MixAR mobile prototype: visualizing virtually reconstructed ancient structures in situ

Archeology and related areas have a special interest on cultural heritage sites since they provide valuable information about past civilizations. However, the ancient buildings present in these sites are commonly found in an advanced state of degradation which difficult the professional/expert analysis. Virtual reconstructions of such buildings aim to provide a digital insight of how these historical places could have been in ancient times. Moreover, the visualization of such models has been explored by some Augmented Reality (AR) systems capable of providing support to experts. Their compelling and appealing environments have also been applied to promote the social and cultural participation of general public. The existing AR solutions regarding this thematic rarely explore the potential of realism, due to the following lacks: the exploration of mixed environments is usually only supported for indoors or outdoors, not both in the same system; the adaptation of the illumination conditions to the reconstructed structures is rarely addressed causing a decrease of credibility. MixAR [1] is a system concerned with those challenges, aiming to provide the visualization of virtual buildings augmented upon real ruins, allowing soft transitions among its interiors and exteriors and using relighting techniques for a faithful interior illumination, while the user freely moves in a given cultural heritage site, carrying a mobile unit. Regarding the focus of this paper, we intend to report the current state of MixAR mobile unit prototype, which allows visualizing virtual buildings – properly aligned with real-world structures – based on user's location, during outdoor navigation. In order to evaluate the prototype performance, a set of tests were made using virtual models with different complexities.

RAPD em Pau-rosa (Aniba rosaeodora Ducke): adaptação do método para coleta de amostras in situ, ajuste das condições de PCR e apresentação de um processo para selecionar bandas reprodutíveis

O Pau-rosa (Aniba rosaeodora Ducke) é uma espécie importante economicamente para a Região Amazônica, porque sua madeira é fonte de linalol, insumo utilizado pelas perfumarias. Esta espécie foi explorada durante décadas e, ainda assim, o conhecimento acerca da diversidade genética intra-específica é muito restrito. Foram objetivos deste trabalho: 1) validar um protocolo para coleta de folhas de pau-rosa que permitisse preservar a integridade do DNA até a estocagem em "freezer"; 2) selecionar um protocolo para extração de DNA em quantidade e qualidade adequadas para geração de bandas RAPD e 3) desenvolver um critério para avaliar o grau de reprodutibilidade que pudesse auxiliar a seleção de bandas RAPD úteis para análises de diversidade genética. Imediatamente após a coleta, as folhas foram acondicionadas em tubos de polietileno com sílica gel e aí permaneceram por até 10 dias. Foram testados três protocolos para a extração de ácidos nucléicos destas folhas, condições ideais para as PCR e a reprodutibilidade dos padrões RAPD. Critérios para a eliminação das bandas que mais contribuíram para o afastamento dos resultados do ideal da reprodutibilidade total foram desenvolvidos e a significância estatística das diferenças geradas pela aplicação dos critérios ao conjunto de dados foi testada. DNA com qualidade e em quantidade suficiente para a geração de padrões RAPD, nas condições ideais definidas para as PCRs, foi obtido. A eliminação de bandas com reprodutibilidade menor que 70% não diferiu do controle. A eliminação de bandas com reprodutibilidade menor que 90% diferiu dos demais tratamentos em todos os arranjos testados (P < 5%).

One-step in situ synthesis of polyamide microcapsules with inorganic payload and their transformation into responsive thermoplastic composite materials

Well-dispersed loads of finely powdered metals, metal oxides, several carbon allotropes or nanoclays are incorporated into highly porous polyamide 6 microcapsules in controllable amounts via an original one-step in situ fabrication technique. It is based on activated anionic polymerization (AAP) of ε-caprolactam in a hydrocarbon solvent performed in the presence of the respective micro- or nanosized loads. The forming microcapsules with typical diameters of 25-50 µm entrap up to 40 wt% of load. Their melt processing produces hybrid thermoplastic composites. Mechanical, electric conductivity and magnetic response measurements show that transforming of in situ loaded microcapsules into composites by melt processing (MP) is a facile and rapid method to fabricate materials with high mechanical resistance and electro-magnetic characteristics sufficient for many industrial applications. This novel concept requires low polymerization temperatures, no functionalization or compatibilization of the loads and it is easy to scale up at industrial production levels.

