Variação na estrutura da vegetação de duas cultivares de Panicum maximum jacq. (colonião e tabiatã) submetidas a diferentes tipos de manejo. Composição em proteína bruta e digestibilidade In vitro da matéria seca

This work was carried out at FCAV-UNESP, Campus of Jaboticabal, Brazil, to study the effects of nitrogen fertilization (0 and 50 kg N/ha/cut), three sucessive periods of growth (December 21st 1987, January 25th 1988 and February 29th 1988)) and three cutting ages (28, 35 and 42 days) on composition in crude protein and in vitro dry matter digestibility of two cultivars of Panicum maximum Jacq. i.e., Coloniao and Tobiata. Plants were harvested in five vertical layers above soil level (0-20, 20-40, 40-60, 60-80 and over 80 cm). The samples were divided in: green leaves, green stems and dry material. Generally, values of in vitro dry matter digestibility and the levels of crude protein of both cultivars were greater in the higher layers of the vegetation, with a decrease, however, for the other layers and more advanced phases of plants development, mainly with no N fertilization.

Influência da utilização da proteína texturizada de soja nas características sensoriais, químicas e funcionais e de processamento do fiambre de frango

This research was designed to study the effect of addition of 5, 10 e 15% of textured soy protein (TSP) on sensorial, chemical, and physical-chemical parameters of chicken loaf with ground meat. The sensorial properties were not affected by textured soy protein. The addition of textured soy protein in preparing chicken loaf increased the water absorption and holding capacity, and decreased the moisture and ether extract content, but did not increase the final product yield.

Níveis de proteína bruta e de energia metabolizável para frangas de postura semipesadas de 1 a 18 semanas de idade

The aim of this experiment was to evaluate the performance of commercial layers between 1 and 18 weeks of age submitted to different crude protein (CP) and metabolizable energy (ME) levels. The trial was carried out at the poultry sector of the Department of Animal Science, of the Centro de Ciencias Agrarias, Universidade Federal of Paraiba, Areia-PB, Brazil. Four hundred and thirty-two Lohmann Brown chicks were used at 3 days of age according to a completely randomized design in a 3 x 3 factorial scheme, with three CP levels and three ME levels. In the first phase (1-6 wk), the birds were fed with diets containing three levels of CP: 21, 22 or 23% CP and three levels of ME: 2,900, 3,000 and 3,100 kcal/kg diet. In the second phase (7-12 wk) and in the third phases (13-18 wk), CP levels of feeding were 18, 19 or 20%, and 16, 17 or 18%, respectively, and three ME levels being 2,700, 2,800 or 2,900 kcal ME/kg diet in these two phases. It was not found interaction between CP and ME levels. Based on the results obtained one recommends for the phases from 1 to 6, 7 to 12 and 13 to 18 weeks of age the levels of 21 % of CP and 2900 kcal of ME/kg diets, 20% of CP and 2700 kcal of ME/kg diets and 16% of CP and 2700 kcal of ME/kg diets respectively.

Relação lisina digestível: proteína digestível em rações para tilápias-do-nilo

This study was carried out to determine the best digestible protein/digestible lysine ratio that should be present in feed fed to Nile tilapias. Two hundred and sixteen tilapias (11.0 +/- 0.43g) were distributed in 36 fish tanks (205 L) at a density of 6 fish/tank. Twelve feeds were formulated with three different digestible protein (DP) levels 22.0; 26.0 and 30.0% (based on digestible amino acids) and four different lysine percentages of 4.5; 6.0; 7.5 or 9.0% in relation to digestible protein. The fish were fed ad libtum during a 60-day period. There was significant effect of the digestible protein and digestible lysine ratio on weight gain, because the increase in lysine levels in feeds with 26 and 30% DP promoted linear increase in this parameter. The best values for feed conversion were obtained at the levels 26 and 30% DP that increased the daily consumption of digestible protein. The lysine level caused a linear reduction in feed conversion and linear increase in the protein efficiency rate. The results suggested that the 26% DP level might be used in ration to feed Nile tilapia juveniles; however, these should contain digestible amino acids and the digestible lysine/digestible protein ratio should be 6.0%. However, for levels higher than 26% DP, a maximum digestible lysine level of 7.5% DP improved weight gain for the species.

