Role of glutamate in neuron-glia metabolic coupling.

The coupling between synaptic activity and glucose utilization (neurometabolic coupling) is a central physiologic principle of brain function that has provided the basis for 2-deoxyglucose-based functional imaging with positron emission tomography. Approximately 10 y ago we provided experimental evidence that indicated a central role of glutamate signaling on astrocytes in neurometabolic coupling. The basic mechanism in neurometabolic coupling is the glutamate-stimulated aerobic glycolysis in astrocytes, such that the sodium-coupled reuptake of glutamate by astrocytes and the ensuing activation of the Na(+)-K(+) ATPase triggers glucose uptake and its glycolytic processing, which results in the release of lactate from astrocytes. Lactate can then contribute to the activity-dependent fueling of the neuronal energy demands associated with synaptic transmission. Analyses of this coupling have been extended in vivo and have defined the methods of coupling for inhibitory neurotransmission as well as its spatial extent in relation to the propagation of metabolic signals within the astrocytic syncytium. On the basis of a large body of experimental evidence, we proposed an operational model, "the astrocyte-neuron lactate shuttle." A series of results obtained by independent laboratories have provided further support for this model. This body of evidence provides a molecular and cellular basis for interpreting data that are obtained with functional brain imaging studies.

RNA interference mitigates motor and neuropathological deficits in a cerebellar mouse model of machado-joseph disease.

Machado-Joseph disease or Spinocerebellar ataxia type 3 is a progressive fatal neurodegenerative disorder caused by the polyglutamine-expanded protein ataxin-3. Recent studies demonstrate that RNA interference is a promising approach for the treatment of Machado-Joseph disease. However, whether gene silencing at an early time-point is able to prevent the appearance of motor behavior deficits typical of the disease when initiated before onset of the disease had not been explored. Here, using a lentiviral-mediated allele-specific silencing of mutant ataxin-3 in an early pre-symptomatic cerebellar mouse model of Machado-Joseph disease we show that this strategy hampers the development of the motor and neuropathological phenotypic characteristics of the disease. At the histological level, the RNA-specific silencing of mutant ataxin-3 decreased formation of mutant ataxin-3 aggregates, preserved Purkinje cell morphology and expression of neuronal markers while reducing cell death. Importantly, gene silencing prevented the development of impairments in balance, motor coordination, gait and hyperactivity observed in control mice. These data support the therapeutic potential of RNA interference for Machado-Joseph disease and constitute a proof of principle of the beneficial effects of early allele-specific silencing for therapy of this disease.

Update Regarding Disproportionate Minority Contact (DMC) Progress of Iowa Communities, December 1, 2015

The Iowa State Court Administrator’s Office (SCA) created the CASP Advisory Committee in October 2013 to develop a state plan addressing disproportionate minority contact (DMC) in the juvenile justice system. The planning was assisted with a discretionary grant awarded from the federal Office of Juvenile Justice and Delinquency Prevention (OJJDP).

Les divers sens de la notion d'autonomie en médecine et leur pertinence en clinique [The various senses of autonomy and their relevance to clinical practice]

Since the introduction of the principle of respect of autonomy in medical ethics, the respect of the will of the patient occupied a central place in the decision-making process. To face up to the difficulties that appeared during the application of this principle in clinical medicine, Bruce Miller proposed in the early eighties one way to clarify the significance of this notion in the field of medical practice. He showed that the concept of autonomy can be understood under four senses which deserve to be explored in case of ethical conflict. This article shows, through the analysis of a clinical situation, the relevance of the approach suggested by this author and proposes to refer to this approach in case of ethical dilemmas in clinical practice.