Time-variations of equivalent water heights'from Grace Mission and in-situ river stages in the Amazon basin

Gravity Recovery and Climate Experiment (GRACE) mission is dedicated to measuring temporal variations of the Earth's gravity field. In this study, the Stokes coefficients made available by Groupe de Recherche en Géodésie Spatiale (GRGS) at a 10-day interval were converted into equivalent water height (EWH) for a ~4-year period in the Amazon basin (from July-2002 to May-2006). The seasonal amplitudes of EWH signal are the largest on the surface of Earth and reach ~ 1250mm at that basin's center. Error budget represents ~130 mm of EWH, including formal errors on Stokes coefficient, leakage errors (12 ~ 21 mm) and spectrum truncation (10 ~ 15 mm). Comparison between in situ river level time series measured at 233 ground-based hydrometric stations (HS) in the Amazon basin and vertically-integrated EWH derived from GRACE is carried out in this paper. Although EWH and HS measure different water bodies, in most of the cases a high correlation (up to ~80%) is detected between the HS series and EWH series at the same site. This correlation allows adjusting linear relationships between in situ and GRACE-based series for the major tributaries of the Amazon river. The regression coefficients decrease from up to down stream along the rivers reaching the theoretical value 1 at the Amazon's mouth in the Atlantic Ocean. The variation of the regression coefficients versus the distance from estuary is analysed for the largest rivers in the basin. In a second step, a classification of the proportionality between in situ and GRACE time-series is proposed.

KIAA1549: BRAF gene fusion and FGFR1 hotspot mutations are prognostic factors in pilocytic astrocytomas

Up to 20% of patients with pilocytic astrocytoma (PA) experience a poor outcome. BRAF alterations and Fibroblast growth factor receptor 1 (FGFR1) point mutations are key molecular alterations in Pas, but their clinical implications are not established. We aimed to determine the frequency and prognostic role of these alterations in a cohort of 69 patients with PAs. We assessed KIAA1549:BRAF fusion by fluorescence in situ hybridization and BRAF (exon 15) mutations by capillary sequencing. In addition, FGFR1 expression was analyzed using immunohistochemistry, and this was compared with gene amplification and hotspot mutations (exons 12 and 14) assessed by fluorescence in situ hybridization and capillary sequencing. KIAA1549:BRAF fusion was identified in almost 60% of cases. Two tumors harbored mutated BRAF. Despite high FGFR1 expression overall, no cases had FGFR1 amplifications. Three cases harbored a FGFR1 p.K656E point mutation. No correlation was observed between BRAF and FGFR1 alterations. The cases were predominantly pediatric (87%), and no statistical differences were observed in molecular alterations-related patient ages. In summary, we confirmed the high frequency of KIAA1549:BRAF fusion in PAs and its association with a better outcome. Oncogenic mutations of FGFR1, although rare, occurred in a subset of patients with worse outcome. These molecular alterations may constitute alternative targets for novel clinical approaches, when radical surgical resection is unachievable.

Great amount of C.pneumoniae in ruptured plaque vessel segments at autopsy. A comparative study with stable plaques

A possible relationship between C.pneumoniae (CP) infection, atherosclerosis and acute myocardial infarction is a debated matter. Now we performed the search of CP in histological segments of fatal ruptured plaques and of stable plaques by histochemistry (Macchiavello stain), immunohistochemistry and in situ hybridization techniques. Electron microscopy and confocal laser microscopy techniques were used in two additional cases. The semi-quantitification of CP + cells (0-4+) and quantification of lymphocytes demonstrated greater amount of CP + cells and more inflammation in the adventitia of vulnerable plaque vessel segments than of stable ones, larger amount of CP + cells in adventitia than in the plaque and high frequency of CP + cells in all groups studied. This preliminary study strongly suggests a direct pathogenetic involvement of adventitial CP in the rupture of the atheromatous plaque, development of acute myocardial infarction and also in the development of atherosclerosis.

Coinfection with Mycoplasma Pneumoniae and Chlamydia Pneumoniae in ruptured plaques associated with acute myocardial infarction

OBJECTIVE: To study atheromas, Mycoplasma pneumoniae (M. pneumoniae), and Chlamydia pneumoniae (C. pneumoniae). METHODS: C. pneumoniae was studied with immunohistochemistry and M. pneumoniae with in situ hybridization (ISH), in segments of coronary arteries (SCA) as follows: group A - thrombosed ruptured plaques (TRP) of 23 patients who died due to acute myocardial infarction (AMI); group B - 23 nonruptured plaques (NRP) of group A patients; group C - NRP of 11 coronary patients who did not die due to AMI; and group D - 11 SCA from patients with dilated cardiomyopathy or Chagas' disease without atherosclerosis. RESULTS: The mean number of C. pneumoniae+ cells/400x in groups A, B, C, and D was, respectively, 3.3±3.6; 1.0±1.3; 1.2±2.4; and 0.4±0.3; and the percentage of M. pneumoniae area was, respectively, 3.9±3.5; 1.5± 1.6; 0.9±0.9; and 0.4±0.2. More M. pneumoniae and C. pneumoniae were found in of group A than in group B (P<0.01). Good correlation was seen between the area of the vessel and the M. pneumoniae area in the plaque (r = 0.46; P=0.001) and between C. pneumoniae+ cells and CD4+ T lymphocytes (r = 0.42; P<0.01). The number of C. pneumoniae+ cells correlated with CD20+ B cells (r=0.48; P<0.01). CONCLUSION: M. pneumoniae and C. pneumoniae are more frequently found in TRP correlate with the intensity of the inflammation and diameter of the vessel (positive remodeling).