Caracterização da fusão caruncular em gestações naturais e de conceptos bovinos clonados

Barreto R.S.N., Miglino M.A., Meirelles F.V., Visintin J.A., Silva S.M., Burioli K.C., Fonseca R., Bertan C., Assis Neto A.C. & Pereira F.T.V. 2009. [Characterization of the caruncular fusion in gestations of natural and cloned bovine conceptuses.] Caracterizacao da fusao caruncular ern gestacoes naturais e de conceptos bovinos clonados. Pesquisa Veterinaria Brasileira 29(10):779-787. Laboratorio de Morfofisiologia da Placenta e Embriao, Faculdade de Zootecnia, Universidade Estadual Paulista, SP294 Km 651, Dracena, SP 17900-000, Brazil. E-mail: fverechia@dracena.unesp.brThe objective of the study was to compare the characteristics of the caruncular fusion in gestations of non-cloned and cloned conceptuses. The non-cloned conceptuses were divided according to the gestation period: Group 1 (2 to 3 months; n=9),II (4 to 6; n=9); III (7 to 8; n=10) and IV (9 n=7). The cloned conceptuses formed the Group V: 9 months; n=4. The caruncles were observed macroscopically (number and dimensions: length, width and height), microscopically and submitted to statistical analysis (5% of significance). We observed three types of macroscopic caruncular fusions: oval (morphologically normal); two united adjacent caruncles and the lobulated type, characterized by regions with several united caruncles presenting a false fusion or deformation of the caruncular parenchyma. The length of the caruncles was 1.55 +/- 0.57; 2.45 +/- 0.55; 4.66 +/- 2.0 and 5.72 +/- 1.90cm for the groups 1, 11, 111, IV respectively. As for the height, the caruncles presented a lineal growth during the gestation: 0.40 +/- 0.15; 0.57 +/- 0.21; 1.0 +/- 0.48 and 1.80 +/- 0.91cm, for the respective groups 1, 11, 111 and IV. The width of the caruncles was similar between the groups I and 11 (0.97 +/- 0.30 e 1.42 +/- 0.71 cm) and the groups III and IV (2.68 +/- 1.22 and 3.52 +/- 1.16cm). When the group V was compared to the IV, the caruncles of the group V presented a larger length (5.72 +/- 1.90 vs. 7.88 +/-.13cm) and width (3.52 +/- 1.16 vs. 4.93 +/- 1.46cm), however they were similar in height (1.80 +/- 0.91 and 2.25 +/- 0.67cm). We verified that in gestations of cloned conceptuses the caruncles presented a larger development than in gestations of non-cloned conceptuses. The fusioned caruncles presented measurements statistically similar to the isolated ones in all the parameters and groups. Under light microscopy, we observed the formation of a stromal axis from the basis of the caruncle to the apex of the fusional fissure, with the histological constitution similar to the endometrial stroma. Three microscopic shapes were also unpublished defined: true fusion with a single axis evident below the fusional fissure; pseudofusion with a double axis in H shape and false fusion with absence of the axis. The first two formats were associated to the oval and lobulated caruncles and the last one to the false fusion with deformation of the caruncle parenchyma. The fusional axis increased in size along the gestation among the groups I, II, III and IV. The group V presented a larger length and width of the axis when compared to the group IV. Thus, in gestations of cloned conceptuses a destruction of the lateral epithelium of the caruncles is associated to an incompetence in the maternal-fetal interdigitation, that compromises the cotyledonary fusion. We suggest that, in gestations derived of cloned conceptuses, the increase of the size of the caruncular fusions is possibly associated to a compensatory mechanism for the metabolic exchanges between mother and fetus, in reason of the smallest number of isolated caruncles.

Níveis de proteína digestível e energia digestível em dietas para tilápias-do-nilo formuladas com base no conceito de proteína ideal

This study was carried out to determine the best digestible energy and digestible protein ratio in feeds for Nile tilapia (Oreochromis niloticus) juveniles 30.0 +/- 4.21 g) based on digestible amino acids and the ideal protein concept). Twelve rations were formulated with protein levels 22.0; 26.0; 30.0 and 34.0% of digestible protein and levels 3,000, 3,300 and 3,600 kcal/kg digestible energy. The digestible energy/digestible protein ratio was between 8.94 and 15.19 kcal/g. Three hundred and twenty four tilapias were randomly distributed in thirty six 250 L circular tanks at a density of 9 fish/tank, a total of 12 treatments with three replications. After 60 days, there was no significant difference in weight gain, daily weight gain and feed conversion ratio among the studied treatments. A linear increase was observed in fillet yield with increasing digestible protein. With respect to feed cost/kg weight gain, the treatment with 30.0% DP and 3,000 kcal/kg DE presented low cost and better cost effectiveness index. Therefore, it was concluded that digestible energy did not influence the productive performance parameters and that effective feeds can be formulated with DP levels lower than 34% when feeding juvenile tilapias. The ration should be formulated based on the concept of ideal protein.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Efeito das técnicas de fusão sobre a fluidez de ligas do sistema cobre-alumínio.

