a letter from James McCoppen regarding a claim for having water backed up into his grain and grass by the embankment of the railroad. The letter is dated June 24, 1857 and the voucher is dated Jul. 1, 1857.

The New Continental Line Atchison, Topeka and Santa Fe Railroad West and Southwest schedule

The New Continental Line Atchison, Topeka and Santa Fe Railroad West and Southwest schedule. The schedule is slightly torn. This does not affect the text, Sept. 4, 1881.

The new California Line via Atchison, Topeka and Santa Fe Railroad and Southern Pacific Railroad

The new California Line via Atchison, Topeka and Santa Fe Railroad and Southern Pacific Railroad. This schedule is torn. This does not affect text, n.d.