Ensayos de colapsibilidad in situ

En esta investigación se plantea la ejecución de ensayos in situ para medir la colapsibilidad de los suelos loéssicos de la ciudad de Córdoba. Actualmente las metodologías más comunes para realizar ensayos de colapsibilidad son de laboratorio. Esto supone una serie de inconvenientes y, en cierto modo, algunas indeterminaciones al querer transferir a la realidad del comportamiento del suelo las determinaciones de laboratorio, en especial en cuanto a los asentamientos. Por su parte, existen suelos limo-arenosos o arenas finas-limosas muy difíciles o casi imposibles de muestrear, por tratarse de suelos sumamente friables, en los que no resultan de aplicación los métodos de laboratorio. En este tipo de suelos es de especial interés el desarrollo de una técnica para la ejecución de ensayos de colapsibilidad in situ. La intención del trabajo de investigación planteado es el desarrollo de la técnica de ensayo in situ y su calibración por comparación con ensayos de laboratorio. Con la información adquirida se evaluarán los resultados y se enunciarán las conclusiones pertinentes. Objetivos generales: * Estudiar la caracterización de los suelos colapsables. * Proponer metodologías alternativas de estudio de estos suelos. Objetivos específicos: * Determinaciones comparativas de ensayos de campaña y laboratorio. * Definir aspectos metodológicos-prácticos para la realización sistemática de estos ensayos

ESTUDIOS CITOGENÉTICOS EN CACTACEAE Y SOLANACEAE: MAPEO FÍSICO DE SECUENCIAS DE ADN REPETITIVO POR HIBRIDACIÓN IN SITU FLUORESCENTE (FISH)

En este proyecto propone aplicar técnicas de citogenética molecular analizando principalmente patrones de distribución de secuencias de ADN repetitivo, en especies sudamericanas de Cactaceae (Notocacteae, Trichocereeae, Hylocereae y Rhipsalideae) y Solanaceae (Cestroideae, Nicotianoideae, Petunioideae, Schizanthoideae, Schwenckioideae y Solanoideae). Las tres familias presentan importantes centros de diversificación en Sudamérica y un enorme interés desde el punto de vista económico, biológico y ecológico. Para lo cual serán utilizadas técnicas de coloración convencional y de hibridación in situ fluorescente (FISH) en especies de diferentes tribus y subfamilias. Estos estudios cariotípicos, en especial la distribución de secuencias de ADN repetitivo, permitirán explorar nuevos aspectos de la diferenciación cromosómica, aportando marcadores cromosómicos que podrían ser utilizados en estudios de evolución cariotípica y ser importantes para robustecer la comprensión de relaciones sistemáticas y filogenéticas. Los estudios citogenéticos en estas familias son esenciales para contribuir al conocimiento de su origen, diversificación y evolución, como así también para colaborar con el diseño de estrategias de mejoramiento genético de especies cultivadas y conservación de especies amenazadas.

Wideband impedance spectrum analyzer with arbitry fine frequency resolution for in situ sensor applications

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2009

Spektroskopische in situ-Untersuchungen der katalytischen CO-Oxidation an oxidmodifizierten Platinmetalloberflächen

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2010

In situ Röntgen-CT Untersuchung des mechanischen Verhaltens eines Polymerhartschaumstoffes im Zugversuch

Die Mesostruktur von Werkstoffen wie Faserverbundwerkstoffen und Schaumstoffen beeinflusst deren mechanisches Verhalten wesentlich. Die inneren Strukturen des Werkstoffes müssen in die Analyse des Verformungs- und Versagensverhaltens einbezogen werden. Die Röntgenanalyse, insbesondere die Röntgen-Computertomographie (Röntgen-CT) ermöglicht eine zerstörungsfreie 3-dimensionale (3-d) Visualisierungund Charakterisierung innerer Strukturen. Für die Untersuchung des Einflusses der Mesostruktur eines Polymethacrymlid-Hartschaumstoffes auf das mechanische Verhalten speziell unter zugbelastung sollte eine speziell vom Fraunhofer-Institut für Werkstoffmechanik in Halle entwickelte In-situ-Verformungseinrichtung erprobt werden. Die Anlage wurde speziell für den Zugversuch optimiert. Es folgten mechanische Experimente, die mit den 3d-Bilddaten der Zellstruktur des Schaumstoffes korrelieren. Die ermittelten Bilddaten werden mit Hilfe einer Bildanalysesoftware ausgewertet und Rückschlüsse auf Verformungs- und Versagensverhalten grtroffen.