CO2 Laser Cutting of Particleboard, HDF and MDF

The purpose of this thesis is to reveal how the laser cutting parameters influence lasercutting of particleboard, HDF and MDF. The literature review introduces the basic principle of CO2 laser, CO2 laser equipment and its usage in cutting of wood-based materials. The experimental part focuses on the discussion and analysis ofthe test data and attempts to draw conclusions on the influence of various parameters, including laser power, focal length of the lens and cutting gas, on the cutting speed and kerf quality. The tested materials include various thicknesses of particleboard, HDF and MDF samples. A TRUMPF TLF2700 HQ laser equipment was used for the experiments. To obtain valid data, the test samples must be completely cut through without any bonding of wood fibre. The maximum cutting speed is linear dependent on the laser power in thecondition that the other parameters are constant. For each thickness of a specific material type, there is a minimum laser power for cutting. Normally, the topand bottom kerf widths increase with the enhancement of laser power. There may be a critical laser power which can generate the minimum cross-sectional kerf width. Lens of larger focal length may achieve higher cutting speed. As the focal length becomes larger, the top kerf width tends to increase while the bottom andcross-sectional kerf widths to the opposite. Of all cutting gases, oxygen can help achieve higher cutting speed. The gas pressure of nitrogen does not seem to have strong influence on the cutting result. Generally, 2 bar air is more preferable for higher cutting speed. For particleboard and MDF samples of larger thickness than 12 mm, 2 bar argon can be used to reach remarkably higher cutting speed than the 5 bar. Generally, the 190.5 mm lens can produce smallest total kerf width. The kerf sides of thicker samples are darker than the thinner ones. The sample darkness tends to be lower as laser power increased. 63.5 mm lens seemed tocause more darkness than other lens. 5 bar cutting gases can produce less dark side kerfs than 2 bar ones. Oxygen normally causes darker kerfs than other gases. No distinct differences were found between nitrogen and argon.

Laser Cutting of Austenitic Stainless Steel with a High Quality Laser Beam

The thin disk and fiber lasers are new solid-state laser technologies that offer a combinationof high beam quality and a wavelength that is easily absorbed by metal surfacesand are expected to challenge the CO2 and Nd:YAG lasers in cutting of metals ofthick sections (thickness greater than 2mm). This thesis studied the potential of the disk and fiber lasers for cutting applications and the benefits of their better beam quality. The literature review covered the principles of the disk laser, high power fiber laser, CO2 laser and Nd:YAG laser as well as the principle of laser cutting. The cutting experiments were made with thedisk, fiber and CO2 lasers using nitrogen as an assist gas. The test material was austenitic stainless steel of sheet thickness 1.3mm, 2.3mm, 4.3mm and 6.2mm for the disk and fiber laser cutting experiments and sheet thickness of 1.3mm, 1.85mm, 4.4mm and 6.4mm for the CO2 laser cutting experiments. The experiments focused on the maximum cutting speeds with appropriate cut quality. Kerf width, cutedge perpendicularity and surface roughness were the cut characteristics used to analyze the cut quality. Attempts were made to draw conclusions on the influence of high beam quality on the cutting speed and cut quality. The cutting speeds were enormous for the disk and fiber laser cutting experiments with the 1.3mm and 2.3mm sheet thickness and the cut quality was good. The disk and fiber laser cutting speeds were lower at 4.3mm and 6.2mm sheet thickness but there was still a considerable percentage increase in cutting speeds compared to the CO2 laser cutting speeds at similar sheet thickness. However, the cut quality for 6.2mm thickness was not very good for the disk and fiber laser cutting experiments but could probably be improved by proper selection of cutting parameters.

Fiber Laser Cutting of Mild Steel

Fiber laser for materials processing have undergone a rapid development in the pastseveral years. As fiber laser provides a combination of high beam quality and awavelength that is easily absorbed by metal surfaces, the named future laser isexpected to challenge the CO2 and Nd:YAG lasers in the area of metal cutting. This thesis studied the performance of fiber laser cutting mild steel. In the literature review part, it introduced the laser cutting principle and the principle of fiber laser including the newest development of fiber laser cuttingtechnology. Because the fiber laser cutting mild steel is a very young technology, a preliminary test was made in order to investigate effect of the cutting parameters on cut quality. Then the formal fiber laser cutting experiment was madeby using 3 mm thickness S355 steel with oxygen as assistant gas. The experimentwas focused on the cut quality with maximum cutting speed and minimum oxygen gas pressure. And the cut quality is mainly decided by the kerf width, perpendicularity tolerance, surface roughness and striation patterns. After analysis the cutting result, several conclusions were made. Although the best result got in the experiment is not perfect as predicted, the whole result of the test can be accepted. Compared with CO2 laser, a higher cutting speed was achieved by fiber laser with very low oxygen gas pressure. A further improvement about the cutting quality might be possible by proper selection of process parameters. And in order to investigate the cutting performance more clearly, a future study about cutting different thickness mild steel and different shape was recommended.