It was evaluated the castability of four copper-aluminium alloy according the melting casting method used. The specimens were made using polyester mesh screen, with 11 x 11 filaments of 0.26 mm thick, fixed along of two adjacent edges in wax bar, with the sprue attached at their junction. The alloys were in an electrical casting machine and a centrifugal casting machine with an air/gas torch. The castability values were obtained by the percentage of completed segments of the resulting cast alloy screen. It was verified that the use of the electrical casting machine produced higher castability values to the copper-aluminium alloys than those produced by a centrifugal casting machine with an air/gas torch.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.

The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.

Exigências de proteína para frangas de postura de 1 a 18 semanas de idade

The objective of this experiment was to determine the protein requirements for hen pullets from 1 to 18 weeks of age, by factorial method, using the nitrogen balance and the comparative slaughtering techniques. Protein requirements for maintenance, was obtained by the nitrogen balance technique using four diets with different protein levels (18,9, 4 and 2% of CP) aiming to obtain positive balance, next to zero and negative nitrogen balance. The endogenous nitrogen losses (0.2575 g of N/kg·75/day) was obtained by regression of nitrogen balance (NB) on ingestion nitrogen (IN). The requirements of nitrogen for maintenance was estimated by the intercept of axis X (0.3831 g of N/kg·75/day). The slope of the straight line still supplied the efficiency of N of the diet (67.21%). The regression coefficients of the equation represented the requirements of net nitrogen for weight gain. Considering the conversion efficiencies of nitrogen of the diet into nitrogen for weight gain, the requirements of nitrogen were determined for weight gain of .065, .087g and .090 g of N per gram of weight gain, for the phases 1 to 6, 7 to 12, and 13 to 18 weeks of age, respectively. Based on the results, three equations of prediction of the daily nitrogen requirements were fitted in function of live weight (LW in kg) and daily weight gain (G in g): 1 to 6 weeks N=.3831 x BW·75 + G .065, 7 to 12 weeks N=.3831 × BW·75 + G .087, and 13 to 18 weeks N=.3831 × BW·75 + G .090.

Proteína da matriz do esmalte associada a R.T.G. e vidro bioativo no tratamento de furca grau III em cães

This study investigated, both histologically and histometrically, the efficacy of enamel matrix derived proteins (EMD) associated with bioactive glass (BG) and an absorbable membrane in the treatment of class III furcation defects in mongrel dogs. After surgical defect creation and chronification, the lesions were randomly divided into three groups according to the treatment employed: Test Group 1 - EMD + BG + membrane, Test Group 2 - EMD + membrane and Control Group - BG + membrane. After a 90-day healing period, the dogs were sacrificed. The descriptive analysis and the histometric data showed similar results for the experimental groups in all studied parameters (MANOVA, p > 0.05). The association of Emdogain® with bioglass and GTR, or with GTR only, showed similar results when compared with the ones obtained with bioglass associated with membrane in the treatment of class III furcation defects in dogs. The three modalities of treatment showed partial filling of the furcations, with bone and cementum regeneration limited to the apical portion of the defects.

eIF5A: Uma proteína essencial para a viabilidade celular cuja função permanece obscura

The putative translation initiation factor 5A (eIF5A) is a highly abundant and conserved protein in all eukaryotes and archaebacteria. This factor is essential for cell viability and is the only cellular protein known to contain the unusual amino acid residue hypusine. In Saccharomyces cerevisiae eIF5A is expressed in aerobic conditions by the gene TIF51A. Although eIF5A has been known for almost 30 years, the biological role of this protein is still obscure. This article reviews the research on the function of eIF5A, discussing the evidence for its involvement in various steps of mRNA metabolism, including translation initiation, nucleocytoplasmic transport and mRNA decay. Moreover, it indicates other studies that have associated eIF5A with cell proliferation and cell cycle progression. Finally, this review presents recent results obtained in our laboratory that reemphasize the role of eIF5A in the translation scenario. Further experiments will be necessary to define the role played by eIF5A in the translational machinery.