The Discrimination of Colored Acrylic, Cotton, and Wool Textile Fibers Using Micro-Raman Spectroscopy. Part 1 : In Situ Detection and Characterization of Dyes

Raman spectroscopy has been applied to characterize fiber dyes and determine the discriminating ability of the method. Black, blue, and red acrylic, cotton, and wool samples were analyzed. Four excitation sources were used to obtain complementary responses in the case of fluorescent samples. Fibers that did not provide informative spectra using a given laser were usually detected using another wavelength. For any colored acrylic, the 633-nm laser did not provide Raman information. The 514-nm laser provided the highest discrimination for blue and black cotton, but half of the blue cottons produced noninformative spectra. The 830-nm laser exhibited the highest discrimination for red cotton. Both visible lasers provided the highest discrimination for black and blue wool, and NIR lasers produced remarkable separation for red and black wool. This study shows that the discriminating ability of Raman spectroscopy depends on the fiber type, color, and the laser wavelength.

An atypical 7q11.23 deletion in a normal IQ Williams-Beuren syndrome patient.

Williams-Beuren syndrome (WBS; OMIM no. 194050) is a multisystemic neurodevelopmental disorder caused by a hemizygous deletion of 1.55 Mb on chromosome 7q11.23 spanning 28 genes. Haploinsufficiency of the ELN gene was shown to be responsible for supravalvular aortic stenosis and generalized arteriopathy, whereas LIMK1, CLIP2, GTF2IRD1 and GTF2I genes were suggested to be linked to the specific cognitive profile and craniofacial features. These insights for genotype-phenotype correlations came from the molecular and clinical analysis of patients with atypical deletions and mice models. Here we report a patient showing mild WBS physical phenotype and normal IQ, who carries a shorter 1 Mb atypical deletion. This rearrangement does not include the GTF2IRD1 and GTF2I genes and only partially the BAZ1B gene. Our results are consistent with the hypothesis that hemizygosity of the GTF2IRD1 and GTF2I genes might be involved in the facial dysmorphisms and in the specific motor and cognitive deficits observed in WBS patients.

Modeling of in-situ crystallization processes in the Permian mafic layered intrusion of Mont Collon (Dent Blanche nappe, western Alps)

The Mont Collon mafic complex is one of the best preserved examples of the Early Permian magmatism in the Central Alps, related to the intra-continental collapse of the Variscan belt. It mostly consists (> 95 vol.%) of ol+hy-nonnative plagioclase-wehrlites, olivine- and cpx-gabbros with cumulitic structures, crosscut by acid dikes. Pegmatitic gabbros, troctolites and anorthosites outcrop locally. A well-preserved cumulative, sequence is exposed in the Dents de Bertol area (center of intrusion). PT-calculations indicate that this layered magma chamber emplaced at mid-crustal levels at about 0.5 GPa and 1100 degrees C. The Mont Collon cumulitic rocks record little magmatic differentiation, as illustrated by the restricted range of clinopyroxene mg-number (Mg#(cpx)=83-89). Whole-rock incompatible trace-element contents (e.g. Nb, Zr, Ba) vary largely and without correlation with major-element composition. These features are characteristic of an in-situ crystallization process with variable amounts of interstitial liquid L trapped between the cumulus mineral phases. LA-ICPMS measurements show that trace-element distribution in the latter is homogeneous, pointing to subsolidus re-equilibration between crystals and interstitial melts. A quantitative modeling based on Langmuir's in-situ crystallization equation successfully duplicated the REE concentrations in cumulitic minerals of all rock facies of the intrusion. The calculated amounts of interstitial liquid L vary between 0 and 35% for degrees of differentiation F of 0 to 20%, relative to the least evolved facies of the intrusion. L values are well correlated with the modal proportions of interstitial amphibole and whole-rock incompatible trace-element concentrations (e.g. Zr, Nb) of the tested samples. However, the in-situ crystallization model reaches its limitations with rock containing high modal content of REE-bearing minerals (i.e. zircon), such as pegmatitic gabbros. Dikes of anorthositic composition, locally crosscutting the layered lithologies, evidence that the Mont Collon rocks evolved in open system with mixing of intercumulus liquids of different origins and possibly contrasting compositions. The proposed model is not able to resolve these complex open systems, but migrating liquids could be partly responsible for the observed dispersion of points in some correlation diagrams. Absence of significant differentiation with recurrent lithologies in the cumulitic pile of Dents de Bertol points to an efficiently convective magma chamber, with possible periodic replenishment, (c) 2005 Elsevier B.V. All rights reserved.