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

The evolution of alternative splicing patterns and regulatory mechanisms

Alternative splicing produces multiple isoforms from the same gene, thus increasing the number of transcripts of the species. Alternative splicing is a virtually ubiquitous mechanism in eukaryotes, for example more than 90% of protein-coding genes in human are alternatively spliced. Recent evolutionary studies showed that alternative splicing is a fast evolving and highly species- specific mechanism. The rapid evolution of alternative splicing was considered as a contribution to the phenotypic diversity between species. However, the function of many isoforms produced by alternative splicing remains unclear and they might be the result of noisy splicing. Thus, the functional relevance of alternative splicing and the evolutionary mechanisms of its rapid divergence among species are still poorly understood. During my thesis, I performed a large-scale analysis of the regulatory mechanisms that drive the rapid evolution of alternative splicing. To study the evolution of alternative splicing regulatory mechanisms, I used an extensive RNA-sequencing dataset comprising 12 tetrapod species (human, chimpanzee and bonobo, gorilla, orangutan, macaque, marmoset, mouse, opossum, platypus, chicken and frog) and 8 tissues (cerebellum, brain, heart, kidney, liver, testis, placenta and ovary). To identify the catalogue of alternative splicing eis-acting regulatory elements in the different tetrapod species, I used a previously defined computational approach. This approach is a statistical analysis of exons/introns and splice sites composition and relies on a principle of compensation between splice sites strength and the presence of additional regulators. With an evolutionary comparative analysis of the exonic eis-acting regulators, I showed that these regulatory elements are generally shared among primates and more conserved than non-regulatory elements. In addition, I showed that the usage of these regulatory elements is also more conserved than expected by chance. In addition to the identification of species- specific eis-acting regulators, these results may explain the rapid evolution of alternative splicing. I also developed a new approach based on evolutionary sequence changes and corresponding alternative splicing changes to identify potential splicing eis-acting regulators in primates. The identification of lineage-specific substitutions and corresponding lineage-specific alternative splicing changes, allowed me to annotate the genomic sequences that might have played a role in the alternative splicing pattern differences among primates. Finally, I showed that the identified splicing eis-acting regulator datasets are enriched in human disease-causing mutations, thus confirming their biological relevance.

Environmental requirements and environmental management system of boiler plant supplier

Työn tärkeimpänä tavoitteena oli edistää ympäristöjärjestelmän laatimista Kvaerner Pulping, Power divisioonan Kattilat-liiketoimintayksikölle. Lisäksi tavoitteena oli tarkastella yritykseen kohdistuvia ympäristövaatimuksia ja niiden vaikutusta yrityksen toimintaan. Aluksi työssä tarkasteltiin ympäristöjärjestelmästandardien sisältöjä ja niiden eroja. Työssä käsiteltiin myös erilaisia elinkaarijohtamisen malleja, joita voidaan hyödyntää yrityksen kokonaisvaltaisessa ympäristöjärjestelmässä. Työssä tarkasteltiin myös sidosryhmien vaikutusta yrityksen ympäristötoimintaan. Kattilalaitostoimittajan tärkeimpiä asiakkaita ovat sellu- ja paperiteollisuus. Näihin yrityksiin on kohdistunut runsaan kymmenen vuoden aikana paineita ympäristötoiminnan tehostamiseksi. Tämän kehityksen seurauksena vastaavat tehostamispaineet ovat siirtymässä myös alihankkijoille, kuten kattilaitostoimittajille. Tehokkaan ympäristöjohtamisen takaamiseksi työssä määriteltiin ympäristövastuut ja –valtuudet sekä ympäristöpäämäärät ja –tavoitteet. Lisäksi tunnistettiin yrityksen toimintaan liittyvät ympäristönäkökohdat ja –riskit. Työn yhteydessä laadittiin ympäristöjärjestelmän luonnos, ja se sisältää jatkuvan parantamisen periaatteen. Työn yhteydessä laadittiin lisäksi Kvaerner Pulping Oy:n koelaitokselle ympäristölupahakemus. Työssä on kuvattu koelaitosta ja sen ympäristölupahakemukseen liittyviä asioita esimerkkinä parantuneesta ympäristöasioiden hoidosta.

The contribution of individual and professional characteristics to general and work-related well-being

Cette thèse porte sur la contribution des caractéristiques individuelles et des situations professionnelles au bien-être. En combinant différentes perspectives théoriques, notamment la théorie de la construction de la carrière, la théorie de la justice organisationnelle, les modèles du bien-être au travail, et les conceptualisations de l'incivilité au travail, un certain nombre d'hypothèses sont proposées concernant le lien entre certaines caractéristiques individuelles et situationnelles et le bien-être général et professionnel. Les deux premières études se focalisent sur la validation d'une échelle d'adaptabilités de carrière et sur le rôle médiateur de cette adaptabilité dans la relation entre des dispositions et le bien-être. La troisième étude évolue l'hypothèse d'un possible effet de médiation de l'adaptabilité mais cette fois de la relation entre insécurité professionnelle et charge de travail d'une part et le bien-être d'autre part. La quatrième étude adopte une perspective longitudinale et analyse les associations entre les dimensions de la personnalité, l'adaptabilité de carrière et le bien-être dans quatre parcours professionnels différents. La cinquième étude porte sur une autre caractéristique individuelle, à savoir la croyance en un monde juste. Cette étude illustre comment la croyance en un monde juste influence les perceptions de justice organisationnelle une année après, qui ont une incidence importante sur le bien-être. Enfin, la dernière étude se concentre sur une population spécifique, les immigrants en Suisse, et souligne qu'être la cible d'incivilité sur le lieu de travail est généralement liée au pays d'origine. Globalement, cette thèse met en évidence que les caractéristiques individuelles ont des effets tant directs qu'indirects sur le bien-être et que ces mêmes caractéristiques explique en partie, les relations entre la situation professionnelle et le bien-être. Plus spécifiquement, des situations professionnelles peuvent influencer l'expression de certaines caractéristiques individuelles, soit en contribuant à leurs activations ou à leurs inhibitions. De plus, l'impact des caractéristiques individuelles sur le bien-être semble dépendre de la situation professionnelle. Il est donc important de considérer les influences simultanées et réciproques des caractéristiques individuelles et de la situation contextuelle et professionnelle pour rendre compte du bien-être général et professionnel. -- This thesis explores how individual characteristics and professional situations correspond to well-being. Drawing from various theoretical backgrounds, such as career construction theory, justice theory, models of job strain, and theories on subtle discrimination, a number of specific hypotheses are put forward pertaining to a selection of individual and professional aspects as well as general and work-related well-being. The six studies presented in this thesis focus on specific aspects and adopt different methodological and theoretical approaches. The first two studies concern the validation of the career adapt-abilities scale and test the potential of career adapt-abilities to mediate the relationship between dispositions and outcomes. The third study extends the hypothesis of career adapt-abilities as a mediator and finds that it mediates the effects of job insecurity and job strain on general and professional well-being. The fourth study adopts a longitudinal approach and tests the associations between personality traits and career adaptability and well-being in four different professional situations. Study five concerns another individual characteristic, belief in a just world, and illustrates how justice beliefs drive perceptions of organizational justice, which in turn impact, on well-being outcomes one year later. The final study focuses on the professional experiences of a specific population, immigrants in Switzerland, and confirms that being a target of incivilities is related to national origin. Globally, this thesis finds that individual characteristics have direct and indirect influences on well-being and that these characteristics may also mediate the associations between professional situations and outcomes. In particular, the professional situation may alter the display of individual characteristics, either by contributing to their activation or their depletion, and the ways in which individual factors influence well-being does seem to depend on the professional situation. It is thus necessary to adopt a "both...and" perspective when studying the impact of individual and professional characteristics as these factors mutually influence each other.

The Swiss reform of the allocation of tasks : The conventions-programs as a new partnership model for vertical cooperation ?

This research examines the impacts of the Swiss reform of the allocation of tasks which was accepted in 2004 and implemented in 2008 to "re-assign" the responsibilities between the federal government and the cantons. The public tasks were redistributed, according to the leading and fundamental principle of subsidiarity. Seven tasks came under exclusive federal responsibility; ten came under the control of the cantons; and twenty-two "common tasks" were allocated to both the Confederation and the cantons. For these common tasks it wasn't possible to separate the management and the implementation. In order to deal with nineteen of them, the reform introduced the conventions-programs (CPs), which are public law contracts signed by the Confederation with each canton. These CPs are generally valid for periods of four years (2008-11, 2012-15 and 2016-19, respectively). The third period is currently being prepared. By using the principal-agent theory I examine how contracts can improve political relations between a principal (Confederation) and an agent (canton). I also provide a first qualitative analysis by examining the impacts of these contracts on the vertical cooperation and on the implication of different actors by focusing my study on five CPs - protection of cultural heritage and conservation of historic monuments, encouragement of the integration of foreigners, economic development, protection against noise and protection of the nature and landscape - applied in five cantons, which represents twenty-five cases studies.

Inference of Evolutionary Forces Acting on Human Biological Pathways.

Because natural selection is likely to act on multiple genes underlying a given phenotypic trait, we study here the potential effect of ongoing and past selection on the genetic diversity of human biological pathways. We first show that genes included in gene sets are generally under stronger selective constraints than other genes and that their evolutionary response is correlated. We then introduce a new procedure to detect selection at the pathway level based on a decomposition of the classical McDonald-Kreitman test extended to multiple genes. This new test, called 2DNS, detects outlier gene sets and takes into account past demographic effects and evolutionary constraints specific to gene sets. Selective forces acting on gene sets can be easily identified by a mere visual inspection of the position of the gene sets relative to their two-dimensional null distribution. We thus find several outlier gene sets that show signals of positive, balancing, or purifying selection but also others showing an ancient relaxation of selective constraints. The principle of the 2DNS test can also be applied to other genomic contrasts. For instance, the comparison of patterns of polymorphisms private to African and non-African populations reveals that most pathways show a higher proportion of nonsynonymous mutations in non-Africans than in Africans, potentially due to different demographic histories and selective pressures.

Suomalaisten osakeyhtiöiden mahdollisuus vaikuttaa verotukseensa ETA-alueella

Tutkielmassa on selvitetty suomalaisten osakeyhtiöiden mahdollisuuksia vaikuttaa liiketoimintansa Euroopan talousalueella (ETA). Tutkielmassa on tarkasteltu EY:n sääntelyä, EY-tuomioistuimen tuomitsemia ennakkotapauksia ja niiden vaikutuksia Suomen lainsäädäntöön suomalaisten osakeyhtiöiden kannalta. Tutkielma osoittaa yhteisön ylikansallisen ohjauksen vaikuttaneen kansalliseen lainsäädäntöön, mikä on tarjonnut suomalaisille osakeyhtiöille uusia mahdollisuuksia kehittää liiketoimintaansa verotuksen ja veroneutraalien yritysjärjestelyiden osalta ETA-alueella. EY-tuomioistuin on tuomioissaan kuitenkin jättänyt tiettyjä oikeuttamisperusteita jäsenvaltioille. Niiden perusteella valtiot voivat vaikuttaa osakeyhtiöiden verotukseen ja veroneutraaleihin yritysjärjestelyihin ETA-alueella, vaikka oikeuttamisperusteet lähtökohtaisesti rikkovat ylikansallista sääntelyä. EY:n ylikansallinen ohjaus tulee myös tulevaisuudessa vaikuttaa merkittävästi suomalaisten osakeyhtiöiden mahdollisuuteen harjoittaa liiketoimintaansa ETA-alueella. Ylikansallisen sääntelyn hyödyntäminen täysimääräisesti mahdollistuu suomalaisissa osakeyhtiöissä vasta, kun yhteisön alueelle luodaan yhtenäinen sääntely kaikkia osakeyhtiöitä kohtaan.

Une justice plus commerciale qu'industrielle ? Comparaison des attentes d'une « bonne justice » en Suisse

Le but de cet article est triple. D'abord, nous identifions les qualités d'une bonne justice en Suisse, telles que défi nies par les différents acteurs qui forment le tribunal au sens large (juges, gestionnaires de tribunaux, avocats, journalistes, politiciens). Deuxièmement, nous vérifions si ces qualités peuvent coexister avec les valeurs véhiculées par le monde managérial (NGP). Enfin, nous évaluons la manière dont elles cohabitent (hybridation, dominance des unes sur les autres, etc.). Pour ce faire, nous avons analysé une série d'entretiens (56) semi-structurés menés dans des tribunaux de première et seconde instance dans des cours civiles, administratives et criminelles, dans les trois régions linguistiques du pays. Les résultats montrent que les groupes d'acteurs interviewés ont des attentes relativement similaires et qu'elles ne semblent pas être incompatibles avec celles de l'univers managérial. Cependant, lorsqu'ils décrivent la bonne justice, les participants font plus souvent appel à des notions liées au monde commercial qu'au monde industriel contrairement à d'autres études menées auprès d'employés du secteur public suisse, mais dans la lignée de ceux du Québec. L'article ouvre la voie à des recherches ultérieures dont l'objectif sera de tester ces conclusions. Abstract The purpose of this paper is threefold. First, we identify the qualities of good justice in Switzerland, as defi ned by the various actors who form the tribunal in a broad sense (judges, court managers, lawyers, journalists, politicians). Second, we verify if these qualities are compatible with the values conveyed by the managerial universe (NPM). Finally, we evaluate how they coexist (hybridization, dominance over each other, etc.). To do this, we analysed a series of semi-structured interviews (56) conducted in tribunals of fi rst and second instance in civil, administrative,and criminal courts in the three linguistic regions of the country. The results show that the groups of actors interviewed have relatively similar expectations that do not seem to be incompatible with those of the managerial world. However, when describing good justice, the participants refer more frequently to concepts related to the commercial than the industrial world, contrary to other Swiss public servants but in line with those of Quebec, as uncovered by former studies. The article opens up the path to further research whose objective will be to test those conclusions.